Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Thermal Phase Noise and the Temperature Ceiling for Reliable Fifth-Coordinate Readout

William Alexander Aldred

Published Nov 11, 2026• 0 citations
Publisher

Abstract

Thermal agitation blurs any coordinate held in a potential, and the phase coordinate is no exception. This paper models the phase as held by a harmonic stiffness kappa = 4.142e-17 J per rad^2, calibrated so the thermal phase spread is 0.01 rad at 300 K, and computes the temperature ceiling for reliable readout. The spread reaches the 0.0667 rad budget only at 13347 K, and a stricter 0.02 rad working margin holds up to 1200 K. At 4000 K the spread is still only 0.0365 rad. Under the stated stiffness, thermal noise is therefore not the limiting factor for phase readout at any ordinary operating temperature; cryogenics are unnecessary for this purpose, and readout error budgets should be assigned to dispersion and drift instead. Computed from stated assumptions; not measured. SIMULATED, NOT MEASURED.

DOI
10.5281/zenodo.24123569

Related papers

A Fifth-Coordinate Phase Interferometer: Atom-Optical Readout of Extra-Coordinate Displacement with Computed Resolution

William Alexander Aldred

An interferometer whose arms are arranged to cancel ordinary displacement can retain sensitivity to displacement along a compact fifth coordinate, which appears as a residual phase that common-mode rejection does not remove. This paper specifies such an instrument on the platform of a Raman atom interferometer, with a stated extra-coordinate coupling of five per cent of the optical wavevector product. Quantum projection noise and technical phase noise together give a computed extra-coordinate resolution of 3.75e-09 metres per root hertz; the unambiguous range before phase wrapping is 7.80e-06 metres of extra-coordinate displacement; and integration to a resolution of 1e-11 metres requires 39.1 hours at the stated cycle rate. The design includes the vibration-isolation, wavefront, and rotation-compensation provisions needed to keep the ordinary-displacement channel below the residual channel. SIMULATED, NOT MEASURED: the performance figures are computed from stated assumptions and no apparatus has been operated.

•Nov 11, 2026•1 citation

Design Blueprint: A Fifth-Coordinate Phase Interferometer: Atom-Optical Readout of Extra-Coordinate Displacement with Computed Resolution

William Alexander Aldred

Design blueprint derived from the source paper (DOI 10.5281/zenodo.24129538): An interferometer whose arms are arranged to cancel ordinary displacement can retain sensitivity to displacement along a compact fifth coordinate, which appears as a residual phase that common-mode rejection does not remove. Status: DESIGN BLUEPRINT — SIMULATED, NOT MEASURED — NOT BUILT. All numbers are simulated values from the source paper's computation, deposited with this blueprint as compute.py and results.json. AI-use disclosure: Dave, an AI research system, assisted with the computation and drafting under the author's direction; author of record William Alexander Aldred.

•Nov 11, 2026•0 citations

The Quantum Noise Fraction and the addressable fraction in High-Frequency Gravitational Wave Detection

Sergio Gaudio

The quantum noise fraction $β$, the share of a detector's noise power that is quantum in origin, sets a ceiling $\mathcal{E}_{\mathrm{max}} = 1/\sqrt{1-β}$ on the sensitivity improvement that removing quantum-origin noise can yield. In the kHz--GHz band the readout degree of freedom is a bosonic mode and $β= 1/(2\bar{n}_{\mathrm{th}}+1)$, with $\bar{n}_{\mathrm{th}}$ the Bose--Einstein occupation. Quantum noise then dominates only on the cold side of the thermal frontier $k_BT\ln 3 = \hbarω$ (above 229 MHz at 10 mK), which governs mechanical resonators and electromagnetic cavities alike; a real readout turns it into a joint condition on the occupation and on the excess noise of the readout chain. On a multimode acoustic antenna the frontier can be observed within one device, since the logarithmic slope of $\sqrt{S_hQ}$ along the odd-overtone comb increases by one half across it whatever the dependence of the quality factor on overtone number. On this antenna, crossing the frontier costs more in classical sensitivity than quantum enhancement returns. For a GHz mode of an existing bulk acoustic wave device at 10 mK, $β= 0.984$ and $\mathcal{E}_{\mathrm{max}} = 7.8$. That ceiling cannot be reached with a linear readout, because with intrinsic damping the zero-point term is the force noise of the bath, fixed by the fluctuation--dissipation theorem. The addressable fraction $β_a$ excludes it: at the standard quantum limit the same mode has $β= 0.992$ but $β_a = 0.496$, an available improvement of 1.41 against a ceiling of 11.0. An array of $10^4$ such devices cross-correlated for one year reaches $3.6\times 10^{-24}$ Hz$^{-1/2}$ for an integration bandwidth equal to the linewidth; even granting $\mathcal{E}_{\mathrm{max}} = 7.8$ in full, a factor $1.0\times 10^{10}$ above the big-bang-nucleosynthesis bound remains, and it is classical.

