Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

A Superconducting Qubit Sensor for Shear-Coupled Dephasing

William Alexander Aldred

Published Nov 11, 2026• 1 citation
Publisher

Abstract

A superconducting qubit is an exquisitely sensitive detector of its own decoherence: anything in its environment that shifts its transition frequency shortens its coherence in a measurable way. This paper designs a qubit sensor that uses that sensitivity deliberately, reading shear-coupled environmental structure through echo dephasing. With an echo coherence time of 120 microseconds, a coupling of 2 pi times 8 MHz and 8000 measurement shots, the phase resolution is 0.0112 rad and the computed coupling sensitivity is 1.85e-06 per root hertz in fractional terms. The device is a laboratory sensor design for characterising shear-coupled noise in cryogenic environments. All figures are computed from the stated assumptions; no device has been fabricated.

DOI
10.5281/zenodo.24138602

Related papers

Suppression of photon shot noise dephasing in a tunable coupling superconducting qubit

Gengyan Zhang, Yanbing Liu, James J. Raftery +1 more

Abstract We demonstrate the suppression of photon shot noise dephasing in a superconducting qubit by eliminating its dispersive coupling to the readout cavity. This is achieved in a tunable coupling qubit, where the qubit frequency and coupling rate can be controlled independently. We observe that the coherence time approaches twice the relaxation time and becomes less sensitive to thermal photon noise when the dispersive coupling rate is tuned from several MHz to 22 kHz. This work provides a promising building block in circuit quantum electrodynamics that can hold high coherence and be integrated into larger systems.

arXiv:1603.01224•npj Quantum Information•Jan 12, 2017•148 citations

Methods to achieve near-millisecond energy relaxation and dephasing times for a superconducting transmon qubit

Mikko Tuokkola, Yoshiki Sunada, Heidi Kivijärvi +6 more

Abstract Superconducting qubits are one of the most promising physical systems for implementing quantum computers. However, executing quantum algorithms of practical computational advantage requires further improvements in the fidelities of qubit operations, which are currently limited by the energy relaxation and dephasing times of the qubits. Here, we report our measurement results of a high-coherence transmon qubit with energy relaxation and echo dephasing times surpassing those in the existing literature. We measure a qubit frequency of 2.9 GHz, an energy relaxation time T 1 with a median of 425 μs and a maximum of (666 ± 33)μs, and an echo dephasing time $${T}_{2}^{{{{\rm{echo}}}}}$$ T 2 echo with a median of 541 μs and a maximum of (1057 ± 138)μs. We report in detail our design, fabrication process, and measurement setup to facilitate the reproduction and wide adoption of high-coherence transmon qubits in the academia and industry.

arXiv:2407.18778•Nature Communications•Jul 8, 2025•98 citations

Read-out of superconducting qubits - a quantum measurement process

Lars Tornberg

In this work we consider measurements on quantum systems emphasizing\non read-out of superconducting qubits. The qubit is always coupled to an\nenvironment, containing a macroscopic number of degrees of freedom. This\nperturbs the qubit and destroys the phase coherence of the quantum state.\nOne tries to minimize this destructive effect by encoding the quantum information in quantum states which do not couple strongly to the dominant\nnoise sources. It is therefore necessary to design read-out methods that can\ndistinguish these states.\n\nWe focus primarily on the single Cooper-pair box (SCB) charge qubit, whose\nproperties are based on the Josephson effect and Coulumb blockade in superconducting electrical circuits. By encoding the information in the qubit\nenergy eigenstates, it is possible to protect it from the most dangerous decoherence source - charge fluctuations in the environment. We investigate\nthe measurement setup, where the SCB is coupled to a lumped element LCoscillator whose resonance frequency is orders of magnitude smaller than the qubit energy splitting. In this regime the SCB will act as an effective positive or negative capacitance, depending on the quantum state. This quantum capacitance then shifts the oscillator resonance frequency, which can be detected in a homodyne phase measurement.\n\nWe have found that reading out a charge qubit by measuring its quantum\ncapacitance in this manner is quantum limited, independently of the oscillator\nquality factor Q. Moreover, we have found that the low-Q oscillator\nis advantageous for the measurement in two ways: first, such an oscillator\nbetter protects the qubit from thermal dephasing, and, second, it allows to\nincrease the speed of the read-out, making it possible to distinguish the qubit states in a single shot measurement.

