Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

NANO

Fluorescence Response of Nitrogen-Vacancy Centers in Diamond on Tapered Optical Fiber Tips Decorated with Silver Nanoparticles

Qiao Yang, Xin Tan, Wenwang Zheng, Zhanqing He, Jian Wang, Hui Qi

Published Sep 11, 2026• 0 citations
Publisher

Abstract

Nitrogen-vacancy (NV) color centers in diamond are a promising solid-state quantum sensing platform, but their fluorescence collection is severely constrained by the high refractive index of diamond ([Formula: see text]), which causes strong total internal reflection at the diamond-air interface and limits the signal-to-noise ratio for practical applications. Here we report the fluorescence response of a tapered optical-fiber probe comprising a CVD-grown nitrogen-doped polycrystalline diamond film and self-assembled silver nanoparticles (Ag NPs). A large-angle tapered tip ([Formula: see text]20[Formula: see text], [Formula: see text]370[Formula: see text][Formula: see text]m long) is fabricated by hydrofluoric-acid wet etching; an in situ nitrogen-doped diamond thin film is grown by microwave plasma CVD; and a 15[Formula: see text]nm Ag film is deposited by sputtering and annealed at 350[Formula: see text]C for 10[Formula: see text]min to dewet into a dense array of Ag NPs. A fused-silica witness sample prepared under the same Ag deposition and annealing conditions exhibits a broad absorption band that covers the 532[Formula: see text]nm excitation line and extends through the 637[Formula: see text]nm zero-phonon line into the NV emission region. Steady-state photoluminescence measurements show an approximately 1.51-fold increase in the detected NV fluorescence intensity at 637[Formula: see text]nm after Ag-NP processing. Time-correlated single-photon counting reveals that the intensity-weighted mean fluorescence lifetime changes from [Formula: see text][Formula: see text]ns (bare diamond) to 9.48[Formula: see text]±[Formula: see text]0.86[Formula: see text]ns (Ag NPs/diamond) across eight independent probes, corresponding to a lifetime-derived total decay-rate enhancement factor [Formula: see text]. Together, the paired measurements show increased detected brightness and faster total decay; however, the radiative and non-radiative contributions remain unresolved, which prohibits exclusive attribution of the observed variations to plasmonic NP effects. The fabrication route provides a fiber-integrated platform for further optical characterization.

DOI
10.1142/s1793292026501675

Related papers

Thickness dependent surface plasmon of silver film detected by nitrogen vacancy centers in diamond

Dengfeng Li, Cuihong Li, Lei‐Ming Zhou +7 more

Precise detection of surface plasmons is crucial for the research of nanophotonics and quantum optics. In this Letter, we used a single nitrogen vacancy center in diamond as a probe to detect the surface plasmon that was tuned by the thickness of a metallic film. The fluorescence intensity and lifetime of the nitrogen vacancy (NV) center were measured to obtain the information of local light-matter interaction. A nonlinear thickness dependent change of the surface plasmon was observed, with the maximum at the thickness of approximately 30 nm. With optimized thickness of silver film, the fluorescence intensity of a single NV center was enhanced 2.6 times, and the lifetime was reduced by a factor of 3, without affecting the coherence time of the NV spin state. The results proved that this system can quantitatively detect the light-matter interaction at nanoscale, and it provides an approach to enhance the fluorescence intensity of a quantum emitter.

Optics Letters•Nov 8, 2018•7 citations

Photoluminescence characterization of NV centers in CVD diamond as a function of different nitrogen doping levels for quantum sensing applications

Sierra Gómez, Javier, Silva Neto, José Vieira da, Trava Airoldi, Vladimir Jesus +1 more

Nitrogen-vacancy (NV) centers in single-crystal CVD diamond are promising candidates for quantum sensing due to their remarkable optical and spin properties [1]. These defects exhibit stable photoluminescence (PL), long spin coherence times, and high sensitivity to external fields [2]. In this study, we present a room-temperature PL characterization of NV centers excited with a 532 nm laser. The setup was optimized for high signal-to-noise ratio and spectral resolution. Key parameters analyzed include emission intensity, zero-phonon line (ZPL) at ~637 nm, phonon sidebands, and the charge state distribution between NV⁰ and NV⁻. The NV⁻ state, crucial for spin-based sensing, is evaluated to understand its stability under different nitrogen doping conditions [3]. The relative intensities of NV⁰ and NV⁻ provide insights into nitrogen incorporation and vacancy formation. These results contribute to optimizing synthesis conditions for enhanced NV⁻ concentration, supporting the advancement of diamond-based quantum sensing technologies.