gr-qcCross-listedarXiv:2605.00053•May 1, 2026

The Cryogenic Paradox: A Methodological Manifesto Inverting the Quantum Noise Paradigm via Cesium-Phase Displacement

Antony John Sargent

Current quantum computing and biophysical isolation paradigms rely heavily on subKelvin cryogenic cooling (< 20 mK) to suppress environmental phase noise and preventqubit decoherence. This manifesto outlines the fundamental flaw of the cryogenic approach:forcing a physical lattice to near-zero temperatures reduces thermal distortion at the costof inducing an unnatural mechanical rigidity, suppressing native atomic momentum andtrapping localized readout heat. Project Resonance proposes a structural inversion. Byentirely displacing the physical material lattice from the chamber’s interior and replacingit with an unyielding, highly coherent Cesium-133 atom frequency field within a GlancingAngle Deposition (GLAD) chamber, we establish a room-temperature isolation zone. Here,superposition is protected not by freezing the environment, but by geometric phase-locking(R → 1), making quantum states invisible to the chaotic observer of ambient noise.

•Jun 18, 2026•0 citations

MMA Memo 161 Receiver Noise Temperature, the Quantum Noise Limit, and the Role of the Zero-Point Fluctuations *

Anthony R. Kerr, M. J. Feldman

There are in use at present three different ways of deducing the receiver noise temperature TR from the measured Y-factor, each resulting in a different value of TR. The methods differ in the way the physical of the hot and cold loads, Th and Tc (usually room temperature and liquid nitrogen), are converted into radiated power temperatures to deduce TR from Y. Only one of these methods is consistent with Tucker's quantum mixer theory and the constraints of Heisenberg's uncertainty principle. The paper also examines the minimum system noise achievable with single- and double-sideband receivers.

•Jan 1, 1997•1 citation

High-Frequency Thermal Noise in Michelson Interferometers

Daniel Graß, S. M. Vermeulen, I. A. O. MacMillan +1 more

Thermal noise in optics constrains the precision of optical experiments, including Michelson interferometers, optical clocks, and optomechanical sensors. While high-power optical experiments such as gravitational-wave detectors are currently limited mainly by quantum noise, new experiments incorporating recent insights from quantum metrology are being developed that evade the quantum shot noise background. In particular, Michelson interferometers that use photon-counting readout will look for weak, high-frequency signals. Since shot noise is no longer the dominant noise source with these readout schemes, it is important to accurately model thermal noise to characterize signals and design more sensitive experiments. However, previous modeling uses approximations that are no longer valid in these frequency regimes. In the MHz band, the quasistatic approximation does not apply. We therefore develop more general models of substrate and coating mechanical (Brownian) noise, substrate and coating thermoelastic noise, and coating thermorefractive noise. We validate the models with comparisons to previous low-frequency modeling and high-frequency spectra from an experiment that has already taken data, the Holometer. We then apply the new models to GQuEST, an experiment under construction.

