Solid-state quantum sensors based on nitrogen-vacancy (NV) centers in diamond offer room-temperature operation, chemical stability, and a wide range of operating environments, and their application to microwave (MW) measurements are anticipated. In this study, we propose a method for quantitative MW field measurements under continuous-wave driving, referred to as the "NV Candle," aimed at realizing a solid-state quantum MW standard. Building on the atomic candle concept developed in atomic vapor systems, this method employs phase modulation of MW and resonance with Rabi oscillations to extract the Rabi frequency in the frequency domain. Experiments using NV centers in diamond demonstrated that the MW magnetic field derived from the NV Candle signals exhibited linearity over a 20 dB dynamic range. This work presents a novel approach to realize a solid-state quantum MW standard with enhanced robustness and practical applicability.
Solid-state quantum sensors based on nitrogen-vacancy (NV) centers in diamond offer room-temperature operation, chemical stability, and a wide range of operating environments, and their application to microwave (MW) measurements are anticipated. In this study, we propose a method for quantitative MW field measurements under continuous-wave driving, referred to as the "NV Candle," aimed at realizing a solid-state quantum MW standard. Building on the atomic candle concept developed in atomic vapor systems, this method employs phase modulation of MW and resonance with Rabi oscillations to extract the Rabi frequency in the frequency domain. Experiments using NV centers in diamond demonstrated that the MW magnetic field derived from the NV Candle signals exhibited linearity over a 20 dB dynamic range. This work presents a novel approach to realize a solid-state quantum MW standard with enhanced robustness and practical applicability.
This thesis investigates the theoretical foundations, material properties, and experimental realization of quantum sensors based on the Nitrogen-Vacancy (NV) centers in diamond, a solid-state system that combines quantum coherence with room-temperature operability. The first chapter introduces the principles of quantum sensing, outlining the fundamental definitions, operating protocols, and physical processes underlying the quantum measurement paradigm. Emphasis is placed on the quantum sensing Hamiltonian and the distinction between various classes of quantum sensors. The second chapter focuses on diamond as a host material and on the NV center as a quantum defect. The electronic structure, optical transitions, and spin properties of the NV center are analyzed in detail. Several techniques of NV-based magnetometry are presented, including continuouswave and pulsed optically detected magnetic resonance (ODMR). The discussion also addresses coherence times (T1, T2, and T∗2 ) and methods of diamond synthesis together with NV-center generation through irradiation and annealing. Chapter three develops the physical theory describing the NV center. The Hamiltonian formalism includes spin-spin, hyperfine, and quadrupolar interactions, as well as couplings to external magnetic fields. The chapter further introduces the Bloch sphere representation, magnetic resonance phenomena, and models of lightmatter interaction, ranging from the semiclassical to the fully quantum Rabi framework. A seven-level rate-equation model is proposed to capture the spin dynamics and optical cycling processes of the NV center. The fourth chapter reports the experimental results. After describing materials and methods, several ODMR-based vector magnetometry experiments are presented, highlighting different spectral regimes and the dependence of resonance features on the external magnetic field geometry. Additional studies demonstrate temperature sensing and microwave-free magnetometry techniques for mapping magnetic field distributions. Sensitivity analysis and calibration procedures are also discussed.
Nitrogen-vacancy (NV) centers in diamond have been used as platforms for quantum information, magnetometry and imaging of microwave (MW) fields. The spatial distribution of the MW fields used to drive the electron spin of NV centers plays a key role for these applications. Here, we report a system for the control and characterization of MW magnetic fields used for the NV spin manipulation. The control of the MW field in the vicinity of a diamond surface is mediated by an exchangeable lumped resonator, coupled inductively to a MW planar ring antenna. The characterization of the MW fields in the near-field is performed by an FFT imaging of Rabi oscillations, by using an ensemble of NV centers. We have found that the Rabi frequency over a lumped resonator is enhanced 22 times compared to the Rabi frequency without the presence of the lumped resonator. Our system may find applications in quantum information and magnetometry where a precise and controlled spin manipulation is required, showing NV centers as good candidates for imaging MW fields and characterization of MW devices.
