Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

EPJ Quantum Technology

Rydberg-atom electrical-field sensors – a case study of dual use of quantum sensors

Jürgen Altmann, Harald Kübler

Published Mar 18, 2026• 1 citation
Publisher

Abstract

Abstract Rydberg atoms in a room-temperature gas cell can be used for very sensitive detection of electrical fields in the megahertz to terahertz region. Sensors can be small, non-absorbing and are not destroyed by very strong fields with full-optical readout. Applications in communications, imaging and radar, and in metrology are foreseen. Military research is active, particularly in the USA, funding at first academic institutions, but increasingly development is contracted to commercial firms. There are similarities and differences between civilian and military applications, with interaction between both fields. Rydberg-atom electrical-field sensors are a general-purpose technology, and do not directly provide new offensive or threatening military options. No strong negative impacts on international security and peace are foreseen. Academic researchers have taken military funding readily.

DOI
10.1140/epjqt/s40507-026-00489-9

Related papers

Rydberg Atom Electric Field Sensors for Communications and Sensing

Charles Fancher, David R. Scherer, Marc C. St. John +1 more

Rydberg atom electric field sensors are projected to enable novel capabilities for resilient communications and sensing. This quantum sensor is small-size, highly sensitive, and broadly tunable, and it has the potential for performing precision vector electric field and angle-of-arrival measurements. While these atomic electric field sensors will not replace traditional receivers in commodity applications for RF signal reception, these sensors could be an enabling technology in niche application spaces. This review outlines the principles of operation of atomic electric field sensors and compares their performance capabilities to traditional RF receivers. It also highlights recent research and development efforts in atomic electric field sensing and identifies applications for which these sensors are projected to impact communications and remote sensing.

IEEE Transactions on Quantum Engineering•Jan 1, 2021•181 citations

Rydberg Atom-Based Sensors: Principles, Recent Advances, and Applications

Dinelka Somaweera, Amer Abdulghani, Ambali Alade Odebowale +7 more

Rydberg atoms are neutral atoms excited to high principal quantum number states, which endows them with exaggerated properties such as large electric dipole moments, long lifetimes, and extreme sensitivity to external electromagnetic fields. These characteristics form the foundation of Rydberg atom-based sensors, an emerging class of quantum devices capable of optically detecting electric fields across frequencies from DC to the terahertz regime. Rydberg-based electrometry operates through both Autler–Townes (AT) splitting of resonant Rydberg transitions and Stark-shift measurements for high-frequency or far-detuned fields, enabling broadband field sensing from DC to the THz regime. Using ladder-type electromagnetically induced transparency (EIT) and AT splitting, these sensors enable non-invasive, SI-traceable measurements of field amplitude, frequency, phase, and polarization. Recent developments have demonstrated broadband electric field probes, voltage calibration standards, and compact RF receivers based on thermal vapor cells and integrated photonic architectures. Furthermore, innovations in multi-photon EIT, superheterodyne readout, and multi wave mixing have expanded the dynamic range and bandwidth of Rydberg-based electrometry. Despite challenges related to environmental perturbations, linewidth broadening, and laser stabilization, ongoing advances in atomic control, hybrid photonic integration, and EIT-based readout promise scalable, chip-compatible sensors. This review summarizes the physical principles, experimental progress, and emerging applications of Rydberg atom-based sensing, emphasizing their potential for next generation quantum metrology, wireless communication, and precision field mapping.