•Jan 1, 2025•0 citations

Enhancement of fluorescence from nitrogen-vacancy center ensemble in bulk diamond with broadband antireflection coatings

Lixia Xu, Jixing Zhang, Guodong Bian +5 more

The negatively charged nitrogen-vacancy (NV−) center in diamond is a promising platform for quantum sensing. However, fluorescence from the NV− centers suffers large energy loss at the diamond–air interface. Here, we propose a broadband antireflection coating to enhance the fluorescence intensity by simultaneously reducing the energy loss of the excitation laser and the fluorescence. The reflectance for normal-incidence light decreases from nearly 17% for bared diamond to below 0.33% for coated diamond in the wavelength range 500 nm–800 nm. The reflectance averaged over the fluorescence bandwidth is below 3% for angles of incidence less than 20°. The measured emitted fluorescence for the coated diamond is 1.44 times that of uncoated diamond, corresponding to nearly 20% improvement in the measurement sensitivity. The proposed method is significant for enhancing the signal-to-noise ratio of NV−-based sensors.

AIP Advances•Aug 1, 2020•6 citations

Efficient nitrogen-vacancy centers’ fluorescence excitation and collection from micrometer-sized diamond by a tapered optical fiber in endoscope-type configuration

Dewen Duan, Guanxiang Du, Vinaya K. Kavatamane +4 more

Using an optical fiber to both excite the nitrogen-vacancy (NV) center in diamond and collect its fluorescence is essential to build NV-based endoscope-type sensor. Such endoscope-type sensor can reach inaccessible fields for traditional NV-based sensors built by bulky optical components and extend the application areas. Since single NV's fluorescence is weak and can easily be buried in fluorescence from optical fiber core's oxide defects excited by the green laser, fixing a micrometer size diamond containing high-density NVs rather than a nanodiamond containing single NV or several NVs on the apex of an optical fiber to build an endoscope-type sensor is more implementable. Unfortunately, due to small numerical aperture (NA), most of the optical fibers have a low fluorescence collection efficiency, which limits the sensitivity and spatial resolution of the NV-based endoscope-type sensor. Here, using a tapered optical fiber (TOF) tip, we significantly improve the efficiency of the laser excitation and fluorescence collection of the NV ensembles in diamond. This could potentially enhance the sensitivity and spatial resolution of the NV-based endoscope-type sensor. Numerical calculations show that the TOF tip delivers a high NA and has a high NV excitation and fluorescence collection efficiency. Experiments demonstrate that such TOF tip can obtain up to over 7-fold excitation efficiency and over 15-fold fluorescence collection efficiency of that from a flat-ended fiber (non-TOF) tip.

arXiv:1810.03320•Optics Express•Feb 22, 2019•56 citations

Optical and Spin Properties of NV Center Ensembles in Diamond Nano-Pillars

Kseniia Volkova, Julia Heupel, Sergei D. Trofimov +10 more

Nitrogen-vacancy (NV) color centers in diamond are excellent quantum sensors possessing high sensitivity and nano-scale spatial resolution. Their integration in photonic structures is often desired, since it leads to an increased photon emission and also allows the realization of solid-state quantum technology architectures. Here, we report the fabrication of diamond nano-pillars with diameters up to 1000 nm by electron beam lithography and inductively coupled plasma reactive ion etching in nitrogen-rich diamonds (type Ib) with [100] and [111] crystal orientations. The NV centers were created by keV-He ion bombardment and subsequent annealing, and we estimate an average number of NVs per pillar to be 4300 ± 300 and 520 ± 120 for the [100] and [111] samples, respectively. Lifetime measurements of the NVs’ excited state showed two time constants with average values of τ1 ≈ 2 ns and τ2 ≈ 8 ns, which are shorter as compared to a single color center in a bulk crystal (τ ≈ 10 ns). This is probably due to a coupling between the NVs as well as due to interaction with bombardment-induced defects and substitutional nitrogen (P1 centers). Optically detected magnetic resonance measurements revealed a contrast of about 5% and average coherence and relaxation times of T2 [100] = 420 ± 40 ns, T2 [111] = 560 ± 50 ns, and T1 [100] = 162 ± 11 μs, T1 [111] = 174 ± 24 μs. These pillars could find an application for scanning probe magnetic field imaging.

