Optical lattice clocks utilizing strontium (Sr) and ytterbium (Yb) are essential for high-precision metrology and the maintenance of critical infrastructure; however, their practical deployment is currently hindered by significant size, weight, and power (SWaP) constraints. While recent advancements have led to more compact architectures, the footprint and energy consumption of the atomic source remain a primary bottleneck. In this work, we demonstrate key miniaturization technologies: a micro-structured chip-based oven and in-vacuum optics that enable a 3D magneto-optical trap (MOT) using only a single laser beam. When integrated with a pyramid reflector MOT, the LIDE-fabricated oven achieves loading rates exceeding 108 174Yb atoms/s at heating powers below 0.3 W. Furthermore, we demonstrate the trapping of 105 Sr atoms evaporated from the micro-oven within a compact, additively manufactured titanium vacuum chamber (V < 0.75 l) utilizing a grating-chip-based 88Sr MOT.
Optical lattice clocks utilizing strontium (Sr) and ytterbium (Yb) are essential for high-precision metrology and the maintenance of critical infrastructure; however, their practical deployment is currently hindered by significant size, weight, and power (SWaP) constraints. While recent advancements have led to more compact architectures, the footprint and energy consumption of the atomic source remain a primary bottleneck. In this work, we demonstrate key miniaturization technologies: a micro-structured chip-based oven and in-vacuum optics that enable a 3D magneto-optical trap (MOT) using only a single laser beam. When integrated with a pyramid reflector MOT, the LIDE-fabricated oven achieves loading rates exceeding 108 174Yb atoms/s at heating powers below 0.3 W. Furthermore, we demonstrate the trapping of 105 Sr atoms evaporated from the micro-oven within a compact, additively manufactured titanium vacuum chamber (V < 0.75 l) utilizing a grating-chip-based 88Sr MOT.
Optical lattice clocks based on ytterbium (Yb) and strontium (Sr) are emerging as key technologies in precision timekeeping and metrology. Recent advancements in miniaturization and transportability are making them increasingly accessible for applications outside traditional laboratory settings. However, the degree of miniaturization is limited by the atomic source that is used to provide laser-cooled atoms for the clock spectroscopy. Conventional atomic sources for optical lattice clocks consist of a high-power oven and a magneto-optical trap (MOT) that requires six incident laser beams for three-dimensional trapping and cooling. Here, we present technologies that allow a significant miniaturization of the required experimental setups to realize a MOT for Yb and Sr. These are a chip-based microstructured atomic oven and in-vacuum optical elements that require only a single incident laser beam to generate all of the required beams for three-dimensional trapping and cooling. The oven was manufactured with LIDE® (laser induced deep etching). It was paired with an aluminum pyramid reflector to load Yb atoms into a MOT. The oven was placed directly at the outside of the reflector, forming a compact setup that is used for atom evaporation and direct trapping and cooling. In this configuration, MOT loading rates above 10^8 atoms/s were measured for oven heating powers below 250 mW. Furthermore, the microstructured oven was paired with a grating MOT chip inside a highly compact vacuum chamber. The chamber was additively manufactured from titanium and the assembled setup spans a volume of less than 750 ml. In this setup, up to 10^5 Sr atoms were trapped in the MOT.
Quantum sensors, like optical lattice clocks, undergo a continuous development from lab-based towards mobile systems. A key aspect in the miniaturization of the experimental setups is the development of compact atom sources. Conventional atom sources for alkaline-earth-like elements consist of a high-power oven and a six-beam magneto-optical trap (MOT) inside of vacuum chamber with extensive flanges, viewports and electrical feedthroughs. Here we present a highly compact vacuum package utilizing key technologies for future quantum sensor systems: A chip-based low-power atomic oven, a planar grating MOT chip, and a miniaturized vacuum pump all held inside an additively manufactured titanium vacuum chamber, featuring custom-sized vacuum flanges. In this miniaturized setup, spanning a volume of only 750 ml, we trap up to 105 Sr atoms in a MOT, requiring an oven heating power below 1 W.
