Observation of metastable states in a superconducting Josephson circuit using an Andreev interferometer

Andrea Iagallo

Published Jan 1, 2011• 0 citations

Abstract

We report on measurements of macroscopic quantum states in superconducting Josephson circuits using a highly sensitive hybrid quantum interferometer as the readout probe. The investigated Josephson circuit is one of the leading candidates as solid-state qubits (persistent current qubit), which are known to exhibit macroscopic quantum states with atomic-like properties. The readout device is a modified Andreev interferometer with semi-metallic normal segment in a “folded" geometry, and is designed to reduce the back action during measurement, as well as minimising the electromagnetic coupling between the circuit and the environment.\n A pulsed lock-in technique has been developed to perform continuous readout of the superconductor phase difference using pulse lengths down to 10 ns. The technique enables to control the energy of the probing quasiparticles in the normal segment of the interferometer, which in turn allows to control of the supercurrent owing in the SNS junction and prevents electron heating of the normal segment.\n An experimental set-up was designed and installed in a dilution fridge consisting of shielded wiring, magnetic screens, RF tight sample holder and printed circuit board to allow the injection of high frequency excitation signals, while minimising the environment effect on the qubit through careful electrical filtering. The effect of strong RF irradiation on Andreev interferometers allowed us to estimate the response time of the readout device to be less than 40 ps.\n The measurements show that two macroscopically distinct metastable states exist when the device is biased at the qubit degeneracy point, between which the system makes transitions that can be continuously monitored. Real time kinetics of the system has been investigated at different magnetic fluxes, pulse parameters, temperature and RF radiation. Based on statistical analysis of the transitions, we argue that the metastability is connected with macroscopic quantum tunnelling effects rather than thermal excitation. The experimental data support the hypothesis of a large low frequency noise causing low transition rates.

Related papers

Andreev Probe of Persistent Current States in Superconducting Quantum Circuits

Victor T. Petrashov, K. G. Chua, K. M. Marshall +2 more

Using the extraordinary sensitivity of Andreev interferometers to the superconducting phase difference associated with currents, we measure the persistent current quantum states in superconducting loops interrupted by Josephson junctions. Straightforward electrical resistance measurements of the interferometers give a continuous readout of the states, allowing us to construct the energy spectrum of the quantum circuit. The probe is estimated to be more precise and faster than previous methods, and can measure the local phase difference in a wide range of superconducting circuits.

arXiv:cond-mat/0503061Physical Review LettersSep 27, 200518 citations

Coherent processes in Superconducting quantum interferometers and qubits

J. Lantz

In this thesis we present theoretical investigations of the effects of Andreev bound states on the current transport in superconducting interferometers. We also investigate the slow dynamics of the Andreev states in a superconducting point contact, and the possible application as a quantum bit. We consider superconductor-normal metal-superconductor (SNS) and normal metalsuperconductor (NS) interferometers, where the contact region is a Y-shaped normal metal wave guide, and the two connection points to the same superconducting electrode can have different phases. The electric current in the interferometer is calculated as a function of the applied voltage and the phase difference . Andreev reflection in SNS and NS interferometers incorporates two features: interference in the arms of the Y-shaped normal region, and interplay with Andreev resonances. The latter feature yields rich phase dependent current structures in the subgap voltage region. The interference effect leads to a suppression of the current structures at . We investigate the effects on the Josephson current in NS interferometers due to current injection from the normal electrode. The two main effects of the nonequilibrium situation are: nonequilibrium population of the Andreev levels, which can result in enhancement, suppression, or even sign reversal of the Josephson current, and an anomalous interference Josephson effect, which gives rise to a long range Josephson effect, increasing with the voltage up to the superconducting gap . The two Andreev states in a superconducting quantum point contact can be accessed for manipulation and measurement by embedding the point contact in a superconducting loop. We calculate an effective Hamiltonian for the slow dynamics of the Andreev two-level system in the ring. Furthermore, we discuss methods of manipulation of the Andreev levels, and coupling of qubits. The state of the Andreev two-level system can be read out by monitoring the macroscopic quantum tunneling in a current biased Josephson junction, which is embedded in the superconducting ring of the qubit. We discuss the effects on the qubit, the readout scheme and the signal-to-noise ratio. THESIS FOR THE DEGREE OF DOCTOR OF PHILOSOPHY Coherent processes in Superconducting quantum interferometers and qubits

Jan 1, 20020 citations

Circuit Quantum Electrodynamics with Flux Qubits

Jean-Luc Orgiazzi

This thesis presents circuit quantum electrodynamic (cQED) experiments done with artificial atoms coupled to a high quality factor superconducting microwave resonator. This work discusses the theoretical framework, design, fabrication, implementation and characterization of a multi-qubit system using superconducting persistent current qubits, often referred as flux qubits. \n \nWe developed a new type of cryogenic aid for fast turnaround microwave experiments. The minimum turnaround time to perform microwave experiments in dilution refrigerators is typically a few days, as required by cooling down and warming up the entire refrigerator. The cryogenic microwave payload and wiring needed for each qubit and resonator add a significant heat load to \nthe system which typically only has a few µW s of cooling power at millikelvin temperatures. We present a new experimental approach we developed in which a suitable sample holder is attached to a cold-insertable probe and brought in contact with transmission lines permanently mounted inside the cryostat. The total turnaround time is reduced to 8 hours if the target temperature is 80 mK. This new measurement method increased our ability to successfully identify good devices with fast design-characterization iterations, while allowing months-long measurements at 30 mK. \n \nOur device architecture uses several qubits, each of which is controlled via on-chip fast flux bias lines. Readout of the qubit’s quantum state is performed by homodyne detection of the resonator field at large driving power. We observe long coherence times at the optimal bias point of the flux qubits and present decoherence measurements around this optimal point, where the \nflux qubits couple mostly to magnetic flux noise. Dynamical decoupling techniques employing fast microwave pulses are used to protect the qubit’s coherence and allow calculating the magnetic flux noise power spectral density of the qubit’s environment. Photon-mediated interaction between distant qubits in the resonator allows the implementation of a two-qubit controlled-NOT gate \nusing the selective darkening technique. \n \nThis multi-qubit superconducting design is an interesting platform to study the decoherence properties of flux qubits, the properties of strong interaction of electromagnetic radiation with macroscopic quantum systems. These results demonstrate the potential of cQED as a platform for fundamental investigations of decoherence and quantum dynamics of flux qubits.

