In this thesis, I present the work I did in my PhD in the field of quantum thermodynamics. The aim of this work is to explore quantum engines that can exploit the great tunability of cold atomic systems as the working medium. The thesis is divided into two parts. In the first part, I study the thermodynamics of one-dimensional interacting systems to use them for designing quantum engines. It consists of two research projects. In the first project, I explore anomalous heat flows between two strongly correlated particles and discuss the perspective of using it to realize a quantum fridge. In the second project, I study a quantum heat engine where the work extraction is assisted by changing the interaction within the working medium. In the second part of my thesis, I focus on controlling open quantum systems for optimizing the performance of quantum engines. The quantum Brownian motion has been used to test the different methods. This part consists of two projects, where in the first one, I realize a shortcut to equilibration protocol in a driven open quantum system. For that I propose two different methods. The first one consists of mapping the dynamics of the quantum Brownian motion to an effective stochastic dynamics of an isolated particle. The second methods consists of doing the shortcut protocol by reverse engineering a time-dependent master equation, which was derived by using the Lewis-Riesenfeld invariant. Finally in the second project, I use optimal control methods to speed up the thermalization in isochoric strokes. I also derive a speed limit that predicts the timescale at which the optimal control fails. All projects significantly contribute to the understanding and control of quantum engines.
In this thesis, I present the work I did in my PhD in the field of quantum thermodynamics. The aim of this work is to explore quantum engines that can exploit the great tunability of cold atomic systems as the working medium. The thesis is divided into two parts. In the first part, I study the thermodynamics of one-dimensional interacting systems to use them for designing quantum engines. It consists of two research projects. In the first project, I explore anomalous heat flows between two strongly correlated particles and discuss the perspective of using it to realize a quantum fridge. In the second project, I study a quantum heat engine where the work extraction is assisted by changing the interaction within the working medium. In the second part of my thesis, I focus on controlling open quantum systems for optimizing the performance of quantum engines. The quantum Brownian motion has been used to test the different methods. This part consists of two projects, where in the first one, I realize a shortcut to equilibration protocol in a driven open quantum system. For that I propose two different methods. The first one consists of mapping the dynamics of the quantum Brownian motion to an effective stochastic dynamics of an isolated particle. The second methods consists of doing the shortcut protocol by reverse engineering a time-dependent master equation, which was derived by using the Lewis-Riesenfeld invariant. Finally in the second project, I use optimal control methods to speed up the thermalization in isochoric strokes. I also derive a speed limit that predicts the timescale at which the optimal control fails. All projects significantly contribute to the understanding and control of quantum engines.
In this thesis, in order to study the properties of non-Markovian dynamics, we work on a non-Markovian heat engine and the time evolution of non-Markovian dynamics.In Part 1, we investigate the non-Markovian quantum heat engine.Quantum thermodynamics explores the thermodynamic phenomena that emerge when interactions between macroscopic systems and microscopic quantum ones go into action.Among various issues, quantum heat engines, in particular, have attracted much attention as a critical step in theoretical formulation of quantum thermodynamics and investigation of efficient use of heat by means of quantum resources.In the present thesis, we focus on heat absorption and emission processes as well as work extraction processes of a quantum Otto cycle.We describe the former as non-Markovian dynamics, and thereby find that the interaction energy between a macroscopic heat bath and a microscopic qubit is not negligible.Specifically, we reveal that the interaction energy is divided into the system and the bath in a region of the short interaction time and remains negative in the region of the long interaction time.In addition, a counterintuitive energy flow from the system and the interaction energy to the hot bath occurs in another region of the short interaction time.We quantify these effects by defining an index of non-Markovianity in terms of the interaction energy.With this behavior of the interaction energy, we show that a non-Markovian quantum Otto cycle can switch functions such as an engine as well as a heater or a heat pump by controlling the interaction time with the heat bath.In particular, the qubit itself loses its energy if we shorten the interaction time, and in this sense, the qubit is cooled through the cycle.This property has a possibility of being utilized for cooling the qubits in quantum computers.We also describe the work extraction from the microscopic system to a macroscopic system like us humans as an indirect measurement process by introducing a work storage as a new reservoir.In Part 2, we discuss the non-Markovian dynamics in terms of the intersection of paths.Several indicators have been proposed to express reversibility and irreversibility in open quantum systems, but research is still in progress regarding their correspondence with the non-Markovianity.We study a method that focuses on the intersection of paths of the dynamics of the system as a new indicator of reversibility and irreversibility.We show that the intersection of paths corresponds to the linear independence of the eigenstates of the eigenequation of the master equation.It is expected that the dynamics can be classified in terms of which pair of the eigenstates is used to expand the initial state.We also discuss the reversibility and the irreversibility comprehensively in a way that includes the map and the initial state rather than the map only.We reveal that the differnce of the Markovian master equation and the non-Markovian one is the nonlinear eigenvalue dependence of the eigenequation.We demonstrate for the two-qubit model that the quantum master equation can be converted into a linear eigenvalue problem.