Photonics•Dec 12, 2025•14 citations

Quantum Radio-Frequency Rydberg Sensors and mid-infrared photodetectors (Invited)

Muthugalage I. U. Weerasinghe, Ryan Verghese, Dinelka Somaweera +5 more

Quantum Rydberg sensors enable absolute, SI-traceable electric-field measurements using atomic transitions as fixed references. Their room-temperature operation, optical readout, and native nonlinearities provide broadband detection without antennas or calibration-sensitive front ends, offering clear advantages in high-EMI or harsh environments. A single rubidium vapor cell can detect signals from a few Megahertz to tens of Gigahertz. In our laboratories, we constructed a compact Rydberg sensor that detects fields from 3 MHz to 4 GHz using a single rubidium cell, demonstrating wideband detection with no hardware reconfiguration. By exploiting atomic mixing, this range can extend well above 10 GHz. Separately, we developed a tungsten-carbide photodetector integrated on silicon, extending silicon’s detection range from the visible to the mid-infrared. The device achieves responsivities up to $0.5 \mathrm{~A} / \mathrm{W}$ at 3286 nm, demonstrating a CMOS-compatible pathway for broadband mid-IR sensing. Together, these technologies expand electromagnetic-sensing capability across RF and infrared domains.

International Conference on Transparent Optical Networks•Jul 1, 2026•0 citations

Key Metrics Analysis of Rydberg Microwave Receivers

Jiarui Chen, Xiaoguo Huang, Menglei Zhu +3 more

Rydberg atoms are atoms in their highly excited energy states. The physical properties of Rydberg atoms in the presence of external fields play an important role in quantum precision measurement. In recent years, radio-frequency electric field sensing based on Rydberg atoms has attracted significant interest. It is widely recognized as an electromagnetic sensing system fundamentally different from traditional ones. As a quantum sensor, it is expected to surpass several foundational limitations of traditional receivers, such as sensitivity, dynamic range and frequency bandwidth. It was reported that Rydberg sensing systems can sense microwaves of frequencies from DC up to 1THz. Its quantum nature would possibly avoid internal thermal (Johnson) noise, even at room temperature. Recent demonstrations have also observed high precision for terahertz imaging, strong fields sensing, proof-of-principle communication. However, limitations of this novel system have not been addressed, especially for a practical radar, communication or electronic warfare system. Here in this work, we first compare the architectures of different microwave receivers and then analyze the metrics of Rydberg microwave receivers, such as instantaneous bandwidth and dynamic range based on experimental results. We concluded by pointing out several main obstacles to overcome for realizing a practical state-of-the-art microwave receiver.

Photonics & Electromagnetics Research Symposium (PIERS)•Nov 21, 2021•3 citations

Electromagnetic Field Sensing with Rydberg Atoms in Vapor Cells

Ma, Lu

Research of hot atomic vapor systems has a long history. Recently, much-improved technologies, such as lasers, microwaves and digital/analog control systems, have led to exciting progress in this reviving field. Due to its cryogenic-free and vacuum-free deployment potential, room-temperature and quantum-enabled sensing devices using gaseous atoms have become a popular research topic, and engineering such devices has received considerable attention. Proof-of-principle experiments have been performed demonstrating new ideas such as quantum-enhanced motion sensors, next-generation magnetometers, Rydberg enabled microwave sensors, etc. This thesis focuses on my work related to electromagnetic-field sensing using Rydberg atoms in vapor cells, where Rydberg atoms are excited and detected by electromagnetically induced transparency (EIT) spectroscopy. I first investigate the detection of strong magnetic fields ($sim$ 1~T) in the Paschen-Back regime. The diamagnetic (quadratic) response of the Rydberg levels makes the atoms sensitive to small fluctuations in field strength on a large background. By implementing an isotope-mixed cell, we demonstrate that accurate measurement, within a relative uncertainty of $pm 0.12$%. Many Rydberg-enabled radio frequency and microwave sensing applications require a capability of zeroing or intentional tuning of small DC electric fields inside the vapor cell. For this purpose, I explore an in-situ DC electric-field sensing and tuning method without using any bulk or thin film electrodes. I find that the photoelectric effect on the vapor cell walls (with invisible, atomic Rb aggregate layers covering the surfaces) can generate tuning fields up to 0.8~V/cm, with an inhomogeneity of about 2%. The spatial distribution of these fields can be directly monitored by quadratic Stark shifts of the Rydberg atoms. This work may inspire new approaches for DC-field control in miniaturized, metal-free atomic vapor-cell devices. Like many other quantum measurements on hot gaseous samples, short interaction time and other technical decoherence processes are the major factors which limit the precision and, in certain cases, the accuracy of the metrological results. In order to study these effects in the context of EIT, I performed an EIT experiment using a $Lambda$-type quantum system consisting of the hyperfine ground states and the first excited electronic state of the Rb atoms contained in a buffer-gas-free thermal vapor cell without anti-relaxation coating. Technical line-broadening effects due to inhomogeneity of stray magnetic fields, laser frequency jitter, transverse beam intensity distribution, interaction time distribution, and atom-wall/impurity gas collisions are studied. Experimental results and numerical simulations are compared. These results provide crucial information and quantitative insights for vapor cell sensor design. The development of compact and multi-functional spectroscopy vapor cells is widely considered to be a critical engineering step towards manufacturing field-deployable sensors for real life applications. My R&D efforts towards fabrication of glass spectroscopy cells with integrated, highly-conductive silicon components are presented in the last part of my thesis. I explored various technical challenges and successfully developed a proof-of-principle prototype from scratch. The device allows the application of electric fields inside the cell for particle trapping and for tuning Rydberg transitions. Further, the highly-conductive silicon components enable microwave polarization filtering for microwave sensing applications, plasma-physics studies, etc. Preliminary experimental/technical data and simulations are presented. In summary, in my thesis I report on a comprehensive study of several spectroscopic and field sensing applications of Rydberg and ground-state atoms in vapor cells, as well as forays into novel methods to engineer vapor cells with embedded electrodes.

