Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

International Conference on Power System and Energy Technology (ICPSET)

A Hybrid Classical-Quantum Newton-Raphson Framework for Power Flow Computation

Xin Jin, Jun Lu, Lanlan Zhang, Bofan Wu, Heng Fan

Published Jul 1, 2026• 0 citations
Publisher

Abstract

The Newton-Raphson method, despite its quadratic convergence, faces a growing performance bottleneck in solving high-dimensional sparse linear systems as power grid scale and complexity increase. This paper proposes a hybrid classical-quantum Newton-Raphson framework for power flow computation. On the classical side, the polar-coordinate Newton-Raphson iteration and Jacobian assembly are retained; on the quantum side, Krylov subspace reduction is coupled with a variational quantum linear solver (VQLS) to solve the projected low-dimensional linear system. A residual-driven nested iterative refinement strategy and the parameter shift rule are introduced to ensure solution accuracy and gradient efficiency, respectively. Due to current quantum chip hardware constraints, five physical qubits with relatively high fidelity are selected for validation on the domestically developed Origin Wukong superconducting quantum processor. The IEEE 57-bus system (106-dimensional Jacobian) and the Hefei 81-bus regional grid system (141-dimensional) both converge within three Newton iterations with maximum power mismatch below$1 \times 10^{-3}$; voltage relative errors are under$1 \times 10^{-5}$for the 57 -bus case and under$1 \times 10^{-3}$for the 81-bus case. These results demonstrate that the hybrid architecture can deliver accurate power flow solutions under NISQ-era hardware constraints.

DOI
10.1109/icpset70907.2026.11688885

Related papers

A Hybrid Quantum–Classical Variational Linear Solver for Power Flow Analysis in Smart Grids with V2G Integration

Siriwat Ninlawat, Kajornsak Singhun, Thananan Chooseang +4 more

This paper presents a simulation-based proof of concept for integrating an existing Variational Quantum Linear Solver (VQLS) with a Newton-type AC power flow procedure for smart grids with vehicle-to-grid (V2G) participation. The novelty of the work lies not in proposing a new VQLS algorithm but in its engineering integration with a reduced Jacobian-based power flow subproblem and V2G operating scenarios. The proposed framework linearizes the nonlinear AC power flow equations and applies a four-qubit Real-Amplitudes VQLS circuit with the COBYLA optimizer to approximate a selected 16 × 16 reduced Jacobian system. The complete voltage profile is then reconstructed through the hybrid quantum–classical procedure. The method is evaluated using a modified IEEE 33-bus radial distribution system with an aggregated V2G unit connected at Bus 18. The main optimization run shows a rapid reduction and subsequent stabilization of the VQLS cost, while the resulting bus-voltage profile follows the overall trend of the Newton–Raphson reference solution. A separate 50-iteration assessment also reduces the cost substantially but does not reach the reference tolerance of 10−4. The V2G scenario analysis shows that prescribed V2G active-power support can reduce active power losses under both normal and stressed operating conditions, with loss reductions of 26.26%, 27.85%, and 30.52% in the base peak-load, N-1 contingency support, and dynamic railway-peak support cases, respectively. A resource-scaling assessment using a normalized classical computation index and a VQLS circuit-depth index is included only to illustrate resource-growth trends, not to establish computational superiority. The results support the feasibility of the proposed integration under ideal statevector simulation, but no quantum speedup or advantage over established classical solvers is claimed.

Electricity•Sep 16, 2026•0 citations

Hybrid Quantum-Classical Algorithm for Power Flow Analysis of IEEE 30-bus System using Variational Quantum Linear Solve

Kajornsak Singhun, Siriwat Ninlawat, Thananan Chooseang +2 more

This paper presents a hybrid quantum–classical framework for power flow analysis of the IEEE 30-Bus system using the Variational Quantum Linear Solver (VQLS). While fault-tolerant quantum algorithms such as HHL offer theoretical advantages, their practical implementation remains limited by issues such as state preparation and circuit complexity. To address these challenges, this study adopts VQLS, which is more suitable for Noisy Intermediate-Scale Quantum (NISQ) devices. The linearized power flow equations are reformulated into a quantum-compatible form and solved through a hybrid optimization process that combines parameterized quantum circuits with classical optimization. The framework is implemented using Qiskit and Pandapower and evaluated under both normal operating conditions and N-1 contingency scenarios. The results show that the VQLS-based solver can achieve stable convergence of the cost function. Although convergence becomes slower under line-outage conditions, the algorithm remains capable of approaching a feasible solution. These results indicate that hybrid quantum–classical methods may provide a promising direction for future power system analysis.

