Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)

Mirrorless Laser as a Cavity-Pulling-Immune Active Optical Clock

Jia Zhang, Xun Gao, Xiaolei Guan, 韩梦媛 Han Mengyuan, Tiantian Shi, Jingbiao Chen

Published May 1, 2026• 0 citations
Publisher

Abstract

In this work, we demonstrate a continuous-wave 1470 nm mirrorless laser toward a cavity-pulling-immune active optical clock based on thermal cesium atoms. A frequency-stabilized 459 nm pump laser is used to excite Cs atoms from the$\mathbf{6} \mathbf{S}_{\mathbf{1} \boldsymbol{/} \mathbf{2}}$ground state to the$\mathbf{7 P}_{\mathbf{1} / \mathbf{2}}$state, after which the atoms spontaneously decay to the$\mathbf{7 \mathbf { S } _ { \mathbf { 1 } } / \mathbf { 2}}$state and establish a population inversion between the$\mathbf{7} \mathbf{S}_{\mathbf{1} \boldsymbol{/} \mathbf{2}}$and$\mathbf{6 P}_{\mathbf{3} / \mathbf{2}}$levels. As a result, coherent 1470 nm emission associated with the$\mathbf{7} \mathbf{S}_{\mathbf{1} \boldsymbol{/} \mathbf{2}} \boldsymbol{\rightarrow} \mathbf{6 P}_{\mathbf{3} \boldsymbol{/} \mathbf{2}}$atomic transition is generated through a traveling-wave amplification mirrorless laser mechanism without employing an optical cavity. The 459 nm pump laser is stabilized by modulation transfer spectroscopy to maintain efficient excitation and stable gain. The beat-note spectrum is fitted with a Lorentzian profile, yielding a linewidth of 278.3 kHz. Owing to the absence of cavity eigenmodes, the output frequency is intrinsically free from conventional cavity pulling. This mirrorless laser scheme may provide a new route for developing compact atomic-transition-referenced optical frequency sources and represents a promising configuration for future active optical clocks.

DOI
10.1109/ifcs68110.2026.11738369

Related papers

Lasing and suppressed cavity-pulling effect of Cesium active optical clock

Zhichao Xu, Wei Zhuang, Jingbiao Chen

We experimentally demonstrate the collective emission behavior and suppressed cavity-pulling effect of four-level active optical clock with Cesium atoms. Thermal Cesium atoms in a glass cell velocity selective pumped with a 455.5 nm laser operating at 6S$_{1/2}$ to 7P$_{3/2}$ transition are used as lasing medium. Population inverted Cesium atoms between 7S$_{1/2}$ and 6P$_{3/2}$ levels are optical weakly coupled by a pair cavity mirrors working at deep bad-cavity regime with a finesse of 4.3, and the ratio between cavity bandwidth and gain bandwidth is approximately 45. With increased 455.5 nm pumping laser intensity, the output power of cesium active optical clock at 1469.9 nm from 7S$_{1/2}$ level to 6P$_{3/2}$ level shows a threshold and reach a power of 13 $μ$W. Active optical clock would dramatically improve the optical clock stability since the lasing frequency does not follow the cavity length variation exactly, but in a form of suppressed cavity pulling effect. In this letter the cavity pulling effect is measured using a Fabry-Perot interferometer (FPI) to be reduced by a factor of 38.2 and 41.4 as the detuning between the 1469.9 nm cavity length of the Cs active optical clock and the Cs 1469.9 nm transition is set to be 140.8 MHz and 281.6 MHz respectively. The mechanism demonstrated here is of great significance for new generation optical clocks and can be applied to improve the stability of best optical clocks by at least two orders of magnitude.

arXiv:1404.6021•Apr 24, 2014•7 citations

Stabilizing 459 nm passive optical clock for pumping 1470 nm active optical clock

Haoyang Wu, Zhiqiang 智强 Wen 温, Chen Wang +4 more

Abstract Optical clocks with thermal atoms are characterized by compact size, simple structure, reduced weight, and low power consumption and have the potential for broad out-of-the-lab and commercial applications. Here, we demonstrate a 459 nm optical clock based on the 6S 1/2 –7P 1/2 transition in thermal 133 Cs atoms. Two methods, modulation transfer spectroscopy (MTS) and frequency modulation spectroscopy (FMS), are employed to stabilize the frequency of a 459 nm commercial laser to the atomic transition. The MTS-MTS and MTS-FMS beat-note measurements show short-term frequency stabilities of 3.7 × 10 − 13 / τ and 6.4 × 10 − 13 / τ , respectively, at the averaging time τ . The 459 nm passive optical clock further serves as the pump for an active 1470 nm optical clock based on the cavityless lasing. The resultant 1470 nm output power reaches over 10 μW and the pump-beam-induced light shift is estimated to be 2 π × 11 Hz with a fractional uncertainty of 2.4 × 10 −18 . These results demonstrate the feasibility of hybridizing passive and active optical clocks, providing a promising route toward compact multi-wavelength optical frequency standards.

