Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

A Field Theory of Superconducting Fluctuations and Circuit Dissipation: Inter-Site Saddles, Non-Markovian Dielectric Loss, and the cQED Quantum Floor

James Glenn-Anderson

Published Oct 6, 2026• 0 citations
Publisher

Abstract

This paper is the third in a series of long-form summaries, one for each volume of a three-volume monograph on the inter-site field theory of 1/f noise. It summarizes the third and concluding volume, A Field Theory of Superconducting Fluctuations and Circuit Dissipation (Self-published, KDP, ASIN B0HLMS97ZZ), and builds on the classical and quantum papers of the series (10.5281/zenodo.22942255 and 10.5281/zenodo.22981164). It is written to be cited. Energy relaxation, dielectric loss, critical-current noise and flux noise in superconducting circuits are usually treated as separate problems. The standard tunneling model assumes a flat distribution of two-level-system parameters but does not supply a microscopic generator for it. Here the isolated-defect picture is replaced by a continuous, fluctuating electrostatic manifold spanning the tunnel barrier and its interfaces. Morse topology identifies the double wells of the standard tunneling model as rank-1 saddles, and the vector central limit theorem gives a Gaussian density of states whose width is fixed in closed form by the structural correlation length and the barrier thickness. From this single construction the paper derives: critical-current noise with 1/A area scaling, and the dielectric loss tangent, as longitudinal and transverse projections of one field; transmon energy relaxation through capacitive participation ratios; a geometric cross-correlation between Josephson-energy and charging-energy fluctuations that suppresses pure dephasing; a millikelvin quantum floor from soft-phonon bremsstrahlung under non-cancellation phase agitation; SQUID flux noise from a coupled surface-spin manifold; Differential Josephson Spectroscopy (DJS), an operando probe of barrier height and disorder width. Eleven principal results are stated with their assumptions and numbered for citation, together with twelve testable predictions (P1–P12) and their failure conditions. Structural results depend on stated assumptions and not on fitted constants. Quantitative results, such as the roughly 31 μs Ramsey dephasing floor for canonical planar transmons, depend on material inputs and are presented as order-of-magnitude statements.

DOI
10.5281/zenodo.23190607

Related papers

A First-Principles Field Theory of Magnetic Flux Noise in Superconducting Quantum Interference Devices (SQUIDs) and Flux-Tunable Qubits: Inter-Site Surface-Spin Hamiltonians, Vector Central Limit Theorems, and the Millikelvin Quantum Floor

James Glenn-Anderson

Low-frequency magnetic flux noise remains a persistent performance bottleneck in dc Superconducting Quantum Interference Devices (SQUIDs) and flux-tunable superconducting qubits across dilution refrigerator base temperatures. Traditional models treat surface paramagnetic spins as independent, non-interacting fluctuators, failing to explain strong exchange interactions, sub-Kelvin temperature insensitivity, and the universal Clarke R/W perimeter scaling law. Here, we resolve these empirical anomalies from first principles by embedding surface spins into a continuous inter-site electrostatic and magnetic potential manifold. Applying the Lindeberg-Feller Vector Central Limit Theorem to random surface dipolar fields yields an emergent Gaussian Density of States (GDOS) for spin inversion barriers. Integrating this disordered manifold across the SQUID washer geometry via magnetostatic reciprocity reproduces the universal R/W scaling law and predicts an absolute spectral amplitude of approximately 1.4 to 1.7 micro-Phi-0 per square root of Hz at 100 mK. Furthermore, accounting for non-cancellation phase agitation within the open spin saddles proves that soft-magnon and phonon bremsstrahlung sustain an irreducible millikelvin quantum flux noise floor down to absolute zero. In order to bridge microscopic theory with practical engineering, the manuscript includes a complete, modular MATLAB simulation toolbox (compatible with MATLAB R2016a/b and later) that computes closed-form classical flux noise spectral densities, frequency sweeps, and absolute spectral amplitudes for device optimization.

