Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

International Conference on Communications

A Physical Layer Security Method Based on Multi-AAV Collaborative Beamforming

Jiaxing Wang, Hengyan Xu, Xin Xie, Rui Han, Lin Bai

Published May 1, 2026• 0 citations
Publisher

Abstract

With the development of the low-altitude economy, a large number of autonomous aerial vehicles (AAVs) will be deployed in low-altitude environments, capable of effectively performing data collection and relay tasks. Unlike non-line-of-sight transmission environments on the ground, the line-of-sight transmission of AAVs offers greater channel gain while facing a higher risk of data interception. Although the traditional encryption method can decrease the risk of data being cracked, it cannot diminish the probability of data being intercepted by eavesdroppers. In this paper, we propose a physical layer security method based on the distributed collaborative beamforming for the multi-AAV networks, in which both scenarios of known and unknown eavesdropper locations are considered. Then, two beamforming algorithms are designed for these scenarios. Besides, the theoretical performance is derived for the case where the location of the eavesdropper is known, while for the unknown-location case, a beamforming scheme based on the generalized Rayleigh quotient is introduced to substantially improve the secure transmission performance. Simulation results demonstrate that the proposed approach achieves a substantial improvement in average secrecy rate without increasing the payload of AAVs compared with the conventional methods.

DOI
10.1109/icc59461.2026.11588287

Related papers

A Robust Physical Layer Security Scheme Based on Collaborative Beamforming for UAV Networks with Jitter

Jiaxing Wang, Hengyan Xu, Xin Xie +3 more

Uncrewed aerial vehicles (UAVs) are expected to play a crucial role in future sixth-generation systems and low-altitude communication networks owing to their mobility, flexibility, and wide-range coverage capability. However, the predominance of line-of-sight channels makes UAV communications highly susceptible to eavesdropping, posing significant challenges for secure transmission. Distributed collaborative beamforming has emerged as a promising physical layer security technique for the UAV networks, but its performance is fundamentally constrained by the intrinsic jitter of UAV platforms, which is unavoidable in practical systems. In this paper, a physical layer security scheme is proposed for UAV networks based on collaborative beamforming technologies, within which distinct algorithms are designed according to whether the location of the eavesdropper (EAV) is known or unknown. When the location of the EAV is unknown, the theoretical secrecy performance of the proposed method is derived, and a beamforming strategy is constructed based on the properties of the generalized Rayleigh quotient for the situation of known location. Then, the average secrecy rate of the proposed collaborative beamforming scheme is derived under jitter conditions, and a robust beamforming method is further developed for the scenario in which the location of the EAV is known. Simulation results demonstrate that the average secrecy rate is dramatically improved by the proposed collaborative beamforming scheme compared to the conventional approaches, and a substantial secrecy performance gain is maintained in the presence of UAV jitter.

IEEE Journal of Selected Topics in Signal Processing•Jan 1, 2026•1 citation

Robust Cooperative Secure Beamforming Based on Multi-UAV Localization

Zeyuan Wang, Lin Bai, Jiaxing Wang +2 more

Low-altitude communication networks provide essential infrastructure for the rapidly developing low-altitude economy. However, the propagation environment poses significant challenges to transmission security. In this paper, a robust cooperative secure beamforming scheme is proposed for networks comprising multiple uncrewed aerial vehicles (UAVs), where a swarm of UAVs cooperatively transmits confidential information to a ground base station in the presence of a passive eaves-dropper (Eve). To address the difficulty in obtaining the Eve channel, we propose a localization method based on angle of arrival (AoA) estimation, and the corresponding Cramér-Rao lower bound (CRLB) of the localization error is derived for the multi-UAV cooperative localization system. Then, the localization uncertainty is modeled as an ellipsoidal region, and a robust beamforming optimization problem is formulated to maximize the average secrecy rate within the uncertainty region. Simulation results demonstrate that the proposed robust cooperative secure beamforming scheme achieves significant secrecy rate gains compared to conventional approaches under various system parameters.

