Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Radiotaajuuksinen kvanttipiirijäähdytin

Arto Viitanen

Published Jan 29, 2019• 0 citations
OpenAlex

Abstract

A quantum-circuit refrigerator draws energy from the quantum electric degrees of freedom of a coupled circuit, thus decreasing the entropy of the circuit. This allows rapid and on-demand initialization of the circuit, such as a qubit, imperative for quantum computing. The initialization efficiency of the refrigerator depends on the detailed properties of the coupled device and on the coupling scheme. In this thesis, we study the efficiency and controllability of initializing a resonator supported by an additional resonator coupled to the refrigerator. The role of the supporting resonator is to provide additional paths for the lower-frequency primary resonator to relax, enhancing the operation of the quantum-circuit refrigerator. This elementary system provides information also for the initialization of other components, such as qubits. The refrigeration is studied by deriving the dynamics of the device from the first-principles, yielding transition rates between different resonator states from which the resonator quality factor and the effective temperature are derived. The validity of the formulated model is verified by experimentally measuring the quality factor of a superconducting resonator, which is found to be tunable over three orders of magnitude. Furthermore, instead of applying dc bias, the refrigeration effect can be achieved by driving the supporting resonator. Although the goal of this thesis is to study the quality factor, we also observe an oscillatory Lamb shift at high drive powers on the supporting mode.

Related papers

Quantum-circuit refrigerator

Quantum technology promises revolutionizing applications in information processing, communications, sensing and modelling.However, efficient on-demand cooling of the functional quantum degrees of freedom remains challenging in many solid-state implementations, such as superconducting circuits.Here we demonstrate direct cooling of a superconducting resonator mode using voltage-controllable electron tunnelling in a nanoscale refrigerator.This result is revealed by a decreased electron temperature at a resonator-coupled probe resistor, even for an elevated electron temperature at the refrigerator.Our conclusions are verified by control experiments and by a good quantitative agreement between theory and experimental observations at various operation voltages and bath temperatures.In the future, we aim to remove spurious dissipation introduced by our refrigerator and to decrease the operational temperature.Such an ideal quantum-circuit refrigerator has potential applications in the initialization of quantum electric devices.In the superconducting quantum computer, for example, fast and accurate reset of the quantum memory is needed.

Physics Today•Jun 1, 2017•2 citations

Quantum-circuit refrigerator

Kuan Yen Tan, Matti Partanen, Russell E. Lake +3 more

Quantum technology promises revolutionizing applications in information processing, communications, sensing and modelling. However, efficient on-demand cooling of the functional quantum degrees of freedom remains challenging in many solid-state implementations, such as superconducting circuits. Here we demonstrate direct cooling of a superconducting resonator mode using voltage-controllable electron tunnelling in a nanoscale refrigerator. This result is revealed by a decreased electron temperature at a resonator-coupled probe resistor, even for an elevated electron temperature at the refrigerator. Our conclusions are verified by control experiments and by a good quantitative agreement between theory and experimental observations at various operation voltages and bath temperatures. In the future, we aim to remove spurious dissipation introduced by our refrigerator and to decrease the operational temperature. Such an ideal quantum-circuit refrigerator has potential applications in the initialization of quantum electric devices. In the superconducting quantum computer, for example, fast and accurate reset of the quantum memory is needed.

arXiv:1606.04728•Nature Communications•May 8, 2017•124 citations

Quantum-circuit refrigeration of a superconducting microwave resonator well below a single quantum

Arto Viitanen, Timm Mörstedt, Wallace S. Teixeira +4 more

We experimentally demonstrate a recently proposed single-junction quantum-circuit refrigerator (QCR) as an tunable low-temperature environment for a superconducting 4.7 GHz resonator. With the help of a transmon qubit, we measure the populations of the different resonator Fock states, thus providing reliable access to the temperature of the engineered electromagnetic environment and its effect on the resonator. We demonstrate coherent and thermal resonator states and that the on-demand dissipation provided by the QCR can drive these to a small fraction of a photon on average, even if starting above 1 K. We observe that the QCR can be operated either with a dc bias voltage or a gigahertz rf drive, or a combination of these. The bandwidth of the rf drive is not limited by the circuit itself and consequently, we show that 2.9 GHz continuous and 10 ns pulsed drives lead to identical desired refrigeration of the resonator. These observations answer to the shortcomings of previous works where the Fock states were not resolvable and the QCR exhibited slow charging dynamics. Thus, this work introduces a versatile tool to study open quantum systems, quantum thermodynamics, and to quickly reset superconducting qubits. Published by the American Physical Society 2024

arXiv:2308.00397•Physical Review Research•Jun 10, 2024•9 citations

Charge dynamics in quantum-circuit refrigeration: Thermalization and microwave gain

