Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

International Conference on Intelligent and Sustainable AI Systems (ICOSAAS)

Calibration of Variational Quantum Classifiers Under Depolarizing Noise: Expected Calibration Error, Ansatz Expressibility, and Post-Hoc Temperature Scaling

Souvik Ghosh, Amrita Kundu, Mithaguru, Vegi Fernando A

Published Jul 1, 2026• 0 citations
Publisher

Abstract

Variational Quantum Classifiers (VQCs) have emerged as prime candidates for machine learning on NISQ systems. It stands to reason that the same depolarizing noise that drives quantum states toward the maximally mixed state would also alleviate the overconfidence of VQCs. This paper tests that hypothesis through an empirical study on three datasets at six noise levels, validated across ten random seeds and supported by a formal analysis of how the depolarizing channel contracts the measured logits. The primary finding is that depolarizing noise does not reduce overconfidence in VQCs that remain in the learnable regime: expected calibration error (ECE) never decreases with noise on any dataset, and on the lowest-variance dataset it increases significantly (Wilcoxon signed-rank p < 0.005 over ten seeds). We derive why the optimizer compensates for the channel and confirm the mechanism through a confidence-trajectory experiment. A secondary finding is that a less expressive ansatz can appear well-calibrated only because it collapses to a degenerate solution, demonstrating that ECE must always be reported alongside accuracy. Any effect of noise on accuracy is small and seed-dependent, and it is decoupled from calibration. Post-hoc temperature scaling reduces VQC ECE by 64 to 77 percent across all datasets and is the recommended calibration method for NISQ-era classifiers.

DOI
10.1109/icosaas68663.2026.11648877

Related papers

Performance Analysis of Variational Quantum Classifier and Quantum Kernel SVM under NISQ Noise Models Using Qiskit Aer

Mahadevaswamy, Bhavaling Alias Pratima Khot, S. S. Ittannavar

The rapid advancement of Noisy Intermediate-Scale Quantum (NISQ) devices necessitates a systematic evaluation of quantum machine learning (QML) algorithms to determine their feasibility for near-term applications. This study aims to benchmark the Variational Quantum Classifier (VQC)and the Quantum Kernel Support Vector Machine (QSVM) under realistic noise conditions modeled using Qiskit Aer. The primary objective is to investigate the impact of depolarizing and amplitude damping noise on the classification performance of these algorithms. Using the Iris binary classification task, we simulated four noise levels (0, 0.01, 0.05, 0.1) and evaluated accuracy across 1024 measurement shots. Results show that QSVM achieves superior accuracy (70%) under ideal and lownoise conditions, while VQC exhibits higher resilience at moderate noise (50% at 0.05 noise level) due to its adaptive Variational parameters. At higher noise levels (0.1), both models converge to ~35–40% accuracy, indicating significant degradation. These findings provide actionable insights for algorithm selection on NISQ hardware, with VQC favored for moderately noisy devices and QSVM preferable for low-noise or error-mitigated systems. The study concludes by highlighting the need for noise-aware ansatz design and error mitigation techniques to enhance QML performance in NISQ regimes.

E3S Web of Conferences•Jan 1, 2026•0 citations

Performance Analysis of Variational Quantum Classifiers for Classification Tasks in the NISQ Era

Saghar Kiani, Paria Kamalpour, Sarina Ghafouri +1 more

Quantum Machine Learning (QML) leverages superposition, entanglement, and high-dimensional Hilbert spaces to model complex data structures that can be difficult for classical algorithms to approximate efficiency. In the Noisy Intermediate-Scale Quantum (NISQ) era, limited qubit counts, shallow circuits, and hardware noise constrain practically realizable quantum circuits and motivate the study of variational and hybrid approaches.This work presents a small-scale empirical benchmark of a two-qubit Variational Quantum Classifier (VQC) on the Iris dataset compared with a classical RBF-SVM baseline under noiseless and simulated depolarizing noise conditions. The VQC, implemented in Qiskit Aer with angle encoding and COBYLA optimization, achieves an accuracy of 0.93 ± 0.02 and an F1-score of 0.92 ± 0.03, close to the SVM’s 0.94 ± 0.01 and 0.93 ± 0.02, with a small but statistically detectable advantage for the classical model (p = 0.04, Cohen’s d = 0.48). Under a 2% depolarizing noise channel, the VQC exhibits a smaller relative drop in accuracy than the SVM, suggesting favorable behavior under mild simulated noise. The study serves as an educational, reproducible benchmark rather than a demonstration of quantum advantage.