•Jan 1, 2021•1 citation

Quantum sensing of microwave electric fields based on Rydberg atoms

Jinpeng Yuan, Wenguang Yang, Mingyong Jing +6 more

Microwave electric field (MW E-field) sensing is important for a wide range of applications in the areas of remote sensing, radar astronomy and communications. Over the past decade, Rydberg atoms have been used in ultrasensitive, wide broadband, traceable, stealthy MW E-field sensing because of their exaggerated response to MW E-fields, plentiful optional energy levels and integratable preparation methods. This review first introduces the basic concepts of quantum sensing, the properties of Rydberg atoms and the principles of quantum sensing of MW E-fields with Rydberg atoms. An overview of this very active research direction is gradually expanding, covering the progress of sensitivity and bandwidth in Rydberg atom-based microwave sensing, superheterodyne quantum sensing with microwave-dressed Rydberg atoms, quantum-enhanced sensing of MW E-field and recent advanced quantum measurement systems and approaches to further improve the performance of MW E-field sensing. Finally, a brief outlook on future development directions is provided.

arXiv:2401.01655•Reports on Progress in Physics•Aug 21, 2023•110 citations
Abstract Rydberg atoms in a room-temperature gas cell can be used for very sensitive detection of electrical fields in the megahertz to terahertz region. Sensors can be small, non-absorbing and are not destroyed by very strong fields with full-optical readout. Applications in communications, imaging and radar, and in metrology are foreseen. Military research is active, particularly in the USA, funding at first academic institutions, but increasingly development is contracted to commercial firms. There are similarities and differences between civilian and military applications, with interaction between both fields. Rydberg-atom electrical-field sensors are a general-purpose technology, and do not directly provide new offensive or threatening military options. No strong negative impacts on international security and peace are foreseen. Academic researchers have taken military funding readily.
Rydberg atom electric field sensors are projected to enable novel capabilities for resilient communications and sensing. This quantum sensor is small-size, highly sensitive, and broadly tunable, and it has the potential for performing precision vector electric field and angle-of-arrival measurements. While these atomic electric field sensors will not replace traditional receivers in commodity applications for RF signal reception, these sensors could be an enabling technology in niche application spaces. This review outlines the principles of operation of atomic electric field sensors and compares their performance capabilities to traditional RF receivers. It also highlights recent research and development efforts in atomic electric field sensing and identifies applications for which these sensors are projected to impact communications and remote sensing.
Rydberg atoms are neutral atoms excited to high principal quantum number states, which endows them with exaggerated properties such as large electric dipole moments, long lifetimes, and extreme sensitivity to external electromagnetic fields. These characteristics form the foundation of Rydberg atom-based sensors, an emerging class of quantum devices capable of optically detecting electric fields across frequencies from DC to the terahertz regime. Rydberg-based electrometry operates through both Autler–Townes (AT) splitting of resonant Rydberg transitions and Stark-shift measurements for high-frequency or far-detuned fields, enabling broadband field sensing from DC to the THz regime. Using ladder-type electromagnetically induced transparency (EIT) and AT splitting, these sensors enable non-invasive, SI-traceable measurements of field amplitude, frequency, phase, and polarization. Recent developments have demonstrated broadband electric field probes, voltage calibration standards, and compact RF receivers based on thermal vapor cells and integrated photonic