Chinese Physics B•Aug 26, 2025•3 citations

Prospects for an Active Optical Clock Based on Cavityless Lasing

Deshui Yu, Jia Zhang, Shougang Zhang +1 more

Abstract Active optical clocks take advantage of the substantial suppression of cavity pulling in the bad‐cavity lasing regime and feature the simple structure and excellent portability. In the extreme case, where the cavity mirror reflection approaches zero and cannot support any quasi‐bound modes for light waves, conventional bad‐cavity lasers become the cavityless lasing and the cavity pulling vanishes. Consequently, the laser frequency is determined entirely by the atomic transition. This work is dedicated to theoretically explore the potential application of the cavityless lasing in active optical clocks. Without loss of generality, Cs atoms with well‐established quantum control techniques are employed as the gain medium that is pumped by a 459‐nm laser. The clock laser wavelength is 1470 nm. The simulation shows that the frequency stability of the clock laser with feasible physical quantities reaches at 1 s of averaging time, one order of magnitude better than the recently demonstrated compact passive optical clocks that are built upon a two‐photon transition in a hot Rb vapor and upon the modulation transfer spectroscopy of thermal Cs atoms. Such compact cavityless lasing‐based active optical clocks have the broad application prospect in satellite navigation and communications and promise an architecture for the integrated photonic metrology.

Advanced Quantum Technologies•Dec 31, 2023•9 citations

A dual-wavelength continuous-wave mirrorless laser in thermal rubidium vapor

Jiani Zhang, Lina Bai

Mirrorless lasers avoid cavity-pulling effects by generating stimulated emission directly from an atomic gain medium without an optical cavity. However, most superradiant or superfluorescent emissions are transient, limiting their use as steady atom-referenced optical sources. Here, we demonstrate a continuous-wave dual-wavelength mirrorless laser in thermal rubidium vapor. A frequency-stabilized 420 nm laser pumps the 5S1/2→6P3/2 transition and generates directional infrared lasing at 1323 and 1367 nm through the non-cascaded 6S1/2→5P1/2 and 6S1/2→5P3/2 transitions. The emissions exhibit threshold-like pump-power dependence and a near-fundamental transverse mode, supporting CW mirrorless laser in a traveling-wave atomic gain medium. Heterodyne detection gives a 1367 nm linewidth of 32.5 kHz, which is 38 times narrower than the natural linewidth. This work establishes a linewidth-narrowed, cavity-free, atom-referenced dual-wavelength laser platform for precision spectroscopy, optical frequency references, and quantum sensing.

Applied Physics Letters•Jul 13, 2026•0 citations

Lasing of cesium active optical clock with 459 nm laser pumping

Duo Pan, Zhichao Xu, Xiaobo Xue +2 more

We realize the lasing of cesium active optical clock with 459 nm laser pumping, which operates deep in the optical bad-cavity regime. The ratio between cavity bandwidth and gain bandwidth is 55.08 theoretically. With 459 nm laser pumping, the population inversion occurs between the cesium 7S1/2state and 6P3/2state, and the stimulated radiation between the two states is realized. The 1469.9 nm output signal of cesium active optical clock can reach a power of 8 μW. The output power also shows a threshold character with pumping laser power and can be influenced by the Cs cell temperature. This active optical clock has an advantage in stability over the conventional optical clocks, due to its suppression of cavity pulling effect, which is also demonstrated experimentally.