IEEE/CIC International Conference on Communications in China (ICCC)•Aug 1, 2026•0 citations

Physical layer security in emerging wireless transmission systems

Tingnan Bao

Traditional cryptographic encryption techniques at higher layers require a certain form of information sharing between the transmitter and the legitimate user to achieve security. Besides, it also assumes that the eavesdropper has an insufficient computational capability to decrypt the ciphertext without the shared information. However, traditional cryptographic encryption techniques may be insufficient or even not suit- able in wireless communication systems. Physical layer security (PLS) can enhance the security of wireless communications by leveraging the physical nature of wireless transmission. Thus, in this thesis, we study the PLS performance in emerging wireless transmission systems. The thesis consists of two main parts. We first consider the PLS design and analysis for ground-based networks em- ploying random unitary beamforming (RUB) scheme at the transmitter. With RUB technique, the transmitter serves multiple users with pre-designed beamforming vectors, selected using limited channel state information (CSI). We study multiple-input single-output single-eavesdropper (MISOSE) transmission system, multi-user multiple-input multiple-output single-eavesdropper (MU-MIMOSE) transmission system, and massive multiple-input multiple-output multiple-eavesdropper (massive MI- MOME) transmission system. The closed-form expressions of ergodic secrecy rate and the secrecy outage probability (SOP) for these transmission scenarios are derived. Besides, the effect of artificial noise (AN) on secrecy performance of RUB-based transmission is also investigated. Numerical results are presented to illustrate the trade-off between performance and complexity of the resulting PLS design. We then investigate the PLS design and analysis for unmanned aerial vehicle (UAV)-based networks. We first study the secrecy performance of UAV-assisted relaying transmission systems in the presence of a single ground eavesdropper. We derive the closed-form expressions of ergodic secrecy rate and intercept probability. When multiple aerial and ground eavesdroppers are located in the UAV-assisted relaying transmission system, directional beamforming technique is applied to enhance the secrecy performance. Assuming the most general κ-μ shadowed fading channel, the SOP performance is obtained in the closed-form expression. Exploiting the derived expressions, we investigate the impact of different parameters on secrecy performance. Besides, we utilize a deep learning approach in UAV-based network analysis. Numerical results show that our proposed deep learning approach can predict secrecy performance with high accuracy and short running time.

•Jan 1, 2020•0 citations

Cooperative Jamming for Secure UAV Communications With Partial Eavesdropper Information

Yupeng Li, Rongqing Zhang, Jianhua Zhang +2 more

The broadcast nature of air-to-ground line-of-sight (LoS) wireless channel imposes a great challenge in secure unmanned aerial vehicle (UAV) communications. To address this issue, this paper investigates UAV-ground communications from the physical-layer security perspective. Specifically, the investigated scenario includes a UAV serving as the base station (BS) that transmits confidential signals to a legitimate ground user, and there are multiple eavesdroppers on the ground with unknown position information. To further enhance the secrecy performance of the UAV-ground communications, an idle UAV can be employed to serve as a friendly jammer, which can transmit jamming signals to confuse the eavesdroppers. In our proposed strategy, the flying trajectory and the transmit power for both the UAVs are jointly optimized by maximizing the worst-case secrecy rate (WCSR) of the system. Considering the intractability of the formulated non-convex problem, we further provide a block coordinate descent-based iterative optimization method. Simulations verify that our proposed algorithm can significantly improve the average WCSR in comparison with the existing works.

IEEE Access•Jan 1, 2019•85 citations

Secure Communications via Two-Phase Jamming Beamforming in UAV Relaying Networks

Xiaozheng Gao, Yalin Zhang, Qing Shen +4 more

This paper investigates secure communications between a pair of ground transceivers with the aid of a relay unmanned aerial vehicle (UAV). Specifically, we consider a powerful eavesdropper who conducts eavesdropping attacks in two transmission phases. The multi-antenna transmitter communicates with the UAV through information beamforming in Phase I, and the UAV relays the secrecy data through a single antenna to the receiver in Phase II. We propose a secure transmission scheme where the transmitter utilizes artificial noise technique to interfere with the eavesdropper through jamming beamforming in two phases. In particular, we formulate an optimization problem, and employ the max-min optimization, block coordinate descent, semi-definite relaxation, and successive convex approximation methods to deal with it. Simulation results verify the effectiveness and superiority of the proposed secure transmission scheme.

