Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

International Conference on Communications

Bandwidth Enhanced Rydberg Atomic Quantum Receivers for Wireless Communication and Sensing

Huizhi Wang, Tierui Gong, Emil Björnson, Chau Yuen

Published May 24, 2026• 0 citations
Publisher

Abstract

Rydberg atomic quantum receivers (RAQRs) have emerged as highly sensitive receivers for future communication and sensing systems. However, conventional RAQRs are primarily effective for single-carrier and narrowband reception, typically with an operational bandwidth of only a few hundred kilohertz. To enable the reception of multi-carrier signals with larger bandwidth, we propose a multi-carrier Rydberg atomic quantum receiver (MC-RAQR) architecture based on a five-level quantum system model. We analyze the amplitude and phase of the output laser in MC-RAQR and extract the baseband electrical signal for signal processing. Furthermore, we quantify the performance of MC-RAQR in multi-carrier communication and sensing by studying the channel capacity and distance estimation, respectively. Numerical results show that the MC-RAQR is capable of achieving a bandwidth of $7.2$ MHz, which is an order of magnitude larger than conventional RAQRs. Besides, compared to conventional receivers, MC-RAQR can improve the capacity and distance estimation by $18$-fold and $10^3$-fold, respectively. This validates the superiority of MC-RAQR in receiving multi-carrier signal, and demonstrates its compatibility in detecting waveforms such as orthogonal frequency‐division multiplexing.

DOI
10.1109/icc59461.2026.11588268

Related papers

Rydberg Atomic Quantum Receivers for Classical Wireless Communications and Sensing: Their Models and Performance

Tierui Gong, Jiaming Sun, Chau Yuen +6 more

The significant progress of quantum sensing technologies offer numerous radical solutions for measuring a multitude of physical quantities at an unprecedented precision. Among them, Rydberg atomic quantum receivers (RAQRs) emerge as an eminent solution for detecting the electric field of radio frequency (RF) signals, exhibiting great potential in assisting classical wireless communications and sensing. So far, most experimental studies have aimed for the proof of physical concepts to reveal its promise, while the practical signal model of RAQR-aided wireless communications and sensing remained under-explored. Furthermore, the performance of RAQR-based wireless receivers and their advantages over classical RF receivers have not been fully characterized. To fill these gaps, we introduce the RAQR to the wireless community by presenting an end-to-end reception scheme. We then develop a corresponding equivalent baseband signal model relying on a realistic reception flow. Our scheme and model provide explicit design guidance to RAQR-aided wireless systems. We next study the performance of RAQR-aided wireless systems based on our model, and compare them to classical RF receivers. The results show that Doppler broadening-free RAQRs are capable of achieving a substantial received signal-to-noise ratio (SNR) gain of over 27 decibel (dB) and 40 dB in the photon shot limit and standard quantum limit regimes, respectively.

arXiv:2412.05554•IEEE Transactions on Communications•Jan 1, 2026•9 citations

Hybrid Six-Level Rydberg Atomic Quantum Receiver for Multi-Band Wireless Communications

Lahiru Shyamal, Harini Hapuarachchi, Saman Atapattu +1 more

Rydberg atomic quantum receivers (RAQRs) have recently emerged as a promising technology for radio-frequency (RF) reception by directly transducing incident RF fields into optical signals. Existing receiver architectures, however, exploit only subsets of the dipole-allowed transitions within a given atomic manifold, limiting the number of simultaneously accessible RF channels. In this paper, a hybrid six-level Rydberg atomic quantum receiver (H-RAQR) is proposed by integrating parallel and cascaded RF coupling pathways within a single vapor-cell receiver. A communication-oriented analytical framework is developed by deriving a closed-form steady-state atom--field interaction model and establishing an equivalent baseband signal representation. The achievable ergodic sum rate is analyzed, and a resource-efficiency metric is introduced to quantify throughput per unit optical receiver resource. The analytical model is validated against full Lindblad master-equation simulations over its identified operating region. Numerical results show that the proposed H-RAQR supports four simultaneous RF channels within a single atomic system, achieves higher ergodic sum rate than conventional parallel Rydberg state (PRS) and cascade Rydberg state (CRS) receivers, and provides about 29% higher resource efficiency than a combined PRS-CRS deployment with equivalent four-band coverage. The proposed framework provides a scalable foundation for multi-band atomic wireless receivers.