architectures. Furthermore, innovations in multi-photon EIT, superheterodyne readout, and multi wave mixing have expanded the dynamic range and bandwidth of Rydberg-based electrometry. Despite challenges related to environmental perturbations, linewidth broadening, and laser stabilization, ongoing advances in atomic control, hybrid photonic integration, and EIT-based readout promise scalable, chip-compatible sensors. This review summarizes the physical principles, experimental progress, and emerging applications of Rydberg atom-based sensing, emphasizing their potential for next generation quantum metrology, wireless communication, and precision field mapping.
Quantum Rydberg sensors enable absolute, SI-traceable electric-field measurements using atomic transitions as fixed references. Their room-temperature operation, optical readout, and native nonlinearities provide broadband detection without antennas or calibration-sensitive front ends, offering clear advantages in high-EMI or harsh environments. A single rubidium vapor cell can detect signals from a few Megahertz to tens of Gigahertz. In our laboratories, we constructed a compact Rydberg sensor that detects fields from 3 MHz to 4 GHz using a single rubidium cell, demonstrating wideband detection with no hardware reconfiguration. By exploiting atomic mixing, this range can extend well above 10 GHz. Separately, we developed a tungsten-carbide photodetector integrated on silicon, extending silicon’s detection range from the visible to the mid-infrared. The device achieves responsivities up to 0.5 A/W0.5 \mathrm{~A} / \mathrm{W}0.5 A/W at 3286 nm, demonstrating a CMOS-compatible pathway for broadband mid-IR sensing. Together, these technologies expand electromagnetic-sensing capability across RF and infrared domains.
Rydberg atoms are atoms in their highly excited energy states. The physical properties of Rydberg atoms in the presence of external fields play an important role in quantum precision measurement. In recent years, radio-frequency electric field sensing based on Rydberg atoms has attracted significant interest. It is widely recognized as an electromagnetic sensing system fundamentally different from traditional ones. As a quantum sensor, it is expected to surpass several foundational limitations of traditional receivers, such as sensitivity, dynamic range and frequency bandwidth. It was reported that Rydberg sensing systems can sense microwaves of frequencies from DC up to 1THz. Its quantum nature would possibly avoid internal thermal (Johnson) noise, even at room temperature. Recent demonstrations have also observed high precision for terahertz imaging, strong fields sensing, proof-of-principle communication. However, limitations of this novel system have not been addressed, especially for a practical radar, communication or electronic warfare system. Here in this work, we first compare the architectures of different microwave receivers and then analyze the metrics of Rydberg microwave receivers, such as instantaneous bandwidth and dynamic range based on experimental results. We concluded by pointing out several main obstacles to overcome for realizing a practical state-of-the-art microwave receiver.
Research of hot atomic vapor systems has a long history. Recently, much-improved technologies, such as lasers, microwaves and digital/analog control systems, have led to exciting progress in this reviving field. Due to its cryogenic-free and vacuum-free deployment potential, room-temperature and quantum-enabled sensing devices using gaseous atoms have become a popular research topic, and engineering such devices has received considerable attention. Proof-of-principle experiments have been performed demonstrating new ideas such as quantum-enhanced motion sensors, next-generation magnetometers, Rydberg enabled microwave sensors, etc. This thesis focuses on my work related to electromagnetic-field sensing using Rydberg atoms in vapor cells, where Rydberg atoms are excited and detected by electromagnetically induced transparency (EIT) spectroscopy. I first investigate the detection of strong magnetic fields (simsimsim 