International Conference on Electrical Engineering/Electronics, Computer, Telecommunications and Information Technology (ECTI-CON)•May 1, 2026•0 citations

Newton-Raphson Method Using HHL Algorithm for Power Flow Quantum Computing

Ziad El-Khatib, Sherif Moussa

This paper presents Newton-Raphson method using HHL algorithm for power flow quantum computation. The proposed Newton-Raphson HHL Quantum method converges to the solution within four iterations compared to the Newton-Raphson classical solution which converged in five iterations. The Newton-Raphson classical solution voltage$\mathrm{V}_{2}=0.96674$pu, angle$\delta_{2}=-0.04816$rads, angle$\delta_{3}=0.04096$rads. The Newton-Raphson-HHL Quantum method voltage$\mathrm{V}_{2}= 0.98173$pu, angle$\delta_{2}=-0.05018$rads, angle$\delta_{3}=0.04021$rads. This work Newton-Raphson HHL Quantum method for 3-bus time to converge is O.$228\mathrm{s}$. The fidelity is calculated to be 0.981436 with circuit width of 4 which is the number of qubits used in the circuit and the circuit depth gate layers is 126.

International Conference on Sustainable Mobility Applications, Renewables and Technology (SMART)•Nov 22, 2024•2 citations

PyQLAS: A Quantum-Classical Hybrid Solver Library for Linear Systems

Meng-Han Dou, Teng-Yang Ma, Chuang-Chao Ye +2 more

Quantum algorithms solve a linear system at a cost that grows only polylogarithmically in its dimension, but on present-day hardware that advantage is realised only if the quantum and the classical parts of a solve are apportioned deliberately. We present PyQLAS, a quantum--classical hybrid library for linear systems that exposes this apportionment as a design parameter rather than a fixed assumption. PyQLAS builds three nested solvers around a single variational core---a variational solver, an outer residual iteration, and a Krylov-subspace projection---so that the quantum subroutine can be held at a fixed circuit width while the classical host absorbs the growth of the problem. Around them, the library supplies preconditioning at two independent levels, dimension alignment, checkpointing, and device-budget control, and a solve written against the interface runs unchanged on an exact state-vector simulator, on a local sampler, and on a real superconducting processor. The library is validated on the IEEE 118-bus power flow, a standard test system in which the linear solver is embedded in a classical Newton iteration. There, the iteration converges to the specified tolerance and reproduces the classical reference solution to within $2.3\times10^{-8}$ p.u.\ in voltage magnitude and $3.4\times10^{-6}$ degrees in voltage angle.

quant-pharXiv:2610.41317•Nov 2, 2026•0 citations

A Hybrid Quantum Algorithm for Load Flow

David A. Neufeld, Sajad Fathi Hafshejani, Daya Ram Gaur +1 more

The goal of the load flow study is to ensure that electrical power is delivered efficiently and reliably to end-users while maintaining the stability and security of the power system. Newton-Raphson is a numerical method used widely for load flow analysis. One of the most computationally expensive steps in this method is an equation-solving step. We propose to replace this step with HHL, a quantum algorithm for solving linear systems of equations. HHL is exponentially faster, but with caveats. In this study, a hybrid quantum algorithm is proposed for solving load flow. The Newton-Raphson method is used as a benchmark to compare the performance of the hybrid quantum algorithm. Although the simulation of the hybrid quantum algorithm takes much time, these preliminary results are encouraging and point to the potential for the use of quantum algorithms to develop hybrid quantum algorithms for load flow analysis and related problems.

arXiv:2310.19953•Advances in transdisciplinary engineering•Jun 20, 2024•4 citations

Physics-Informed Hybrid Quantum-Classical Dispatching for Large-Scale Renewable Power Systems:A Noise-Resilient Framework