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)•May 1, 2014•18 citations

Measuring the Cavity-Pulling Coefficient of Active Optical Clock via Pump Laser Modulation

Jianxiang Miao, Jia Zhang, Tiantian Shi +1 more

The active optical clock (AOC) takes advantage of the narrowed linewidth and cavity pulling suppression of the bad cavity laser, making it a candidate for the next generation of optical clock. We propose a new experimental method to measure the cavity-pulling effect of a four-level AOC based on thermal cesium atoms. After modulating the frequency of the 459 nm pumping laser, atoms in different velocity groups are pumped to the 7P1/2energy level. Therefore, population inversion is achieved in separate velocity groups, and sidebands are created in the gain profile. By measuring the central frequency of the beat spectrum between the zeroth order AOC output and the sidebands, the cavity-pulling coefficient can be calculated. This method has the advantage of not requiring any additional optical frequency reference, and can be adopted in AOC systems other than those using thermal atoms. Furthermore, our proposed method for cavity-pulling measurement can serve as a basis for the characterization of AOCs.

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)•May 15, 2023•0 citations
In this work, we demonstrate a continuous-wave 1470 nm mirrorless laser toward a cavity-pulling-immune active optical clock based on thermal cesium atoms. A frequency-stabilized 459 nm pump laser is used to excite Cs atoms from the6S1/2\mathbf{6} \mathbf{S}_{\mathbf{1} \boldsymbol{/} \mathbf{2}}6S1/2​ground state to the7P1/2\mathbf{7 P}_{\mathbf{1} / \mathbf{2}}7P1/2​state, after which the atoms spontaneously decay to the7S1/2\mathbf{7 \mathbf { S } _ { \mathbf { 1 } } / \mathbf { 2}}7S1​/2state and establish a population inversion between the7S1/2\mathbf{7} \mathbf{S}_{\mathbf{1} \boldsymbol{/} \mathbf{2}}7S1/2​and6P3/2\mathbf{6 P}_{\mathbf{3} / \mathbf{2}}6P3/2​levels. As a result, coherent 1470 nm emission associated with the7S1/2→6P3/2\mathbf{7} \mathbf{S}_{\mathbf{1} \boldsymbol{/} \mathbf{2}} \boldsymbol{\rightarrow} \mathbf{6 P}_{\mathbf{3} \boldsymbol{/} \mathbf{2}}7S1/2​→6P3/2​atomic transition is generated through a traveling-wave amplification mirrorless laser mechanism without employing an optical cavity. The 459 nm pump laser is stabilized by modulation transfer spectroscopy to maintain efficient excitation and stable gain. The beat-note spectrum is fitted with a Lorentzian profile, yielding a linewidth of 278.3 kHz. Owing to the absence of cavity eigenmodes, the output frequency is intrinsically free from conventional cavity pulling. This mirrorless laser scheme may provide a new route for developing compact atomic-transition-referenced optical frequency sources and represents a promising configuration for future active optical clocks.
We experimentally demonstrate the collective emission behavior and suppressed cavity-pulling effect of four-level active optical clock with Cesium atoms. Thermal Cesium atoms in a glass cell velocity selective pumped with a 455.5 nm laser operating at 6S1/2_{1/2}1/2​ to 7P3/2_{3/2}3/2​ transition are used as lasing medium. Population inverted Cesium atoms between 7S1/2_{1/2}1/2​ and 6P3/2_{3/2}3/2​ levels are optical weakly coupled by a pair cavity mirrors working at deep bad-cavity regime with a finesse of 4.3, and the ratio between cavity bandwidth and gain bandwidth is approximately 45. With increased 455.5 nm pumping laser intensity, the output power of cesium active optical clock at 1469.9 nm from 7S1/2_{1/2}1/2​ level to 6P3/2_{3/2}3/2​ level shows a threshold and reach a power of 13 μμμW. Active optical clock would dramatically improve the optical clock stability since the lasing frequency does not follow the cavity length variation exactly, but in a form of suppressed cavity pulling effect. In this letter the cavity pulling effect is measured using a Fabry-Perot interferometer (FPI) to be reduced by a factor of 38.2 and 41.4 as the detuning between the 1469.9 nm cavity length of the Cs active optical clock and the Cs 1469.9 nm transition is set to be 140.8 MHz and 281.6 MHz respectively. The mechanism demonstrated here is of great significance for new generation optical clocks and can be applied to improve the stability of best optical clocks by at least two orders of magnitude.