•Jan 1, 2007•0 citations

Resolution of Qubit Decoherence: Coherence Collapse as a Deterministic Phase Transition in Coupled Oscillator Networks

Nicolae Pascal

We propose that qubit decoherence in superconducting quantum computers is not random noise but a deterministic phase transition in a coupled oscillator network. Each qubit is modeled as a phase oscillator with natural frequency omega_i, coupled with strength K to its neighbors. Coherence is quantified by the Kuramoto order parameter r = |mean(exp(2 pi i theta))|. A critical coupling K_c = 2 sigma_omega / pi separates two regimes: below K_c, phases desynchronize and coherence collapses (r approaches 0, T2 ~ 100 microseconds); above K_c, phases lock and coherence is maintained (r approaches 1, T2 can exceed milliseconds). Current superconducting qubits operate at K/K_c ~ 0.5, deep in the decoherent regime. We show that phase-optimized coupling at K/K_c = 5 on the same hardware could increase T2 by an order of magnitude, potentially transforming quantum error correction overhead.

•Mar 15, 2026•0 citations

Coherence properties of the 0-πqubit

Peter Groszkowski, Agustín Di Paolo, Arne L. Grimsmo +4 more

Superconducting circuits rank among some of the most interesting architectures for the implementation of quantum information processing devices.The recently proposed 0-π qubit (Brooks et al 2013 Phys.Rev. A 87 52306) promises increased protection from spontaneous relaxation and dephasing.In this paper we present a detailed theoretical study of the coherence properties of the 0-π device, investigate relevant decoherence channels, and show estimates for achievable coherence times in multiple parameter regimes.In our analysis, we include disorder in circuit parameters, which results in the coupling of the qubit to a low-energy, spurious harmonic mode.We analyze the effects of such coupling on decoherence, in particular dephasing due to photon shot noise, and outline how such a noise channel can be mitigated by appropriate parameter choices.In the end we find that the 0-π qubit performs well and may become an attractive candidate for the implementation of the next-generation superconducting devices for uses in quantum computing and information.

arXiv:1708.02886•New Journal of Physics•Mar 19, 2018•110 citations

Phase coherent dynamics of a superconducting flux qubit with capacitive bias readout

Frank Deppe, M. Mariantoni, E. P. Menzel +7 more

We present a systematic study of the phase coherent dynamics of a superconducting three-Josephson-junction flux qubit. The qubit state is detected with the integrated-pulse method, which is a variant of the pulsed switching-dc-superconducting quantum interference device (SQUID) method. In this scheme, the dc SQUID bias current pulse is applied via a capacitor instead of a resistor, giving rise to a narrow bandpass instead of a pure low-pass filter configuration of the electromagnetic environment. Measuring one and the same qubit with both setups allows a direct comparison. With the capacitive method about four times faster switching pulses and an increased visibility are achieved. Furthermore, the deliberate engineering of the electromagnetic environment, which minimizes the noise due to the bias circuit, is facilitated. Right at the degeneracy point, the qubit coherence is limited by energy relaxation. We find two main noise contributions. White noise limits the energy relaxation and contributes to the dephasing far from the degeneracy point. $1∕f$ noise is the dominant source of dephasing in the direct vicinity of the optimal point. The influence of $1∕f$ noise is also supported by nonrandom beatings in the Ramsey and spin echo decay traces. Numeric simulations of a coupled qubit-oscillator system indicate that these beatings are due to the resonant interaction of the qubit with at least one pointlike fluctuator, coupled especially strongly to the qubit.