quant-pharXiv:2604.12106•Apr 15, 2026•0 citations

Rydberg Atomic Quantum Receivers for Wireless Communications: Two-Color Versus Three-Color Excitation

Jian Mei Xiao, Tierui Gong, Ji Wang +2 more

An efficient three-color (3C) laser excitation-based Rydberg atomic quantum receiver (RAQR) architecture is investigated for wireless communications, utilizing a five-level (5L) electronic transition mechanism. Specifically, the conventional two-color (2C) RAQR with the four-level (4L) excitation faces three fundamental obstacles: 1) high cost and engineering challenges due to the reliance on unstable short-wavelength lasers; 2) a fundamental sensitivity limit in thermal atoms caused by residual Doppler broadening; and 3) the inability to detect low-frequency bands due to the energy-level constraint of two-photon resonance. To address these challenges, this paper analyzes a 3C5L-RAQR architecture with all-red/infrared lasers, which not only solves the engineering cost issues but also enables effective Doppler cancellation and low-frequency detection by exploiting the three-photon resonance. Bridging atomic physics and communication theory, an end-to-end equivalent baseband signal model is derived. Furthermore, the performance of different RAQR architectures is evaluated in terms of sensitivity, achievable rate and spectrum access range. Moreover, we provide an exact numerical solution for practical RAQRs by employing the Liouvillian superoperator formalism. Numerical results demonstrate that the exhibited 3C5L-RAQR achieves superior sensitivity compared to the conventional 2C4L-RAQR and a classical antenna-based radio frequency receiver for weak-signal detection. Finally, the inherent sensitivity-rate trade-off is revealed, showing that the 3C5L-RAQR is more suitable for deployment in power-limited communication scenarios demanding broad spectrum access.

arXiv:2603.24062•IEEE Journal on Selected Areas in Communications•Jan 1, 2026•1 citation

An Equivalent Baseband Signal Model for Rydberg Atomic Quantum Receiver Aided Wireless Communications and Sensing

Tierui Gong, Jiaming Sun, Chau Yuen +6 more

Rydberg atomic quantum receivers (RAQRs) emerge as a radical solution for detecting radio frequency (RF) signals, showing great potential in assisting classical wireless communications and sensing. However, the current studies of RAQRs mainly focus on realizing fundamental functionalities via experiments, where the results cannot be readily harnessed for assisting wireless communications and sensing. Moreover, the advantages of RAQR-based wireless receivers have not been fully characterized. To fill the gap, we introduce the superheterodyne version of RAQRs and present the associated end-to-end transmission scheme. We then develop a corresponding end-to-end equivalent baseband signal model relying on a realistic transmission flow. Our scheme and model provide explicit design guidance for RAQR-aided wireless systems. We finally verify the effectiveness of the proposed signal model with respect to the waveform of the photodetector, input-output relationship (transfer function), and the normalized mean-squared error between the nonlinear transfer function and its linear approximation.

