The performance and coherence of superconducting quantum systems are fundamentally tied to the quality of the materials from which they are built. In superconducting transmon qubits, many loss mechanisms and sources of decoherence originate from material imperfections or unwanted oxide formation. Likewise, semiconductor–superconductor hybrid systems depend on high-quality interfaces to ensure strong coupling between electronic states in the two materials. In such hybrid devices, the accessible operating regime is often dictated by the intrinsic material properties of either the semiconductor or the superconductor. Advancing quantum device performance therefore requires exploring new material systems and optimizing their physical characteristics. In this thesis, we present the development of several superconducting material platforms for quantum technologies, including superconducting qubits, single-photon detectors, and semiconductor superconductor hybrid devices. We focus on the growth and characterization of superconducting films and heterostructures, and we establish clear connections between their material properties and the resulting device performance. First, we will present a novel semiconductor-superconductor hybrid material based on in-situ deposited epitaxial layers of Nb and Al on a shallow InAs quantum well. In this structure, the Al interlayer provides an epitaxial connection between an in-situ magnetron sputtered Nb or NbTi thin film and a shallow InAs two dimensional electron gas. This metal-to-metal epitaxy is achieved by optimization of the material stack and results in an induced superconducting gap of approximately 1 meV, determined from transport measurements of superconductor semiconductor Josephson junctions. This induced gap is approximately five times larger than the values reported for Al-based hybrid materials and indicates the formation of highly-transparent interfaces that are required in high-quality hybrid material platforms. Then, we discuss a different approach in the next chapter where we develop a hybrid material based on a molecular beam epitaxy grown InAsSb surface quantum well with an in-situ deposited Nb layer directly on top of the quantum well. Relative to conventional Al-InAs based systems, the InAsSb surface quantum well offers a lower effective mass and stronger spin-orbit interaction, while the Nb layer has a higher critical temperature and a larger critical magnetic field. The in-situ deposition of the Nb layer directly on top of the quantum well results in a high-quality interface that enables strong coupling to the InAsSb quantum well. Transport measurements on Josephson junctions reveal an induced superconducting gap of 1.3 meV and a critical current density of 3.75 × 10³A/cm². Furthermore, a planar asymmetric SQUID is realized, exhibiting gate-tunable superimposed oscillations originating from both the individual Josephson junction and the full SQUID loop. The large induced superconducting gap combined with strong spin-orbit interaction position this material as an attractive platform for experiments exploring gate-tunable superconductivity and topological superconducting devices. In the next chapter, we will focus on establishing a link between Nb film crystal properties and their performance in superconducting circuits. In this study, we investigate the microwave properties of niobium resonators with different crystalline properties and related surface topographies. We analyze a series of magnetron sputtered films in which the Nb crystal orientation and surface topography are changed by varying the substrate temperatures between room temperature and 975 K. The lowest-loss resonators that we measure have quality factors of over 10⁶ at single-photon powers, among the best ever recorded using the Nb on sapphire platform. We observe the highest quality factors in films grown at an intermediate temperature regime of the growth series (550 K) where the films display both preferential ordering of the crystal domains and low surface roughness. Furthermore, we analyze the temperature-dependent behavior of our resonators to learn about how the quasi-particle density in the Nb film is affected by the niobium crystal structure and the presence of grain boundaries. Then, we explore yet a different material platform by attempting to realize onchip NbTiN single photon detectors on LiNbO₃, an emerging photonic platform with high potential for scalable quantum information processing. We use DC reactive magnetron sputtering to grow high-quality NbTiN thin films and investigate the impact of substrate temperature during NbTiN growth. We achieve four nm thick superconducting films with a critical temperature (𝑇𝑐) of 12.3 K grown at a substrate temperature of 825 K. We demonstrate that the increased substrate temperature reduces the oxygen concentration in our films and improves the overall stoichiometry. In addition, we integrate these films with the LiNbO3 platform and investigate the obtained interface quality. Finally, we fabricate superconducting nanowire single photon detectors from the NbTiN film on LiNbO₃ and characterize the detector performance. Lastly, we report a gate-tunable Josephson diode effect in hybrid nanowire junctions consisting of a spin-orbit-coupled semiconductor core coated with epitaxial ferromagnetic insulator and superconductor shells. The wires display a hysteretic superconducting window as a function of axial magnetic field. In the superconducting regime, the devices exhibit nonreciprocal current transport, with the diode efficiency showing a strong dependence on back-gate voltage. The effect persists in a remanent magnetization state following a controlled demagnetization procedure, establishing zero-field operation. The combination of results presented in this thesis stress the importance of a material-focused approach in advancing the performance of quantum hardware. The novel hybrid material platforms developed in this thesis expand the operating regime of devices, which could enable future experiments involving gate-tunable superconductivity or topological properties. Similarly, we demonstrate that optimizing superconductor crystal structure benefits quantum devices, such as single-photon detectors and superconducting resonators.