•Oct 29, 2026•0 citations

Nonequilibrium quasiparticles in superconducting circuits: Energy relaxation and charge and flux noise

José Alberto Nava Aquino, Rogério de Sousa

The quasiparticle density observed in low-temperature superconducting circuits is several orders of magnitude larger than the value expected at thermal equilibrium. The tunneling of this excess of quasiparticles across Josephson junctions is recognized as one of the main loss and decoherence mechanisms in superconducting qubits. Here we present a unified impedance theory that accounts for quasiparticle energy loss in circuit regions both far from and near to (across) junctions. Our theory leverages the recent experimental demonstration that the excess quasiparticles are in quasiequilibrium [Connolly et al., Phys. Rev. Lett. 132, 217001 (2024)] and uses a generalized fluctuation-dissipation theorem to predict the amount of charge and flux noise generated by them. We compute the resulting energy relaxation time ${T}_{1}$ in transmon qubits with and without junction asymmetric gap engineering, and show that quasiparticles residing away from junctions can play a dominant role in the former case. They also may provide an upper limit for resonator quality factors if the density of amorphous two-level systems is reduced. In addition, we show that charge noise from quasiparticles leads to flux noise that is logarithmic in frequency, giving rise to a ``nearly white'' contribution that is comparable to the flux noise observed in flux qubits. This contrasts with amorphous two-level systems, whose associated flux noise is shown to be super-Ohmic. We discuss how this quasiparticle flux noise can limit ${T}_{2}^{\ensuremath{\ast}}$ coherence times in flux-tunable qubits. The final conclusion is that asymmetric gap engineering can greatly reduce noise and increase coherence times in superconducting qubits.

arXiv:2407.21177•Physical Review Applied•Sep 18, 2025•2 citations

Decoherence in Josephson-junction qubits due to critical-current fluctuations

Dale J. Van Harlingen, Timothy L. Robertson, B. L. T. Plourde +3 more

We compute the decoherence caused by $1∕f$ fluctuations at low frequency $f$ in the critical current ${I}_{0}$ of Josephson junctions incorporated into flux, phase, charge, and hybrid flux-charge superconducting quantum bits (qubits). The dephasing time ${\ensuremath{\tau}}_{\ensuremath{\phi}}$ scales as ${I}_{0}∕\ensuremath{\Omega}\ensuremath{\Lambda}{S}_{{I}_{0}}^{1∕2}(1\phantom{\rule{0.3em}{0ex}}\mathrm{Hz})$, where $\ensuremath{\Omega}∕2\ensuremath{\pi}$ is the energy-level splitting frequency, ${S}_{{I}_{0}}(1\phantom{\rule{0.3em}{0ex}}\mathrm{Hz})$ is the spectral density of the critical-current noise at $1\phantom{\rule{0.3em}{0ex}}\mathrm{Hz}$, and $\ensuremath{\Lambda}\ensuremath{\equiv}\ensuremath{\mid}{I}_{0}d\ensuremath{\Omega}∕\ensuremath{\Omega}d{I}_{0}\ensuremath{\mid}$ is a parameter computed for given parameters for each type of qubit that specifies the sensitivity of the level splitting to critical-current fluctuations. Computer simulations show that the envelope of the coherent oscillations of any qubit after time $t$ scales as $\mathrm{exp}(\ensuremath{-}{t}^{2}∕2{\ensuremath{\tau}}_{\ensuremath{\phi}}^{2})$ when the dephasing due to critical-current noise dominates the dephasing from all sources of dissipation. We compile published results for fluctuations in the critical current of Josephson tunnel junctions fabricated with different technologies and a wide range in ${I}_{0}$ and area $\mathcal{A}$, and show that their values of ${S}_{{I}_{0}}(1\phantom{\rule{0.3em}{0ex}}\mathrm{Hz})$ scale to within a factor of 3 of $[144{({I}_{0}∕\ensuremath{\mu}\mathrm{A})}^{2}∕(\mathcal{A}∕\ensuremath{\mu}{\mathrm{m}}^{2})]{(\mathrm{pA})}^{2}∕\mathrm{Hz}$ at $4.2\phantom{\rule{0.3em}{0ex}}\mathrm{K}$. We empirically extrapolate ${S}_{{I}_{0}}^{1∕2}(1\phantom{\rule{0.3em}{0ex}}\mathrm{Hz})$ to lower temperatures using a scaling $T(\mathrm{K})∕4.2$. Using this result, we find that the predicted values of ${\ensuremath{\tau}}_{\ensuremath{\phi}}$ at $100\phantom{\rule{0.3em}{0ex}}\mathrm{mK}$ range from $0.8\phantom{\rule{0.5em}{0ex}}\text{to}\phantom{\rule{0.5em}{0ex}}12\phantom{\rule{0.3em}{0ex}}\ensuremath{\mu}\mathrm{s}$, and are usually substantially longer than values measured experimentally at lower temperatures.

