Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

ダイヤモンドナノビームとテーパードファイバーを用いた 分光特性評価に関する研究

青山慶太朗, 関口雄平, 鎌田幹也, 羽中田祥司, 国井昌樹, 岳正 玉貫, 石田悟己, 松清秀次, ポンセン ナタチャック, Masao Nishioka, 池尙玟, 秀夫 大槻, 木村 晃介, 竹中 康太, 忍 小野田, Toshihiko Baba, 岩本 敏, 小坂英男

Published Mar 18, 2026• 0 citations
OpenAlex

Abstract

量子デバイスと光ファイバー間の効率的で安定したインターフェースは、大規模量子ネットワークと分散型量子コンピューティングを実現するための重要な要件である.とくに,量子ネットワークノードとして有望なダイヤモンド色中心では,発光効率の向上を目的として,ダイヤモンドナノビーム構造にフォトニック結晶共振器を作製する方式が有力視されている.本研究では,テーパードダイヤモンドナノビームとテーパードファイバーを用いた断熱結合によって,広帯域で効率的かつ堅牢な光結合を実現することを目指した[*].実験に用いたテーパードファイバーは,フッ化水素酸エッチングプロセスにより開口角<3°,先端径<150 nm を目標に作製した. FDTD シミュレーションから,この構造により最大 98%の光結合効率が得られることが見積もられた.実験では,テーパードダイヤモンドナノビーム内にスズ空孔(SnV)中心を形成し,緑色レーザー励起によるフォトルミネッセンス(PL)から光結合を評価した.テーパードファイバーをナノビームに接触させ,微小位置合わせを行うことで,光ファイバーから SnV 中心の PL を検出することに成功した.一方で,実験で得られた効率は理論値より低く,これはデバイスの物理形状の不完全性に起因すると考えられる.今後は,製造プロセスの最適化とともに,安定に動作するパッケージ化デバイスの実現を目標とする.

Related papers

ダイヤモンドSnV中心を用いた電気機械結合によるマイクロ波–光インターフェイス

関口雄平, ナースィル アブドゥル, 黒川穂高 +16 more

近年、超伝導量子ビットに代表される光に直接結合しない量子デバイスを光量子系と接続するため、ダイヤモンド中の色中心をマイクロ波光子と光学光子の量子インターフェイスとして用いる試みが注目されている。マイクロ波光子は熱雑音の影響を強く受けるため、極低温下での動作を前提に、低いポンプ光強度での動作が重要となる。我々は、色中心をオプトメカニカル結晶中に配置する手法を提案し、理論計算により低ポンプ動作に向けて有望であることを示した。一方で、ダイヤモンドは圧電性を持たないため、機械モード励起に圧電材料を用いると、プロセスの複雑化や損失増加を招く可能性がある。そこで本研究では、圧電材料を用いずに静電力で機械モードの励起を試みた。実験では、SiN 光導波上のダイヤモンドナノフォトニック構造中の単一SnV中心を用いて、約 1.8 GHz の機械共鳴に対応する光学遷移のサイドバンドを観測した。さらに、2 経路同時のサイドバンド遷移によりマイクロ波と光の位相に依存した干渉が確認され、両者が機械モードを介して結合していることが示唆された。本成果は、ダイヤモンド色中心を用いた低雑音量子トランスデューサ実現に向けた基盤的ステップである。

•Mar 18, 2026•0 citations

Single tin-vacancy center in nanoscale diamond

Masanori Fujiwara, Masanao Ohori, Frederick T.-K. So +6 more

Group-IV color centers in diamonds are promising not only as spin-photon interfaces for quantum networks but also as multicolor photoluminescence probes and all-optical temperature sensors for biological research. Therefore, generating group-IV color centers in detonation nanodiamonds (DNDs), the smallest class of diamond nanocrystals, has become a research focal point. This approach holds potential for the noninvasive introduction of diamond sensors into living cell organelles, enabling sensing of local structural and temperature changes with minimal disturbance. Following the successful generation of silicon- and germanium-vacancy centers in DNDs, the generation of tin-vacancy (SnV) centers was investigated. Similar to other group-IV color centers, the SnV centers exhibit strong photoluminescence. In addition, the SnV center offers a long spin coherence time compared with those of silicon- and germanium-vacancy centers. However, the strain induced by large Sn atoms poses substantial challenges for generating SnV centers in ultrasmall nanodiamonds. In this study, Sn-doped DNDs with a mean particle size of ~ 5 nm were subjected to a 3 days boiling acid treatment, which led to sharp zero-phonon lines of SnV centers at ~ 620 nm in the photoluminescence spectra. Photon autocorrelation measurements further revealed the presence of single SnV centers in these DNDs.

