This thesis contains several theoretical studies on optomechanical systems, i.e. physical devices where mechanical degrees of freedom are coupled with optical cavity modes. This optomechanical interaction, mediated by radiation pressure, can be exploited for cooling and controlling mechanical resonators in a quantum regime. The goal of this thesis is to propose several new ideas for preparing meso- scopic mechanical systems (of the order of 10^15 atoms) into highly non-classical states. In particular we have shown new methods for preparing optomechani-cal pure states, squeezed states and entangled states. At the same time, proce-dures for experimentally detecting these quantum effects have been proposed. In particular, a quantitative measure of non classicality has been defined in terms of the negativity of phase space quasi-distributions. An operational al- gorithm for experimentally estimating the non-classicality of quantum states has been proposed and successfully applied in a quantum optics experiment. The research has been performed with relatively advanced mathematical tools related to differential equations with periodic coefficients, classical and quantum Bochner’s theorems and semidefinite programming. Nevertheless the physics of the problems and the experimental feasibility of the results have been the main priorities.
This thesis contains several theoretical studies on optomechanical systems, i.e. physical devices where mechanical degrees of freedom are coupled with optical cavity modes. This optomechanical interaction, mediated by radiation pressure, can be exploited for cooling and controlling mechanical resonators in a quantum regime. The goal of this thesis is to propose several new ideas for preparing meso- scopic mechanical systems (of the order of 10^15 atoms) into highly non-classical states. In particular we have shown new methods for preparing optomechani-cal pure states, squeezed states and entangled states. At the same time, proce-dures for experimentally detecting these quantum effects have been proposed. In particular, a quantitative measure of non classicality has been defined in terms of the negativity of phase space quasi-distributions. An operational al- gorithm for experimentally estimating the non-classicality of quantum states has been proposed and successfully applied in a quantum optics experiment. The research has been performed with relatively advanced mathematical tools related to differential equations with periodic coefficients, classical and quantum Bochner’s theorems and semidefinite programming. Nevertheless the physics of the problems and the experimental feasibility of the results have been the main priorities.
In a nutshell, a cavity optomechanical system consists of a mechanical oscillator inside an optical cavity. Cavity optomechanics studies the interplay between the light-matter radiation-pressure interaction and the change in the cavity frequency induced by mechanical motion. By leveraging the tools of quantum optics and quantum measurement, cavity quantum optomechanics enables the engineering of nonclassical quantum states of bulk matter. In this thesis, I present protocols for engineering such nonclassical quantum states in Part II. First, I introduce a scheme to ‘grow’ a quantum kitten state of a mechanical oscillator into a macroscopic Schrödinger cat state using a series of nonlinear pulsed optomechanical interactions. Next, I detail our proposed schemes to generate and verify entanglement between two mechanical oscillators. Moving on from pulsed optomechanics, I describe the theory behind an experiment that achieved multi-phonon subtraction from a mechanical oscillator in a continuously driven Brillouin optomechanical system. In the final chapter of Part II, I provide a theoretical preview of an experiment that investigates the behaviour of the mechanical oscillator when no light is detected at the output. In Part III, I introduce a new framework for nonlinear cavity quantum optomechanics that incorporates the intrinsic nonlinearity of the radiation-pressure interaction, the nonlinearity from the cavity enhancement, and higher-order mechanical position terms in the expansion of the cavity frequency. I then propose a scheme for measuring mechanical position using general-dyne detection, applicable to pulsed and continuous measurements. This predicts a new regime of operation, the “stochastic Gaussian” regime. Finally, I discuss a protocol for deterministic mechanical squeezing that utilizes the cavity response.
The search for experimental demonstrations of the quantum behavior of macroscopic mechanical resonators is a fastly growing field of investigation and recent results suggest that the generation of quantum states of resonators with a mass at the microgram scale is within reach. In this chapter we give an overview of two important topics within this research field: cooling to the motional ground state, and the generation of entanglement involving mechanical, optical and atomic degrees of freedom. We focus on optomechanical systems where the resonator is coupled to one or more driven cavity modes by the radiation pressure interaction. We show that robust stationary entanglement between the mechanical resonator and the output fields of the cavity can be generated, and that this entanglement can be transferred to atomic ensembles placed within the cavity. These results show that optomechanical devices are interesting candidates for the realization of quantum memories and interfaces for continuous variable quantum communication networks.
In this dissertation, I theoretically investigate the open system dynamics of cavity optomechanical systems in the quantum limit, where a mechanical resonator couples to a cavity mode via radiation pressure force. Recent developments in nano-fabrication and cooling techniques make it possible to optically control and manipulate the motion of micro- and nano-mechanical resonator. Several experiments have demonstrated the possibility of preparing macroscopic mechanical resonators into their quantum ground state, which makes optomechanical systems an ideal candidate for studying the quantum behavior of macroscopic objects. One important direction in quantum optomechanics is the study of the decoherence of optomechanical system due to the interaction with their external environments. This dissertation explores the decoherence effects by considering the influence of the radiation pressure coupling on the interaction between optomechanical system and its environments. Because the effects of the nonlinear interaction vary with the optomechanical coupling strength, three different interaction regimes are fully studied here: the weak coupling, the intermediate coupling and the strong coupling.
