Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Current monitoring for electric vehicle batteries using heteroepitaxial CVD diamond quantum sensors

Kenichi Kajiyama, Moriyoshi Haruyama, Yuji Hatano, Yuta Kainuma, Hiromitsu Kato, Masahiko Ogura, Toshiharu Makino, 野口仁, Abe Hiroshi, Onoda Shinobu, Ohshima Takeshi, Hatano Mutsuko, Takayuki Iwasaki

Published Nov 17, 2023• 0 citations
OpenAlex

Abstract

Diamond quantum sensors are suited to high-precision measurements of charge/discharge currents for monitoring electric vehicle batteries owing to the wide dynamic range sensing. We have so far demonstrated the current monitoring from 10 mA to 1000 A using nitrogen-vacancy (NV) centers in high-pressure and high-temperature grown diamond substates1. To expand the possibility of realizing the application using diamond quantum sensors, it is preferable to fabricate sensors on heteroepitaxial diamond grown on inexpensive substrates. In this study, we report the current monitoring using heteroepitaxially diamonds grown by chemical vapor deposition (CVD).

Related papers

Heteroepitaxial (111) Diamond Quantum Sensors with Preferentially Aligned Nitrogen‐Vacancy Centers for an Electric Vehicle Battery Monitor

Kenichi Kajiyama, Moriyoshi Haruyama, Yuji Hatano +7 more

Abstract A platform for heteroepitaxial (111) chemical vapor deposition (CVD) diamond quantum sensors with preferentially aligned nitrogen vacancy (NV) centers on a large substrate is developed, and its operation as an electric vehicle (EV) battery monitor is demonstrated. A self‐standing heteroepitaxial CVD diamond film with a (111) orientation and a thickness of 150 µm is grown on a non‐diamond substrate and subsequently separated from it. The high uniformity and crystallinity of the (111)‐oriented diamond is confirmed. A 150‐µm thick NV‐diamond layer is then deposited on the heteroepitaxial diamond. The T 2 value measured by confocal microscopy is 20 µs, which corresponds to substitutional nitrogen defect concentration of 8 ppm. The nitrogen‐vacancy concentration and T 2 * are estimated to be 0.05 ppm and 0.05 µs by continuous wave optically detected magnetic resonance (CW‐ODMR) spectroscopy in a fiber‐top sensor configuration. In a gradiometer, where two sensors are placed on both sides of the busbar, the noise floor is 17 nT/Hz 0.5 in the frequency range of 10–40 Hz without magnetic shielding. The Allan deviation of the magnetic field noise in the laboratory is below 0.3 µT, which corresponds to a busbar current of 10 mA, in the accumulation time range of 10 ms to 100 s.

Advanced Quantum Technologies•Jan 18, 2025•17 citations

Wide temperature operation of diamond quantum sensor for electric vehicle battery monitoring

Keisuke Kubota, Yuji Hatano, Yuta Kainuma +9 more

Considering the rising popularity of electric vehicles (EVs), it is essential to enhance the cruising mileage and extend the lifetime of batteries. To accomplish this, accurate monitoring of the charge and discharge current of the battery over a wide temperature range is essential. We developed a compact diamond quantum sensor head with a size of 1 × 1 × 0.5 cm3, consisting of a (111) high-pressure and high-temperature synthesized diamond with nitrogen-vacancy centers, by electron beam irradiation, which was adhered to the top of the multimode fiber and surrounded by the microwave antenna, for EV battery monitoring. We demonstrated that our quantum sensor achieved the current measurement accuracy of 10 mA in the −150 to 150 °C temperature range with a bandwidth of 500 Hz under atmospheric pressure and confirmed that the diamond quantum sensor meets the performance requirements of EV current sensors. Moreover, the temperature dependence of shot noise and external magnetic field noise were investigated, and their relation to the linewidth and contrast of the optically detected magnetic resonance spectrum were analyzed. At high temperatures, the contrast decreased because shortening of the singlet lifetime, which accelerate the initialization. At low temperatures, the contrast was slightly decreased. This is possibly a result of increased losses due to condensation on the microwave antenna.