Quantum mechanics has given us a new playground in which to experiment that boasts several unique features. In this thesis, we explore it in the context of thermodynamics: looking at what kind of thermal devices can be constructed and how quantum behaviour affects them. We consider three research strands. In the first part we formulate a selection of heat engines with two-qubit systems, utilising environments that induce quantum correlations into the system. We see that these correlations can have some effects on the work of the engine, but this effect is system dependent. Describing the dynamics of a quantum system in contact with an external environment is often achieved with a master equation. When considering systems comprised of multiple subsystems, the description becomes more complicated and some of the master equations that have been used previously produce unphysical results. In the second part of this thesis we show that if one does the proper analysis of the microscopic derivation of these master equations, then no thermodynamical inconsistencies occur. When one considers a system connected to three or more environments, a whole new set of possible thermodynamical machines becomes available. One notable case of these is the absorption refrigerator, which performs refrigeration without the need for an external work source. For the third part, we show how one can construct an absorption refrigerator using a three-qubit system with two-body interactions and describe its operation. We also show some thermal control properties of the three-qubit system.
The study of nanoscopic thermal devices attracts an increasing attention, not only because of their key role in understanding the emergence of thermodynamics from quantum theory, but also for the potential use of quantum-mechanical thermal cycles, especially refrigerators, in quantum technologies. This thesis, is devoted to the performance optimization of autonomous (heat-driven) refrigerators. For a quantum refrigerator, one has a full microscopic description of the simple system serving as a working medium, and of its interaction with the external heat baths. This enables a consistent `finite-time? thermodynamic analysis, not relying on any phenomenological assumptions about the leading sources of irreversibility, and allows to establish arguably general performance bounds, essential to benchmark the operation of realistic devices. In particular, tight and model-independent upper bounds for the coefficient of performance at maximum power, are derived here for a class of strongly coupled refrigerators, and seen to hold more generally for other types of heat and power-driven cycles. Remarkably, these ultimate limitations only depend on the particulars of the system-baths interaction at the interface with the object to be cooled. Strategies might be then defined so as to saturate those limits: It is shown how the working medium of the refrigerator may be, for instance, scaled up into a parallel multi-stage configuration, resembling that of macroscopic multi-effect absorption chillers, as a means to increase its cooling power. Similarly, by applying reservoir engineering techniques on selected transitions between the energy states of the working medium, one can mimic exploitable non-equilibrium fluctuations in the baths, capable of boosting the overall power and COP beyond what would be otherwise allowed by the second law of thermodynamics. In this way, heat-driven chillers could be set to compete on a equal footing with the best power-driven refrigerators.