International Interdisciplinary Conference on Artificial Intelligence: Engineering, Health, Finance and Humanities (IICAI)•May 1, 2026•0 citations

Noise-Aware Evaluation of Hybrid Quantum–Classical Models for Medical Binary Classification: Training Time vs Noise Level Analysis

Abhishek Gajanan Kolekar

This study presents a noise-aware evaluation framework for hybrid quantum–classical machine learning models applied to medical binary classification. Using three healthcare datasets—Pima Indians Diabetes, Heart Disease, and Breast Cancer Wisconsin—the performance of a Variational Quantum Classifier (VQC) was analyzed under multiple depolarizing noise levels (0.00–0.10). Classical baselines, Logistic Regression (LR) and Support Vector Machine (SVM), were implemented for comparison. The research investigates the impact of noise on predictive accuracy, F1-score, and training time, highlighting the computational overhead of hybrid quantum–classical models. Zero Noise Extrapolation (ZNE), using linear and Richardson methods, was applied to mitigate noise effects, revealing that while ZNE improves performance under certain conditions, extrapolation instability can occur. Transpiler optimization also contributed to improved VQC stability by reducing circuit complexity. Results show that classical models consistently outperformed the VQC in accuracy, stability, and training efficiency. VQC exhibited fluctuating performance under noise, requiring significantly higher training time, and increasing SPSA iterations did not always yield stable accuracy improvements. These findings underscore the challenges of noise robustness, optimization instability, and computational cost in the NISQ era, and suggest directions for future work, including alternative optimizers, adaptive ansatz design, advanced error mitigation, and real hardware benchmarking. This research provides a systematic benchmarking framework for evaluating training time versus noise-level trade-offs, contributing to the development of more reliable quantum machine learning models for medical applications. Keywords: Quantum Machine Learning, Variational Quantum Classifier, Depolarizing Noise, Zero Noise Extrapolation, Medical Classification, Hybrid Quantum–Classical Models, Training Time Analysis

•Apr 3, 2026•0 citations

Variational Quantum Machine Learning for Binary Classification on NISQ Hardware: Expressibility, Trainability, and Noise Robustness

Priya S. Mehta, Aleksandr V. Korolev

This study investigates classification performance and trainability of variational quantum classifiers on near-term noisy quantum hardware across circuit depth and qubit count regimes within the context of quantum computing and machine learning, an area of growing scientific importance given its implications for hybrid quantum-classical algorithm design and practical NISQ hardware benchmarking for near-term quantum advantage assessment. Using gradient-based parameter optimization of parameterized quantum circuits with hardware noise modeling via density matrix simulation and physical execution on IBM Eagle processors, we examine expressibility of parameterized circuits enabling nonlinear decision boundaries in feature Hilbert space, with trainability constrained by barren plateau gradients at large qubit counts in 96 circuit architectures (4 qubit counts x 4 depths x 6 ansatz families) evaluated across 5 classification datasets with 20 random initialization seeds each drawn from IBM Quantum Eagle (127-qubit) and Falcon (27-qubit) processors with noise mitigation via zero-noise extrapolation. Results indicate that 10-qubit, 4-layer VQC achieves 84.2% classification accuracy on the best benchmark, within 3.8 percentage points of classical SVM, but gradient variance decays exponentially with qubit count (variance halving per 2 added qubits), confirming barren plateau scaling (p < 0.001), with 84.2% accuracy, 3.8 pp gap to classical SVM baseline as the primary quantitative benchmark. Concordance between primary and confirmatory measurement approaches exceeded 93%, validating the analytical framework. These findings contribute empirically to quantum computing and machine learning and carry actionable implications for the design of programs and policies targeting hybrid quantum-classical algorithm design and practical NISQ hardware benchmarking for near-term quantum advantage assessment.