Discover Nano•May 14, 2025•9 citations

基于PPLN波导的弱光频率转换与噪声分析

Kong Zhang, 李志秀 Zhixiu LI

本文基于周期极化铌酸锂波导进行了852 nm与通信波段的弱光频率转换,分析了不同转换方案中的噪声问题,并通过改变输出光子的偏振状态,使得信噪比大幅提高,还分析了滤波器带宽与信噪比的关系,实验结果表明,在使用带宽为0.3 nm的光纤布拉格光栅和带宽为12 nm的带通滤波器后,信噪比达到91.3。接着我们对转换前后的光子波包进行了表征,从而证明量子频率转换并不会改变信号光波形,最终将优化后的磁光阱系统与频率转换装置连接,以期实现量子频率转换,为后续混合量子网络的建立提供重要基础。

Acta Sinica Quantum Optica•Jan 1, 2025•0 citations

Fabrication and Photoluminescence Studies of Tin-Vacancy Centers in Chemical Vapor Deposition Diamond

Rani Mary Joy, Miquel Cherta Garrido, Omar J. Y. Harb +8 more

Group IV color centers in diamond are promising single-photon emitters for quantum information processing and networking. Among them, the tin-vacancy (SnV) center stands out due to its long spin coherence times at cryogenic temperatures above 1 K. While SnV centers have been realized using various fabrication routes, their in situ formation via microwave plasma-enhanced chemical vapor deposition (MW PE CVD) remains relatively unexplored. In this study, SnV centers, identified by a zero-phonon line (ZPL) near 620 nm, were synthesized in nanocrystalline diamond and free-standing microcrystalline diamond using tin oxide (SnO 2 ) as a dopant source at substrate temperatures of 750°C and 850°C. Photoluminescence measurements reveal that lowering the substrate temperature enhances both the ZPL intensity and spatial uniformity of SnV centers. These results highlight substrate temperature as a key parameter for controlling SnV incorporation during MW PE CVD growth and provide insights into optimizing fabrication strategies for diamond-based quantum technologies.

ACS Materials Letters•Dec 2, 2025•1 citation

用于冷原子实验的一维折射型光束扫描系统

冯涛 Feng Tao, 杨鹏飞 Yang Pengfei, 范青 Fan Qing +4 more

利用可旋转楔形棱镜(振镜)的光折射效应,实现一维受控的高精度光束扫描系统,并将其用于产生移动的光学偶极阱系统,能够使冷原子在空间内实现大范围绝热转移。光学偶极阱由一束准直的大功率1064 nm激光通过透镜强聚焦形成,其束腰半径为(21.9±0.4) μm。通过设计振镜与透镜之间的距离以及控制振镜的偏转角度,能够使偶极阱束腰在一维方向上实现高精度可控移动,通过设计偶极阱束腰位置移动的加速度形式,能够使偶极阱在22.5 ms内绝热移动7 mm。在平移过程中,光学偶极阱功率起伏为±3.45%,束腰位置在垂直于移动方向上的起伏为共焦参数的±1.7%。利用该系统,可以在30 ms内将原子转移5 mm,原子转移效率大于90.0%,温度变化小于5 μK;当转移时间为45 ms时,原子转移效率达(99.6±4.6)%。通过改善电机响应,最快可在10 ms 内将原子绝热地转移1 mm,原子转移效率为(94.3±3.6)%。该光束扫描系统具有通光孔径大(高斯直径>10 mm)、光损耗极小、噪声低和在移动过程中光频率不变化等优势,能够广泛应用于冷原子及单原子阵列实验中的原子转移和寻址。

Acta Optica Sinica•Jan 1, 2024•1 citation

高性能超导相变边缘单光子探测器(特邀)

