!Non-binary low density parity check (NB-LDPC) codes are known to have higher correction capability than their binary counterparts, low density parity check (LDPC) codes. The latest technique for analyzing NB-LDPC codes is to measure generalized girth. The generalized girth cannot be measured in a binary LDPC code, and can be considered an indicator for measuring the performance of NB-LDPC code. In this paper, we propose a new analysis method to represent NB-LDPC code as a graph. This graph is called a permutation graph. In this paper, we present and prove a reasoning for analyzing generalized girth using the permutation graph. This is a faster and simpler method than the existing generalized girth analysis method. The proposed code construction algorithm constructs NB-LDPC codes to have an arbitrary generalized girth length. Because the permutation graph-based analysis is applied, which is more effective than existing methods, the complexity of code construction is significantly reduced. This enables more efficient code construction. The decoding simulations show that the proposed method improves the correction performance of NB-LDPC codes compared to the existing state-of-the-art.
!Non-binary low density parity check (NB-LDPC) codes are known to have higher correction capability than their binary counterparts, low density parity check (LDPC) codes. The latest technique for analyzing NB-LDPC codes is to measure generalized girth. The generalized girth cannot be measured in a binary LDPC code, and can be considered an indicator for measuring the performance of NB-LDPC code. In this paper, we propose a new analysis method to represent NB-LDPC code as a graph. This graph is called a permutation graph. In this paper, we present and prove a reasoning for analyzing generalized girth using the permutation graph. This is a faster and simpler method than the existing generalized girth analysis method. The proposed code construction algorithm constructs NB-LDPC codes to have an arbitrary generalized girth length. Because the permutation graph-based analysis is applied, which is more effective than existing methods, the complexity of code construction is significantly reduced. This enables more efficient code construction. The decoding simulations show that the proposed method improves the correction performance of NB-LDPC codes compared to the existing state-of-the-art.
Non-binary low-density parity-check (NB-LDPC) codes are known to offer several advantages over their binary counterparts, but the higher complexity, and the resource-hungry nature of decoding algorithms have so far restricted their practical usage. In this paper, we propose a new decoding algorithm for NB-LDPC codes over finite fields of characteristic 2, based on a novel binary expansion of the Q-ary Tanner graph. While it offers substantial complexity gains, simulation results demonstrate that the performance loss of the new algorithm, in comparison to the best known decoder, is quite small. Furthermore, due to being based on a binary graph, it is particularly attractive for hardware implementations. We also suggest a simplified version of the algorithm, which offers even higher gains in complexity.
Low-density parity-check (LDPC) codes have been shown to have good error correcting performance approaching Shannon’s limit. Good error correcting performance enables efficient and reliable communication. However, a LDPC code decoding algorithm needs to be executed efficiently to meet cost, time, power and bandwidth requirements of target applications. The constructed codes should also meet error rate performance requirements of those applications. Since their rediscovery, there has been much research work on LDPC code construction and implementation. LDPC codes can be designed over a wide space with parameters such as girth, rate and length. There is no unique method of constructing LDPC codes. Existing construction methods are limited in some way in producing good error correcting performing and easily implementable codes for a given rate and length. There is a need to develop methods of constructing codes over a wide range of rates and lengths with good performance and ease of hardware implementability. LDPC code hardware design and implementation depend on the structure of target LDPC code and is also as varied as LDPC matrix designs and constructions. There are several factors to be considered including decoding algorithm computations,processing nodes interconnection network, number of processing nodes, amount of memory, number of quantization bits and decoding delay. All of these issues can be handled in several different ways. \nThis thesis is about construction of LDPC codes and their hardware implementation. LDPC code construction and implementation issues mentioned above are too many to be addressed in one thesis. The main contribution of this thesis is the development of LDPC code construction methods for some classes of structured LDPC codes and techniques for reducing decoding time. We introduce two main methods for constructing structured codes. In the first method, column-weight two LDPC codes are derived from distance graphs. A wide range of girths, rates and lengths are obtained compared to existing methods. The performance and implementation complexity of obtained codes depends on the structure of their corresponding distance graphs. In the second method, a search algorithm based on bit-filing and progressive-edge growth algorithms is introduced for constructing quasi-cyclic LDPC codes. The algorithm can be used to form a distance or Tanner graph of a code. This method could also obtain codes over a wide range of parameters. Cycles of length four are avoided by observing the row-column constraint. \nRow-column connections observing this condition are searched sequentially or randomly. Although the girth conditions are not sufficient beyond six, larger girths codes were easily obtained especially at low rates. The advantage of this algorithm compared to other methods is its flexibility. It could be used to construct codes for a given rate and length with girths of at least six for any sub-matrix configuration or rearrangement. The code size is also easily varied by increasing or decreasing sub-matrix size. Codes obtained using a sequential search criteria show poor performance at low girths (6 and 8) while random searches result in good performing codes. \nQuasi-cyclic codes could be implemented in a variety of decoder architectures. One of the many options is the choice of processing nodes interconnect. We show how quasi-cyclic codes processing could be scheduled through a multistage network. Although these net-works have more delay than other modes of communication, they offer more flexibility at a reasonable cost. Banyan and Benes networks are suggested as the most suitable networks. \nDecoding delay is also one of several issues considered in decoder design and implementation. In this thesis, we overlap check and variable node computations to reduce decoding time. Three techniques are discussed, two of which are introduced in this thesis. The techniques are code matrix permutation, matrix space restriction and sub-matrix row-column scheduling. Matrix permutation rearranges the parity-check