The performance and coherence of superconducting quantum systems are fundamentally tied to the quality of the materials from which they are built. In superconducting transmon qubits, many loss mechanisms and sources of decoherence originate from material imperfections or unwanted oxide formation. Likewise, semiconductor–superconductor hybrid systems depend on high-quality interfaces to ensure strong coupling between electronic states in the two materials. In such hybrid devices, the accessible operating regime is often dictated by the intrinsic material properties of either the semiconductor or the superconductor. Advancing quantum device performance therefore requires exploring new material systems and optimizing their physical characteristics. In this thesis, we present the development of several superconducting material platforms for quantum technologies, including superconducting qubits, single-photon detectors, and semiconductor superconductor hybrid devices. We focus on the growth and characterization of superconducting films and heterostructures, and we establish clear connections between their material properties and the resulting device performance. First, we will present a novel semiconductor-superconductor hybrid material based on in-situ deposited epitaxial layers of Nb and Al on a shallow InAs quantum well. In this structure, the Al interlayer provides an epitaxial connection between an in-situ magnetron sputtered Nb or NbTi thin film and a shallow InAs two dimensional electron gas. This metal-to-metal epitaxy is achieved by optimization of the material stack and results in an induced superconducting gap of approximately 1 meV, determined from transport measurements of superconductor semiconductor Josephson junctions. This induced gap is approximately five times larger than the values reported for Al-based hybrid materials and indicates the formation of highly-transparent interfaces that are required in high-quality hybrid material platforms. Then, we discuss a different approach in the next chapter where we develop a hybrid material based on a molecular beam epitaxy grown InAsSb surface quantum well with an in-situ deposited Nb layer directly on top of the quantum well. Relative to conventional Al-InAs based systems, the InAsSb surface quantum well offers a lower effective mass and stronger spin-orbit interaction, while the Nb layer has a higher critical temperature and a larger critical magnetic field. The in-situ deposition of the Nb layer directly on top of the quantum well results in a high-quality interface that enables strong coupling to the InAsSb quantum well. Transport measurements on Josephson junctions reveal an induced superconducting gap of 1.3 meV and a critical current density of 3.75 × 10³A/cm². Furthermore, a planar asymmetric SQUID is realized, exhibiting gate-tunable superimposed oscillations originating from both the individual Josephson junction and the full SQUID loop. The large induced superconducting gap combined with strong spin-orbit interaction position this material as an attractive platform for experiments exploring gate-tunable superconductivity and topological superconducting devices. In the next chapter, we will focus on establishing a link between Nb film crystal properties and their performance in superconducting circuits. In this study, we investigate the microwave properties of niobium resonators with different crystalline properties and related surface topographies. We analyze a series of magnetron sputtered films in which the Nb crystal orientation and surface topography are changed by varying the substrate temperatures between room temperature and 975 K. The lowest-loss resonators that we measure have quality factors of over 10⁶ at single-photon powers, among the best ever recorded using the Nb on sapphire platform. We observe the highest quality factors in films grown at an intermediate temperature regime of the growth series (550 K) where the films display both preferential ordering of the crystal domains and low surface roughness. Furthermore, we analyze the temperature-dependent behavior of our resonators to learn about how the quasi-particle density in the Nb film is affected by the niobium crystal structure and the presence of grain boundaries. Then, we explore yet a different material platform by attempting to realize onchip NbTiN single photon detectors on LiNbO₃, an emerging photonic platform with high potential for scalable quantum information processing. We use DC reactive magnetron sputtering to grow high-quality NbTiN thin films and investigate the impact of substrate temperature during NbTiN growth. We achieve four nm thick superconducting films with a critical temperature (𝑇𝑐) of 12.3 K grown