IEEE Transactions on Applied Superconductivity
Inverse design of Optimal Impedance Matching Tapers for Superconducting Nanowire Single Photon Detectors
F. B. Baalbergen, M. J. A. de Dood
Abstract
We introduce an optimization method for broadband impedance tapers that transfer signals from superconducting nanowire single photon detectors (SNSPDs) with 2kω 3kω source impedance to standard amplifiers with 50ω input impedance. A figure of merit (FOM), defined as the total integrated power transfer over a specific frequency window, allows comparisons of different impedance taper designs in terms of the total signal transmission. Using this FOM we identify the optimal Klopfenstein taper parameters for impedance matching between SNSPDs and high-frequency electronics. Additional numerical optimization of the taper geometry provides small additional improvements in the FOM. This is most prominent for the shortest (10mm long) tapers, where the improvement in FOM is order 5%. The improvement in these short tapers, is due to a resonance effect that partially compensates for the reduced taper length. This effect becomes negligible for sufficiently long adiabatic tapers.