Hao Hsu, Matti Silveri, Vasilii Sevriuk +2 more

Previous studies of photon-assisted tunneling through normal-metal–insulator–superconductor junctions have exhibited potential for providing a convenient tool to control the dissipation of quantum-electric circuits in situ. However, the current literature on such a quantum-circuit refrigerator (QCR) does not present a detailed description for the charge dynamics of the tunneling processes or the phase coherence of the open quantum system. Here, we derive a master equation describing both quantum-electric and charge degrees of freedom, and discover that typical experimental parameters of low temperature and yet lower charging energy yield a separation of time scales for the charge and quantum dynamics. Consequently, the minor effect of the different charge states can be taken into account by averaging over the charge distribution. We also consider applying an ac voltage to the tunnel junction, which enables control of the decay rate of a superconducting qubit over four orders of magnitude by changing the drive amplitude; we find an order-of-magnitude drop in the qubit excitation in 40 ns and a residual reset infidelity below 10−4. Furthermore, for the normal island, we consider the case of charging energy and single-particle level spacing large compared to the superconducting gap, i.e., a quantum dot. Although the decay rates arising from such a dot QCR appear low for use in qubit reset, the device can provide effective negative damping (gain) to the coupled microwave resonator. The Fano factor of such a millikelvin microwave source may be smaller than unity, with the latter value being reached close to the maximum attainable power.

arXiv:2107.04278•AVS Quantum Science•Oct 8, 2021•9 citations

Fast unconditional initialization for superconducting qubit and resonator using quantum-circuit refrigerator

T. Yoshioka, J. S. Tsai

In a quantum computation scheme, such as recycling a qubit, the initialization of the qubit is always required. At present, the initialization of the qubit is one of the bottlenecks in such computation, and high fidelity and fast initialization still remain important research subjects. In this study, by coupling a SINIS (superconductor–insulator–normal metal–insulator–superconductor) junction to a coupled system consisting of a qubit and a resonator, a photon is removed from the resonator by single-photon-assisted tunneling, and the effective relaxation rate of the resonator is increased. In addition, by applying an |e,0⟩−|f,0⟩ drive pulse and an |f,0⟩−|g,1⟩ drive pulse to the qubit, the energy of the qubit is rapidly transferred to the resonator to realize high-speed initialization. The present simulation shows that the qubit can be initialized with 99% fidelity in 80 ns and 99.9% in 137 ns when the electron temperature of the normal metal of the SINIS junction is 10 mK. The simulation also shows that the relaxation time of the qubit is about 13% longer when the resonator is interposed between the SINIS junction and the qubit than when the SINIS junction is directly coupled to the qubit.

Applied Physics Letters•Sep 20, 2021•14 citations

Tunable refrigerator for nonlinear quantum electric circuits

Hao Hsu, Matti Silveri, András Gunyhó +3 more

The emerging quantum technological applications call for fast and accurate initialization of the corresponding devices to low-entropy quantum states. To this end, we theoretically study a recently demonstrated quantum-circuit refrigerator in the case of nonlinear quantum electric circuits such as superconducting qubits. The maximum refrigeration rate of transmon and flux qubits is observed to be roughly an order of magnitude higher than that of usual linear resonators, increasing flexibility in the design. We find that for typical experimental parameters, the refrigerator is suitable for resetting different qubit types to fidelities above 99.99% in a few or a few tens of nanoseconds depending on the scenario. Thus the refrigerator appears to be a promising tool for quantum technology and for detailed studies of open quantum systems.

