This paper presents a hybrid quantum–classical framework for power flow analysis of the IEEE 30-Bus system using the Variational Quantum Linear Solver (VQLS). While fault-tolerant quantum algorithms such as HHL offer theoretical advantages, their practical implementation remains limited by issues such as state preparation and circuit complexity. To address these challenges, this study adopts VQLS, which is more suitable for Noisy Intermediate-Scale Quantum (NISQ) devices. The linearized power flow equations are reformulated into a quantum-compatible form and solved through a hybrid optimization process that combines parameterized quantum circuits with classical optimization. The framework is implemented using Qiskit and Pandapower and evaluated under both normal operating conditions and N-1 contingency scenarios. The results show that the VQLS-based solver can achieve stable convergence of the cost function. Although convergence becomes slower under line-outage conditions, the algorithm remains capable of approaching a feasible solution. These results indicate that hybrid quantum–classical methods may provide a promising direction for future power system analysis.
This paper presents a hybrid quantum–classical framework for power flow analysis of the IEEE 30-Bus system using the Variational Quantum Linear Solver (VQLS). While fault-tolerant quantum algorithms such as HHL offer theoretical advantages, their practical implementation remains limited by issues such as state preparation and circuit complexity. To address these challenges, this study adopts VQLS, which is more suitable for Noisy Intermediate-Scale Quantum (NISQ) devices. The linearized power flow equations are reformulated into a quantum-compatible form and solved through a hybrid optimization process that combines parameterized quantum circuits with classical optimization. The framework is implemented using Qiskit and Pandapower and evaluated under both normal operating conditions and N-1 contingency scenarios. The results show that the VQLS-based solver can achieve stable convergence of the cost function. Although convergence becomes slower under line-outage conditions, the algorithm remains capable of approaching a feasible solution. These results indicate that hybrid quantum–classical methods may provide a promising direction for future power system analysis.
This paper presents a simulation-based proof of concept for integrating an existing Variational Quantum Linear Solver (VQLS) with a Newton-type AC power flow procedure for smart grids with vehicle-to-grid (V2G) participation. The novelty of the work lies not in proposing a new VQLS algorithm but in its engineering integration with a reduced Jacobian-based power flow subproblem and V2G operating scenarios. The proposed framework linearizes the nonlinear AC power flow equations and applies a four-qubit Real-Amplitudes VQLS circuit with the COBYLA optimizer to approximate a selected 16 × 16 reduced Jacobian system. The complete voltage profile is then reconstructed through the hybrid quantum–classical procedure. The method is evaluated using a modified IEEE 33-bus radial distribution system with an aggregated V2G unit connected at Bus 18. The main optimization run shows a rapid reduction and subsequent stabilization of the VQLS cost, while the resulting bus-voltage profile follows the overall trend of the Newton–Raphson reference solution. A separate 50-iteration assessment also reduces the cost substantially but does not reach the reference tolerance of 10−4. The V2G scenario analysis shows that prescribed V2G active-power support can reduce active power losses under both normal and stressed operating conditions, with loss reductions of 26.26%, 27.85%, and 30.52% in the base peak-load, N-1 contingency support, and dynamic railway-peak support cases, respectively. A resource-scaling assessment using a normalized classical computation index and a VQLS circuit-depth index is included only to illustrate resource-growth trends, not to establish computational superiority. The results support the feasibility of the proposed integration under ideal statevector simulation, but no quantum speedup or advantage over established classical solvers is claimed.
This paper presents a quantum-enhanced optimization approach for solving optimal power flow (OPF) by integrating the interior point method (IPM) with a coherent variational quantum linear solver (CVQLS). The objective is to explore the applicability of quantum computing to power systems optimization and address the associated challenges. A comparative analysis of state-of-the-art quantum linear solvers—Harrow-Hassidim-Lloyd (HHL), variational quantum linear solver (VQLS), and CVQLS—revealed that CVQLS is most suitable for OPF due to its stability with ill-conditioned matrices, such as the Hessian in IPM. To ensure high-quality solutions, prevent suboptimal convergence, and avoid the barren plateau problem, we propose a quantum circuit parameter initialization technique along with a method to guide the IPM along the central path. Moreover, we design an ansatz tailored for OPF, optimizing the expressibility and trainability of the quantum circuit to ensure efficient convergence and robustness in solving quantum OPF. Various optimizers are also tested for quantum circuit parameter optimization to select the best one. We evaluate our approaches on multiple systems to show their effectiveness in providing reliable OPF solutions. Simulations for the 2-bus system are conducted on a commercial IBMQ quantum device, while simulations for the other larger cases are performed using the IBM quantum simulator. While promising, CVQLS is limited by current quantum hardware, especially for larger systems. We use a quantum noise simulator to test scalability.