Fu Zhang, Yuming Zhao

The integration of high-penetration renewable energy introduces significant stochasticity and non-convexity into power system dispatching, challenging the computational limits of classical optimization. While Variational Quantum Algorithms (VQAs) on Noisy Intermediate-Scale Quantum (NISQ) devices offer a promising path for combinatorial acceleration, existing approaches typically treat the power grid as a "black box", suffering from poor scalability (barren plateaus) and frequent violations of physical constraints. Bridging these gaps, this paper proposes a Physics-Informed Hybrid Quantum-Classical Dispatching (PI-HQCD) framework. We construct a topology-aware Hamiltonian that explicitly embeds linearized power flow equations, storage dynamics, and multi-timescale coupling directly into the quantum substrate, significantly reducing the search space dimensionality. We further derive a noise-adaptive regularization mechanism that theoretically bounds the effective Lipschitz constant of the objective function, guaranteeing convergence stability under realistic quantum measurement noise. Numerical experiments on the IEEE 39-bus benchmark and a 118-bus regional grid demonstrate that PI-HQCD achieves superior economic efficiency and higher renewable utilization compared to stochastic dual dynamic programming (SDDP). Theoretical analysis confirms that this topology-aware design leads to an O(1/N) gradient variance scaling, effectively mitigating barren plateaus and ensuring scalability for larger networks. This work establishes a rigorous paradigm for embedding engineering physics into quantum computing, paving the way for practical quantum advantage in next-generation grid operations.