Atomic clocks are crucial for precise time dissemination, supporting industrial applications for navigation, telecommunication, the financial system, and the energy industry by ensuring accurate timekeeping and synchronization. At present, the best atomic clocks are based on optical transitions. Optical lattice clocks based on Yb or Sr achieve fractional frequency uncertainties in the low 10^−18 regime. This remarkable accuracy allows resolving the gravitational redshift on the centimeter scale. This progress has driven the development of compact transportable optical lattice clocks, which are crucial for field- or even space applications. Especially for space operation, there is a critical need to minimize size, weight and power consumption of key components, particularly the source of laser-cooled atoms. Conventional atom sources for optical lattice clocks consist of an atomic oven with a high power consumption and a six-beam magneto-optical trap (MOT) that requires a large and complex optical setup. This thesis addresses the technical challenges associated with the development of compact sources of laser-cooled alkaline-earth-like atoms by demonstrating a miniaturized atomic oven and a miniaturized MOT for Yb and Sr. The MOT generation is tested with three types of in-vacuum optical elements that generate all the required laser beams for three-dimensional trapping and cooling with only one single input beam. A quasi-monolithic aluminum structure generating a conventional MOT beam geometry that is called pyramid reflector is compared to a quasi-planar optical element called Fresnel reflector. Both are characterized and compared using the same high-flux Yb source. Particularly, two-stage cooling of a fermionic alkaline-earth-like atom in a non-conventional MOT configuration is performed for the first time, demonstrating the applicability of planar MOT optics in optical lattice clocks. Furthermore, a planar diffraction grating is combined with the miniaturized atomic oven inside a highly compact vacuum chamber. The atomic oven is based on a circular fused silica chip and is tested by loading an Yb MOT generated with the pyramid reflector and a Sr MOT generated with the diffraction grating. It requires less than 250 mW of electrical heating power to generate a MOT loading rate above 10^8 atoms/s with the pyramid reflector. The presented components form a compact source of laser-cooled Yb or Sr atoms, and, when combined with a compact optical lattice setup, will serve as the basic building blocks of a future transportable optical lattice clock.
We demonstrate direct loading of a strontium (Sr) magneto-optical trap (MOT) from a thermal atomic beam in a single-chamber vacuum system. The MOT operates without a Zeeman slower, a slowing laser, a two-dimensional MOT, or differential pumping, while the entire system is maintained in the ultra-high-vacuum regime by a single ion pump. At an oven temperature of 395 °C, the MOT captures up to 107 88Sr atoms with a loading rate of 107 atoms s-1, while sustaining a background gas pressure of 1 × 10-9 Torr. At this oven temperature, the MOT lifetime limited by collisions with background gas is ∼5s, with the atom number primarily constrained by light-assisted two-body collisions. Eliminating differential pumping and precooling stages significantly reduces the system's size, weight, and power requirements, providing a robust and practical platform for field-deployable and spaceborne optical lattice clocks, as well as a variety of other applications requiring compact ultracold atom sources.
Atomic clocks are crucial for precise time dissemination, supporting industrial applications for navigation, telecommunication, the financial system, and the energy industry by ensuring accurate timekeeping and synchronization. At present, the best atomic clocks are based on optical transitions. Optical lattice clocks based on Yb or Sr achieve fractional frequency uncertainties in the low 10^(-18) regime. This remarkable accuracy allows resolving the gravitational redshift on the centimeter scale. This progress has driven the development of compact transportable optical lattice clocks, which are crucial for field- or even space applications. Especially for space operation, there is a critical need to minimize size, weight and power consumption of key components, particularly the source of laser-cooled atoms. Conventional atom sources for optical lattice clocks consist of an atomic oven with a high power consumption and a six-beam magneto-optical trap (MOT) that requires a large and complex optical setup. This thesis addresses the technical challenges associated with the development of compact sources of laser-cooled alkaline-earth-like atoms by demonstrating a miniaturized atomic oven and a miniaturized MOT for Yb and Sr. The MOT generation is tested with three types of in-vacuum optical elements that generate all the required laser beams for three-dimensional trapping and cooling with only one single input beam. A quasi-monolithic aluminum structure generating a conventional MOT beam geometry that is called pyramid reflector is compared to a quasi-planar optical element called Fresnel reflector. Both are characterized and compared using the same high-flux Yb source. Particularly, two-stage cooling of a fermionic alkaline-earth-like atom in a non-conventional MOT configuration is performed for the first time, demonstrating the applicability of planar MOT optics in optical lattice clocks. Furthermore, a planar diffraction grating is combined with the miniaturized atomic oven inside a highly compact vacuum chamber. The atomic oven is based on a circular fused silica chip and is tested by loading an Yb MOT generated with the pyramid reflector and a Sr MOT generated with the diffraction grating. It requires less than 250 mW of electrical heating power to generate a MOT loading rate above 10^8 atoms/s with the pyramid reflector. The presented components form a compact source of laser-cooled Yb or Sr atoms, and, when combined with a compact optical lattice setup, will serve as the basic building blocks of a future transportable optical lattice clock.
Alkaline-earth-like elements play pivotal roles in advanced quantum sensing technologies, notably optical clocks, with unprecedented precision achieved in recent years. Despite remarkable progress, current optical-lattice clocks still face challenges in meeting the demanding size, weight, and power consumption constraints essential for space applications. Conventional atom sources, such as ovens or dispensers, require substantial heating power, which makes up a significant fraction of the overall power consumption of the system. Addressing this challenge, we present a microstructured atomic oven based on fused silica, designed for miniaturization and low-power operation. We characterize the oven by loading a magneto-optical trap with Yb evaporated from the oven and demonstrate operation with a loading rate above 10 8 atoms / s for heating powers below 250 mW.