Abstract Optical clocks with thermal atoms are characterized by compact size, simple structure, reduced weight, and low power consumption and have the potential for broad out-of-the-lab and commercial applications. Here, we demonstrate a 459 nm optical clock based on the 6S 1/2 –7P 1/2 transition in thermal 133 Cs atoms. Two methods, modulation transfer spectroscopy (MTS) and frequency modulation spectroscopy (FMS), are employed to stabilize the frequency of a 459 nm commercial laser to the atomic transition. The MTS-MTS and MTS-FMS beat-note measurements show short-term frequency stabilities of 3.7 × 10 − 13 / τ and 6.4 × 10 − 13 / τ , respectively, at the averaging time τ . The 459 nm passive optical clock further serves as the pump for an active 1470 nm optical clock based on the cavityless lasing. The resultant 1470 nm output power reaches over 10 μW and the pump-beam-induced light shift is estimated to be 2 π × 11 Hz with a fractional uncertainty of 2.4 × 10 −18 . These results demonstrate the feasibility of hybridizing passive and active optical clocks, providing a promising route toward compact multi-wavelength optical frequency standards.
Abstract Active optical clocks take advantage of the substantial suppression of cavity pulling in the bad‐cavity lasing regime and feature the simple structure and excellent portability. In the extreme case, where the cavity mirror reflection approaches zero and cannot support any quasi‐bound modes for light waves, conventional bad‐cavity lasers become the cavityless lasing and the cavity pulling vanishes. Consequently, the laser frequency is determined entirely by the atomic transition. This work is dedicated to theoretically explore the potential application of the cavityless lasing in active optical clocks. Without loss of generality, Cs atoms with well‐established quantum control techniques are employed as the gain medium that is pumped by a 459‐nm laser. The clock laser wavelength is 1470 nm. The simulation shows that the frequency stability of the clock laser with feasible physical quantities reaches at 1 s of averaging time, one order of magnitude better than the recently demonstrated compact passive optical clocks that are built upon a two‐photon transition in a hot Rb vapor and upon the modulation transfer spectroscopy of thermal Cs atoms. Such compact cavityless lasing‐based active optical clocks have the broad application prospect in satellite navigation and communications and promise an architecture for the integrated photonic metrology.
Mirrorless lasers avoid cavity-pulling effects by generating stimulated emission directly from an atomic gain medium without an optical cavity. However, most superradiant or superfluorescent emissions are transient, limiting their use as steady atom-referenced optical sources. Here, we demonstrate a continuous-wave dual-wavelength mirrorless laser in thermal rubidium vapor. A frequency-stabilized 420 nm laser pumps the 5S1/2→6P3/2 transition and generates directional infrared lasing at 1323 and 1367 nm through the non-cascaded 6S1/2→5P1/2 and 6S1/2→5P3/2 transitions. The emissions exhibit threshold-like pump-power dependence and a near-fundamental transverse mode, supporting CW mirrorless laser in a traveling-wave atomic gain medium. Heterodyne detection gives a 1367 nm linewidth of 32.5 kHz, which is 38 times narrower than the natural linewidth. This work establishes a linewidth-narrowed, cavity-free, atom-referenced dual-wavelength laser platform for precision spectroscopy, optical frequency references, and quantum sensing.
We realize the lasing of cesium active optical clock with 459 nm laser pumping, which operates deep in the optical bad-cavity regime. The ratio between cavity bandwidth and gain bandwidth is 55.08 theoretically. With 459 nm laser pumping, the population inversion occurs between the cesium 7S1/2state and 6P3/2state, and the stimulated radiation between the two states is realized. The 1469.9 nm output signal of cesium active optical clock can reach a power of 8 μW. The output power also shows a threshold character with pumping laser power and can be influenced by the Cs cell temperature. This active optical clock has an advantage in stability over the conventional optical clocks, due to its suppression of cavity pulling effect, which is also demonstrated experimentally.
The active optical clock (AOC) takes advantage of the narrowed linewidth and cavity pulling suppression of the bad cavity laser, making it a candidate for the next generation of optical clock. We propose a new experimental method to measure the cavity-pulling effect of a four-level AOC based on thermal cesium atoms. After modulating the frequency of the 459 nm pumping laser, atoms in different velocity groups are pumped to the 7P1/2energy level. Therefore, population inversion is achieved in separate velocity groups, and sidebands are created in the gain profile. By measuring the central frequency of the beat spectrum between the zeroth order AOC output and the sidebands, the cavity-pulling coefficient can be calculated. This method has the advantage of not requiring any additional optical frequency reference, and can be adopted in AOC systems other than those using thermal atoms. Furthermore, our proposed method for cavity-pulling measurement can serve as a basis for the characterization of AOCs.