Nanomaterials•Apr 29, 2022•24 citations

A single photon source based on NV centers in diamond nanocrystals

Juliane Bahe, Xiaoqing Zhou, Tobias Jan Kippenberg +4 more

The development of reliable devices to generate single photons is crucial for applications in quantum cryptography, as well as for fundamental quantum optics experiments. Due to their extremely high photostability at room temperature, optically active defects in solids, the so called color centers, are among the most promising candidates. Single NV (nitrogen-vacancy) centers in diamond have been demonstrated to be able to generate single photons and have already shown advantages compared to attenuated laser pulses in a quantum cryptography experiment. The nitrogen-vacancy center (NV center) in diamond consists of a substitutional nitrogen atom and an adjacent vacancy. This complex exhibits an optical transition with a fluorescence lifetime of 11.6 ns. The room temperature spectrum of the NV center consists of the zero-phonon line at 637 nm and broad phononic sidebands with a FWHM of more than 100 nm. Due to the existence of a shelving level the efficiency of the NV center as a single photon source is limited. Additionally, the high diffraction index of bulk diamond restricts the efficiency to collect the fluorescence light.

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•Jun 1, 2009•4 citations
Nitrogen-vacancy (NV) color centers in diamond are a promising solid-state quantum sensing platform, but their fluorescence collection is severely constrained by the high refractive index of diamond ([Formula: see text]), which causes strong total internal reflection at the diamond-air interface and limits the signal-to-noise ratio for practical applications. Here we report the fluorescence response of a tapered optical-fiber probe comprising a CVD-grown nitrogen-doped polycrystalline diamond film and self-assembled silver nanoparticles (Ag NPs). A large-angle tapered tip ([Formula: see text]20[Formula: see text], [Formula: see text]370[Formula: see text][Formula: see text]m long) is fabricated by hydrofluoric-acid wet etching; an in situ nitrogen-doped diamond thin film is grown by microwave plasma CVD; and a 15[Formula: see text]nm Ag film is deposited by sputtering and annealed at 350[Formula: see text]C for 10[Formula: see text]min to dewet into a dense array of Ag NPs. A fused-silica witness sample prepared under the same Ag deposition and annealing conditions exhibits a broad absorption band that covers the 532[Formula: see text]nm excitation line and extends through the 637[Formula: see text]nm zero-phonon line into the NV emission region. Steady-state photoluminescence measurements show an approximately 1.51-fold increase in the detected NV fluorescence intensity at 637[Formula: see text]nm after Ag-NP processing. Time-correlated single-photon counting reveals that the intensity-weighted mean fluorescence lifetime changes from [Formula: see text][Formula: see text]ns (bare diamond) to 9.48[Formula: see text]±[Formula: see text]0.86[Formula: see text]ns (Ag NPs/diamond) across eight independent probes, corresponding to a lifetime-derived total decay-rate enhancement factor [Formula: see text]. Together, the paired measurements show increased detected brightness and faster total decay; however, the radiative and non-radiative contributions remain unresolved, which prohibits exclusive attribution of the observed variations to plasmonic NP effects. The fabrication route provides a fiber-integrated platform for further optical characterization.
Precise detection of surface plasmons is crucial for the research of nanophotonics and quantum optics. In this Letter, we used a single nitrogen vacancy center in diamond as a probe to detect the surface plasmon that was tuned by the thickness of a metallic film. The fluorescence intensity and lifetime of the nitrogen vacancy (NV) center were measured to obtain the information of local light-matter interaction. A nonlinear thickness dependent change of the surface plasmon was observed, with the maximum at the thickness of approximately 30 nm. With optimized thickness of silver film, the fluorescence intensity of a single NV center was enhanced 2.6 times, and the lifetime was reduced by a factor of 3, without affecting the coherence time of the NV spin state. The results proved that this system can quantitatively detect the light-matter interaction at nanoscale, and it provides an approach to enhance the fluorescence intensity of a quantum emitter.
Nitrogen-vacancy (NV) centers in single-crystal CVD diamond are promising candidates for quantum sensing due to their remarkable optical and spin properties [1]. These defects exhibit stable photoluminescence (PL), long spin coherence times, and high sensitivity to external fields [2]. In this study, we present a room-temperature PL characterization of NV centers excited with a 532 nm laser. The setup was optimized for high signal-to-noise ratio and spectral resolution. Key parameters analyzed include emission intensity, zero-phonon line (ZPL) at ~637 nm, phonon sidebands, and the charge state distribution between NV⁰ and NV⁻. The NV⁻ state, crucial for spin-based sensing, is evaluated to understand its stability under different nitrogen doping conditions [3]. The relative intensities of NV⁰ and NV⁻ provide insights into nitrogen incorporation and vacancy formation. These results contribute to optimizing synthesis conditions for enhanced NV⁻ concentration, supporting the advancement of diamond-based quantum sensing technologies.
