Variational quantum algorithms (VQAs) offer the most promising path to obtaining quantum advantages via noisy intermediate-scale quantum (NISQ) processors. Such systems leverage classical optimization to tune the parameters of a parameterized quantum circuit (PQC). The goal is minimizing a cost function that depends on measurement outputs obtained from the PQC. Optimization is typically implemented via stochastic gradient descent (SGD). On NISQ computers, gate noise due to imperfections and decoherence affects the stochastic gradient estimates by introducing a bias. Quantum error mitigation (QEM) techniques can reduce the estimation bias without requiring any increase in the number of qubits, but they in turn cause an increase in the variance of the gradient estimates. This work studies the impact of quantum gate noise on the convergence of SGD for the variational eigensolver (VQE), a fundamental instance of VQAs. The main goal is ascertaining conditions under which QEM can enhance the performance of SGD for VQEs. It is shown that quantum gate noise induces a nonzero error-floor on the convergence error of SGD (evaluated with respect to a reference noiseless PQC), which depends on the number of noisy gates, the strength of the noise, as well as the eigenspectrum of the observable being measured and minimized. In contrast, with QEM, any arbitrarily small error can be obtained. Furthermore, for error levels attainable with or without QEM, QEM can reduce the number of required iterations, but only as long as the quantum noise level is sufficiently large, and a sufficiently large number of measurements is allowed at each SGD iteration. Numerical examples for a max-cut problem corroborate the main theoretical findings.
Variational quantum algorithms (VQAs) offer the most promising path to obtaining quantum advantages via noisy intermediate-scale quantum (NISQ) processors. Such systems leverage classical optimization to tune the parameters of a parameterized quantum circuit (PQC). The goal is minimizing a cost function that depends on measurement outputs obtained from the PQC. Optimization is typically implemented via stochastic gradient descent (SGD). On NISQ computers, gate noise due to imperfections and decoherence affects the stochastic gradient estimates by introducing a bias. Quantum error mitigation (QEM) techniques can reduce the estimation bias without requiring any increase in the number of qubits, but they in turn cause an increase in the variance of the gradient estimates. This work studies the impact of quantum gate noise on the convergence of SGD for the variational eigensolver (VQE), a fundamental instance of VQAs. The main goal is ascertaining conditions under which QEM can enhance the performance of SGD for VQEs. It is shown that quantum gate noise induces a nonzero error-floor on the convergence error of SGD (evaluated with respect to a reference noiseless PQC), which depends on the number of noisy gates, the strength of the noise, as well as the eigenspectrum of the observable being measured and minimized. In contrast, with QEM, any arbitrarily small error can be obtained. Furthermore, for error levels attainable with or without QEM, QEM can reduce the number of required iterations, but only as long as the quantum noise level is sufficiently large, and a sufficiently large number of measurements is allowed at each SGD iteration. Numerical examples for a max-cut problem corroborate the main theoretical findings.
Abstract Noisy Intermediate-Scale Quantum (NISQ) devices are near-term quantum computing devices that inherently suffer from imperfect gate implementation, decoherence, and measurement noise. The main type of variational quantum algorithms(VQAs) is based on Parameterized Quantum Circuits (PQCs), which, however, face practical challenges due to optimization instability of optimization caused by noise and reduced performance. In this paper, we suggest a comprehensive noise-resilient optimization framework for PQCs, which explicitly incorporates noise-resilient circuit architecture design, incorporating noise-aware training strategies into the variational optimization loop. The framework uses circuit structures that are efficient in depth and are hardware compatible in addition to adaptive optimizer choice, stochastic optimization, and averaging as a part of repeated measurement to reduce the impacts of realistic noise. Large-scale experiments are performed with different amounts of qubits, depths of the circuit and noise strengths with realistic noise models. The findings indicate that the convergence rate is faster, the stability is increased, the variability of run-to-run variability is minimized, and other robustness is better than the noise-unaware optimization techniques. Moreover, systematic studies determine optimal operating regions that optimally trade-off expressibility and noise tolerance to offer useful design advice on trusted implementation of VQAs with near-term quantum hardware.