Princeton Journal of Pre-Collegiate Research•Jan 1, 2021•0 citations

Variational Quantum Classifiers: Comparing Data Encoding Strategies Under Noise

Shaurya Gera

Variational quantum classifiers (VQCs) are promising near-term quantum machine-learning models whose performance can depend on both the data-encoding method and circuit noise.This study compared angle encoding, amplitude encoding, and data re-uploading under three levels of simulated depolarizing noise using a fixed four-qubit, three-layer VQC.The comparison was repeated across the Iris versicolor-versus-virginica and Banknote Authentication datasets using multiple stratified data splits and parameter initializations, with a classical multilayer perceptron as a baseline.The relative performance of the encoding methods depended on the dataset: angle encoding produced the highest mean accuracy on Iris, while data re-uploading produced the highest mean accuracy on Banknote Authentication.Although statistical tests identified overall encoding differences in several Banknote conditions, no pairwise comparison remained significant after multiple-comparison correction.The classical baseline outperformed all tested quantum conditions.These findings show that encoding choice can affect VQC classifier behavior under simulated noise, but they do not establish a universally superior encoding method or direct robustness of the encoded quantum states.

Oxford Journal of Student Scholarship•Oct 1, 2026•0 citations

Comparative Analysis of Asymmetric Readout Errors on Variational Quantum Classifiers: Scaling from 2 to 4 Qubits

Feras Shita

Abstract Variational Quantum Classifiers (VQCs) represent a promising approach forquantum-enhanced machine learning on Noisy Intermediate-Scale Quantum(NISQ) processors. This paper presents a comprehensive comparative studyinvestigating the impact of asymmetric readout errors on VQC performanceacross system scales. Through systematic numerical simulations of both 2-qubitand 4-qubit architectures trained on synthetic binary classification tasks, weanalyze how qubit role dependence and scalability interact with noise resilience.Our 2-qubit results demonstrate the classical optimizer’s remarkable capacityto compensate for measurement qubit noise, achieving 28.3% lower empiricalloss than theoretical predictions, while auxiliary qubit noise proves significantlymore detrimental. Extending to 4-qubit systems reveals persistent compensatorymechanisms, though with different quantitative patterns: 10% measurementqubit noise yields optimal accuracy (0.500 vs. 0.380 ideal), representing a 31.6%improvement. We observe consistent theoretical-empirical alignment across scales,with theoretical MSE values for 4-qubit systems ranging from 0.9423-0.9462for 5-20% error rates. The study demonstrates that while fundamental noiseresilience patterns persist during scaling, quantitative trade-offs and optimaloperating points shift, providing crucial insights for practical VQC deploymenton asymmetric NISQ hardware.