International Conference on Quantum Communications, Networking, and Computing (QCNC)•Mar 31, 2025•3 citations

Multi-Chirp AFDM for Rydberg Atomic Quantum Receivers: Waveform and Algorithm Design

Hanvit Kim, Hyeon Seok Rou, Kihong Min +2 more

We propose a multi-chirp affine frequency division multiplexing (MC-AFDM) scheme for joint delay-Doppler estimation with Rydberg atomic quantum receivers (RAQRs). The work is motivated by the fact that RAQRs, while offering superior sensitivity and advantageous sensing capabilities, suffer from an optical ambiguity due to Doppler shifts in doubly-dispersive (DD) channel caused by target mobility, which precludes the reliable estimation of delay-Doppler parameters. To resolve this optical ambiguity and unleash the potential of RAQRs in DD channel, the proposed MC-AFDM employs multiple distinct AFDM post-chirp signals to overcome the rank-deficiency problem of the classical single-chirp AFDM (SC-AFDM), thereby enabling accurate delay-Doppler estimation of multiple targets. Our analysis reveals that the edge distribution of the multiple post-chirp parameters can further improve estimation accuracy by minimizing the condition number. Building on the proposed MC-AFDM waveform, we design a sequential signal processing algorithm based on orthogonal matching pursuit (OMP) and least squares (LS), and we derive the theoretical lower bounds for delay and Doppler estimation. Numerical results show that the proposed MC-AFDM improves range and velocity estimation accuracy by up to two orders of magnitude compared to the classical SC-AFDM, and approaches its theoretical bounds through post-chirp optimization, validating the quantum-induced advantage of RAQRs for high-resolution quantum wireless sensing.

arXiv:2607.27903•Jul 30, 2026•0 citations

Rydberg Atomic Quantum Receivers for OFDM Systems: An Atomic-Comb Design

Yuanbin Chen, Chong Meng Samson See, Chau Yuen

Rydberg atomic quantum receivers (RAQR) exhibit exceptional sensitivity to radio-frequency (RF) signals, positioning them as promising candidates for next-generation wireless systems. Extending their capabilities to orthogonal frequency-division multiplexing (OFDM), however, requires atomic responses that go beyond broadband reception and are tailored to the structured interference of multicarrier signals. To bridge this gap, we develop an atomic-comb Rydberg receiver based on six-wave mixing (SWM) transduction. In particular, injecting a multi-tone local oscillator (LO) into the RAQR generates frequency-shifted replicas of the intrinsic SWM response. By subtly tuning the amplitude and phase of each LO tone, constructive and destructive interference can be selectively induced to preserve desired response components while attenuating harmful frequency offsets. Furthermore, we harness the response-reshaping capability of the proposed atomic comb to proactively mitigate OFDM interference. More explicitly, by exploiting the discrete difference-frequency structure of both carrier-frequency-offset (CFO)-induced and phase-noise (PN)-induced inter-carrier interference (ICI), we optimize the atomic-comb response to suppress dominant ICI components directly. We further reveal an intrinsic coupling between spectral shaping and the time-domain effective channel memory, motivating a joint optimization of both ICI and inter-symbol interference (ISI), which simultaneously suppresses inter-carrier leakage and post-cyclic-prefix (CP) tail energy. Extensive simulation results validate our atomic-comb design, unveiling that the proposed atomic comb can effectively reshape the receiver response over the OFDM, while mitigating ICI, shortening the effective channel memory, and substantially lowering CP overhead.