arXiv:cond-mat/0404307•Physical Review B•Aug 30, 2004•171 citations

Magnetic flux noise in SQUIDs and qubits

Steven M. Anton

For over three decades, the presence of magnetic flux noise with a power spectral density scaling roughly as $S_Phi(f) propto 1/f^alpha$, where $alpha lesssim 1$, has been known to limit the low-frequency performance of dc superconducting quantum interference devices (SQUIDs). In recent years, experiments indicate that this same noise persists to frequencies up to 1~GHz and is a dominant source of dephasing in flux-sensitive superconducting quantum bits (qubits). Thus, the reduction of flux noise presents a major hurdle towards the successful realization of scalable quantum computers that are based on flux-based qubits. In this thesis, we present experimental measurements, theoretical analyses, and numerical simulations that support a more detailed understanding of both the microscopic and macroscopic properties of flux noise.Our experimental work begins with flux noise measurements of a large number of SQUIDs in the temperature range from 0.1~K to 4~K. We report on measurements of ten SQUIDs with systematically varied geometries and show that $alpha$ increases as the temperature is lowered; in so doing, each spectrum pivots about a nearly constant frequency. The mean square flux noise, inferred by integrating the power spectra, grows rapidly with temperature and at a given temperature is approximately independent of the outer dimension of a given SQUID washer. We show that these results are incompatible with a model based on the random reversal of independent, spins that are located at the surface of the SQUID washer.In the course of our flux noise measurements, we became aware of a spurious contribution to low-frequency critical current noise in Josephson junctions---normally attributed to charge trapping in the barrier---arising from temperature instabilities inherent in cryogenic systems. These temperature fluctuations modify the critical current via its temperature dependence. By computing cross-correlations between measured temperature and critical current noise in Al-AlOx-Al junctions, we show that, despite excellent temperature stability, temperature fluctuations induce observable critical current fluctuations. Particularly, because $1/f$ critical current noise has decreased with improved fabrication techniques in recent years, it is important to understand and eliminate this additional noise source.Next, we introduce a numerical method of calculating the mean square flux noise $Phisq$ from independently fluctuating spins on the surface of thin-film loops of arbitrary geometry. By reciprocity, $Phisq$ is proportional to $langleBbf(rbf)^2rangle$, where $Bbf(rbf)$ is the magnetic field generated by a circulating current around the loop and $rbf$ varies over the loop surface. By discretizing the loop nonuniformly, we efficiently and accurately compute the current distribution and resulting magnetic field, which may vary rapidly across the loop. We use this method to compute $Phisq$ in a number of scenarios in which we systematically vary physical parameters of the loop. We compare our simulations to an earlier analytic result predicting that $Phisq propto R/W$ in the limit where the loop radius $R$ is much greater than the linewidth $W$. We further show that the previously neglected contribution of edge spins to $Phisq$ is significant---even dominant---in narrow-linewidth loops.To calculate theoretical dephasing rates in qubits, we consider flux noise with a spectral density $S_Phi(f) = A^2/(f/1~hbox{Hz})^alpha$, where $A$ is of the order of 1~$muPhi_0 , hbox{Hz}^{-1/2}$ and $0.6 leq alpha leq 1.2$; $Phi_{0}$ is the flux quantum. For a qubit with an energy level splitting linearly coupled to the applied flux, our calculations of the dependence of the pure dephasing time $tau_phi$ of Ramsey and echo pulse sequences on $alpha$ for fixed $A$ show that $tau_phi$ decreases rapidly as $alpha$ is reduced. We find that $tau_phi$ is relatively insensitive to the noise bandwidth, $f_1 leq f leq f_2$, for all $alpha$ provided the ultraviolet cutoff frequency $f_2 > 1/tau_phi$. We calculate the ratio $tau_{phi,E} / tau_{phi,R}$ of the echo ($E$) and Ramsey ($R$) sequences, and the dependence of the decay function on $alpha$ and $f_2$. We investigate the case in which $S_Phi(f_0)$ is fixed at the ``pivot frequency'' $f_0 neq 1$~Hz while $alpha$ is varied, and find that the choice of $f_0$ can greatly influence the sensitivity of $tau_{phi,E}$ and $tau_{phi,R}$ to the value of $alpha$.Finally, we conclude with a brief review of our principal results and conclusions. We also comment on promising avenues of future research.