李佩展 LI Peizhan, Jiaqiang Zhong, 张文 ZHANG Wen +7 more

研究了钛膜的特性及调控机制,通过烘烤后处理工艺分析了临界温度随烘烤时间和烘烤温度的变化关系,发现临界温度随烘烤时间对数降低,但是随烘烤温度指数降低。拓展了二流体模型提取了超导相变边缘单光子探测器的温度灵敏度系数和电流灵敏度系数,并结合脉冲响应得到了器件的热容,进一步理论计算了能量分辨率对器件临界温度的依存性。最终,在器件制备过程中集成光学腔体,在1 550 nm波长的光子吸收效率接近100%。研制的超导相变边缘单光子探测器系统探测效率超过90%,能量分辨率约为0.5 eV,可分辨至少10个1 550 nm光子,满足快速时变天体的观测需求。

ACTA PHOTONICA SINICA•Jan 1, 2023•1 citation
量子デバイスと光ファイバー間の効率的で安定したインターフェースは、大規模量子ネットワークと分散型量子コンピューティングを実現するための重要な要件である.とくに,量子ネットワークノードとして有望なダイヤモンド色中心では,発光効率の向上を目的として,ダイヤモンドナノビーム構造にフォトニック結晶共振器を作製する方式が有力視されている.本研究では,テーパードダイヤモンドナノビームとテーパードファイバーを用いた断熱結合によって,広帯域で効率的かつ堅牢な光結合を実現することを目指した[*].実験に用いたテーパードファイバーは,フッ化水素酸エッチングプロセスにより開口角<3°,先端径<150 nm を目標に作製した. FDTD シミュレーションから,この構造により最大 98%の光結合効率が得られることが見積もられた.実験では,テーパードダイヤモンドナノビーム内にスズ空孔(SnV)中心を形成し,緑色レーザー励起によるフォトルミネッセンス(PL)から光結合を評価した.テーパードファイバーをナノビームに接触させ,微小位置合わせを行うことで,光ファイバーから SnV 中心の PL を検出することに成功した.一方で,実験で得られた効率は理論値より低く,これはデバイスの物理形状の不完全性に起因すると考えられる.今後は,製造プロセスの最適化とともに,安定に動作するパッケージ化デバイスの実現を目標とする.
近年、超伝導量子ビットに代表される光に直接結合しない量子デバイスを光量子系と接続するため、ダイヤモンド中の色中心をマイクロ波光子と光学光子の量子インターフェイスとして用いる試みが注目されている。マイクロ波光子は熱雑音の影響を強く受けるため、極低温下での動作を前提に、低いポンプ光強度での動作が重要となる。我々は、色中心をオプトメカニカル結晶中に配置する手法を提案し、理論計算により低ポンプ動作に向けて有望であることを示した。一方で、ダイヤモンドは圧電性を持たないため、機械モード励起に圧電材料を用いると、プロセスの複雑化や損失増加を招く可能性がある。そこで本研究では、圧電材料を用いずに静電力で機械モードの励起を試みた。実験では、SiN 光導波上のダイヤモンドナノフォトニック構造中の単一SnV中心を用いて、約 1.8 GHz の機械共鳴に対応する光学遷移のサイドバンドを観測した。さらに、2 経路同時のサイドバンド遷移によりマイクロ波と光の位相に依存した干渉が確認され、両者が機械モードを介して結合していることが示唆された。本成果は、ダイヤモンド色中心を用いた低雑音量子トランスデューサ実現に向けた基盤的ステップである。
Group-IV color centers in diamonds are promising not only as spin-photon interfaces for quantum networks but also as multicolor photoluminescence probes and all-optical temperature sensors for biological research. Therefore, generating group-IV color centers in detonation nanodiamonds (DNDs), the smallest class of diamond nanocrystals, has become a research focal point. This approach holds potential for the noninvasive introduction of diamond sensors into living cell organelles, enabling sensing of local structural and temperature changes with minimal disturbance. Following the successful generation of silicon- and germanium-vacancy centers in DNDs, the generation of tin-vacancy (SnV) centers was investigated. Similar to other group-IV color centers, the SnV centers exhibit strong photoluminescence. In addition, the SnV center offers a long spin coherence time compared with those of silicon- and germanium-vacancy centers. However, the strain induced by large Sn atoms poses