The Newton-Raphson method, despite its quadratic convergence, faces a growing performance bottleneck in solving high-dimensional sparse linear systems as power grid scale and complexity increase. This paper proposes a hybrid classical-quantum Newton-Raphson framework for power flow computation. On the classical side, the polar-coordinate Newton-Raphson iteration and Jacobian assembly are retained; on the quantum side, Krylov subspace reduction is coupled with a variational quantum linear solver (VQLS) to solve the projected low-dimensional linear system. A residual-driven nested iterative refinement strategy and the parameter shift rule are introduced to ensure solution accuracy and gradient efficiency, respectively. Due to current quantum chip hardware constraints, five physical qubits with relatively high fidelity are selected for validation on the domestically developed Origin Wukong superconducting quantum processor. The IEEE 57-bus system (106-dimensional Jacobian) and the Hefei 81-bus regional grid system (141-dimensional) both converge within three Newton iterations with maximum power mismatch below1×10−3; voltage relative errors are under1×10−5for the 57 -bus case and under1×10−3for the 81-bus case. These results demonstrate that the hybrid architecture can deliver accurate power flow solutions under NISQ-era hardware constraints.
Quantum power flow (QPF) offers an inspiring direction for overcoming the computation challenge of power flow through quantum computing. However, the practical implementation of existing QPF algorithms in today's noisy-intermediate-scale quantum (NISQ) era remains limited because of their sensitivity to noise. This paper establishes an NISQ-QPF algorithm that enables power flow computation on noisy quantum devices. The main contributions include: (1) a variational quantum circuit (VQC)-based alternating current (AC) power flow formulation, which enables QPF using short-depth quantum circuits; (2) NISQ-compatible QPF solvers based on the variational quantum linear solver (VQLS) and modified fast decoupled power flow; and (3) an error-resilient QPF scheme to relieve the QPF iteration deviations caused by noise; (3) a practical NISQ-QPF framework for implementable and reliable power flow analysis on noisy quantum machines. Extensive simulation tests validate the accuracy and generality of NISQ-QPF for solving practical power flow on IBM's real, noisy quantum computers.
The rapid development of quantum computing has provided a ground-breaking tool for solving problems that are insurmountable on classical computers. In the power system domain, quantum computing is still in the nascent stage, with limited but ongoing studies. The Quantum Approximation Optimization Algorithm (QAOA) has been applied in solving several NPhard problems and can be further studied to address challenging problems in power systems. Key applications include contingency analysis, optimal power flow, and unit commitment, among others. With the significant integration of renewable energy, the intermittent nature of renewable energy introduces substantial volatility to the system. An overhead contingency analysis is required to evaluate the possible system outage scenarios, which will identify critical contingencies to maintain system stability. However, the contingency analysis is a prototypical NP-Hard problem, requiring substantial classical computation resources. In this work, QAOA is developed for theN−kcontingency analysis on line contingency as well as the general contingency scenarios, with the aim of minimizing the shedding of the power load while ensuring the power flow constraints. A tailored objective function is developed to encode theN−kcontingency condition as well as the power flow loss constraints into a problem Hamiltonian for QAOA computation. The developed method is verified on IEEE 9- and 14-bus systems compared with classical methods as the baseline. In addition, a QAOA parameter study including the number of QAOA parameters, the number of repetitions of the quantum circuits execution, and the number of iteration steps of the classical optimization algorithm, is conducted to offer insights for the parameter tuning under different problem sizes. This work is anticipated to establish a quantum framework for solving critical and complex power system problems in the Noisy intermediate-scale quantum (NISQ) era.
Voltage source converters (VSCs) play a critical role in modern power systems, where their simulation requires solving linear system problems and remains computationally expensive. Quantum linear system solvers, particularly the variational quantum linear solver (VQLS) tailored for noisy intermediate-scale quantum devices, offer a competitive paradigm with the potential for developing linear solvers with logarithmically scaled computational complexity. We propose Acc-VQLS, a domain-specific quantum algorithm and circuit co-optimization method that accelerates traditional VQLS for VSC simulation. We adopt constant vector-based variational quantum circuits for fast convergence with efficient initial state preparation and employ multi-core processing to parallelize the cost function evaluation and gradient computation. To demonstrate the potential applicability of Acc-VQLS in VSC operating scenarios, we employ the commonly used fault behavior model for VQLS-based VSC simulation. Quantitative experimental evaluations and comparisons across the tested benchmarks show that the proposed Acc-VQLS reduces iterations required for cost function convergence by an average of 82.5%, and our multi-core parallel computing strategy achieves a 53.9 × speedup on the AMD EPYC 9554 CPU. By incorporating a short-circuit fault in the VSC simulation, the proposed Acc-VQLS with error compensation achieves less than 10 − 9 in both the mean absolute error and the root mean square error.