matrix such that rows and columns that do not have connections in common are separated. This techniques can be applied to any matrix. Its effectiveness largely depends on the structure of the code. We show that its success also depends on the size of row and column weights. Matrix space restriction is another technique that can be applied to any code and has fixed reduction in time or amount of overlap. Its success depends on the amount of restriction and may be traded with performance loss. The third technique already suggested in literature relies on the internal cyclic structure of sub-matrices to achieve overlapping. The technique is limited to LDPC code matrices in which the number of sub-matrices is equal to row and column weights. We show that it can be applied to other codes with a lager number of sub-matrices than code weights. However, in this case maximum overlap is not guaranteed. We calculate the lower bound on the amount of overlapping. Overlapping could be applied to any sub-matrix configuration of quasi-cyclic codes by arbitrarily choosing \nthe starting rows for processing. Overlapping decoding time depends on inter-iteration waiting times. We show that there are upper bounds on waiting times which depend on the code weights. Waiting times could be further reduced by restricting shifts in identity sub-matrices or using smaller sub-matrices. This overlapping technique can reduce the decoding time by up to 50% compared to conventional message and computation scheduling. \nTechniques of matrix permutation and space restriction results in decoder architectures that are flexible in LDPC code design in terms of code weights and size. This is due to the fact that with these techniques, rows and columns are processed in sequential order to achieve overlapping. However, in the existing technique, all sub-matrices have to be processed in parallel to achieve overlapping. Parallel processing of all code sub-matrices requires the architecture to have the number of processing units at least equal to the number sub-matrices. Processing units and memory space should therefore be distributed among the sub-matrices according to the sub-matrices arrangement. This leads to high complexity or inflexibility in the decoder architecture. We propose a simple, programmable and high throughput decoder architecture based on matrix permutation and space restriction techniques.
This paper,based on algebra and graph,proposes a method for constructing structured low-density parity-check(LDPC) codes.In this method,the authors design a connected graph with three kinds of special path to ensure that the Tanner graph of the parity check matrix mapped from the connected graph is without short cycles.The construction method results in two classes of(3,k)-regular quasi-cyclic LDPC codes with girth 8 and 12 respectively.Furthermore,by extending this construction method,two classes of LDPC codes with column weight 2,whose girths are respectively 16 and 24,can be obtained.The simulation studies show that these codes can achieve better performance than randomly constructed regular LDPC codes over AWGN channels with iterative decoding.At the BER of 10-5,the new proposed(3,6)-regular(4356,2205) QC-LDPC code performs 1.48dB from the Shannon limit.Moreover,it outperforms the random regular LDPC code of comparable parameters by 0.1dB.For the new proposed structured LDPC codes with column weight 2,they can achieve about 2dB coding gains with respect to the random regular LDPC codes with similar block lengths and code rates.
There is an important breakthrough in the field of forward error correction techniques, low-density parity-check (LDPC) codes. These codes have potential to approach the Shannon limit with reliable performance on a given channel, known as the channel capacity. Recently, researchers pay much more attention towards LDPC codes because its performance is better than Turbo codes. However, the LDPC code is the best when it is an irregular code and uses with a very large block-length. Although, the short block-length LDPC codes perform not so well, they are easy to implement in various practical applications. Therefore, there is still a demand of new development on the encoding side of LDPC codes for various ranges of code rate and code length so as to capable of using in many applications.This thesis proposes the development of quasi-cyclic (QC) LDPC codes for column weight 3. In the first part of this thesis, we propose a new construction algorithm of QC-LDPC codes for medium to large block-length by combining QC-LDPC codes of small block-length as their component codes, via Chinese remainder theorem (CRT). Such component codes were constructed by permuting each column block sequentially to attain the desire local girth. After combining all component codes to generate an expanded parity-check matrix, the resulting girth is greater than or at least equal to the maximum girth of the component codes. Simulation results show that our proposed construction method of the parity-check matrix significantly outperforms the other well-known existing methods in terms of low error-floor, simple structure, high performance, and can reduce encoding complexity.In addition, this thesis also proposes two new construction methods for QC-LDPC codes, namely a base matrix method and a subtraction based method. A base matrix based method is a simple, less computational complexity method for constructing the exponent matrix (3, K) of girth 8, 10 and 12 of QC-LDPC codes. Another method is a subtraction method, which has a similar exponent matrix as a base matrix method and has a girth at least 8. Results indicate that the LDPC codes constructed from these two methods have flexibility for arbitrary block-column length K and have a similar BER performance if compared to existing methods.
Short or moderate-length non-binary low-density parity-check (NB-LDPC) codes have the potential applications in future low latency and high-reliability communication thanks to the strong error correction capability and parallel decoding. Because of the existence of the error floor, the NB-LDPC codes usually cannot satisfy very low bit error rate (BER) requirements. In this paper, a low-complexity method is proposed for optimizing the minimum distance of the NB-LDPC code in a progressive chord edge growth manner. Specifically, each chord edge connecting two non-adjacent vertices is added to the Hamiltonian cycle one-by-one. For each newly added chord edge, the configuration of non-zero entries corresponding to the chord edge is determined according to the so-called full rank condition (FRC) of all cycles that are related to the chord edge in the obtained subgraph. With minor modifications to the designed method, it can be used to construct the NB-LDPC codes with an efficient encoding structure. The analysis results show that the method for designing NB-LDPC codes while using progressive chord edge growth has lower complexity than traditional methods. The simulation results show that the proposed method can effectively improve the performance of the NB-LDPC code in the high signal-to-noise ratio (SNR) region. While using the proposed scheme, an NB-LDPC code with a quite low BER can be constructed with extremely low complexity.