Nitrogen-vacancy (NV) centers in diamond as ideally individual spin quantum systems can be coherently manipulated by microwave fields. Compared to the traditional method using the IQ (In-phase/Quadrature) mixer with a local oscillator and intermediate-frequency (IF) signals, we report an effective and technically simple method to generate the required microwave field by frequency multiplication and realize coherent manipulation of the NV center’s electron spin. After frequency multiplication, the IF signal can be directly converted to the high-frequency microwave field with adjustable pulse width, frequency, phase, and amplitude. A series of spin dynamics applications such as Rabi oscillation, free induction decay, and spin-locking are executed, which verified its performance and feasibility. Frequency multiplication can overcome the problem of clock synchronization between the local oscillator and IF signal and greatly reduce the complexity of the experimental system. The method can be easily used to realize a more complex quantum control sequence such as dynamic decoupling and extended to a wide range of spin-based quantum information applications in the future.
Nitrogen vacancy centers in diamond have emerged as a solid-state analog to atomic systems with applications ranging from room temperature quantum computing to quantum sensing and metrology. To date, with notably few exceptions, all NV applications rely on coherent manipulation of spin states via resonant microwave driving. In this thesis the loop gap resonator (LGR) is presented as a mechanism for the delivery of resonantly enhanced and uniform microwave fields to large volume samples of nitrogen vacancy (NV) centers in diamond. Specifically, an S-band tunable LGR and its constituent excitation circuitry are designed and fabricated to enable directionally uniform, strong, homogeneous, and broadband microwave (MW) driving of an NV ensemble over an area larger than 32 mm2 . The LGR design, based on the anode block of a cavity magnetron, demonstrates an average field amplitude of 5 gauss at 42 dBm of input power, and achieves a peak-to-peak field uniformity of 89.5% over an area of 32 mm2 and 97% over an area of 11 mm2 . The broad bandwidth of the LGR is capable of addressing all resonances of an NV ensemble for bias magnetic Fields up to 14 gauss. Furthermore, with cavity ring-down-times in the single nanoseconds, the resonator is compatible with the pulsed MW techniques necessary for a wide range of NV-diamond applications.
Abstract We developed a compact, portable quantum sensor module for pulsed measurements using diamond nitrogen-vacancy (NV) centers, an excitation laser diode of 3 mW and a microwave source of 15 dBm. This module allowed the evaluation of ensemble diamond NV centers for measuring magnetic fields by continuous wave— optically detected magnetic resonance (ODMR), Rabi oscillation, pulsed ODMR, Ramsey measurement and spin-echo measurement. The sensitivity through pulsed measurements reached 40 nT/ Hz at 1 Hz, which achieved higher sensitivity by one order, especially at a frequency around 1 Hz compared with previously reported compact modules using diamond NV centers.
Microwave (MW) magnetometry utilizing nitrogen-vacancy (NV) centers in diamond offers a broad, tunable detection bandwidth enabled by the magnetic-field-dependent electron spin resonances (ESR) of the NV centers. In this work, we present and experimentally demonstrate two NV-based protocols for spectral analysis of amplitude-modulated (MW) signals. The first protocol employs the NV center as a bandpass filter and reconstructs frequency-domain information of MW signals by sweeping the MW carrier frequency. The second protocol achieves optical imaging of the MW spectrum using an NV-based quantum spectrum analyzer, wherein a magnetic field gradient spatially maps the ESR frequencies of the NV centers, enabling parallel detection of multiple spectral components over a wide instantaneous bandwidth. Both protocols show results that agree well with reference measurements from a classical spectrum analyzer. Our approaches extend the application of spin-based quantum sensors to the field of modern communications and can be adapted for other spin-based quantum sensors.