International Conference on Wireless Communications and Signal Processing (WCSP)•Oct 23, 2025•1 citation

Distributed beamforming designs to improve physical layer security in wireless relay networks

Mujun Qian, Chen Liu, Youhua Fu

Abstract This paper investigates security-oriented beamforming designs in a relay network composed of a source-destination pair, multiple relays, and a passive eavesdropper. Unlike most of the earlier works, we assume that only statistical information of the relay-eavesdropper channels is known to the relays. We propose beamforming solutions for amplify-and-forward (AF) and decode-and-forward (DF) relay networks to improve secrecy capacity. In an AF network, the beamforming design is obtained by approximating a product of two correlated Rayleigh quotients to a single Rayleigh quotient using the Taylor series expansion. Our study reveals that in an AF network, the secrecy capacity does not always grow as the eavesdropper moves away from the relays or as total relay transmit power increases. Moreover, if the destination is nearer to the relays than the eavesdropper is, a suboptimal power is derived in closed form through monotonicity analysis of secrecy capacity. While in a DF network, secrecy capacity is a single Rayleigh quotient problem which can be easily solved. We also found that if the relay-eavesdropper distances are about the same, it is unnecessary to consider the eavesdropper in a DF network. Numerical results show that for either AF or DF relaying protocol, the proposed beamforming scheme provides higher secrecy capacity than traditional approaches.