arXiv:0710.4455•Physical Review B•Dec 4, 2007•37 citations
A superconducting qubit is an exquisitely sensitive detector of its own decoherence: anything in its environment that shifts its transition frequency shortens its coherence in a measurable way. This paper designs a qubit sensor that uses that sensitivity deliberately, reading shear-coupled environmental structure through echo dephasing. With an echo coherence time of 120 microseconds, a coupling of 2 pi times 8 MHz and 8000 measurement shots, the phase resolution is 0.0112 rad and the computed coupling sensitivity is 1.85e-06 per root hertz in fractional terms. The device is a laboratory sensor design for characterising shear-coupled noise in cryogenic environments. All figures are computed from the stated assumptions; no device has been fabricated.
Abstract We demonstrate the suppression of photon shot noise dephasing in a superconducting qubit by eliminating its dispersive coupling to the readout cavity. This is achieved in a tunable coupling qubit, where the qubit frequency and coupling rate can be controlled independently. We observe that the coherence time approaches twice the relaxation time and becomes less sensitive to thermal photon noise when the dispersive coupling rate is tuned from several MHz to 22 kHz. This work provides a promising building block in circuit quantum electrodynamics that can hold high coherence and be integrated into larger systems.
Abstract Superconducting qubits are one of the most promising physical systems for implementing quantum computers. However, executing quantum algorithms of practical computational advantage requires further improvements in the fidelities of qubit operations, which are currently limited by the energy relaxation and dephasing times of the qubits. Here, we report our measurement results of a high-coherence transmon qubit with energy relaxation and echo dephasing times surpassing those in the existing literature. We measure a qubit frequency of 2.9 GHz, an energy relaxation time T 1 with a median of 425 μs and a maximum of (666 ± 33)μs, and an echo dephasing time T2echo{T}_{2}^{{{{\rm{echo}}}}}T2echo​ T 2 echo with a median of 541 μs and a maximum of (1057 ± 138)μs. We report in detail our design, fabrication process, and measurement setup to facilitate the reproduction and wide adoption of high-coherence transmon qubits in the academia and industry.
In this work we consider measurements on quantum systems emphasizing\non read-out of superconducting qubits. The qubit is always coupled to an\nenvironment, containing a macroscopic number of degrees of freedom. This\nperturbs the qubit and destroys the phase coherence of the quantum state.\nOne tries to minimize this destructive effect by encoding the quantum information in quantum states which do not couple strongly to the dominant\nnoise sources. It is therefore necessary to design read-out methods that can\ndistinguish these states.\n\nWe focus primarily on the single Cooper-pair box (SCB) charge qubit, whose\nproperties are based on the Josephson effect and Coulumb blockade in superconducting electrical circuits. By encoding the information in the qubit\nenergy eigenstates, it is possible to protect it from the most dangerous decoherence source - charge fluctuations in the environment. We investigate\nthe measurement setup, where the SCB is coupled to a lumped element LCoscillator whose resonance frequency is orders of magnitude smaller than the qubit energy splitting. In this regime the SCB will act as an effective positive or negative capacitance, depending on the quantum state. This quantum capacitance then shifts the oscillator resonance frequency, which can be detected in a homodyne phase measurement.\n\nWe have found that reading out a charge qubit by measuring its quantum\ncapacitance in this manner is quantum limited, independently of the oscillator\nquality factor Q. Moreover, we have found that the low-Q oscillator\nis advantageous for the measurement in two ways: first, such an oscillator\nbetter protects the qubit from thermal dephasing, and, second, it allows to\nincrease the speed of the read-out, making it possible to distinguish the qubit states in a single shot measurement.
We propose that qubit decoherence in superconducting quantum computers is not random noise but a deterministic phase transition in a coupled oscillator network. Each qubit is modeled as a phase oscillator with natural frequency omega_i, coupled with strength K to its neighbors. Coherence is quantified by the Kuramoto order parameter r = |mean(exp(2 pi i theta))|. A critical coupling K_c = 2 sigma_omega / pi separates two regimes: below K_c, phases desynchronize and coherence collapses (r approaches 0, T2 ~ 100 microseconds); above K_c, phases lock and coherence is maintained (r approaches 1, T2 can exceed milliseconds). Current superconducting qubits operate at K/K_c ~ 0.5, deep in the decoherent regime. We show that phase-optimized coupling at K/K_c = 5 on the same hardware could increase T2 by an order of magnitude, potentially transforming quantum error correction overhead.
Superconducting circuits rank among some of the most interesting architectures for the implementation of quantum information processing devices.The recently proposed 0-π qubit (Brooks et al 2013 Phys.Rev. A 87 52306) promises increased protection from spontaneous relaxation and dephasing.In this paper we present a detailed theoretical study of the coherence properties of the 0-π device, investigate relevant decoherence channels, and show estimates for achievable coherence times in multiple parameter regimes.In our analysis, we include disorder in circuit parameters, which results in the coupling of the qubit to a low-energy, spurious harmonic mode.We analyze the effects of such coupling on decoherence, in particular dephasing due to photon shot noise, and outline how such a noise channel can be mitigated by appropriate parameter choices.In the end we find that the 0-π qubit performs well and may become an attractive candidate for the implementation of the next-generation superconducting devices for uses in quantum computing and information.
We present a systematic study of the phase coherent dynamics of a superconducting three-Josephson-junction flux qubit. The qubit state is detected with the integrated-pulse method, which is a variant of the pulsed switching-dc-superconducting quantum interference device (SQUID) method. In this scheme, the dc SQUID bias current pulse is applied via a capacitor instead of a resistor, giving rise to a narrow bandpass instead of a pure low-pass filter configuration of the electromagnetic environment. Measuring one and the same qubit with both setups allows a direct comparison. With the capacitive method about four times faster switching pulses and an increased visibility are achieved. Furthermore, the deliberate engineering of the electromagnetic environment, which minimizes the noise due to the bias circuit, is facilitated. Right at the degeneracy point, the qubit coherence is limited by energy relaxation. We find two main noise contributions. White noise limits the energy relaxation and contributes to the dephasing far from the degeneracy point. 1∕f1∕f1∕f noise is the dominant source of dephasing in the direct vicinity of the optimal point. The influence of 1∕f1∕f1∕f noise is also supported by nonrandom beatings in the Ramsey and spin echo decay traces. Numeric simulations of a coupled qubit-oscillator system indicate that these beatings are due to the resonant interaction of the qubit with at least one pointlike fluctuator, coupled especially strongly to the qubit.