Noisy Intermediate-Scale Quantum (NISQ) devices show great promise for quantum advantage via Parametrized Quantum Circuits (PQCs) and Variational Quantum Algorithms (VQAs). Due to hardware imperfections, however, especially barren plateaus and environmental Pauli noise, the cost landscape is highly distorted, resulting in inaccurate classical optimization during training. To overcome these challenges, a robust quantum gradient descent framework is presented with the integration of error mitigation directly within the optimization loop. A noise-resilient parameter-shift rule is defined and modeled analytically, as is a variant of stochastic gradient descent with real-time Pauli noise mitigation. The framework is based on a 6-qubit system, which is tested on the Max-Cut problem in the presence of different amounts of depolarizing noise. It is shown experimentally that the proposed algorithm is able to achieve the final cost error of 0.045 under significant noise, whereas the standard quantum gradient descent fails to achieve better than 0.320 under this noise. Moreover, the methodology is consistent, converging without a noise-induced flat landscape and without local minima. The method offers a scalable route towards future applications of quantum machine learning on non-fault-tolerant hardware that does not suffer from the large sampling overhead often associated with conventional error mitigation techniques.
Noisy Intermediate-Scale Quantum (NISQ) devices show great promise for quantum advantage via Parametrized Quantum Circuits (PQCs) and Variational Quantum Algorithms (VQAs). Due to hardware imperfections, however, especially barren plateaus and environmental Pauli noise, the cost landscape is highly distorted, resulting in inaccurate classical optimization during training. To overcome these challenges, a robust quantum gradient descent framework is presented with the integration of error mitigation directly within the optimization loop. A noise-resilient parameter-shift rule is defined and modeled analytically, as is a variant of stochastic gradient descent with real-time Pauli noise mitigation. The framework is based on a 6-qubit system, which is tested on the Max-Cut problem in the presence of different amounts of depolarizing noise. It is shown experimentally that the proposed algorithm is able to achieve the final cost error of 0.045 under significant noise, whereas the standard quantum gradient descent fails to achieve better than 0.320 under this noise. Moreover, the methodology is consistent, converging without a noise-induced flat landscape and without local minima. The method offers a scalable route towards future applications of quantum machine learning on non-fault-tolerant hardware that does not suffer from the large sampling overhead often associated with conventional error mitigation techniques.
Variational quantum algorithms (VQAs) have attracted a lot of attention from the quantum computing community for the last few years. Their hybrid quantum-classical nature with relatively shallow quantum circuits makes them a promising platform for demonstrating the capabilities of noisy intermediate scale quantum (NISQ) devices. Although the classical machine learning community focuses on gradient-based parameter optimization, finding near-exact gradients for variational quantum circuits (VQCs) with the parameter-shift rule introduces a large sampling overhead. Therefore, gradient-free optimizers have gained popularity in quantum machine learning circles. Among the most promising candidates is the simultaneous perturbation stochastic approximation (SPSA) algorithm, due to its low computational cost and inherent noise resilience. We introduce a novel approach that uses the approximated gradient from SPSA in combination with state-of-the-art gradient-based classical optimizers. We demonstrate numerically that this out-performs both standard SPSA and the parameter-shift rule in terms of convergence rate and absolute error in simple regression tasks. The improvement of our novel approach over SPSA with stochastic gradient descent (SGD) is even amplified when shot- and hardware-noise are taken into account. We also demonstrate that error mitigation does not significantly affect our results.
Parameterized quantum circuits (PQCs) play an essential role in the application of variational quantum algorithms (VQAs) in noisy intermediate-scale quantum (NISQ) devices. The PQCs are a leading candidate to achieve a quantum advantage in NISQ devices and have already been applied in various domains such as quantum chemistry, quantum machine learning, combinatorial optimization, and many others. There is no single definitive way to optimize PQCs. The most commonly used methods are based on computing the gradient via the parameter-shift rule to use classical gradient descent (GD) optimizers like Adam, stochastic GD, and others. In addition, sequential single-qubit optimizers have been proposed, such as Rotosolve, Free-Axis Selection (Fraxis), Free-Quaternion Selection (FQS), and hybrid algorithms from the aforementioned optimizers. We further develop hybrid algorithms than those represented in the previous work by drawing inspiration from the early stopping method used in classical machine learning. The switch between the optimizers depends on the previous cost function values compared to the previous ones. We introduce two new hybrid algorithms that are more robust and scalable, and they outperform previous hybrid methods in terms of convergence towards the global minima across various cost functions. In addition, we find that they are feasible for NISQ devices with different noise profiles.