•Jan 1, 2013•0 citations

Superinductance and fluctuating two-level systems: Loss and noise in disordered and non-disordered superconducting quantum devices

David Niepce

In this thesis, we first demonstrate that a disordered superconductor with high kinetic inductance can realise a microwave low-loss, non-dissipative circuit element with impedance greater than the quantum resistance. This element, known as a superinductor, can suppress the fluctuations of charge in a quantum circuit.For this purpose, we fabricated and characterised 20 nm thick, 40 nm wide niobium-nitride nanowires and determined the impedance to 6.795 kΩ. We demonstrate internal quality factors Qi = 2.5e4 in nanowire resonators at single photon excitation, which is significantly higher than values reported in devices with similar materials and geometries. Moreover, we show that the dominant dissipation in our nanowires is not an intrinsic property of the disordered films, but can instead be fully understood within the framework of two-level systems.To further characterise these losses, we then explore the geometrical scaling, toward nanowire dimensions, of dielectric losses in superconducting microwave resonators fabricated with the same techniques and from the same NbN thin-film as the nanowire superinductors. For this purpose, we perform an experimental and numerical study of dielectric loss at low temperatures. Using 3D finite-element simulation of the Maxwell--London equations, we compute the geometric filling factors of the lossy regions in our resonator structures and fit the experimental data to determine the intrinsic loss tangents of its interfaces and dielectrics. Finally, we study the effect of two-level systems on the performance of various superconducting quantum circuits. For this purpose, we measure coherence-time fluctuations in qubits and frequency fluctuations in resonators. In all devices, through statistical analysis, we identify the signature of individual Lorentzian fluctuators in the noise. We find that fluctuations in qubit relaxation are local to the qubit and are caused by instabilities of near-resonant two-level-systems. Furthermore, when examining the low-frequency noise of three different types of superconducting resonator - one NbN nanowire, one Al coplanar waveguide, and one Al 3D cavity - we observe a similar power-law dependence of the Lorentzian switching time and amplitude on the circulating power in the resonators, suggesting a common noise mechanism in the three different types of devices.

•Jan 1, 2020•2 citations

From Macroscopic Quantum Tunneling to Circuit QED: Coherence and Dissipation in 3D Transmon Qubits

Gustavo Moreto, Diego Molina, Saulo Gabriel Pereira Nascimento Alberton +9 more

Abstract Superconducting quantum circuits are a leading platform for quantum-information processing, but their development requires expertise spanning device design, microfabrication, cryogenic operation, microwave control, and quantum characterization. In this work, we report the realization of a flux-tunable superconducting transmon platform and present an integrated workflow encompassing design, fabrication, measurement, and numerical modeling. The device consists of an $$Al/AlO_x/Al$$ transmon coupled to a three-dimensional microwave cavity operating in the circuit quantum electrodynamics (cQED) dispersive regime. Two-tone spectroscopy reveals a fundamental transition frequency of $$\omega _{01}=5.0122~\textrm{GHz}$$ and an anharmonicity of $$\alpha /2\pi =-202.4~\textrm{MHz}$$ , corresponding to $$E_J/E_C \approx 82.9$$ . Flux spectroscopy yields a cavity-qubit coupling strength of $$g/2\pi = 260~\textrm{MHz}$$ , while the cavity linewidth gives a loaded quality factor of $$Q_L=6127$$ and a Purcell limit of $$T_1^{\textrm{Purcell}}\approx 82~\mu \textrm{s}$$ . Time-domain measurements yield coherence times of $$T_1 = 17.4~\mu \textrm{s}$$ and $$T_2^* = 5.8~\mu \textrm{s}$$ . To investigate coherence and dissipation in the device, the experimental observations are analyzed within a Lindblad master-equation framework describing cavity photon loss and thermal excitation, qubit energy relaxation, and pure dephasing processes. Using a set of experimentally extracted parameters, the model reproduces the measured spectroscopic and time-domain observables, providing a quantitative description of the open-system dynamics of the transmon-cavity platform. The analysis shows that the measured coherence is primarily limited by pure dephasing and energy-relaxation processes, whereas thermal excitation plays a minor role under the experimental conditions. Inspired by the broader framework of quantum dissipation in macroscopic quantum systems pioneered by Caldeira and collaborators, this approach enables a quantitative analysis of relaxation and dephasing processes in superconducting quantum circuits. Beyond the characterization of a single device, the present work demonstrates the establishment of the expertise, infrastructure, and experimental workflow required for the design, fabrication, measurement, and modeling of superconducting quantum circuits, contributing to the development of quantum technologies in Brazil and related applications.