substantial challenges for generating SnV centers in ultrasmall nanodiamonds. In this study, Sn-doped DNDs with a mean particle size of ~ 5 nm were subjected to a 3 days boiling acid treatment, which led to sharp zero-phonon lines of SnV centers at ~ 620 nm in the photoluminescence spectra. Photon autocorrelation measurements further revealed the presence of single SnV centers in these DNDs.
本文基于周期极化铌酸锂波导进行了852 nm与通信波段的弱光频率转换,分析了不同转换方案中的噪声问题,并通过改变输出光子的偏振状态,使得信噪比大幅提高,还分析了滤波器带宽与信噪比的关系,实验结果表明,在使用带宽为0.3 nm的光纤布拉格光栅和带宽为12 nm的带通滤波器后,信噪比达到91.3。接着我们对转换前后的光子波包进行了表征,从而证明量子频率转换并不会改变信号光波形,最终将优化后的磁光阱系统与频率转换装置连接,以期实现量子频率转换,为后续混合量子网络的建立提供重要基础。
Group IV color centers in diamond are promising single-photon emitters for quantum information processing and networking. Among them, the tin-vacancy (SnV) center stands out due to its long spin coherence times at cryogenic temperatures above 1 K. While SnV centers have been realized using various fabrication routes, their in situ formation via microwave plasma-enhanced chemical vapor deposition (MW PE CVD) remains relatively unexplored. In this study, SnV centers, identified by a zero-phonon line (ZPL) near 620 nm, were synthesized in nanocrystalline diamond and free-standing microcrystalline diamond using tin oxide (SnO 2 ) as a dopant source at substrate temperatures of 750°C and 850°C. Photoluminescence measurements reveal that lowering the substrate temperature enhances both the ZPL intensity and spatial uniformity of SnV centers. These results highlight substrate temperature as a key parameter for controlling SnV incorporation during MW PE CVD growth and provide insights into optimizing fabrication strategies for diamond-based quantum technologies.
利用可旋转楔形棱镜(振镜)的光折射效应,实现一维受控的高精度光束扫描系统,并将其用于产生移动的光学偶极阱系统,能够使冷原子在空间内实现大范围绝热转移。光学偶极阱由一束准直的大功率1064 nm激光通过透镜强聚焦形成,其束腰半径为(21.9±0.4) μm。通过设计振镜与透镜之间的距离以及控制振镜的偏转角度,能够使偶极阱束腰在一维方向上实现高精度可控移动,通过设计偶极阱束腰位置移动的加速度形式,能够使偶极阱在22.5 ms内绝热移动7 mm。在平移过程中,光学偶极阱功率起伏为±3.45%,束腰位置在垂直于移动方向上的起伏为共焦参数的±1.7%。利用该系统,可以在30 ms内将原子转移5 mm,原子转移效率大于90.0%,温度变化小于5 μK;当转移时间为45 ms时,原子转移效率达(99.6±4.6)%。通过改善电机响应,最快可在10 ms 内将原子绝热地转移1 mm,原子转移效率为(94.3±3.6)%。该光束扫描系统具有通光孔径大(高斯直径>10 mm)、光损耗极小、噪声低和在移动过程中光频率不变化等优势,能够广泛应用于冷原子及单原子阵列实验中的原子转移和寻址。
研究了钛膜的特性及调控机制,通过烘烤后处理工艺分析了临界温度随烘烤时间和烘烤温度的变化关系,发现临界温度随烘烤时间对数降低,但是随烘烤温度指数降低。拓展了二流体模型提取了超导相变边缘单光子探测器的温度灵敏度系数和电流灵敏度系数,并结合脉冲响应得到了器件的热容,进一步理论计算了能量分辨率对器件临界温度的依存性。最终,在器件制备过程中集成光学腔体,在1 550 nm波长的光子吸收效率接近100%。研制的超导相变边缘单光子探测器系统探测效率超过90%,能量分辨率约为0.5 eV,可分辨至少10个1 550 nm光子,满足快速时变天体的观测需求。