Abstract Variational Quantum Algorithms (VQAs) are widely regarded as the most promising route to practical quantum advantage on Noisy Intermediate-Scale Quantum (NISQ) hardware, but their trainability is threatened by the barren plateau phenomenon, in which cost-function gradients vanish exponentially with system size and circuit depth. Standard first-order optimizers, which treat the parameter space of a parameterized quantum circuit (PQC) as flat Euclidean space, are especially vulnerable to this effect and to the additional gradient suppression introduced by hardware noise. This extended treatment presents (i) a from-first-principles derivation of Quantum Natural Gradient (QNG) descent, tracing its lineage from Amari's classical information geometry [1] through the Fubini-Study metric to the Quantum Fisher Information Matrix (QFIM); (ii) a complete taxonomy of barren-plateau mechanisms (expressibility-induced, entanglement-induced, cost-function-locality-induced, and noise-induced); (iii) a comparative survey of the broader NISQ optimizer landscape (SPSA, Adam, COBYLA, Rotosolve, Quantum Natural SPSA, and reduced-cost QFIM estimators); and (iv) a controlled simulation study comparing QNG against vanilla gradient descent on a 4-qubit weighted MaxCut problem under three physically motivated NISQ noise models. Across 50 independent trials, QNG raised the convergence success rate from 30% to 95%, reduced the mean iteration count to convergence by a factor of roughly 6, and achieved a 16% net wall-clock speedup despite the added per-iteration cost of QFIM estimation. We give the full theoretical basis for these gains, an exhaustive discussion of their limitations, an A-to-Z glossary of the field's terminology, and a staged roadmap toward physical hardware validation. Figure placements throughout the document are annotated with detailed image-generation prompts so that the accompanying visual assets can be produced independently of this text.
The execution of Variational Quantum Algorithms on Noisy Intermediate-Scale Quantum hardware is severely impacted by hardware noise variations over time and decoherence. This work introduces an Adaptive Noise-Aware Variational Quantum Classifier (ANAVQC) that integrates Zero-Noise Extrapolation (ZNE) dynamically into the training loop to counter variations. The framework approximates the instantaneous depolarizing noise from calibration and adapts noise scaling and linear extrapolation to estimate noise-free expectation values at training. A two-qubit parameterized quantum circuit is built and simulated in MATLAB, with the inclusion of stochastic gradient descent coupled with parameter-shift-based gradients. The model is conditioned on a synthetic binary classification data under a time-varying depolarizing noise profile and exhibits improved convergence stability and classification accuracy over non-adaptive methods. The simulation results identify that adaptive ZNE increases model robustness against time-varying noise and offers a scalable route to reliable quantum machine learning on practical NISQ hardware. The current ANAVQC scheme is extendable to multi-qubit platforms and practical quantum backends for the purposes of future experimental testing.
Abstract Noisy Intermediate-Scale Quantum (NISQ) devices are near-term quantum computing devices that inherently suffer from imperfect gate implementation, decoherence, and measurement noise. The main type of variational quantum algorithms(VQAs) is based on Parameterized Quantum Circuits (PQCs), which, however, face practical challenges due to optimization instability of optimization caused by noise and reduced performance. In this paper, we suggest a comprehensive noise-resilient optimization framework for PQCs, which explicitly incorporates noise-resilient circuit architecture design, incorporating noise-aware training strategies into the variational optimization loop. The framework uses circuit structures that are efficient in depth and are hardware compatible in addition to adaptive optimizer choice, stochastic optimization, and averaging as a part of repeated measurement to reduce the impacts of realistic noise. Large-scale experiments are performed with different amounts of qubits, depths of the circuit and noise strengths with realistic noise models. The findings indicate that the convergence rate is faster, the stability is increased, the variability of run-to-run variability is minimized, and other robustness is better than the noise-unaware optimization techniques. Moreover, systematic studies determine optimal operating regions that optimally trade-off expressibility and noise tolerance to offer useful design advice on trusted implementation of VQAs with near-term quantum hardware.
Abstract The arrival of noisy intermediate-scale quantum (NISQ) devices defines an era in which quantum utility is fundamentally constrained by finite coherence times, limited qubit counts, gate infidelities, restricted connectivity, and measurement noise. Within this regime, hybrid quantum-classical frameworks have emerged as the dominant operational paradigm, particularly for quantum machine learning (QML). This review identifies a fundamental trade-off between expressivity, trainability, and noise resilience that governs the performance and scalability of NISQ-era QML systems. To contextualize these challenges, we introduce the resource-constrained iterative routing framework, a hardware-aware conceptual architecture that integrates topology-aware classical compression and distributed quantum orchestration to maintain circuit depths within device-dependent limits while routing representations toward symmetry-constrained Hilbert subspaces to mitigate noise-induced barren plateaus. Furthermore, we shift the discussion of quantum advantage away from asymptotic fault-tolerant complexity toward the notion of operational NISQ advantage based on finite-resource scaling, trainability preservation, and sampling complexity. We evaluate the practical resource efficiency of variational quantum algorithms, quantum kernel methods, and quantum neural networks across superconducting, trapped-ion, neutral-atom, and photonic platforms. The review also examines reproducibility challenges, emphasizing benchmarking against optimized classical baselines, and discusses strategies for managing the sampling overhead of error mitigation alongside distributed execution and quantum circuit compilation. Ultimately, NISQ in Practice positions hybrid QML as a physically constrained computational paradigm while outlining a pathway from contemporary noisy workflows toward early fault-tolerant quantum architectures.