Diamond and Related Materials•Mar 15, 2023•30 citations

High-precision robust monitoring of charge/discharge current over a wide dynamic range for electric vehicle batteries using diamond quantum sensors

Yuji Hatano, Jae-Won Shin, Junya Tanigawa +8 more

Abstract Accurate prediction of the remaining driving range of electric vehicles is difficult because the state-of-the-art sensors for measuring battery current are not accurate enough to estimate the state of charge. This is because the battery current of EVs can reach a maximum of several hundred amperes while the average current is only approximately 10 A, and ordinary sensors do not have an accuracy of several tens of milliamperes while maintaining a dynamic range of several hundred amperes. Therefore, the state of charge has to be estimated with an ambiguity of approximately 10%, which makes the battery usage inefficient. This study resolves this limitation by developing a diamond quantum sensor with an inherently wide dynamic range and high sensitivity for measuring the battery current. The design uses the differential detection of two sensors to eliminate in-vehicle common-mode environmental noise, and a mixed analog–digital control to trace the magnetic resonance microwave frequencies of the quantum sensor without deviation over a wide dynamic range. The prototype battery monitor was fabricated and tested. The battery module current was measured up to 130 A covering WLTC driving pattern, and the accuracy of the current sensor to estimate battery state of charge was analyzed to be 10 mA, which will lead to 0.2% CO2 reduction emitted in the 2030 WW transportation field. Moreover, an operating temperature range of − 40 to + 85 °C and a maximum current dynamic range of ± 1000 A were confirmed.

Scientific Reports•Sep 6, 2022•87 citations

Characterization of low-nitrogen quantum diamond for pulsed magnetometry applications

Jiashen Tang, Connor Roncaioli, Andrew Mark Edmonds +4 more

Ensembles of nitrogen-vacancy (NV) centers in diamond are versatile quantum sensors with broad applications in the physical and life sciences. The concentration of neutral substitutional nitrogen ( [ N s 0 ]) strongly influences NV electronic spin coherence times, sensitivity, and optimal sensing strategies. Diamonds with [ N s 0 ] ∼ 1–10 ppm are a focus of recent material engineering efforts, with higher concentrations being favorable for continuous-wave optically detected magnetic resonance (CW-ODMR) and lower concentrations expected to benefit pulsed magnetometry techniques through extended NV spin coherence times and improved sensing duty cycles. In this work, we synthesize and characterize low- [ N s 0 ] ( ∼ 0.8 ppm), NV-enriched diamond material, engineered through low-strain chemical vapor deposition (CVD) growth on high-quality substrates, 12 C isotopic purification, and controlled electron irradiation and annealing. Our results demonstrate good strain homogeneity in diamonds grown on CVD substrates and spin-bath-limited NV dephasing times. By measuring NV spin and charge properties across a wide range of optical NV excitation intensity, we provide direct comparisons of photon-shot-noise-limited magnetic field sensitivity between the current low- [ N s 0 ] and previously studied higher- [ N s 0 ] ( ∼ 14 ppm) NV-diamond sensors. We show that low- [ N s 0 ] diamond can outperform higher- [ N s 0 ] diamond at moderate and low optical NV excitation intensity. Our results provide practical benchmarks and guidance for selecting NV-diamond sensors tailored to specific experimental constraints and sensing requirements.

arXiv:2509.06884•Frontiers in Quantum Science and Technology•Dec 9, 2025•1 citation

High dynamic range open-loop current measurement based on diamond quantum magnetometer achieving ppm scale precision

Qihui Liu, Chen, Hao, Fei Xie +10 more

Negatively charged nitrogen-vacancy (NV) centers in diamond have been extensively studied as a promising high sensitivity solid-state magnetic field sensor at room temperature. However, their use for current sensing applications is limited due to the challenge of integration and miniaturization of the diamond NV sensor. Here, we demonstrate an integrated NV sensor fabricated with standard microfabrication process. The sensor device incorporated with a toroidal magnetic yoke enables a high-precision wide range direct current sensing with galvanic isolation. The performance of the diamond NV current sensor in an open loop configuration has been investigated. A current measuring range of 0 A ~ 1000 A with an uncertainty of 46 ppm are achieved. Taking advantage of dual spin resonance modulation, temperature drift is suppressed to 10 ppm/K. This configuration opens new possibilities as a robust and scalable platform for current quantum sensing technologies.

arXiv:2304.07998•Apr 17, 2023•1 citation

Transverse magnetic field effects on diamond quantum sensor for EV battery monitor