quant-pharXiv:2601.18482•Jan 27, 2026•2 citations
The Newton-Raphson method, despite its quadratic convergence, faces a growing performance bottleneck in solving high-dimensional sparse linear systems as power grid scale and complexity increase. This paper proposes a hybrid classical-quantum Newton-Raphson framework for power flow computation. On the classical side, the polar-coordinate Newton-Raphson iteration and Jacobian assembly are retained; on the quantum side, Krylov subspace reduction is coupled with a variational quantum linear solver (VQLS) to solve the projected low-dimensional linear system. A residual-driven nested iterative refinement strategy and the parameter shift rule are introduced to ensure solution accuracy and gradient efficiency, respectively. Due to current quantum chip hardware constraints, five physical qubits with relatively high fidelity are selected for validation on the domestically developed Origin Wukong superconducting quantum processor. The IEEE 57-bus system (106-dimensional Jacobian) and the Hefei 81-bus regional grid system (141-dimensional) both converge within three Newton iterations with maximum power mismatch below1×10−31 \times 10^{-3}1×10−3; voltage relative errors are under1×10−51 \times 10^{-5}1×10−5for the 57 -bus case and under1×10−31 \times 10^{-3}1×10−3for the 81-bus case. These results demonstrate that the hybrid architecture can deliver accurate power flow solutions under NISQ-era hardware constraints.
This paper presents a simulation-based proof of concept for integrating an existing Variational Quantum Linear Solver (VQLS) with a Newton-type AC power flow procedure for smart grids with vehicle-to-grid (V2G) participation. The novelty of the work lies not in proposing a new VQLS algorithm but in its engineering integration with a reduced Jacobian-based power flow subproblem and V2G operating scenarios. The proposed framework linearizes the nonlinear AC power flow equations and applies a four-qubit Real-Amplitudes VQLS circuit with the COBYLA optimizer to approximate a selected 16 × 16 reduced Jacobian system. The complete voltage profile is then reconstructed through the hybrid quantum–classical procedure. The method is evaluated using a modified IEEE 33-bus radial distribution system with an aggregated V2G unit connected at Bus 18. The main optimization run shows a rapid reduction and subsequent stabilization of the VQLS cost, while the resulting bus-voltage profile follows the overall trend of the Newton–Raphson reference solution. A separate 50-iteration assessment also reduces the cost substantially but does not reach the reference tolerance of 10−4. The V2G scenario analysis shows that prescribed V2G active-power support can reduce active power losses under both normal and stressed operating conditions, with loss reductions of 26.26%, 27.85%, and 30.52% in the base peak-load, N-1 contingency support, and dynamic railway-peak support cases, respectively. A resource-scaling assessment using a normalized classical computation index and a VQLS circuit-depth index is included only to illustrate resource-growth trends, not to establish computational superiority. The results support the feasibility of the proposed integration under ideal statevector simulation, but no quantum speedup or advantage over established classical solvers is claimed.
This paper presents a hybrid quantum–classical framework for power flow analysis of the IEEE 30-Bus system using the Variational Quantum Linear Solver (VQLS). While fault-tolerant quantum algorithms such as HHL offer theoretical advantages, their practical implementation remains limited by issues such as state preparation and circuit complexity. To address these challenges, this study adopts VQLS, which is more suitable for Noisy Intermediate-Scale Quantum (NISQ) devices. The linearized power flow equations are reformulated into a quantum-compatible form and solved through a hybrid optimization process that combines parameterized quantum circuits with classical optimization. The framework is implemented using Qiskit and Pandapower and evaluated under both normal operating conditions and N-1 contingency scenarios. The results show that the VQLS-based solver can achieve stable convergence of the cost function. Although convergence becomes slower under line-outage conditions, the algorithm remains capable of approaching a feasible solution. These results indicate that hybrid quantum–classical methods may provide a promising direction for future power system analysis.
This paper presents Newton-Raphson method using HHL algorithm for power flow quantum computation. The proposed Newton-Raphson HHL Quantum method converges to the solution within four iterations compared to the Newton-Raphson classical solution which converged in five iterations. The Newton-Raphson classical solution voltageV2=0.96674\mathrm{V}_{2}=0.96674V2​=0.96674pu, angleδ2=−0.04816\delta_{2}=-0.04816δ2​=−0.04816rads, angleδ3=0.04096\delta_{3}=0.04096δ3​=0.04096rads. The Newton-Raphson-HHL Quantum method voltageV2=0.98173\mathrm{V}_{2}= 0.98173V2​=0.98173pu, angleδ2=−0.05018\delta_{2}=-0.05018δ2​=−0.05018rads, angleδ3=0.04021\delta_{3}=0.04021δ3​=0.04021rads. This work Newton-Raphson HHL Quantum method for 3-bus time to converge is O.228s228\mathrm{s}228s. The fidelity is calculated to be 0.981436 with circuit width of 4 which is the number of qubits used in the circuit and the circuit depth gate layers is 126.
Quantum algorithms solve a linear system at a cost that grows only polylogarithmically in its dimension, but on present-day hardware that advantage is realised only if the quantum and the classical parts of a solve are apportioned deliberately. We present PyQLAS, a quantum--classical hybrid library for linear systems that exposes this apportionment as a design parameter rather than a fixed assumption. PyQLAS builds three nested solvers around a single variational core---a variational solver, an outer residual iteration, and a Krylov-subspace projection---so that the quantum subroutine can be held at a fixed circuit width while the classical host absorbs the growth of the problem. Around them, the library supplies preconditioning at two independent levels, dimension alignment, checkpointing, and device-budget control, and a solve written against the interface runs unchanged on an exact state-vector simulator, on a local sampler, and on a real superconducting processor. The library is validated on the IEEE 118-bus power flow, a standard test system in which the linear solver is embedded in a classical Newton iteration. There, the iteration converges to the specified tolerance and reproduces the classical reference solution to within 2.3×10−82.3\times10^{-8}2.3×10−8 p.u.\ in voltage magnitude and 3.4×10−63.4\times10^{-6}3.4×10−6 degrees in voltage angle.
The goal of the load flow study is to ensure that electrical power is delivered efficiently and reliably to end-users while maintaining the stability and security of the power system. Newton-Raphson is a numerical method used widely for load flow analysis. One of the most computationally expensive steps in this method is an equation-solving step. We propose to replace this step with HHL, a quantum algorithm for solving linear systems of equations. HHL is exponentially faster, but with caveats. In this study, a hybrid quantum algorithm is proposed for solving load flow. The Newton-Raphson method is used as a benchmark to compare the performance of the hybrid quantum algorithm. Although the simulation of the hybrid quantum algorithm takes much time, these preliminary results are encouraging and point to the potential for the use of quantum algorithms to develop hybrid quantum algorithms for load flow analysis and related problems.
The integration of high-penetration renewable energy introduces significant stochasticity and non-convexity into power system dispatching, challenging the computational limits of classical optimization. While Variational Quantum Algorithms (VQAs) on Noisy Intermediate-Scale Quantum (NISQ) devices offer a promising path for combinatorial acceleration, existing approaches typically treat the power grid as a "black box", suffering from poor scalability (barren plateaus) and frequent violations of physical constraints. Bridging these gaps, this paper proposes a Physics-Informed Hybrid Quantum-Classical Dispatching (PI-HQCD) framework. We construct a topology-aware Hamiltonian that explicitly embeds linearized power flow equations, storage dynamics, and multi-timescale coupling directly into the quantum substrate, significantly reducing the search space dimensionality. We further derive a noise-adaptive regularization mechanism that theoretically bounds the effective Lipschitz constant of the objective function, guaranteeing convergence stability under realistic quantum measurement noise. Numerical experiments on the IEEE 39-bus benchmark and a 118-bus regional grid demonstrate that PI-HQCD achieves superior economic efficiency and higher renewable utilization compared to stochastic dual dynamic programming (SDDP). Theoretical analysis confirms that this topology-aware design leads to an O(1/N) gradient variance scaling, effectively mitigating barren plateaus and ensuring scalability for larger networks. This work establishes a rigorous paradigm for embedding engineering physics into quantum computing, paving the way for practical quantum advantage in next-generation grid operations.