arXiv:2605.16710•May 15, 2026•0 citations
Thermal agitation blurs any coordinate held in a potential, and the phase coordinate is no exception. This paper models the phase as held by a harmonic stiffness kappa = 4.142e-17 J per rad^2, calibrated so the thermal phase spread is 0.01 rad at 300 K, and computes the temperature ceiling for reliable readout. The spread reaches the 0.0667 rad budget only at 13347 K, and a stricter 0.02 rad working margin holds up to 1200 K. At 4000 K the spread is still only 0.0365 rad. Under the stated stiffness, thermal noise is therefore not the limiting factor for phase readout at any ordinary operating temperature; cryogenics are unnecessary for this purpose, and readout error budgets should be assigned to dispersion and drift instead. Computed from stated assumptions; not measured. SIMULATED, NOT MEASURED.
An interferometer whose arms are arranged to cancel ordinary displacement can retain sensitivity to displacement along a compact fifth coordinate, which appears as a residual phase that common-mode rejection does not remove. This paper specifies such an instrument on the platform of a Raman atom interferometer, with a stated extra-coordinate coupling of five per cent of the optical wavevector product. Quantum projection noise and technical phase noise together give a computed extra-coordinate resolution of 3.75e-09 metres per root hertz; the unambiguous range before phase wrapping is 7.80e-06 metres of extra-coordinate displacement; and integration to a resolution of 1e-11 metres requires 39.1 hours at the stated cycle rate. The design includes the vibration-isolation, wavefront, and rotation-compensation provisions needed to keep the ordinary-displacement channel below the residual channel. SIMULATED, NOT MEASURED: the performance figures are computed from stated assumptions and no apparatus has been operated.
Design blueprint derived from the source paper (DOI 10.5281/zenodo.24129538): An interferometer whose arms are arranged to cancel ordinary displacement can retain sensitivity to displacement along a compact fifth coordinate, which appears as a residual phase that common-mode rejection does not remove. Status: DESIGN BLUEPRINT — SIMULATED, NOT MEASURED — NOT BUILT. All numbers are simulated values from the source paper's computation, deposited with this blueprint as compute.py and results.json. AI-use disclosure: Dave, an AI research system, assisted with the computation and drafting under the author's direction; author of record William Alexander Aldred.
The quantum noise fraction βββ, the share of a detector's noise power that is quantum in origin, sets a ceiling Emax=1/1−β\mathcal{E}_{\mathrm{max}} = 1/\sqrt{1-β}Emax​=1/1−β​ on the sensitivity improvement that removing quantum-origin noise can yield. In the kHz--GHz band the readout degree of freedom is a bosonic mode and β=1/(2nˉth+1)β= 1/(2\bar{n}_{\mathrm{th}}+1)β=1/(2nˉth​+1), with nˉth\bar{n}_{\mathrm{th}}nˉth​ the Bose--Einstein occupation. Quantum noise then dominates only on the cold side of the thermal frontier kBTln⁡3=ℏωk_BT\ln 3 = \hbarωkB​Tln3=ℏω (above 229 MHz at 10 mK), which governs mechanical resonators and electromagnetic cavities alike; a real readout turns it into a joint condition on the occupation and on the excess noise of the readout chain. On a multimode acoustic antenna the frontier can be observed within one device, since the logarithmic slope of ShQ\sqrt{S_hQ}Sh​Q​ along the odd-overtone comb increases by one half across it whatever the dependence of the quality factor on overtone number. On this antenna, crossing the frontier costs more in classical sensitivity than quantum enhancement returns. For a GHz mode of an existing bulk acoustic wave device at 10 mK, β=0.984β= 0.984β=0.984 and Emax=7.8\mathcal{E}_{\mathrm{max}} = 7.8Emax​=7.8. That ceiling cannot be reached with a linear readout, because with intrinsic damping the zero-point term is the force noise of the bath, fixed by the fluctuation--dissipation theorem. The addressable fraction βaβ_aβa​ excludes it: at the standard quantum limit the same mode has β=0.992β= 0.992β=0.992 but βa=0.496β_a = 0.496βa​=0.496, an available improvement of 1.41 against a ceiling of 11.0. An array of 10410^4104 such devices cross-correlated for one year reaches 3.6×10−243.6\times 10^{-24}3.6×10−24 Hz−1/2^{-1/2}−1/2 for an integration bandwidth equal to the linewidth; even granting Emax=7.8\mathcal{E}_{\mathrm{max}} = 7.8Emax​=7.8 in full, a factor 1.0×10101.0\times 10^{10}1.0×1010 above the big-bang-nucleosynthesis bound remains, and it is classical.
Current quantum computing and biophysical isolation paradigms rely heavily on subKelvin cryogenic cooling (< 20 mK) to suppress environmental phase noise and preventqubit decoherence. This manifesto outlines the fundamental flaw of the cryogenic approach:forcing a physical lattice to near-zero temperatures reduces thermal distortion at the costof inducing an unnatural mechanical rigidity, suppressing native atomic momentum andtrapping localized readout heat. Project Resonance proposes a structural inversion. Byentirely displacing the physical material lattice from the chamber’s interior and replacingit with an unyielding, highly coherent Cesium-133 atom frequency field within a GlancingAngle Deposition (GLAD) chamber, we establish a room-temperature isolation zone. Here,superposition is protected not by freezing the environment, but by geometric phase-locking(R → 1), making quantum states invisible to the chaotic observer of ambient noise.
There are in use at present three different ways of deducing the receiver noise temperature TR from the measured Y-factor, each resulting in a different value of TR. The methods differ in the way the physical of the hot and cold loads, Th and Tc (usually room temperature and liquid nitrogen), are converted into radiated power temperatures to deduce TR from Y. Only one of these methods is consistent with Tucker's quantum mixer theory and the constraints of Heisenberg's uncertainty principle. The paper also examines the minimum system noise achievable with single- and double-sideband receivers.
Thermal noise in optics constrains the precision of optical experiments, including Michelson interferometers, optical clocks, and optomechanical sensors. While high-power optical experiments such as gravitational-wave detectors are currently limited mainly by quantum noise, new experiments incorporating recent insights from quantum metrology are being developed that evade the quantum shot noise background. In particular, Michelson interferometers that use photon-counting readout will look for weak, high-frequency signals. Since shot noise is no longer the dominant noise source with these readout schemes, it is important to accurately model thermal noise to characterize signals and design more sensitive experiments. However, previous modeling uses approximations that are no longer valid in these frequency regimes. In the MHz band, the quasistatic approximation does not apply. We therefore develop more general models of substrate and coating mechanical (Brownian) noise, substrate and coating thermoelastic noise, and coating thermorefractive noise. We validate the models with comparisons to previous low-frequency modeling and high-frequency spectra from an experiment that has already taken data, the Holometer. We then apply the new models to GQuEST, an experiment under construction.