Yuji Hatano, Junya Tanigawa, Akimichi Nakazono +7 more

Key implementation points for achieving full accuracy in simultaneous temperature and magnetic field measurement and linearity when applying diamond quantum sensors to electric vehicle (EV) battery monitors were investigated. Both the static and busbar current magnetic field are required to be aligned to the NV-axis. If misalignment should exist, the resonance frequency midpoint move in the direction opposite to the temperature change under a large busbar current due to the transverse magnetic field effect. Misalignment could be quantified with an accuracy of ±1° by analysing the resonance frequency midpoint change under a current of ±1,000 A. The transverse magnetic field effects compensation estimated from misalignment, confirmed that the resonance frequency midpoint changed consistently with temperature changes. Furthermore, linearity over a wide dynamic range also improved. Moreover, it will contribute to accurate alignment of the two sensors for differential detection to eliminate external noise as common mode. These are expected to expand the application of diamond sensors for high-precision measurement in a wide dynamic range.

Frontiers in Quantum Science and Technology•Sep 3, 2024•4 citations
Diamond quantum sensors are suited to high-precision measurements of charge/discharge currents for monitoring electric vehicle batteries owing to the wide dynamic range sensing. We have so far demonstrated the current monitoring from 10 mA to 1000 A using nitrogen-vacancy (NV) centers in high-pressure and high-temperature grown diamond substates1. To expand the possibility of realizing the application using diamond quantum sensors, it is preferable to fabricate sensors on heteroepitaxial diamond grown on inexpensive substrates. In this study, we report the current monitoring using heteroepitaxially diamonds grown by chemical vapor deposition (CVD).
Abstract A platform for heteroepitaxial (111) chemical vapor deposition (CVD) diamond quantum sensors with preferentially aligned nitrogen vacancy (NV) centers on a large substrate is developed, and its operation as an electric vehicle (EV) battery monitor is demonstrated. A self‐standing heteroepitaxial CVD diamond film with a (111) orientation and a thickness of 150 µm is grown on a non‐diamond substrate and subsequently separated from it. The high uniformity and crystallinity of the (111)‐oriented diamond is confirmed. A 150‐µm thick NV‐diamond layer is then deposited on the heteroepitaxial diamond. The T 2 value measured by confocal microscopy is 20 µs, which corresponds to substitutional nitrogen defect concentration of 8 ppm. The nitrogen‐vacancy concentration and T 2 * are estimated to be 0.05 ppm and 0.05 µs by continuous wave optically detected magnetic resonance (CW‐ODMR) spectroscopy in a fiber‐top sensor configuration. In a gradiometer, where two sensors are placed on both sides of the busbar, the noise floor is 17 nT/Hz 0.5 in the frequency range of 10–40 Hz without magnetic shielding. The Allan deviation of the magnetic field noise in the laboratory is below 0.3 µT, which corresponds to a busbar current of 10 mA, in the accumulation time range of 10 ms to 100 s.
Considering the rising popularity of electric vehicles (EVs), it is essential to enhance the cruising mileage and extend the lifetime of batteries. To accomplish this, accurate monitoring of the charge and discharge current of the battery over a wide temperature range is essential. We developed a compact diamond quantum sensor head with a size of 1 × 1 × 0.5 cm3, consisting of a (111) high-pressure and high-temperature synthesized diamond with nitrogen-vacancy centers, by electron beam irradiation, which was adhered to the top of the multimode fiber and surrounded by the microwave antenna, for EV battery monitoring. We demonstrated that our quantum sensor achieved the current measurement accuracy of 10 mA in the −150 to 150 °C temperature range with a bandwidth of 500 Hz under atmospheric pressure and confirmed that the diamond quantum sensor meets the performance requirements of EV current sensors. Moreover, the temperature dependence of shot noise and external magnetic field noise were investigated, and their relation to the linewidth and contrast of the optically detected magnetic resonance spectrum were analyzed. At high temperatures, the contrast decreased because shortening of the singlet lifetime, which accelerate the initialization. At low temperatures, the contrast was slightly decreased. This is possibly a result of increased losses due to condensation on the microwave antenna.