at a substrate temperature of 825 K. We demonstrate that the increased substrate temperature reduces the oxygen concentration in our films and improves the overall stoichiometry. In addition, we integrate these films with the LiNbO3 platform and investigate the obtained interface quality. Finally, we fabricate superconducting nanowire single photon detectors from the NbTiN film on LiNbO₃ and characterize the detector performance. Lastly, we report a gate-tunable Josephson diode effect in hybrid nanowire junctions consisting of a spin-orbit-coupled semiconductor core coated with epitaxial ferromagnetic insulator and superconductor shells. The wires display a hysteretic superconducting window as a function of axial magnetic field. In the superconducting regime, the devices exhibit nonreciprocal current transport, with the diode efficiency showing a strong dependence on back-gate voltage. The effect persists in a remanent magnetization state following a controlled demagnetization procedure, establishing zero-field operation. The combination of results presented in this thesis stress the importance of a material-focused approach in advancing the performance of quantum hardware. The novel hybrid material platforms developed in this thesis expand the operating regime of devices, which could enable future experiments involving gate-tunable superconductivity or topological properties. Similarly, we demonstrate that optimizing superconductor crystal structure benefits quantum devices, such as single-photon detectors and superconducting resonators.
Superconducting qubit based on superconducting circuits consist of a superconducting capacitor and a Josephson junction with the transmon geometry is extensively used in advanced quantum processors, pursuing scalable quantum computing. The tuning of the qubit frequency of the transmon relies on magnetic flux-dependent interference between the supercurrents of two superconductor-insulator-superconductor (S-I-S) Josephson junctions in a superconducting loop. Josephson junction based on superconductor-semiconductor-superconductor (S-Sm-S) materials opens up a possibility to the gate-tunable transmon, referred to as the "gatemon", in which the qubit frequency can be tuned by electrostatic mean. Recent realizations of gatemons on III-V material platforms show impressive development on the alternative to the transmon, yet still leave a big question on the scalability. The silicon-germanium (SiGe) heterostructure is one of the potential platforms to host hybrid devices due to its high hole mobility and the low Schottky barrier at the Ge-metal interface. Additionally, the compatibility with the silicon-based semiconductor industry is a capable advantage for the scaling-up qubit platform.In this thesis, we develop gatemons based on the Al-Ge-Al Josephson junction in the SiGe heterostructure. Firstly, the robust fabrication recipe, found on a top-down approach, for Josephson Field Effect Transistors (JoFETs) is established. We perform measurements exhaustively on the JoFETs to study their properties as a function of the gate voltage, temperature, and magnetic field. The devices show gate-tunability of the critical current and the normal state resistance . The devices are estimated to have a high-transparency superconductor-semiconductor interface, as demonstrated by the high product on the SiGe heterostructure. In the finite-voltage regime, the features corresponded to multiple Andreev reflections (MARs) are observed. Then, we fabricate and characterize niobium nitride (NbN) superconducting resonators on SiGe heterostructure. We measure the resonators in the transmission mode and extract the resonant frequency , internal quality factor, and coupling quality factor from the transmission coefficient. Following that, we develop the fabrication process to integrate Al-Ge-Al junctions shunted with capacitors, or, in other words, gatemon, into the resonator scheme and perform the fabrication according to the design. We demonstrate the anticrossing feature in one of the fabricated gatemons. The resonant frequency of the gatemon is mapped using the two-tone spectroscopy technique and is found to be gate-tunable. The qubit has large spectral linewidth, implying a low coherence time. Additionally, we conduct the current-phase relationship (CPR) measurement on the junctions in the Superconducting QUantum Interference Device (SQUID) geometry. We can demonstrate that the junctions pose non-sinusoidal CPR. Further, the integer and half-integer Shapiro steps are observed in the current-voltage characteristic curves of irradiated junctions. This indicates that our junctions have the element, which can open up another possibility toward protected qubits.