arXiv:2002.06867•Physical review. B./Physical review. B•Jun 11, 2020•21 citations
A quantum-circuit refrigerator draws energy from the quantum electric degrees of freedom of a coupled circuit, thus decreasing the entropy of the circuit. This allows rapid and on-demand initialization of the circuit, such as a qubit, imperative for quantum computing. The initialization efficiency of the refrigerator depends on the detailed properties of the coupled device and on the coupling scheme. In this thesis, we study the efficiency and controllability of initializing a resonator supported by an additional resonator coupled to the refrigerator. The role of the supporting resonator is to provide additional paths for the lower-frequency primary resonator to relax, enhancing the operation of the quantum-circuit refrigerator. This elementary system provides information also for the initialization of other components, such as qubits. The refrigeration is studied by deriving the dynamics of the device from the first-principles, yielding transition rates between different resonator states from which the resonator quality factor and the effective temperature are derived. The validity of the formulated model is verified by experimentally measuring the quality factor of a superconducting resonator, which is found to be tunable over three orders of magnitude. Furthermore, instead of applying dc bias, the refrigeration effect can be achieved by driving the supporting resonator. Although the goal of this thesis is to study the quality factor, we also observe an oscillatory Lamb shift at high drive powers on the supporting mode.
Quantum technology promises revolutionizing applications in information processing, communications, sensing and modelling.However, efficient on-demand cooling of the functional quantum degrees of freedom remains challenging in many solid-state implementations, such as superconducting circuits.Here we demonstrate direct cooling of a superconducting resonator mode using voltage-controllable electron tunnelling in a nanoscale refrigerator.This result is revealed by a decreased electron temperature at a resonator-coupled probe resistor, even for an elevated electron temperature at the refrigerator.Our conclusions are verified by control experiments and by a good quantitative agreement between theory and experimental observations at various operation voltages and bath temperatures.In the future, we aim to remove spurious dissipation introduced by our refrigerator and to decrease the operational temperature.Such an ideal quantum-circuit refrigerator has potential applications in the initialization of quantum electric devices.In the superconducting quantum computer, for example, fast and accurate reset of the quantum memory is needed.
Quantum technology promises revolutionizing applications in information processing, communications, sensing and modelling. However, efficient on-demand cooling of the functional quantum degrees of freedom remains challenging in many solid-state implementations, such as superconducting circuits. Here we demonstrate direct cooling of a superconducting resonator mode using voltage-controllable electron tunnelling in a nanoscale refrigerator. This result is revealed by a decreased electron temperature at a resonator-coupled probe resistor, even for an elevated electron temperature at the refrigerator. Our conclusions are verified by control experiments and by a good quantitative agreement between theory and experimental observations at various operation voltages and bath temperatures. In the future, we aim to remove spurious dissipation introduced by our refrigerator and to decrease the operational temperature. Such an ideal quantum-circuit refrigerator has potential applications in the initialization of quantum electric devices. In the superconducting quantum computer, for example, fast and accurate reset of the quantum memory is needed.
We experimentally demonstrate a recently proposed single-junction quantum-circuit refrigerator (QCR) as an tunable low-temperature environment for a superconducting 4.7 GHz resonator. With the help of a transmon qubit, we measure the populations of the different resonator Fock states, thus providing reliable access to the temperature of the engineered electromagnetic environment and its effect on the resonator. We demonstrate coherent and thermal resonator states and that the on-demand dissipation provided by the QCR can drive these to a small fraction of a photon on average, even if starting above 1 K. We observe that the QCR can be operated either with a dc bias voltage or a gigahertz rf drive, or a combination of these. The bandwidth of the rf drive is not limited by the circuit itself and consequently, we show that 2.9 GHz continuous and 10 ns pulsed drives lead to identical desired refrigeration of the resonator. These observations answer to the shortcomings of previous works where the Fock states were not resolvable and the QCR exhibited slow charging dynamics. Thus, this work introduces a versatile tool to study open quantum systems, quantum thermodynamics, and to quickly reset superconducting qubits. Published by the American Physical Society 2024
Previous studies of photon-assisted tunneling through normal-metal–insulator–superconductor junctions have exhibited potential for providing a convenient tool to control the dissipation of quantum-electric circuits in situ. However, the current literature on such a quantum-circuit refrigerator (QCR) does not present a detailed description for the charge dynamics of the tunneling processes or the phase coherence of the open quantum system. Here, we derive a master equation describing both quantum-electric and charge degrees of freedom, and discover that typical experimental parameters of low temperature and yet lower charging energy yield a separation of time scales for the charge and quantum dynamics. Consequently, the minor effect of the different charge states can be taken into account by averaging over the charge distribution. We also consider applying an ac voltage to the tunnel junction, which enables control of the decay rate of a superconducting qubit over four orders of magnitude by changing the drive amplitude; we find an order-of-magnitude drop in the qubit excitation in 40 ns and a residual reset infidelity below 10−4. Furthermore, for the normal island, we consider the case of charging energy and single-particle level spacing large compared to the superconducting gap, i.e., a quantum dot. Although the decay rates arising from such a dot QCR appear low for use in qubit reset, the device can provide effective negative damping (gain) to the coupled microwave resonator. The Fano factor of such a millikelvin microwave source may be smaller than unity, with the latter value being reached close to the maximum attainable power.
In a quantum computation scheme, such as recycling a qubit, the initialization of the qubit is always required. At present, the initialization of the qubit is one of the bottlenecks in such computation, and high fidelity and fast initialization still remain important research subjects. In this study, by coupling a SINIS (superconductor–insulator–normal metal–insulator–superconductor) junction to a coupled system consisting of a qubit and a resonator, a photon is removed from the resonator by single-photon-assisted tunneling, and the effective relaxation rate of the resonator is increased. In addition, by applying an |e,0⟩−|f,0⟩ drive pulse and an |f,0⟩−|g,1⟩ drive pulse to the qubit, the energy of the qubit is rapidly transferred to the resonator to realize high-speed initialization. The present simulation shows that the qubit can be initialized with 99% fidelity in 80 ns and 99.9% in 137 ns when the electron temperature of the normal metal of the SINIS junction is 10 mK. The simulation also shows that the relaxation time of the qubit is about 13% longer when the resonator is interposed between the SINIS junction and the qubit than when the SINIS junction is directly coupled to the qubit.
The emerging quantum technological applications call for fast and accurate initialization of the corresponding devices to low-entropy quantum states. To this end, we theoretically study a recently demonstrated quantum-circuit refrigerator in the case of nonlinear quantum electric circuits such as superconducting qubits. The maximum refrigeration rate of transmon and flux qubits is observed to be roughly an order of magnitude higher than that of usual linear resonators, increasing flexibility in the design. We find that for typical experimental parameters, the refrigerator is suitable for resetting different qubit types to fidelities above 99.99% in a few or a few tens of nanoseconds depending on the scenario. Thus the refrigerator appears to be a promising tool for quantum technology and for detailed studies of open quantum systems.