Quantum metrology and quantum thermodynamics are two relatively young fields that, in the spirit of the second quantum revolution, apply quantum theory to address fundamental questions and to develop technological applications. While the research in these fields is predominantly conducted with discrete, finite-dimensional quantum systems in mind, this thesis makes the case for continuous variable mechanical degrees of freedom. In the first of three projects, we present two realizations of the Otto cycle with a planar rotor as the working medium. As a mechanical system, the planar rotor has a well-defined classical analogue that allows the identification of genuine quantum effects by comparing classical and quantum machine. Here, we mainly focus on the parameter regimes, where the machine admits a certain operation mode, i.e. an engine, a refrigerator, or a heater. In the first realization, we find a systematic disadvantage of the quantum machine. The opposite is true for the second realization: It can be shown that the classical machine can, in general, not be run in a useful operation mode. The quantum machine, on the other hand, admits an engine operation mode for sufficiently cold temperatures of the cold bath. The second project is devoted to the dynamics of a quantum system subjected to a thermal gas. In contrast to repeated interaction models, we consider any gas particle as a motional degree of freedom. We Employ quantum mechanical scattering theory to derive a low-density limit master equation, including gases with internal structure. Then, the thermodynamic consistency of the master equation is shown. A comparison with repeated interaction models makes evident that the inclusion of motional degrees of freedom of the gas plays a curial role for the consistency. Finally, we consider a nonequilibrium scenario, where the internal and motional degrees of freedom of the gas are thermal with respect to different temperatures. We show that, under the influence of this gas, the ergotropy of the system can increase. In the last project, we apply quantum metrology on the measurement of magnetic moments in an electron microscope. We consider two types of sample, one that is static and does not change under the influence of the electron and another one that is described by a quantum system and experiences quantum backaction. For both samples, we derive the scattering operator from first principles. Then, two metrological tasks are considered: First, the sensing of the strength of the magnetic moment. We derive the Fisher information in several bases and find that momentum measurements are already optimal in the case without backaction. With backaction included, a measurement of angular momentum is optimal. The second task, we consider, is the optimal discrimination of the scattered and unscattered motional electron state. We derive the trace distance and find the experimentally achievable basis with the highest classical trace distance, which is still significantly worse than the theoretical optimum.
I present the work done during my PhD in the field of quantum gases, metrology, and thermodynamics, which aims at revealing and controlling non-classical correlations and features in various systems. First, I have studied two strongly interacting bosons with synthetic spin-orbit coupling. In this work, I have described the ground state beyond the mean-field regime and explored the existence of non-classical correlations. In a second project, I have investigated the dynamical phase transition in a system of cold atoms trapped in one-dimensional optical lattices. This is the first work to study the dynamical phase transition in a continuous model, and I have revealed the relation between the dynamical phase transition and temporal orthogonality. Third, I consider an impurity coupled to a gas in a two-dimensional lattice. This work has explored the dynamics of the impurity and proposed an approach to probe the local excitation spectrum of the gas at the site coupled to the impurity. Next, I present my contribution to a project on Bayesian estimation with continuous-variable systems. I have examined what is the best probe state for heterodyne or homodyne detection to estimate a single parameter. In the last project, I have explored steady states in quantum thermal machines. As dealing with multi-level and larger numbers of systems quickly becomes intractable, I have mapped them to lower-dimensional systems by utilising the idea of virtual qubits so that one can design autonomous quantum machines beyond a few qubits.