Superconducting qubit based on superconducting circuits consist of a superconducting capacitor and a Josephson junction with the transmon geometry is extensively used in advanced quantum processors, pursuing scalable quantum computing. The tuning of the qubit frequency of the transmon relies on magnetic flux dependent interference between the supercurrents of two superconductor-insulator superconductor(S-I-S) Josephson junctions in a superconducting loop. Josephson junction based on superconductor-semiconductor-superconductor (S-Sm-S) materialsopens up a possibility to the gate-tunable transmon, referred to as the "gatemon", in which the qubit frequency can be tuned by electrostatic mean. Recent realizations of gatemons on III-V material platforms show impressive development on the alternative to the transmon, yet still leave a big question on the scalability. The silicon-germanium (SiGe) heterostructure is one of the potential platforms to host hybrid devices due to its high hole mobility and the low Schottky barrier at the Ge-metal interface. Additionally, the compatibility with the silicon-based semiconductor industry is a capable advantage for the scaling-up qubit platform.In this thesis, we develop gatemons based on the Al-Ge-Al Josephson junction in the SiGe heterostructure. Firstly, the robust fabrication recipe, found on a top down approach, for Josephson Field Effect Transistors (JoFETs) is established. We perform measurements exhaustively on the JoFETs to study their properties as a function of the gate voltage, temperature, and magnetic field. The devices show gate-tunability of the critical current (IC) and the normal state resistance (RN). The devices are estimated to have a high-transparency superconductor/semiconductor interface, as demonstrated by the high ICRN product on the SiGe heterostructure. In the finite-voltage regime, the features corresponded to multiple Andreev reflections (MARs) are observed. Then, we fabricate and characterize niobium nitride (NbN) superconducting resonators on SiGe heterostructure. We measure the resonators in the transmission mode and extract the resonant frequency (fr), internal quality factor (Qi), and coupling quality factor (Qc) from the transmission coefficient (S21). Following that, we develop the fabrication process to integrate Al-Ge-Al junctions shunted with capacitors, or, in other words,gatemon, into the resonator scheme and perform the fabrication according to the design. We demonstrate the anticrossing feature in one of the fabricated gatemons. The resonant frequency of the gatemon is mapped using the two-tone spectroscopy technique and is found to be gate-tunable. The qubit has large spectral linewidth, implying a low coherence time. Additionally, we conduct the current-phase relationship (CPR) measurement on the junctions in the Superconducting QUantum Interference Device (SQUID) geometry. We can demonstrate that the junctions pose non-sinusoidal CPR. Further, the integer and half-integer Shapiro steps are observed in the current-voltage characteristic curves of irradiated junctions. This indicates that our junctions have the cos 2φ element, which can open up another possibility toward protected qubits.
Abstract The quest for a universal quantum computer has renewed interest in the growth of superconducting materials on semiconductor substrates. High-quality superconducting thin films will make it possible to improve the coherence time of superconducting quantum bits (qubits), i.e., to extend the time a qubit can store the amplitude and phase of a quantum state. The electrical losses in superconducting qubits highly depend on the quality of the metal layers the qubits are made from. Here, we report on the epitaxy of single-crystal Al (011) layers on GaAs (001) substrates. Layers with 110 nm thickness were deposited by means of molecular beam epitaxy at low temperature and monitored by in situ reflection high-energy electron diffraction performed simultaneously at four azimuths. The single-crystal nature of the layers was confirmed by ex situ high-resolution x-ray diffraction. Differential interference contrast and atomic force microscopy analysis of the sample’s surface revealed a featureless surface with root mean square roughness of 0.55 nm. A detailed in situ study allowed us to gain insight into the nucleation mechanisms of Al layers on GaAs, highlighting the importance of GaAs surface reconstruction in determining the final Al layer crystallographic orientation and quality. A highly uniform and stable GaAs (001)- ( 2 × 4 ) reconstruction reproducibly led to a pure Al (011) phase, while an arsenic-rich GaAs (001)- ( 4 × 4 ) reconstruction yielded polycrystalline films with an Al (111) dominant orientation. The near-atomic smoothness and single-crystal character of Al films on GaAs, in combination with the ability to trench GaAs substrates, could set a new standard for the fabrication of superconducting qubits.