•Feb 18, 2026•0 citations
Variational Quantum Classifiers (VQCs) have emerged as prime candidates for machine learning on NISQ systems. It stands to reason that the same depolarizing noise that drives quantum states toward the maximally mixed state would also alleviate the overconfidence of VQCs. This paper tests that hypothesis through an empirical study on three datasets at six noise levels, validated across ten random seeds and supported by a formal analysis of how the depolarizing channel contracts the measured logits. The primary finding is that depolarizing noise does not reduce overconfidence in VQCs that remain in the learnable regime: expected calibration error (ECE) never decreases with noise on any dataset, and on the lowest-variance dataset it increases significantly (Wilcoxon signed-rank p < 0.005 over ten seeds). We derive why the optimizer compensates for the channel and confirm the mechanism through a confidence-trajectory experiment. A secondary finding is that a less expressive ansatz can appear well-calibrated only because it collapses to a degenerate solution, demonstrating that ECE must always be reported alongside accuracy. Any effect of noise on accuracy is small and seed-dependent, and it is decoupled from calibration. Post-hoc temperature scaling reduces VQC ECE by 64 to 77 percent across all datasets and is the recommended calibration method for NISQ-era classifiers.
The rapid advancement of Noisy Intermediate-Scale Quantum (NISQ) devices necessitates a systematic evaluation of quantum machine learning (QML) algorithms to determine their feasibility for near-term applications. This study aims to benchmark the Variational Quantum Classifier (VQC)and the Quantum Kernel Support Vector Machine (QSVM) under realistic noise conditions modeled using Qiskit Aer. The primary objective is to investigate the impact of depolarizing and amplitude damping noise on the classification performance of these algorithms. Using the Iris binary classification task, we simulated four noise levels (0, 0.01, 0.05, 0.1) and evaluated accuracy across 1024 measurement shots. Results show that QSVM achieves superior accuracy (70%) under ideal and lownoise conditions, while VQC exhibits higher resilience at moderate noise (50% at 0.05 noise level) due to its adaptive Variational parameters. At higher noise levels (0.1), both models converge to ~35–40% accuracy, indicating significant degradation. These findings provide actionable insights for algorithm selection on NISQ hardware, with VQC favored for moderately noisy devices and QSVM preferable for low-noise or error-mitigated systems. The study concludes by highlighting the need for noise-aware ansatz design and error mitigation techniques to enhance QML performance in NISQ regimes.
Quantum Machine Learning (QML) leverages superposition, entanglement, and high-dimensional Hilbert spaces to model complex data structures that can be difficult for classical algorithms to approximate efficiency. In the Noisy Intermediate-Scale Quantum (NISQ) era, limited qubit counts, shallow circuits, and hardware noise constrain practically realizable quantum circuits and motivate the study of variational and hybrid approaches.This work presents a small-scale empirical benchmark of a two-qubit Variational Quantum Classifier (VQC) on the Iris dataset compared with a classical RBF-SVM baseline under noiseless and simulated depolarizing noise conditions. The VQC, implemented in Qiskit Aer with angle encoding and COBYLA optimization, achieves an accuracy of 0.93 ± 0.02 and an F1-score of 0.92 ± 0.03, close to the SVM’s 0.94 ± 0.01 and 0.93 ± 0.02, with a small but statistically detectable advantage for the classical model (p = 0.04, Cohen’s d = 0.48). Under a 2% depolarizing noise channel, the VQC exhibits a smaller relative drop in accuracy than the SVM, suggesting favorable behavior under mild simulated noise. The study serves as an educational, reproducible benchmark rather than a demonstration of quantum advantage.
This study presents a noise-aware evaluation framework for hybrid quantum–classical machine learning models applied to medical binary classification. Using three healthcare datasets—Pima Indians Diabetes, Heart Disease, and Breast Cancer Wisconsin—the performance of a Variational Quantum Classifier (VQC) was analyzed under multiple depolarizing noise levels (0.00–0.10). Classical baselines, Logistic Regression (LR) and Support Vector Machine (SVM), were implemented for comparison. The research investigates the impact of noise on predictive accuracy, F1-score, and training time, highlighting the computational overhead of hybrid quantum–classical models. Zero Noise Extrapolation (ZNE), using linear and Richardson methods, was applied to mitigate noise effects, revealing that while ZNE improves performance under certain conditions, extrapolation instability can occur. Transpiler optimization also contributed to improved VQC stability by reducing circuit complexity. Results show that classical models consistently outperformed the VQC in accuracy, stability, and training efficiency. VQC exhibited fluctuating performance under noise, requiring significantly higher training time, and increasing SPSA iterations did not always yield stable accuracy improvements. These findings underscore the challenges of noise robustness, optimization instability, and computational cost in the NISQ era, and suggest directions for future work, including alternative optimizers, adaptive ansatz design, advanced error mitigation, and real hardware benchmarking. This research provides a systematic benchmarking framework for evaluating training time versus noise-level trade-offs, contributing to the development of more reliable quantum machine learning models for medical applications. Keywords: Quantum Machine Learning, Variational Quantum Classifier, Depolarizing Noise, Zero Noise Extrapolation, Medical Classification, Hybrid Quantum–Classical Models, Training Time Analysis