Brazilian Journal of Physics•Oct 23, 2026•1 citation
This paper is the third in a series of long-form summaries, one for each volume of a three-volume monograph on the inter-site field theory of 1/f noise. It summarizes the third and concluding volume, A Field Theory of Superconducting Fluctuations and Circuit Dissipation (Self-published, KDP, ASIN B0HLMS97ZZ), and builds on the classical and quantum papers of the series (10.5281/zenodo.22942255 and 10.5281/zenodo.22981164). It is written to be cited. Energy relaxation, dielectric loss, critical-current noise and flux noise in superconducting circuits are usually treated as separate problems. The standard tunneling model assumes a flat distribution of two-level-system parameters but does not supply a microscopic generator for it. Here the isolated-defect picture is replaced by a continuous, fluctuating electrostatic manifold spanning the tunnel barrier and its interfaces. Morse topology identifies the double wells of the standard tunneling model as rank-1 saddles, and the vector central limit theorem gives a Gaussian density of states whose width is fixed in closed form by the structural correlation length and the barrier thickness. From this single construction the paper derives: critical-current noise with 1/A area scaling, and the dielectric loss tangent, as longitudinal and transverse projections of one field; transmon energy relaxation through capacitive participation ratios; a geometric cross-correlation between Josephson-energy and charging-energy fluctuations that suppresses pure dephasing; a millikelvin quantum floor from soft-phonon bremsstrahlung under non-cancellation phase agitation; SQUID flux noise from a coupled surface-spin manifold; Differential Josephson Spectroscopy (DJS), an operando probe of barrier height and disorder width. Eleven principal results are stated with their assumptions and numbered for citation, together with twelve testable predictions (P1–P12) and their failure conditions. Structural results depend on stated assumptions and not on fitted constants. Quantitative results, such as the roughly 31 μs Ramsey dephasing floor for canonical planar transmons, depend on material inputs and are presented as order-of-magnitude statements.
Low-frequency magnetic flux noise remains a persistent performance bottleneck in dc Superconducting Quantum Interference Devices (SQUIDs) and flux-tunable superconducting qubits across dilution refrigerator base temperatures. Traditional models treat surface paramagnetic spins as independent, non-interacting fluctuators, failing to explain strong exchange interactions, sub-Kelvin temperature insensitivity, and the universal Clarke R/W perimeter scaling law. Here, we resolve these empirical anomalies from first principles by embedding surface spins into a continuous inter-site electrostatic and magnetic potential manifold. Applying the Lindeberg-Feller Vector Central Limit Theorem to random surface dipolar fields yields an emergent Gaussian Density of States (GDOS) for spin inversion barriers. Integrating this disordered manifold across the SQUID washer geometry via magnetostatic reciprocity reproduces the universal R/W scaling law and predicts an absolute spectral amplitude of approximately 1.4 to 1.7 micro-Phi-0 per square root of Hz at 100 mK. Furthermore, accounting for non-cancellation phase agitation within the open spin saddles proves that soft-magnon and phonon bremsstrahlung sustain an irreducible millikelvin quantum flux noise floor down to absolute zero. In order to bridge microscopic theory with practical engineering, the manuscript includes a complete, modular MATLAB simulation toolbox (compatible with MATLAB R2016a/b and later) that computes closed-form classical flux noise spectral densities, frequency sweeps, and absolute spectral amplitudes for device optimization.