The development of the theory of thermodynamics dates back nearly two centuries, to when the need arose to comprehend and enhance the performance of a novel technology of that era, the heat engine. Extending the classical concepts related to the properties of heat and work into the quantum realm forms the foundation of an emerging field of research known as quantum thermodynamics. To unify the disparate theories of classical thermodynamics and quantum mechanics, a thoroughly developed theoretical framework is necessary. Quantum heat engines provide a fundamental platform for this purpose. Many-body quantum heat engines, in particular, can provide important insights into the potential utilisation of exotic quantum phenomena, such as entanglement and quantum coherence, for building quantum devices that can surpass their classical counterparts in performance. One-dimensional (1D) Bose gases are a paradigmatic example of an interacting quantum many-body system that can be used as a versatile platform for building heat engines to test the thermodynamic theories in the quantum regime. The versatility of this platform comes through the routine experimental realisability of 1D Bose gases, with precise control of their internal and external properties, such as the strength of inter-atomic interactions and external confinement, and the presence of quantum many-body effects. In recent years, there has been an increased focus on exploiting the unique properties of ultracold atomic gases to realize many-body quantum heat engines. Despite this heightened attention and the resulting significant advances at the level of theoretical proposals, experimental feasibility and practical utilization of such engines remains at its infancy. Achieving significant advances at the experimental level requires a deeper understanding of the fundamental components of quantum-gas heat engines. Motivated by this goal, in this thesis we propose a novel and experimentally realistic quantum many-body heat engine that operates in an Otto cycle and uses a weakly interacting harmonically trapped 1D Bose gas as a working fluid. To execute work during the work strokes, we use a quench of the strength of interparticle interactions; when the quench is sudden with respect to the longitudinal dynamics, it maximises the power output. The interaction-induced work strokes are implemented by treating the working fluid as an isolated quantum many-body system undergoing a dynamical evolution starting from a finite temperature thermal equilibrium state. Furthermore, to optimize the performance of this interaction-driven quantum Otto cycle in an experimental scenario, we undertake a comprehensive numerical investigation of the dynamics of the system-reservoir coupling during the heat transfer strokes. We model the heat transfer strokes by treating the working substance as an open quantum many-body system that is coupled to a reservoir.After providing an overview of recent advances in the field of quantum thermodynamics and the background theory of 1D Bose gases in Chapters 1 and 2 we present the main results of this thesis in Chapters 3, 4 and 5. In Chapter 3, we study the individual interaction-induced work strokes of the Otto cycle with a weakly interacting 1D Bose gas as the working fluid. We evaluate the instantaneity of the sudden quench, specifically, identifying the minimum timescales required to perform the sudden quench of the interaction strength without invoking the transverse dynamics. Knowledge of these timescales enables us to perform the sudden quench in an experimental setting while ensuring that the system retains its 1D characteristics and the theory of 1D Bose gas is applicable. Additionally, we determine the time scales governing the opposite scenario of near-adiabatic quench which corresponds to minimum irreversible work in the engine cycle and hence maximum efficiency. This will help us benchmark the sudden quench engine's performance compared to a nearly ideal (near-adiabatic) scenario corresponding to maximum efficiency.Next, in Chapter 4, we analyze the heat transfer strokes of the Otto cycle, where the system is coupled to a reservoir. Using the c-field approach, we simulate the coupling dynamics of the system with both finite and infinite-size reservoirs. During the heat transfer stroke of the quantum Otto cycle, we treat the working fluid as an open quantum many-body system that is in thermal and diffusive contact with another quantum many-body system serving as the reservoir. In our real-time dynamical simulations of the engine strokes, we use a c-field approach based on the stochastic projected Gross-Pitaevskii equation. This approach enables us to treat both the working fluid and the hot and cold reservoirs as independent quantum many-body systems with chemical potential and temperature imbalances. To model the heat transfer strokes of such an engine with a finite-size reservoir, we use a tunnel-coupled model of two quasicondensates that treats both the system and the reservoir microscopically. Our analysis incorporates the impact of both finite-time operation and finite-size reservoirs in the engine cycle to gain a deeper understanding of the operational feasibility of such engines. Our results indicate that, in contrast to the common assumption of near-instantaneous heat transfer between the system and the reservoir, the thermalisation time of the system during these heat transfer strokes is non-negligible when compared to the duration of work strokes even in the near-adiabatic quench. This observation holds true even in the case of coupling the system with an infinite reservoir during the heat transfer strokes. Moreover, we demonstrate that for a finite-size reservoir, the initial dynamics (namely fast initial energy transfer) in the tunnel-coupled model of two quasicondensates can be leveraged to reduce the total driving time and hence increase the power output of the engine. Finally, in Chapter 5, we explore an alternate protocol that involves performing chemical work on the system during the heat transfer strokes to boost the efficiency and power output of the quantum Otto engines with a 1D Bose gas as a working fluid. We compare the performance of the sudden quench engine with an engine driven by a near-adiabatic and a finite-time quench of the interaction strength with respect to the longitudinal dynamics. We then conclude the thesis by summarising our main findings and presenting open questions for future work in the final chapter, Chapter 6.