1~T) in the Paschen-Back regime. The diamagnetic (quadratic) response of the Rydberg levels makes the atoms sensitive to small fluctuations in field strength on a large background. By implementing an isotope-mixed cell, we demonstrate that accurate measurement, within a relative uncertainty of pm0.12pm 0.12pm0.12%. Many Rydberg-enabled radio frequency and microwave sensing applications require a capability of zeroing or intentional tuning of small DC electric fields inside the vapor cell. For this purpose, I explore an in-situ DC electric-field sensing and tuning method without using any bulk or thin film electrodes. I find that the photoelectric effect on the vapor cell walls (with invisible, atomic Rb aggregate layers covering the surfaces) can generate tuning fields up to 0.8~V/cm, with an inhomogeneity of about 2%. The spatial distribution of these fields can be directly monitored by quadratic Stark shifts of the Rydberg atoms. This work may inspire new approaches for DC-field control in miniaturized, metal-free atomic vapor-cell devices. Like many other quantum measurements on hot gaseous samples, short interaction time and other technical decoherence processes are the major factors which limit the precision and, in certain cases, the accuracy of the metrological results. In order to study these effects in the context of EIT, I performed an EIT experiment using a LambdaLambdaLambda-type quantum system consisting of the hyperfine ground states and the first excited electronic state of the Rb atoms contained in a buffer-gas-free thermal vapor cell without anti-relaxation coating. Technical line-broadening effects due to inhomogeneity of stray magnetic fields, laser frequency jitter, transverse beam intensity distribution, interaction time distribution, and atom-wall/impurity gas collisions are studied. Experimental results and numerical simulations are compared. These results provide crucial information and quantitative insights for vapor cell sensor design. The development of compact and multi-functional spectroscopy vapor cells is widely considered to be a critical engineering step towards manufacturing field-deployable sensors for real life applications. My R&D efforts towards fabrication of glass spectroscopy cells with integrated, highly-conductive silicon components are presented in the last part of my thesis. I explored various technical challenges and successfully developed a proof-of-principle prototype from scratch. The device allows the application of electric fields inside the cell for particle trapping and for tuning Rydberg transitions. Further, the highly-conductive silicon components enable microwave polarization filtering for microwave sensing applications, plasma-physics studies, etc. Preliminary experimental/technical data and simulations are presented. In summary, in my thesis I report on a comprehensive study of several spectroscopic and field sensing applications of Rydberg and ground-state atoms in vapor cells, as well as forays into novel methods to engineer vapor cells with embedded electrodes.
Microwave electric field (MW E-field) sensing is important for a wide range of applications in the areas of remote sensing, radar astronomy and communications. Over the past decade, Rydberg atoms have been used in ultrasensitive, wide broadband, traceable, stealthy MW E-field sensing because of their exaggerated response to MW E-fields, plentiful optional energy levels and integratable preparation methods. This review first introduces the basic concepts of quantum sensing, the properties of Rydberg atoms and the principles of quantum sensing of MW E-fields with Rydberg atoms. An overview of this very active research direction is gradually expanding, covering the progress of sensitivity and bandwidth in Rydberg atom-based microwave sensing, superheterodyne quantum sensing with microwave-dressed Rydberg atoms, quantum-enhanced sensing of MW E-field and recent advanced quantum measurement systems and approaches to further improve the performance of MW E-field sensing. Finally, a brief outlook on future development directions is provided.