EURASIP Journal on Advances in Signal Processing•Apr 28, 2014•7 citations
With the development of the low-altitude economy, a large number of autonomous aerial vehicles (AAVs) will be deployed in low-altitude environments, capable of effectively performing data collection and relay tasks. Unlike non-line-of-sight transmission environments on the ground, the line-of-sight transmission of AAVs offers greater channel gain while facing a higher risk of data interception. Although the traditional encryption method can decrease the risk of data being cracked, it cannot diminish the probability of data being intercepted by eavesdroppers. In this paper, we propose a physical layer security method based on the distributed collaborative beamforming for the multi-AAV networks, in which both scenarios of known and unknown eavesdropper locations are considered. Then, two beamforming algorithms are designed for these scenarios. Besides, the theoretical performance is derived for the case where the location of the eavesdropper is known, while for the unknown-location case, a beamforming scheme based on the generalized Rayleigh quotient is introduced to substantially improve the secure transmission performance. Simulation results demonstrate that the proposed approach achieves a substantial improvement in average secrecy rate without increasing the payload of AAVs compared with the conventional methods.
Uncrewed aerial vehicles (UAVs) are expected to play a crucial role in future sixth-generation systems and low-altitude communication networks owing to their mobility, flexibility, and wide-range coverage capability. However, the predominance of line-of-sight channels makes UAV communications highly susceptible to eavesdropping, posing significant challenges for secure transmission. Distributed collaborative beamforming has emerged as a promising physical layer security technique for the UAV networks, but its performance is fundamentally constrained by the intrinsic jitter of UAV platforms, which is unavoidable in practical systems. In this paper, a physical layer security scheme is proposed for UAV networks based on collaborative beamforming technologies, within which distinct algorithms are designed according to whether the location of the eavesdropper (EAV) is known or unknown. When the location of the EAV is unknown, the theoretical secrecy performance of the proposed method is derived, and a beamforming strategy is constructed based on the properties of the generalized Rayleigh quotient for the situation of known location. Then, the average secrecy rate of the proposed collaborative beamforming scheme is derived under jitter conditions, and a robust beamforming method is further developed for the scenario in which the location of the EAV is known. Simulation results demonstrate that the average secrecy rate is dramatically improved by the proposed collaborative beamforming scheme compared to the conventional approaches, and a substantial secrecy performance gain is maintained in the presence of UAV jitter.
Low-altitude communication networks provide essential infrastructure for the rapidly developing low-altitude economy. However, the propagation environment poses significant challenges to transmission security. In this paper, a robust cooperative secure beamforming scheme is proposed for networks comprising multiple uncrewed aerial vehicles (UAVs), where a swarm of UAVs cooperatively transmits confidential information to a ground base station in the presence of a passive eaves-dropper (Eve). To address the difficulty in obtaining the Eve channel, we propose a localization method based on angle of arrival (AoA) estimation, and the corresponding Cramér-Rao lower bound (CRLB) of the localization error is derived for the multi-UAV cooperative localization system. Then, the localization uncertainty is modeled as an ellipsoidal region, and a robust beamforming optimization problem is formulated to maximize the average secrecy rate within the uncertainty region. Simulation results demonstrate that the proposed robust cooperative secure beamforming scheme achieves significant secrecy rate gains compared to conventional approaches under various system parameters.
Traditional cryptographic encryption techniques at higher layers require a certain form of information sharing between the transmitter and the legitimate user to achieve security. Besides, it also assumes that the eavesdropper has an insufficient computational capability to decrypt the ciphertext without the shared information. However, traditional cryptographic encryption techniques may be insufficient or even not suit- able in wireless communication systems. Physical layer security (PLS) can enhance the security of wireless communications by leveraging the physical nature of wireless transmission. Thus, in this thesis, we study the PLS performance in emerging wireless transmission systems. The thesis consists of two main parts. We first consider the PLS design and analysis for ground-based networks em- ploying random unitary beamforming (RUB) scheme at the transmitter. With RUB technique, the transmitter serves multiple users with pre-designed beamforming vectors, selected using limited channel state information (CSI). We study multiple-input single-output single-eavesdropper (MISOSE) transmission system, multi-user multiple-input multiple-output single-eavesdropper (MU-MIMOSE) transmission system, and massive multiple-input multiple-output multiple-eavesdropper (massive MI- MOME) transmission system. The closed-form expressions of ergodic secrecy rate and the secrecy outage probability (SOP) for these transmission scenarios are derived. Besides, the effect of artificial noise (AN) on secrecy performance of RUB-based transmission is also investigated. Numerical results are presented to illustrate the trade-off between performance and complexity of the resulting PLS design. We then investigate the PLS design and analysis for unmanned aerial vehicle (UAV)-based networks. We first study the secrecy performance of UAV-assisted relaying transmission systems in the presence of a single ground eavesdropper. We derive the closed-form expressions of ergodic secrecy rate and intercept probability. When multiple aerial and ground eavesdroppers are located in the UAV-assisted relaying transmission system, directional beamforming technique is applied to enhance the secrecy performance. Assuming the most general κ-μ shadowed fading channel, the SOP performance is obtained in the closed-form expression. Exploiting the derived expressions, we investigate the impact of different parameters on secrecy performance. Besides, we utilize a deep learning approach in UAV-based network analysis. Numerical results show that our proposed deep learning approach can predict secrecy performance with high accuracy and short running time.
The broadcast nature of air-to-ground line-of-sight (LoS) wireless channel imposes a great challenge in secure unmanned aerial vehicle (UAV) communications. To address this issue, this paper investigates UAV-ground communications from the physical-layer security perspective. Specifically, the investigated scenario includes a UAV serving as the base station (BS) that transmits confidential signals to a legitimate ground user, and there are multiple eavesdroppers on the ground with unknown position information. To further enhance the secrecy performance of the UAV-ground communications, an idle UAV can be employed to serve as a friendly jammer, which can transmit jamming signals to confuse the eavesdroppers. In our proposed strategy, the flying trajectory and the transmit power for both the UAVs are jointly optimized by maximizing the worst-case secrecy rate (WCSR) of the system. Considering the intractability of the formulated non-convex problem, we further provide a block coordinate descent-based iterative optimization method. Simulations verify that our proposed algorithm can significantly improve the average WCSR in comparison with the existing works.
This paper investigates secure communications between a pair of ground transceivers with the aid of a relay unmanned aerial vehicle (UAV). Specifically, we consider a powerful eavesdropper who conducts eavesdropping attacks in two transmission phases. The multi-antenna transmitter communicates with the UAV through information beamforming in Phase I, and the UAV relays the secrecy data through a single antenna to the receiver in Phase II. We propose a secure transmission scheme where the transmitter utilizes artificial noise technique to interfere with the eavesdropper through jamming beamforming in two phases. In particular, we formulate an optimization problem, and employ the max-min optimization, block coordinate descent, semi-definite relaxation, and successive convex approximation methods to deal with it. Simulation results verify the effectiveness and superiority of the proposed secure transmission scheme.
Abstract This paper investigates security-oriented beamforming designs in a relay network composed of a source-destination pair, multiple relays, and a passive eavesdropper. Unlike most of the earlier works, we assume that only statistical information of the relay-eavesdropper channels is known to the relays. We propose beamforming solutions for amplify-and-forward (AF) and decode-and-forward (DF) relay networks to improve secrecy capacity. In an AF network, the beamforming design is obtained by approximating a product of two correlated Rayleigh quotients to a single Rayleigh quotient using the Taylor series expansion. Our study reveals that in an AF network, the secrecy capacity does not always grow as the eavesdropper moves away from the relays or as total relay transmit power increases. Moreover, if the destination is nearer to the relays than the eavesdropper is, a suboptimal power is derived in closed form through monotonicity analysis of secrecy capacity. While in a DF network, secrecy capacity is a single Rayleigh quotient problem which can be easily solved. We also found that if the relay-eavesdropper distances are about the same, it is unnecessary to consider the eavesdropper in a DF network. Numerical results show that for either AF or DF relaying protocol, the proposed beamforming scheme provides higher secrecy capacity than traditional approaches.