The quasiparticle density observed in low-temperature superconducting circuits is several orders of magnitude larger than the value expected at thermal equilibrium. The tunneling of this excess of quasiparticles across Josephson junctions is recognized as one of the main loss and decoherence mechanisms in superconducting qubits. Here we present a unified impedance theory that accounts for quasiparticle energy loss in circuit regions both far from and near to (across) junctions. Our theory leverages the recent experimental demonstration that the excess quasiparticles are in quasiequilibrium [Connolly et al., Phys. Rev. Lett. 132, 217001 (2024)] and uses a generalized fluctuation-dissipation theorem to predict the amount of charge and flux noise generated by them. We compute the resulting energy relaxation time T1{T}_{1}T1​ in transmon qubits with and without junction asymmetric gap engineering, and show that quasiparticles residing away from junctions can play a dominant role in the former case. They also may provide an upper limit for resonator quality factors if the density of amorphous two-level systems is reduced. In addition, we show that charge noise from quasiparticles leads to flux noise that is logarithmic in frequency, giving rise to a ``nearly white'' contribution that is comparable to the flux noise observed in flux qubits. This contrasts with amorphous two-level systems, whose associated flux noise is shown to be super-Ohmic. We discuss how this quasiparticle flux noise can limit ${T}_{2}^{\ensuremath{\ast}}$ coherence times in flux-tunable qubits. The final conclusion is that asymmetric gap engineering can greatly reduce noise and increase coherence times in superconducting qubits.
We compute the decoherence caused by 1∕f1∕f1∕f fluctuations at low frequency fff in the critical current I0{I}_{0}I0​ of Josephson junctions incorporated into flux, phase, charge, and hybrid flux-charge superconducting quantum bits (qubits). The dephasing time ${\ensuremath{\tau}}_{\ensuremath{\phi}}$ scales as ${I}_{0}∕\ensuremath{\Omega}\ensuremath{\Lambda}{S}_{{I}_{0}}^{1∕2}(1\phantom{\rule{0.3em}{0ex}}\mathrm{Hz})$, where $\ensuremath{\Omega}∕2\ensuremath{\pi}$ is the energy-level splitting frequency, SI0(1Hz){S}_{{I}_{0}}(1\phantom{\rule{0.3em}{0ex}}\mathrm{Hz})SI0​​(1Hz) is the spectral density of the critical-current noise at 1Hz1\phantom{\rule{0.3em}{0ex}}\mathrm{Hz}1Hz, and $\ensuremath{\Lambda}\ensuremath{\equiv}\ensuremath{\mid}{I}_{0}d\ensuremath{\Omega}∕\ensuremath{\Omega}d{I}_{0}\ensuremath{\mid}$ is a parameter computed for given parameters for each type of qubit that specifies the sensitivity of the level splitting to critical-current fluctuations. Computer simulations show that the envelope of the coherent oscillations of any qubit after time ttt scales as $\mathrm{exp}(\ensuremath{-}{t}^{2}∕2{\ensuremath{\tau}}_{\ensuremath{\phi}}^{2})$ when the dephasing due to critical-current noise dominates the dephasing from all sources of dissipation. We compile published results for fluctuations in the critical current of Josephson tunnel junctions fabricated with different technologies and a wide range in I0{I}_{0}I0​ and area A\mathcal{A}A, and show that their values of SI0(1Hz){S}_{{I}_{0}}(1\phantom{\rule{0.3em}{0ex}}\mathrm{Hz})SI0​​(1Hz) scale to within a factor of 3 of $[144{({I}_{0}∕\ensuremath{\mu}\mathrm{A})}^{2}∕(\mathcal{A}∕\ensuremath{\mu}{\mathrm{m}}^{2})]{(\mathrm{pA})}^{2}∕\mathrm{Hz}$ at 4.2K4.2\phantom{\rule{0.3em}{0ex}}\mathrm{K}4.2K. We empirically extrapolate SI01∕2(1Hz){S}_{{I}_{0}}^{1∕2}(1\phantom{\rule{0.3em}{0ex}}\mathrm{Hz})SI0​1∕2​(1Hz) to lower temperatures using a scaling T(K)∕4.2T(\mathrm{K})∕4.2T(K)∕4.2. Using this result, we find that the predicted values of ${\ensuremath{\tau}}_{\ensuremath{\phi}}$ at 100mK100\phantom{\rule{0.3em}{0ex}}\mathrm{mK}100mK range from $0.8\phantom{\rule{0.5em}{0ex}}\text{to}\phantom{\rule{0.5em}{0ex}}12\phantom{\rule{0.3em}{0ex}}\ensuremath{\mu}\mathrm{s}$, and are usually substantially longer than values measured experimentally at lower temperatures.
For over three decades, the presence of magnetic flux noise with a power spectral density scaling roughly as SPhi(f)propto1/falphaS_Phi(f) propto 1/f^alphaSP​hi(f)propto1/falpha, where alphalesssim1alpha lesssim 1alphalesssim1, has been known to limit the low-frequency performance of dc superconducting quantum interference devices (SQUIDs). In recent years, experiments indicate that this same noise persists to frequencies up to 1~GHz and is a dominant source of dephasing in flux-sensitive superconducting quantum bits (qubits). Thus, the reduction of flux noise presents a major hurdle towards the successful realization of scalable quantum computers that are based on flux-based qubits. In this thesis, we present experimental measurements, theoretical analyses, and numerical simulations that support a more detailed understanding of both the microscopic and macroscopic properties of flux noise.Our experimental work begins with flux noise measurements of a large number of SQUIDs in the temperature range from 0.1~K to 4~K. We report on measurements of ten SQUIDs with systematically varied geometries