Abstract Distributed quantum computing leverages multiple quantum devices collectively to perform computations exceeding each device's capabilities. A currently studied technique to enable this distributed approach is wire cutting, which decomposes a quantum circuit into smaller subcircuits by cutting connecting wires. These subcircuits can be executed on distributed devices, and their results are then classically combined to reconstruct the original computation's result. However, wire cutting requires additional circuit executions to preserve result accuracy, with their number growing exponentially with each cut. Thus, minimizing this sampling overhead is crucial for reducing execution time. Employing shared non‐maximally entangled (NME) states between distributed devices reduces this overhead for single wire cuts, approaching ideal teleportation with maximally entangled states. Extending this approach to jointly cutting multiple wires using NME states remained unexplored. This study addresses this gap by investigating the use of NME states for joint wire cuts, aiming to reduce the sampling overhead further. The three main contributions include (i) determining the minimal sampling overhead for this scenario, (ii) analyzing the overhead when using composite NME states constructed from smaller NME states, and (iii) introducing a wire cutting technique that achieves the optimal sampling overhead with pure NME states, advancing toward wire cutting with arbitrary NME states.
Quantum information processing is expressed using quantum bits (qubits) and quantum gates which are arranged in terms of quantum circuits. Here, each qubit is associated with a quantum circuit wire which is used to conduct the desired operations. Most of the existing quantum circuits allocate a single quantum circuit wire for each qubit and hence introduce significant overhead. In fact, qubits are usually not needed during the entire computation, only between their initialization and measurement. Before and after that, corresponding wires may be used by other qubits. In this work, we propose a solution which exploits this fact in order to optimize the design of quantum circuits with respect to the required wires. To this end, we introduce a representation of the lifetimes of all qubits which is used to analyze the respective need for wires. Based on this analysis, a method is proposed which ``recycles'' the available wires and, as a result, reduces the size of the resulting circuit. Numerical tests based on established reversible and fault-tolerant quantum circuits confirm that the proposed solution reduces the number of wires by more than 90% compared to unoptimized quantum circuits.
Trapped-ion Quantum Charge-Coupled Devices (QCCD) are a leading contender for quantum computing, but their scalability is constrained by control wiring and electronics. Wiring using Integrated Switching Electronics (WISE), a recently proposed QCCD architecture, reduces wiring through multiplexing and integrated switching hardware. However, this leaves an execution model with limited parallelism and limited flexibility in ion movement. Further, these devices need to be paired with a quantum error correction (QEC) code to enable fault-tolerant quantum computation (FTQC). Can WISE architectures efficiently support FTQC requirements? Which QEC choices, device and control parameters are practical?
We present WISER, a cross-layer design-space exploration framework for trapped-ion systems with multiplexed control. WISER combines a WISE-specific SAT-based compiler, a physics-informed noise model and logical-memory simulation to estimate logical error rates, logical clock speeds and control power across hardware parameters and QEC families. Its compiler reduces routing time by
2.6--
18.8× relative to a greedy WISE-compatible baseline.
Our analysis provides concrete design guidance. Two-ion traps with
16-way multiplexing,
8× lower than the original WISE proposal, give the fastest logical clock that meets our reliability and cold-stage power targets. With current hardware parameters, the distance-7 surface code is the only evaluated code to meet our early-FTQC screen, at
4.58Hz and
2.04W of DAC power per logical qubit. At this operating point, ion transport and recooling take
94--
96% of the WISE cycle, and even without them sample-and-hold electrode charging leaves millisecond-scale syndrome-extraction rounds.