Abstract Accurate prediction of the remaining driving range of electric vehicles is difficult because the state-of-the-art sensors for measuring battery current are not accurate enough to estimate the state of charge. This is because the battery current of EVs can reach a maximum of several hundred amperes while the average current is only approximately 10 A, and ordinary sensors do not have an accuracy of several tens of milliamperes while maintaining a dynamic range of several hundred amperes. Therefore, the state of charge has to be estimated with an ambiguity of approximately 10%, which makes the battery usage inefficient. This study resolves this limitation by developing a diamond quantum sensor with an inherently wide dynamic range and high sensitivity for measuring the battery current. The design uses the differential detection of two sensors to eliminate in-vehicle common-mode environmental noise, and a mixed analog–digital control to trace the magnetic resonance microwave frequencies of the quantum sensor without deviation over a wide dynamic range. The prototype battery monitor was fabricated and tested. The battery module current was measured up to 130 A covering WLTC driving pattern, and the accuracy of the current sensor to estimate battery state of charge was analyzed to be 10 mA, which will lead to 0.2% CO2 reduction emitted in the 2030 WW transportation field. Moreover, an operating temperature range of − 40 to + 85 °C and a maximum current dynamic range of ± 1000 A were confirmed.
Ensembles of nitrogen-vacancy (NV) centers in diamond are versatile quantum sensors with broad applications in the physical and life sciences. The concentration of neutral substitutional nitrogen ( [ N s 0 ]) strongly influences NV electronic spin coherence times, sensitivity, and optimal sensing strategies. Diamonds with [ N s 0 ] ∼ 1–10 ppm are a focus of recent material engineering efforts, with higher concentrations being favorable for continuous-wave optically detected magnetic resonance (CW-ODMR) and lower concentrations expected to benefit pulsed magnetometry techniques through extended NV spin coherence times and improved sensing duty cycles. In this work, we synthesize and characterize low- [ N s 0 ] ( ∼ 0.8 ppm), NV-enriched diamond material, engineered through low-strain chemical vapor deposition (CVD) growth on high-quality substrates, 12 C isotopic purification, and controlled electron irradiation and annealing. Our results demonstrate good strain homogeneity in diamonds grown on CVD substrates and spin-bath-limited NV dephasing times. By measuring NV spin and charge properties across a wide range of optical NV excitation intensity, we provide direct comparisons of photon-shot-noise-limited magnetic field sensitivity between the current low- [ N s 0 ] and previously studied higher- [ N s 0 ] ( ∼ 14 ppm) NV-diamond sensors. We show that low- [ N s 0 ] diamond can outperform higher- [ N s 0 ] diamond at moderate and low optical NV excitation intensity. Our results provide practical benchmarks and guidance for selecting NV-diamond sensors tailored to specific experimental constraints and sensing requirements.
Negatively charged nitrogen-vacancy (NV) centers in diamond have been extensively studied as a promising high sensitivity solid-state magnetic field sensor at room temperature. However, their use for current sensing applications is limited due to the challenge of integration and miniaturization of the diamond NV sensor. Here, we demonstrate an integrated NV sensor fabricated with standard microfabrication process. The sensor device incorporated with a toroidal magnetic yoke enables a high-precision wide range direct current sensing with galvanic isolation. The performance of the diamond NV current sensor in an open loop configuration has been investigated. A current measuring range of 0 A ~ 1000 A with an uncertainty of 46 ppm are achieved. Taking advantage of dual spin resonance modulation, temperature drift is suppressed to 10 ppm/K. This configuration opens new possibilities as a robust and scalable platform for current quantum sensing technologies.
Key implementation points for achieving full accuracy in simultaneous temperature and magnetic field measurement and linearity when applying diamond quantum sensors to electric vehicle (EV) battery monitors were investigated. Both the static and busbar current magnetic field are required to be aligned to the NV-axis. If misalignment should exist, the resonance frequency midpoint move in the direction opposite to the temperature change under a large busbar current due to the transverse magnetic field effect. Misalignment could be quantified with an accuracy of ±1° by analysing the resonance frequency midpoint change under a current of ±1,000 A. The transverse magnetic field effects compensation estimated from misalignment, confirmed that the resonance frequency midpoint changed consistently with temperature changes. Furthermore, linearity over a wide dynamic range also improved. Moreover, it will contribute to accurate alignment of the two sensors for differential detection to eliminate external noise as common mode. These are expected to expand the application of diamond sensors for high-precision measurement in a wide dynamic range.