and show that alphaalphaalpha increases as the temperature is lowered; in so doing, each spectrum pivots about a nearly constant frequency. The mean square flux noise, inferred by integrating the power spectra, grows rapidly with temperature and at a given temperature is approximately independent of the outer dimension of a given SQUID washer. We show that these results are incompatible with a model based on the random reversal of independent, spins that are located at the surface of the SQUID washer.In the course of our flux noise measurements, we became aware of a spurious contribution to low-frequency critical current noise in Josephson junctions---normally attributed to charge trapping in the barrier---arising from temperature instabilities inherent in cryogenic systems. These temperature fluctuations modify the critical current via its temperature dependence. By computing cross-correlations between measured temperature and critical current noise in Al-AlOx-Al junctions, we show that, despite excellent temperature stability, temperature fluctuations induce observable critical current fluctuations. Particularly, because 1/f1/f1/f critical current noise has decreased with improved fabrication techniques in recent years, it is important to understand and eliminate this additional noise source.Next, we introduce a numerical method of calculating the mean square flux noise PhisqPhisqPhisq from independently fluctuating spins on the surface of thin-film loops of arbitrary geometry. By reciprocity, PhisqPhisqPhisq is proportional to langleBbf(rbf)2ranglelangleBbf(rbf)^2ranglelangleBbf(rbf)2rangle, where Bbf(rbf)Bbf(rbf)Bbf(rbf) is the magnetic field generated by a circulating current around the loop and rbfrbfrbf varies over the loop surface. By discretizing the loop nonuniformly, we efficiently and accurately compute the current distribution and resulting magnetic field, which may vary rapidly across the loop. We use this method to compute PhisqPhisqPhisq in a number of scenarios in which we systematically vary physical parameters of the loop. We compare our simulations to an earlier analytic result predicting that PhisqproptoR/WPhisq propto R/WPhisqproptoR/W in the limit where the loop radius RRR is much greater than the linewidth WWW. We further show that the previously neglected contribution of edge spins to PhisqPhisqPhisq is significant---even dominant---in narrow-linewidth loops.To calculate theoretical dephasing rates in qubits, we consider flux noise with a spectral density SPhi(f)=A2/(f/1 hboxHz)alphaS_Phi(f) = A^2/(f/1~hbox{Hz})^alphaSP​hi(f)=A2/(f/1 hboxHz)alpha, where AAA is of the order of 1~muPhi0,hboxHz−1/2muPhi_0 , hbox{Hz}^{-1/2}muPhi0​,hboxHz−1/2 and 0.6leqalphaleq1.20.6 leq alpha leq 1.20.6leqalphaleq1.2; Phi0Phi_{0}Phi0​ is the flux quantum. For a qubit with an energy level splitting linearly coupled to the applied flux, our calculations of the dependence of the pure dephasing time tauphitau_phitaup​hi of Ramsey and echo pulse sequences on alphaalphaalpha for fixed AAA show that tauphitau_phitaup​hi decreases rapidly as alphaalphaalpha is reduced. We find that tauphitau_phitaup​hi is relatively insensitive to the noise bandwidth, f1leqfleqf2f_1 leq f leq f_2f1​leqfleqf2​, for all alphaalphaalpha provided the ultraviolet cutoff frequency f2>1/tauphif_2 > 1/tau_phif2​>1/taup​hi. We calculate the ratio tauphi,E/tauphi,Rtau_{phi,E} / tau_{phi,R}tauphi,E​/tauphi,R​ of the echo (EEE) and Ramsey (RRR) sequences, and the dependence of the decay function on alphaalphaalpha and f2f_2f2​. We investigate the case in which SPhi(f0)S_Phi(f_0)SP​hi(f0​) is fixed at the ``pivot frequency'' f0neq1f_0 neq 1f0​neq1~Hz while alphaalphaalpha is varied, and find that the choice of f0f_0f0​ can greatly influence the sensitivity of tauphi,Etau_{phi,E}tauphi,E​ and tauphi,Rtau_{phi,R}tauphi,R​ to the value of alphaalphaalpha.Finally, we conclude with a brief review of our principal results and conclusions. We also comment on promising avenues of future research.