As the field of superconducting quantum technology progresses beyond single-qubit control, scalable and multifunctional quantum architectures become increasingly vital. A central challenge is integrating fast, controllable superconducting circuits with components that offer longer coherence, richer physics, or new functionalities. Hybrid quantum systems, where superconducting microwave resonators interface with semiconducting or magnetic subsystems, have the capabilities to fulfil this need, yet they face significant engineering obstacles. Conventional superconducting resonator designs struggle under magnetic field biasing and electrostatic gating, both of which are essential for coupling to spin-based, semiconductor, or magnonic elements.This thesis explores solutions to these bottlenecks through the development of magnetic-field-resilient coplanar stripline (CPS) resonators based on thin-film NbTiN. These resonators retain a stable resonance frequency in in-plane magnetic fields up to 1T, can have high kinetic inductance and offer broad geometrical tunability, enabling strong and ultrastrong coupling to charge- and spin-based quantum systems. In the superconducting–semiconductor domain, we demonstrate high-impedance CPS resonators inductively coupled to Josephson junctions hosting Andreev bound states (ABSs), revealing both coherent pair transitions and single-quasiparticle excitations near the ultrastrong coupling regime. This opens the door to fast, gate-tunable qubits based on microscopic ABSs, distinct from conventional macroscopic qubit architectures, and lays the groundwork for spin–photon hybridisation, non-perturbative light–matter interactions, and parity-based quantum logic.In parallel, this work investigates rare-earth iron garnet (ReIG) ferrimagnetic insulators as low-loss spin-wave media compatible with superconducting devices. In sputtered thin-film thulium iron garnet (TmIG) with perpendicular magnetic anisotropy, we observe deterministic spin-orbit torque switching and multiple magnetisation polarity reversals. These properties showcase the attractiveness of TmIG both for low-dissipation magnonic information transport and as magnetic interfaces for superconducting hybrid devices. Taken together, the results of this thesis establish materials, device concepts, and measurement strategies for novel classes of hybrid quantum systems that combine robust superconducting circuitry, electrostatically tunable semiconductor excitations, and industry-scalable magnetic elements and pave the way for next-generation hybrid quantum systems. More broadly, they provide concrete routes to overcoming limitations of existing hybrid platforms and advance the development of versatile, low-dissipation quantum technologies.
Developing alternative material platforms for use in superconductor–semiconductor hybrid structures is desirable due to limitations caused by intrinsic microwave losses present in commonly used III/V material systems. With the recent reports on tantalum superconducting qubits that show improvements over the Nb and Al counterparts, exploring Ta the superconductor in hybrid material systems is promising. Here, we study the growth of Ta on semiconducting Ge (001) substrates grown via molecular beam epitaxy. We show that at a growth temperature of 400 °C, the Ta diffuses into the Ge matrix in a self-limiting nature resulting in smooth and abrupt surfaces and interfaces with roughness on the order of 3–7 Å as measured by atomic force microscopy and x-ray reflectivity. The films are found to be a mixture of Ta5Ge3 and TaGe2 binary alloys and form a native oxide that seems to form a sharp interface with the underlying film. These films are superconducting with a TC∼1.8−2 K and HC⊥∼1.88 T, HC∥∼5.1 T. These results show this tantalum germanide film to be promising for future superconducting quantum information platforms.
ABSTRACT Niobium (Nb) films have emerged as a crucial material in the development of superconducting qubits, which are key components in quantum computing technology. This review provides a comprehensive examination of Nb films from a materials perspective, focusing on their intrinsic properties, fabrication methods/techniques, and their influence on qubit performance, particularly through surface and interface driven loss mechanisms. We discuss the key material properties that are essential for qubit operation. Various deposition techniques for Nb thin films, such as sputtering, evaporation, molecular beam epitaxy, and atomic layer deposition, are explored, alongside their impact on film quality, uniformity, and qubit performance. Additionally, the influence of surface roughness, thin‐film thickness, and substrate materials on quantum coherence is analyzed. Challenges such as defects and material degradation in Nb films are reviewed, along with strategies to mitigate these issues. Finally, we present the latest advancements and future directions in Nb film research, including potential improvements to enhance qubit coherence and scalability for large‐scale quantum computing systems. Ultimately, a deeper understanding of surface and interface phenomena is essential for pushing the limits of qubit performance and realizing next‐generation quantum technologies.