Enhancing Error Correction through Concatenated Low-Density Parity-Check and Array Coding Schemes

Sofia Jensen, Ali Raza, Amirahmadi Kiani, Yara Hassan

Published Jun 24, 2020• 0 citations

Abstract

—Low-density parity-check (LDPC) codes have been shown to deliver capacity approaching performance; however, problematic graphical structures (e.g. trapping sets) in the Tanner graph of some LDPC codes can cause high error floors in bit-errorratio (BER) performance under conventional sum-product algorithm (SPA). This paper presents a serial concatenation scheme to avoid the trapping sets and to lower the error floors of LDPC code. The outer code in the proposed concatenation is the LDPC, and the inner code is a high rate array code. This approach applies an interactive hybrid process between the BCJR decoding for the array code and the SPA for the LDPC code together with bit-pinning and bit-flipping techniques. Margulis code of size (2640, 1320) has been used for the simulation and it has been shown that the proposed concatenation and decoding scheme can considerably improve the error floor performance with minimal rate loss

DOI: 10.5281/zenodo.19341854

Related papers

Enhancing Error Correction through Concatenated Low-Density Parity-Check and Array Coding Schemes

Sofia Jensen, Ali Raza, Amirahmadi Kiani +1 more

Oct 5, 20200 citations

Lowering Error Floors By Concatenation Of Low-Density Parity-Check And Array Code

Cinna Soltanpur, Mohammad Ghamari, Behzad Momahed Heravi +1 more

Low-density parity-check (LDPC) codes have been shown to deliver capacity approaching performance; however, problematic graphical structures (e.g. trapping sets) in the Tanner graph of some LDPC codes can cause high error floors in bit-error-ratio (BER) performance under conventional sum-product algorithm (SPA). This paper presents a serial concatenation scheme to avoid the trapping sets and to lower the error floors of LDPC code. The outer code in the proposed concatenation is the LDPC, and the inner code is a high rate array code. This approach applies an interactive hybrid process between the BCJR decoding for the array code and the SPA for the LDPC code together with bit-pinning and bit-flipping techniques. Margulis code of size (2640, 1320) has been used for the simulation and it has been shown that the proposed concatenation and decoding scheme can considerably improve the error floor performance with minimal rate loss.

World Academy of Science, Engineering and Technology, International Journal of Mathematical and Computational SciencesMar 4, 20171 citation

LDPC Decoding by Failed Check Nodes for Serial Concatenated Code

Seog Kun Yu, Eon Kyeong Joo

The use of serial concatenated codes is an effective technique for alleviating the error floor phenomenon of low-density parity-check (LDPC) codes. An enhanced sum–product algorithm (SPA) for LDPC codes, which is suitable for serial concatenated codes, is proposed in this paper. The proposed algorithm minimizes the number of errors by using the failed check nodes (FCNs) in LDPC decoding. Hence, the error-correcting capability of the serial concatenated code can be improved. The number of FCNs is simply obtained by the syndrome test, which is performed during the SPA. Hence, the decoding procedure of the proposed algorithm is similar to that of the conventional algorithm. The error performance of the proposed algorithm is analyzed and compared with that of the conventional algorithm. As a result, a gain of 1.4 dB can be obtained by the proposed algorithm at a bit error rate of 10−8. In addition, the error performance of the proposed algorithm with just 30 iterations is shown to be superior to that of the conventional algorithm with 100 iterations.

ETRI JournalNov 25, 20140 citations

LDPC decoder strategies for achieving low error floors

Yang Han, W.E. Ryan

One of the most significant impediments to the use of LDPC codes in many communication and storage systems is the error-rate floor phenomenon associated with their iterative decoders. The error floor has been attributed to certain subgraphs of an LDPC codepsilas Tanner graph induced by so-called trapping sets. We show in this paper that once we identify the trapping sets of an LDPC code of interest, a sum-product algorithm (SPA) decoder can be custom-designed to yield floors that are orders of magnitude lower than the conventional SPA decoder. We present three classes of such decoders: (1) a bi-mode decoder, (2) a bit-pinning decoder which utilizes one or more outer algebraic codes, and (3) three generalized-LDPC decoders. We demonstrate the effectiveness of these decoders for two codes, the rate-1/2 (2640,1320) Margulis code which is notorious for its floors and a rate-0.3 (640,192) quasi-cyclic code which has been devised for this study. Although the paper focuses on these two codes, the decoder design techniques presented are fully generalizable to any LDPC code.

Information Theory and Applications Workshop (ITA)Jan 1, 200837 citations

Low-floor decoders for LDPC codes

Yang Han, W.E. Ryan

One of the most significant impediments to the use of LDPC codes in many communication and storage systems is the error-rate floor phenomenon associated with their iterative decoders. The error floor has been attributed to certain subgraphs of an LDPC code's Tanner graph induced by so-called trapping sets. We show in this paper that once we identify the trapping sets of an LDPC code of interest, a sum-product algorithm (SPA) decoder can be custom-designed to yield floors that are orders of magnitude lower than floors of the the conventional SPA decoder. We present three classes of such decoders: (1) a bi-mode decoder, (2) a bit-pinning decoder which utilizes one or more outer algebraic codes, and (3) three generalized-LDPC decoders. We demonstrate the effectiveness of these decoders for two codes, the rate-1/2 (2640,1320) Margulis code which is notorious for its floors and a rate-0.3 (640,192) quasi-cyclic code which has been devised for this study. Although the paper focuses on these two codes, the decoder design techniques presented are fully generalizable to any LDPC code.

IEEE Transactions on CommunicationsJun 1, 2009123 citations

Techniques for the decoding of low density parity check codes: efficient simulation, algorithm improvement and implementation

Babak Daneshrad, Enver Çavuş

After the introduction of iterative coding, Low Density Parity Check (LDPC) codes have received a lot of attention due to their remarkable near Shannon-limit performance and practical decoder implementation. However, when employing an LDPC code for various applications, multiple issues do arise at the simulation, algorithm and implementation levels. The first issue is the performance evaluation of the iterative LDPC decoder in the very low Bit Error Rate (BER) regions. So far, no analytical tool has been developed to evaluate the performance of LDPC codes. Unfortunately standard Monte Carlo (MC) simulations cannot be used for performance estimation in these low BER regions due to prohibitive execution times. The second issue is the efficiency of the decoding algorithm. Due to the presence of short cycles in the bipartite graph, sum-product decoding algorithms lead to considerable performance loss for short block-length LDPC codes and produce error floors for longer codes. In addition, the iterative processing and estimation of soft probabilistic values with these algorithms result in very high computational complexity, which in turn impedes the adoption of LDPC codes for power constrained systems. Another prime objective is to design a high throughput decoder architecture which is capable of supporting multiple rates and variable code lengths within minimal area. This work aims to address and provide solutions to the above problems. As a solution to the performance estimation problem of LDPC codes, a highly efficient and novel fast BER simulation technique is developed. At the algorithm level, a performance improvement and error floor avoidance method is introduced, and a computationally efficient algorithm is developed for the sum-product decoding of LDPC codes. And finally, at the architecture level, a high throughput multi-rate variable code length implementation is presented which, when implemented, efficiently minimizes device resources while alleviating the routing complexity of the decoder.

Jan 1, 20072 citations