This study investigates classification performance and trainability of variational quantum classifiers on near-term noisy quantum hardware across circuit depth and qubit count regimes within the context of quantum computing and machine learning, an area of growing scientific importance given its implications for hybrid quantum-classical algorithm design and practical NISQ hardware benchmarking for near-term quantum advantage assessment. Using gradient-based parameter optimization of parameterized quantum circuits with hardware noise modeling via density matrix simulation and physical execution on IBM Eagle processors, we examine expressibility of parameterized circuits enabling nonlinear decision boundaries in feature Hilbert space, with trainability constrained by barren plateau gradients at large qubit counts in 96 circuit architectures (4 qubit counts x 4 depths x 6 ansatz families) evaluated across 5 classification datasets with 20 random initialization seeds each drawn from IBM Quantum Eagle (127-qubit) and Falcon (27-qubit) processors with noise mitigation via zero-noise extrapolation. Results indicate that 10-qubit, 4-layer VQC achieves 84.2% classification accuracy on the best benchmark, within 3.8 percentage points of classical SVM, but gradient variance decays exponentially with qubit count (variance halving per 2 added qubits), confirming barren plateau scaling (p < 0.001), with 84.2% accuracy, 3.8 pp gap to classical SVM baseline as the primary quantitative benchmark. Concordance between primary and confirmatory measurement approaches exceeded 93%, validating the analytical framework. These findings contribute empirically to quantum computing and machine learning and carry actionable implications for the design of programs and policies targeting hybrid quantum-classical algorithm design and practical NISQ hardware benchmarking for near-term quantum advantage assessment.
Variational quantum classifiers (VQCs) are promising near-term quantum machine-learning models whose performance can depend on both the data-encoding method and circuit noise.This study compared angle encoding, amplitude encoding, and data re-uploading under three levels of simulated depolarizing noise using a fixed four-qubit, three-layer VQC.The comparison was repeated across the Iris versicolor-versus-virginica and Banknote Authentication datasets using multiple stratified data splits and parameter initializations, with a classical multilayer perceptron as a baseline.The relative performance of the encoding methods depended on the dataset: angle encoding produced the highest mean accuracy on Iris, while data re-uploading produced the highest mean accuracy on Banknote Authentication.Although statistical tests identified overall encoding differences in several Banknote conditions, no pairwise comparison remained significant after multiple-comparison correction.The classical baseline outperformed all tested quantum conditions.These findings show that encoding choice can affect VQC classifier behavior under simulated noise, but they do not establish a universally superior encoding method or direct robustness of the encoded quantum states.
Abstract Variational Quantum Classifiers (VQCs) represent a promising approach forquantum-enhanced machine learning on Noisy Intermediate-Scale Quantum(NISQ) processors. This paper presents a comprehensive comparative studyinvestigating the impact of asymmetric readout errors on VQC performanceacross system scales. Through systematic numerical simulations of both 2-qubitand 4-qubit architectures trained on synthetic binary classification tasks, weanalyze how qubit role dependence and scalability interact with noise resilience.Our 2-qubit results demonstrate the classical optimizer’s remarkable capacityto compensate for measurement qubit noise, achieving 28.3% lower empiricalloss than theoretical predictions, while auxiliary qubit noise proves significantlymore detrimental. Extending to 4-qubit systems reveals persistent compensatorymechanisms, though with different quantitative patterns: 10% measurementqubit noise yields optimal accuracy (0.500 vs. 0.380 ideal), representing a 31.6%improvement. We observe consistent theoretical-empirical alignment across scales,with theoretical MSE values for 4-qubit systems ranging from 0.9423-0.9462for 5-20% error rates. The study demonstrates that while fundamental noiseresilience patterns persist during scaling, quantitative trade-offs and optimaloperating points shift, providing crucial insights for practical VQC deploymenton asymmetric NISQ hardware.