cs.ITCross-listedarXiv:2610.15306•Oct 13, 2026•0 citations
Rydberg atomic quantum receivers (RAQRs) have emerged as highly sensitive receivers for future communication and sensing systems. However, conventional RAQRs are primarily effective for single-carrier and narrowband reception, typically with an operational bandwidth of only a few hundred kilohertz. To enable the reception of multi-carrier signals with larger bandwidth, we propose a multi-carrier Rydberg atomic quantum receiver (MC-RAQR) architecture based on a five-level quantum system model. We analyze the amplitude and phase of the output laser in MC-RAQR and extract the baseband electrical signal for signal processing. Furthermore, we quantify the performance of MC-RAQR in multi-carrier communication and sensing by studying the channel capacity and distance estimation, respectively. Numerical results show that the MC-RAQR is capable of achieving a bandwidth of 7.27.27.2 MHz, which is an order of magnitude larger than conventional RAQRs. Besides, compared to conventional receivers, MC-RAQR can improve the capacity and distance estimation by 181818-fold and 10310^3103-fold, respectively. This validates the superiority of MC-RAQR in receiving multi-carrier signal, and demonstrates its compatibility in detecting waveforms such as orthogonal frequency‐division multiplexing.
The significant progress of quantum sensing technologies offer numerous radical solutions for measuring a multitude of physical quantities at an unprecedented precision. Among them, Rydberg atomic quantum receivers (RAQRs) emerge as an eminent solution for detecting the electric field of radio frequency (RF) signals, exhibiting great potential in assisting classical wireless communications and sensing. So far, most experimental studies have aimed for the proof of physical concepts to reveal its promise, while the practical signal model of RAQR-aided wireless communications and sensing remained under-explored. Furthermore, the performance of RAQR-based wireless receivers and their advantages over classical RF receivers have not been fully characterized. To fill these gaps, we introduce the RAQR to the wireless community by presenting an end-to-end reception scheme. We then develop a corresponding equivalent baseband signal model relying on a realistic reception flow. Our scheme and model provide explicit design guidance to RAQR-aided wireless systems. We next study the performance of RAQR-aided wireless systems based on our model, and compare them to classical RF receivers. The results show that Doppler broadening-free RAQRs are capable of achieving a substantial received signal-to-noise ratio (SNR) gain of over 27 decibel (dB) and 40 dB in the photon shot limit and standard quantum limit regimes, respectively.
Rydberg atomic quantum receivers (RAQRs) have recently emerged as a promising technology for radio-frequency (RF) reception by directly transducing incident RF fields into optical signals. Existing receiver architectures, however, exploit only subsets of the dipole-allowed transitions within a given atomic manifold, limiting the number of simultaneously accessible RF channels. In this paper, a hybrid six-level Rydberg atomic quantum receiver (H-RAQR) is proposed by integrating parallel and cascaded RF coupling pathways within a single vapor-cell receiver. A communication-oriented analytical framework is developed by deriving a closed-form steady-state atom--field interaction model and establishing an equivalent baseband signal representation. The achievable ergodic sum rate is analyzed, and a resource-efficiency metric is introduced to quantify throughput per unit optical receiver resource. The analytical model is validated against full Lindblad master-equation simulations over its identified operating region. Numerical results show that the proposed H-RAQR supports four simultaneous RF channels within a single atomic system, achieves higher ergodic sum rate than conventional parallel Rydberg state (PRS) and cascade Rydberg state (CRS) receivers, and provides about 29% higher resource efficiency than a combined PRS-CRS deployment with equivalent four-band coverage. The proposed framework provides a scalable foundation for multi-band atomic wireless receivers.
An efficient three-color (3C) laser excitation-based Rydberg atomic quantum receiver (RAQR) architecture is investigated for wireless communications, utilizing a five-level (5L) electronic transition mechanism. Specifically, the conventional two-color (2C) RAQR with the four-level (4L) excitation faces three fundamental obstacles: 1) high cost and engineering challenges due to the reliance on unstable short-wavelength lasers; 2) a fundamental sensitivity limit in thermal atoms caused by residual Doppler broadening; and 3) the inability to detect low-frequency bands due to the energy-level constraint of two-photon resonance. To address these challenges, this paper analyzes a 3C5L-RAQR architecture with all-red/infrared lasers, which not only solves the engineering cost issues but also enables effective Doppler cancellation and low-frequency detection by exploiting the three-photon resonance. Bridging atomic physics and communication theory, an end-to-end equivalent baseband signal model is derived. Furthermore, the performance of different RAQR architectures is evaluated in terms of sensitivity, achievable rate and spectrum access range. Moreover, we provide an exact numerical solution for practical RAQRs by employing the Liouvillian superoperator formalism. Numerical results demonstrate that the exhibited 3C5L-RAQR achieves superior sensitivity compared to the conventional 2C4L-RAQR and a classical antenna-based radio frequency receiver for weak-signal detection. Finally, the inherent sensitivity-rate trade-off is revealed, showing that the 3C5L-RAQR is more suitable for deployment in power-limited communication scenarios demanding broad spectrum access.