In this thesis, we first demonstrate that a disordered superconductor with high kinetic inductance can realise a microwave low-loss, non-dissipative circuit element with impedance greater than the quantum resistance. This element, known as a superinductor, can suppress the fluctuations of charge in a quantum circuit.For this purpose, we fabricated and characterised 20 nm thick, 40 nm wide niobium-nitride nanowires and determined the impedance to 6.795 kΩ. We demonstrate internal quality factors Qi = 2.5e4 in nanowire resonators at single photon excitation, which is significantly higher than values reported in devices with similar materials and geometries. Moreover, we show that the dominant dissipation in our nanowires is not an intrinsic property of the disordered films, but can instead be fully understood within the framework of two-level systems.To further characterise these losses, we then explore the geometrical scaling, toward nanowire dimensions, of dielectric losses in superconducting microwave resonators fabricated with the same techniques and from the same NbN thin-film as the nanowire superinductors. For this purpose, we perform an experimental and numerical study of dielectric loss at low temperatures. Using 3D finite-element simulation of the Maxwell--London equations, we compute the geometric filling factors of the lossy regions in our resonator structures and fit the experimental data to determine the intrinsic loss tangents of its interfaces and dielectrics. Finally, we study the effect of two-level systems on the performance of various superconducting quantum circuits. For this purpose, we measure coherence-time fluctuations in qubits and frequency fluctuations in resonators. In all devices, through statistical analysis, we identify the signature of individual Lorentzian fluctuators in the noise. We find that fluctuations in qubit relaxation are local to the qubit and are caused by instabilities of near-resonant two-level-systems. Furthermore, when examining the low-frequency noise of three different types of superconducting resonator - one NbN nanowire, one Al coplanar waveguide, and one Al 3D cavity - we observe a similar power-law dependence of the Lorentzian switching time and amplitude on the circulating power in the resonators, suggesting a common noise mechanism in the three different types of devices.
Abstract Superconducting quantum circuits are a leading platform for quantum-information processing, but their development requires expertise spanning device design, microfabrication, cryogenic operation, microwave control, and quantum characterization. In this work, we report the realization of a flux-tunable superconducting transmon platform and present an integrated workflow encompassing design, fabrication, measurement, and numerical modeling. The device consists of an Al/AlOx/AlAl/AlO_x/AlAl/AlOx​/Al transmon coupled to a three-dimensional microwave cavity operating in the circuit quantum electrodynamics (cQED) dispersive regime. Two-tone spectroscopy reveals a fundamental transition frequency of ω01=5.0122 GHz\omega _{01}=5.0122~\textrm{GHz}ω01​=5.0122 GHz and an anharmonicity of α/2π=−202.4 MHz\alpha /2\pi =-202.4~\textrm{MHz}α/2π=−202.4 MHz , corresponding to EJ/EC≈82.9E_J/E_C \approx 82.9EJ​/EC​≈82.9 . Flux spectroscopy yields a cavity-qubit coupling strength of g/2π=260 MHzg/2\pi = 260~\textrm{MHz}g/2π=260 MHz , while the cavity linewidth gives a loaded quality factor of QL=6127Q_L=6127QL​=6127 and a Purcell limit of T1Purcell≈82 μsT_1^{\textrm{Purcell}}\approx 82~\mu \textrm{s}T1Purcell​≈82 μs . Time-domain measurements yield coherence times of T1=17.4 μsT_1 = 17.4~\mu \textrm{s}T1​=17.4 μs and T2∗=5.8 μsT_2^* = 5.8~\mu \textrm{s}T2∗​=5.8 μs . To investigate coherence and dissipation in the device, the experimental observations are analyzed within a Lindblad master-equation framework describing cavity photon loss and thermal excitation, qubit energy relaxation, and pure dephasing processes. Using a set of experimentally extracted parameters, the model reproduces the measured spectroscopic and time-domain observables, providing a quantitative description of the open-system dynamics of the transmon-cavity platform. The analysis shows that the measured coherence is primarily limited by pure dephasing and energy-relaxation processes, whereas thermal excitation plays a minor role under the experimental conditions. Inspired by the broader framework of quantum dissipation in macroscopic quantum systems pioneered by Caldeira and collaborators, this approach enables a quantitative analysis of relaxation and dephasing processes in superconducting quantum circuits. Beyond the characterization of a single device, the present work demonstrates the establishment of the expertise, infrastructure, and experimental workflow required for the design, fabrication, measurement, and modeling of superconducting quantum circuits, contributing to the development of quantum technologies in Brazil and related applications.