Variational quantum algorithms have promising applications in noisy intermediate-scale quantum (NISQ) devices. These algorithms rely on a classical optimization outer loop that minimizes a parameterized quantum circuit function. The optimization in variational quantum eigensolver (VQE) is NP-hard, meaning that finding the optimal solution is infeasible in the worst-case scenario. One way to address this challenge is through parallel optimization of parameters using multiple-parameterized quantum circuits. However, this approach is unsuitable for cloud-based quantum processing unit utilization due to the increased number of quantum circuit executions. Although NISQ devices have limitations in terms of gate depth, their size has been growing in recent years. Therefore, implementing multiple-parameterized quantum circuits in NISQ devices can suppress the increase in the number of executions. In this study, we propose a parallel-VQE, which leverages the parallel execution of parameterized quantum circuits to perform parallel parameter optimization in VQE, achieving convergence to solutions closer to the ground state. We validate the effectiveness of parallel-VQE in solving the random weighted max-cut problem using numerical simulations and a real quantum device. We present the results of running up to six circuits in parallel (120 qubits) and demonstrate the advantages of using multiple units to improve computational accuracy. This study provides a potential method for solving eigenvalue problems and combinatorial optimization problems for future quantum devices.
Parameterized quantum circuits (PQCs) are pivotal components of variational quantum algorithms (VQAs), which represent a promising pathway to quantum advantage in noisy intermediate-scale quantum (NISQ) devices. PQCs enable flexible encoding of quantum information through tunable quantum gates and have been successfully applied across domains such as quantum chemistry, combinatorial optimization, and quantum machine learning. Despite their potential, PQC performance on NISQ hardware is hindered by noise, decoherence, and the presence of barren plateaus, which can impede gradient-based optimization. To address these limitations, we propose novel methods for improving gradient-free optimizers Rotosolve, Fraxis, and FQS, incorporating information from previous parameter iterations. Our approach conserves computational resources by reallocating optimization efforts toward poorly optimized gates, leading to improved convergence. The experimental results demonstrate that our techniques consistently improve the performance of various optimizers, contributing to more robust and efficient PQC optimization.
Parameterized quantum circuits (PQCs) play an essential role in the application of variational quantum algorithms (VQAs) in noisy intermediate-scale quantum (NISQ) devices. The PQCs are a leading candidate to achieve a quantum advantage in NISQ devices and have already been applied in various domains such as quantum chemistry, quantum machine learning, combinatorial optimization, and many others. There is no single definitive way to optimize PQCs. The most commonly used methods are based on computing the gradient via the parameter-shift rule to use classical gradient descent (GD) optimizers like Adam, stochastic GD, and others. In addition, sequential single-qubit optimizers have been proposed, such as Rotosolve, Free-Axis Selection (Fraxis), Free-Quaternion Selection (FQS), and hybrid algorithms from the aforementioned optimizers. We further develop hybrid algorithms than those represented in the previous work by drawing inspiration from the early stopping method used in classical machine learning. The switch between the optimizers depends on the previous cost function values compared to the previous ones. We introduce two new hybrid algorithms that are more robust and scalable, and they outperform previous hybrid methods in terms of convergence towards the global minima across various cost functions. In addition, we find that they are feasible for NISQ devices with different noise profiles.
Variational Quantum Algorithms (VQAs) are a class of hybrid quantum-classical algorithms that leverage on classical optimization tools to find the optimal parameters for a parameterized quantum circuit. One relevant application of VQAs is the Variational Quantum Eigensolver (VQE), which aims at steering the output of the quantum circuit to the ground state of a certain Hamiltonian. Recent works have provided global convergence guarantees for VQEs under suitable local surjectivity and smoothness hypotheses, but little has been done in characterizing convergence of these algorithms when the underlying quantum circuit is affected by noise. In this work, we derive an upper bound on the error on the optimal parameters of a VQE under the effect of different coherent and incoherent noise processes. We then procced to show robust convergence guarantees of the algorithm to the perturbed optimal parameters. Our work provides novel theoretical insight into the behavior of VQAs subject to noise. Furthermore, we accompany our results with numerical simulations implemented via Pennylane.
Noisy Intermediate-Scale Quantum (NISQ) devices show great promise for quantum advantage via Parametrized Quantum Circuits (PQCs) and Variational Quantum Algorithms (VQAs). Due to hardware imperfections, however, especially barren plateaus and environmental Pauli noise, the cost landscape is highly distorted, resulting in inaccurate classical optimization during training. To overcome these challenges, a robust quantum gradient descent framework is presented with the integration of error mitigation directly within the optimization loop. A noise-resilient parameter-shift rule is defined and modeled analytically, as is a variant of stochastic gradient descent with real-time Pauli noise mitigation. The framework is based on a 6-qubit system, which is tested on the Max-Cut problem in the presence of different amounts of depolarizing noise. It is shown experimentally that the proposed algorithm is able to achieve the final cost error of 0.045 under significant noise, whereas the standard quantum gradient descent fails to achieve better than 0.320 under this noise. Moreover, the methodology is consistent, converging without a noise-induced flat landscape and without local minima. The method offers a scalable route towards future applications of quantum machine learning on non-fault-tolerant hardware that does not suffer from the large sampling overhead often associated with conventional error mitigation techniques.