Sep 23, 20190 citations

Pulse and Hold Switching Current Readout of Superconducting Quantum Circuits

Jochen Walter

Josephson junction qubits are promising candidates for a scalable quantum processor. Such qubits are commonly manipulated by means of sequences of rf-pulses and different methods are used to determine their quantum state. The readout should be able to distinguish the two qubit states with high accuracy and be faster than the relaxation time of the qubit. We discuss and experiment with a readout method based on the switching of a Josephson junction from the zero voltage state to a finite voltage state. The Josephson junction circuit has a non-linear dynamics and when it is brought to a bifurcation point, it can be made arbitrarily sensitive to small perturbations. This extreme sensitivity at a bifurcation point can be used to distinguish the two quantum states if the topology of the phase space of the circuit leads to a quick separation into the final states where re-crossings of the bifurcation point are negligible. We optimize a switching current detector by analyzing the phase space of a Josephson junction circuit with frequency dependent damping. A pulse and hold technique is used where an initial current pulse brings the junction close to its bifurcation point and the subsequent hold level is used to give the circuit enough time to evolve until the two states can be distinguished by the measuring instrument. We generate the pulse and hold waveform by a new technique where a voltage step with following linear voltage rise is applied to a bias capacitor. The frequency dependent damping is realized by an on-chip RC-environment fabricated with optical lithography. Josephson junction circuits are added on by means of e-beam lithography. Measurements show that switching currents can be detected with pulses as short as 5 ns and a resolution of 2.5% for a sample directly connected to the measurement leads of the cryostat. Detailed analysis of the switching currents in the RC-environment show that pulses with a duration of 20 us can be explained by a generalization of Kramers' escape theory, whereas switching the same sample with 25 ns pulses occurs out of thermal equilibrium, with sensitivity and speed adequate for qubit readout.

Jan 1, 20061 citation

Macroscopic quantum device based on a rf SQUID system

C. Granata, Valentina Corato, Luigi Longobardi +4 more

The growing amount of theoretical interest in the area of quantum computing have stimulated in recent years research with the aim of developing a corresponding technology. Superconducting Josephson systems appear to be among the most promising candidates. We present the characterization of a fully integrated Josephson device consisting of an RF SQUID coupled to a readout system based on a dc SQUID sensor. We report measurements of the dc SQUID performances showing a high intrinsic responsivity and a low flux noise, giving a good signal to noise ratio in the small signal mode. In the classical regime data on the decay rate from the metastable flux states of RF SQUID are also reported. The low dissipation level and the good insulation of the probe from the external noise are encouraging in view of macroscopic quantum experiments. Work is in progress to improve the design of the device to increase its application capability toward the quantum regime.

IEEE Transactions on Applied SuperconductivityJun 1, 20032 citations

Hybrid circuit QED with spin ensembles and carbon-nanotube-based superconducting qubits

Matthias Mergenthaler

Circuit quantum electrodynamics has received an increasing amount of attention over the last decade in light of its potential use in quantum information processing. The underlying principle of this architecture is the coherent coupling between microwave photons stored in superconducting resonators and superconducting qubits made from non-linear, non-dissipative electrical circuits. This architecture can be extended to other solid-state systems with transition frequencies in the microwave regime, such as nuclear and electron spins or Andreev bound states. These hybrid devices would allow the coherent exchange of information between such systems and superconducting qubits mediated by a microwave resonator. This could lead to advances in quantum information processing and new insights in the physics governing these interacting systems. In this dissertation experimental work with different types of hybrid quantum circuits is presented. A first experiment investigates the coherent coupling of microwave photons with a spin ensemble in a correlated and uncorrelated state. The coupling strength and magnetic resonance is studied as a function of temperature and magnetic field direction. A pronounced temperature dependent anisotropy of the magnetic resonance is observed, which can be attributed to the onset of antiferromagnetic correlations in the spin ensemble when cooled below T=4 K. A simple one-dimensional model gives a good description of this anisotropy. A next experiment studies the transport characteristics of carbon nanotubes electrically accessed with normal and superconducting contacts. These devices were characterised using both DC and RF reflectometry techniques. The carbon nanotube devices with superconducting contacts exhibit transport characteristics of Josephson junctions with critical currents of up to Ic~18 nA, as well as multiple Andreev reflections. These semiconductor-superconductor hybrid Josephson junctions are then used to realise a carbon-nanotube-based superconducting qubit with voltage tunable transition frequency using a local electrostatic gate. Strong coupling (g~100 MHz) to a coplanar waveguide resonator is demonstrated via a resonator frequency shift dependent on applied gate voltage. Qubit parameters are extracted from spectroscopy and correspond well to the DC measurements of the carbon nanotube Josephson junctions. Qubit relaxation and coherence times in the range 10-100 ns are observed. The hybrid devices investigated in this work present potential building blocks for more extensive hybrid architectures for quantum information processing.

Jan 1, 20180 citations