In the field of optomechanics, one typically studies the interaction of a single mechanical resonator and a single optical cavity mode. In this thesis, we investigate collective quantum effects in optomechanical systems with two or more optical and mechanical modes. First, we study the generation and destruction of entanglement between two mechanical resonators effected by optical cavity fields. We also describe how the optomechanical interaction can be employed to mediate strong coherent coupling and entanglement between a micromechanical membrane and a single atom. Secondly, we show that a configuration with two optical and a single mechanical mode can lead to enhanced nonlinear interactions, which can be exploited for quantum non-demolition measurements of the phonon and photon numbers. Finally, we explore the quantum many-body dynamics of optomechanical arrays. In particular, we research into the transition from a disordered state due to quantum noise to a state with phasecoherent mechanical oscillations. As an intermediate step towards this study, we also investigate the nonlinear classical dynamics of single- and multi-mode optomechanical setups and compare theoretical predictions to experimental data.
This thesis concentrates on generating and measuring non-classical states of mechanical oscillators by coupling them to atomic and molecular quantum systems. We start with a discussion of what novel physics can be explored by mechanical systems operating in the quantum regime. We then discuss one technique making it a possibility- cavity optomechanics, particularly optomechanical cooling. We investigate the limits of optomechanical cooling and review how the coupling of mechanical oscillators to external heat baths limits the minimum attainable phonon occupation number. As a possible alternative for circumventing clamping losses, we consider an all-optical approach where the mechanical element (in this case, a Bragg mirror) is suspended via optical forces, and discuss some limitations of this approach. We explore several schemes aimed at the generation of quantum states in mechanical oscillators. We consider specifically two examples: one in which the mechanical oscillator is coupled to polar molecules via dipole-dipole interaction, and another where it is magnetically coupled to a Bose condensate. The first example emphasizes that such an interaction can generate parametric squeezing and entanglement. The second scheme demonstrates that the back action of BEC spin measurements can be used to generate quantum states of motion of a mechanical oscillator. We then discuss possible methods for measuring the entire density matrix of a mechanical oscillator. The first method achieves the tomographic reconstruction of the mechanical Wigner function by coupling it simultaneously to a classical optical oscillator and a qubit. The second approach involves a state transfer scheme between momentum excitations of a bose-condensate in a cavity and a moving mirror of the cavity that is entirely mediated by the light field. We conclude with a discussion of the broader implications of this work, and some future research directions.
Quantum opto-mechanics is a fast moving, broad research field which aims to investigate and control the interaction of light and the quantized motion of mechanical objects and the coupling between them. This allows one to engineer the mechanical quantum state by controlling and measuring the electromagnetic field, and conversely, to control the dynamical evolution of the optical field via its interaction with a mechanical system. Mechanical resonators are accessible in many different shapes and sizes, from kilogram scales in experiments that test gravitational theories to micro- and nano-scales in resolved sideband regime, where the frequency of the mechanical resonator is larger than the bandwidth of the optical cavity. In this regime, it is possible to cool the mechanical object to the ground state which allows a high degree of control and the ability to prepare interesting non-classical states, states that could aid in investigating the quantum dynamics of macroscopic objects. The field of quantum opto-mechanics is a promising testbed for quantum control technologies, such as fundamental tests of quantum mechanics, ultra-sensitive quantum sensors for precise measurements, phonon lasing, mechanical memories with long lifetime and quantum information processing. Furthermore, experiments are progressing toward strong opto-mechanical coupling regimes with single photons. This creates a platform that can take advantage of the nonlinear optical interactions to generate highly non-classical states in such light-matter interfaces. Photonic systems working in the single photon regime will be promising for low power applications and also for implementations of quantum information and computation. Motivated by these applications, this thesis consists of theoretical studies in the context of single photonics. This includes investigating non-classical mechanical state generation and mechanically controlling the dynamical evolution of optical fields in the strong coupling regime single photon opto-mechanics and furthermore, proposing a quantum sensor using single photonics. In this regard, we employ three important formalisms to treat and measure open quantum systems with non-Gaussian input fields: the conditional and unconditional cascaded master equations, Fock-state master equations and input-output Langevin equations. In the context of opto-mechanics, the system to be investigated is composed of two optical cavities with a coupling modulated via a mechanical resonator. In one case, a sequence of single photons are irreversibly sent to one of the optical cavities. After photons go through the opto-mechanical interaction, photon counting measurements are performed on the cavity output, conditionally steering the mechanical state to a highly non-classical Fock state. Numerical calculations are performed to predict the experimental parameters needed to generate a mechanical Fock state before the mechanical object is thermalized. In another case, the same opto-mechanical scheme is employed to conversely modify the state of the optical mode by engineering the state of the mechanical degree of freedom. In this case, it is shown that the opto-mechanical system operates as an effective beam splitter for the input single photons, with a transmission that can be controlled by tuning the number of excitations in the bulk mechanical resonator. When the mechanical resonator has a small coherent amplitude it acts as a quantum control, entangling the optical and mechanical degrees of freedom. As the coherent amplitude of the resonator increases, it acts as a classical control for the input photons. Finally, we propose a novel multi-purpose sensor architecture that can be used for force, refractive index and possibly local temperature detection. In this scheme, two coupled cavities behave as an effective beam splitter. This sensor is based on fourth order interference (the Hong-Ou-Mandel effect) and requires a sequence of single photon pulses and consequently has low pulse power. Changes in the parameter to be measured induce variations in the effective beam splitter reflectivity and result in changes to the visibility of interference. We propose that this generic scheme could be implemented with coupled L3 photonic crystal cavities and find that this system, which only relies on photon coincidence detection and does not need any spectral resolution, can estimate forces as small as 10-7 Newtons and can measure one part per million change in refractive index using a very low input power of 10-10 W.