Rydberg atomic quantum receivers (RAQRs) emerge as a radical solution for detecting radio frequency (RF) signals, showing great potential in assisting classical wireless communications and sensing. However, the current studies of RAQRs mainly focus on realizing fundamental functionalities via experiments, where the results cannot be readily harnessed for assisting wireless communications and sensing. Moreover, the advantages of RAQR-based wireless receivers have not been fully characterized. To fill the gap, we introduce the superheterodyne version of RAQRs and present the associated end-to-end transmission scheme. We then develop a corresponding end-to-end equivalent baseband signal model relying on a realistic transmission flow. Our scheme and model provide explicit design guidance for RAQR-aided wireless systems. We finally verify the effectiveness of the proposed signal model with respect to the waveform of the photodetector, input-output relationship (transfer function), and the normalized mean-squared error between the nonlinear transfer function and its linear approximation.
We propose a multi-chirp affine frequency division multiplexing (MC-AFDM) scheme for joint delay-Doppler estimation with Rydberg atomic quantum receivers (RAQRs). The work is motivated by the fact that RAQRs, while offering superior sensitivity and advantageous sensing capabilities, suffer from an optical ambiguity due to Doppler shifts in doubly-dispersive (DD) channel caused by target mobility, which precludes the reliable estimation of delay-Doppler parameters. To resolve this optical ambiguity and unleash the potential of RAQRs in DD channel, the proposed MC-AFDM employs multiple distinct AFDM post-chirp signals to overcome the rank-deficiency problem of the classical single-chirp AFDM (SC-AFDM), thereby enabling accurate delay-Doppler estimation of multiple targets. Our analysis reveals that the edge distribution of the multiple post-chirp parameters can further improve estimation accuracy by minimizing the condition number. Building on the proposed MC-AFDM waveform, we design a sequential signal processing algorithm based on orthogonal matching pursuit (OMP) and least squares (LS), and we derive the theoretical lower bounds for delay and Doppler estimation. Numerical results show that the proposed MC-AFDM improves range and velocity estimation accuracy by up to two orders of magnitude compared to the classical SC-AFDM, and approaches its theoretical bounds through post-chirp optimization, validating the quantum-induced advantage of RAQRs for high-resolution quantum wireless sensing.
Rydberg atomic quantum receivers (RAQR) exhibit exceptional sensitivity to radio-frequency (RF) signals, positioning them as promising candidates for next-generation wireless systems. Extending their capabilities to orthogonal frequency-division multiplexing (OFDM), however, requires atomic responses that go beyond broadband reception and are tailored to the structured interference of multicarrier signals. To bridge this gap, we develop an atomic-comb Rydberg receiver based on six-wave mixing (SWM) transduction. In particular, injecting a multi-tone local oscillator (LO) into the RAQR generates frequency-shifted replicas of the intrinsic SWM response. By subtly tuning the amplitude and phase of each LO tone, constructive and destructive interference can be selectively induced to preserve desired response components while attenuating harmful frequency offsets. Furthermore, we harness the response-reshaping capability of the proposed atomic comb to proactively mitigate OFDM interference. More explicitly, by exploiting the discrete difference-frequency structure of both carrier-frequency-offset (CFO)-induced and phase-noise (PN)-induced inter-carrier interference (ICI), we optimize the atomic-comb response to suppress dominant ICI components directly. We further reveal an intrinsic coupling between spectral shaping and the time-domain effective channel memory, motivating a joint optimization of both ICI and inter-symbol interference (ISI), which simultaneously suppresses inter-carrier leakage and post-cyclic-prefix (CP) tail energy. Extensive simulation results validate our atomic-comb design, unveiling that the proposed atomic comb can effectively reshape the receiver response over the OFDM, while mitigating ICI, shortening the effective channel memory, and substantially lowering CP overhead.