The negatively charged nitrogen-vacancy (NV−) center in diamond is a promising platform for quantum sensing. However, fluorescence from the NV− centers suffers large energy loss at the diamond–air interface. Here, we propose a broadband antireflection coating to enhance the fluorescence intensity by simultaneously reducing the energy loss of the excitation laser and the fluorescence. The reflectance for normal-incidence light decreases from nearly 17% for bared diamond to below 0.33% for coated diamond in the wavelength range 500 nm–800 nm. The reflectance averaged over the fluorescence bandwidth is below 3% for angles of incidence less than 20°. The measured emitted fluorescence for the coated diamond is 1.44 times that of uncoated diamond, corresponding to nearly 20% improvement in the measurement sensitivity. The proposed method is significant for enhancing the signal-to-noise ratio of NV−-based sensors.
Using an optical fiber to both excite the nitrogen-vacancy (NV) center in diamond and collect its fluorescence is essential to build NV-based endoscope-type sensor. Such endoscope-type sensor can reach inaccessible fields for traditional NV-based sensors built by bulky optical components and extend the application areas. Since single NV's fluorescence is weak and can easily be buried in fluorescence from optical fiber core's oxide defects excited by the green laser, fixing a micrometer size diamond containing high-density NVs rather than a nanodiamond containing single NV or several NVs on the apex of an optical fiber to build an endoscope-type sensor is more implementable. Unfortunately, due to small numerical aperture (NA), most of the optical fibers have a low fluorescence collection efficiency, which limits the sensitivity and spatial resolution of the NV-based endoscope-type sensor. Here, using a tapered optical fiber (TOF) tip, we significantly improve the efficiency of the laser excitation and fluorescence collection of the NV ensembles in diamond. This could potentially enhance the sensitivity and spatial resolution of the NV-based endoscope-type sensor. Numerical calculations show that the TOF tip delivers a high NA and has a high NV excitation and fluorescence collection efficiency. Experiments demonstrate that such TOF tip can obtain up to over 7-fold excitation efficiency and over 15-fold fluorescence collection efficiency of that from a flat-ended fiber (non-TOF) tip.
Nitrogen-vacancy (NV) color centers in diamond are excellent quantum sensors possessing high sensitivity and nano-scale spatial resolution. Their integration in photonic structures is often desired, since it leads to an increased photon emission and also allows the realization of solid-state quantum technology architectures. Here, we report the fabrication of diamond nano-pillars with diameters up to 1000 nm by electron beam lithography and inductively coupled plasma reactive ion etching in nitrogen-rich diamonds (type Ib) with [100] and [111] crystal orientations. The NV centers were created by keV-He ion bombardment and subsequent annealing, and we estimate an average number of NVs per pillar to be 4300 ± 300 and 520 ± 120 for the [100] and [111] samples, respectively. Lifetime measurements of the NVs’ excited state showed two time constants with average values of τ1 ≈ 2 ns and τ2 ≈ 8 ns, which are shorter as compared to a single color center in a bulk crystal (τ ≈ 10 ns). This is probably due to a coupling between the NVs as well as due to interaction with bombardment-induced defects and substitutional nitrogen (P1 centers). Optically detected magnetic resonance measurements revealed a contrast of about 5% and average coherence and relaxation times of T2 [100] = 420 ± 40 ns, T2 [111] = 560 ± 50 ns, and T1 [100] = 162 ± 11 μs, T1 [111] = 174 ± 24 μs. These pillars could find an application for scanning probe magnetic field imaging.
The development of reliable devices to generate single photons is crucial for applications in quantum cryptography, as well as for fundamental quantum optics experiments. Due to their extremely high photostability at room temperature, optically active defects in solids, the so called color centers, are among the most promising candidates. Single NV (nitrogen-vacancy) centers in diamond have been demonstrated to be able to generate single photons and have already shown advantages compared to attenuated laser pulses in a quantum cryptography experiment. The nitrogen-vacancy center (NV center) in diamond consists of a substitutional nitrogen atom and an adjacent vacancy. This complex exhibits an optical transition with a fluorescence lifetime of 11.6 ns. The room temperature spectrum of the NV center consists of the zero-phonon line at 637 nm and broad phononic sidebands with a FWHM of more than 100 nm. Due to the existence of a shelving level the efficiency of the NV center as a single photon source is limited. Additionally, the high diffraction index of bulk diamond restricts the efficiency to collect the fluorescence light.