Quantum physics describes the universe on a microscopic scale. Even though this scale is not accessible without complex experimental setups, quantum effects are respon- sible for the properties of matter and in some instances we have learned to exploit them technologically. A modern computer constituted of transistors passively utilizes the quantum nature of charge carriers in the band structure of semiconductors to encode and process information. Although such a classical computer is a formidable tool already, what could be achieved with active control over the quantum states in the computer is an intriguing question. This is the idea of the quantum computer, which offers an entirely new paradigm of computing by encoding information in quantum binary digits (qubits). Indeed, for several applications it has been shown that a quantum computer is superior to its classical counterpart, even though its realization remains elusive up to date. One candidate to host qubits are gate-defined semiconductor quantum dots, confin- ing single or few charge carriers with spin. The spin of a single confined electron is a quantum two-level system which can be manipulated and measured, allowing the storage and processing of quantum information. This thesis can be viewed as part of the endeavor to give birth to quantum computers based on semiconductor spin qubits. It primarily focuses on the challenge to enable scalable architectures of well-characterized qubits. In the first part, spin shuttling is investigated. This denotes the coherent transport of a single spin between spatially separate nodes of a quantum processor, driven by a time-dependent electric potential. The object of study is a minimal version of a bucket- brigade-like spin shuttling between two quantum dots. The probability of maintaining the spin state is identified as figure of merit and the effect of spin-orbit interaction and the Zeeman effect in an inhomogeneous magnetic field is explored with analytical and numerical methods. Special attention is paid to the repercussions of near-degenerate valleys. The second part of the thesis addresses the challenge to probe the microscopic properties of a quantum dot array, which is a crucial first step before any quantum operation can be performed. The transmission of a microwave resonator coupled to a triple quantum dot occupied by two electrons is investigated, and a scheme to infer the exchange interaction between electrons in adjacent quantum dots is proposed. By means of analytical derivations it is shown that the transmission profile of the resonator directly reveals the value of the exchange coupling strength between two electrons. This holds even if magnetic gradients or a valley splitting comparable to the inter-dot tunnel coupling are included. Subsequently, quantum transport measurements in the Pauli blockade regime are modelled in the presence of a microwave resonator, bringing together two powerful techniques to probe quantum dots. Based on generalized input-output theory, a theoretical framework is derived to investigate how a double quantum dot in a transport setup interacts with a coupled microwave resonator while the current through the double qauntum dot is rectified by Pauli blockade. It is shown that the output field of the resonator can be used to infer the leakage current and thus obtain insight into the blockade mechanisms and to estimate a large number of parameters of the quantum dots. Furthermore, the back-action of the resonator photons on the steady state leakage current is described and quantified. In the context of Pauli blockade, the spin and valley physics of bilayer graphene quantum dots in the few-electron regime is touched upon, describing a situation where spin blockade is observed despite the presence of the valleys. In the final part of the thesis, the attention is shifted towards the readout of the spin qubits. A new paradigm of dispersive readout is devised, which is performed while the qubit dephases, implementing a measurement in the x-basis. Laplace transforming the time dependent cavity response allows a separation of contributions from multiple qubits coupled to the same resonator. Thus, they can be read out simultaneously in a single shot. Modelling silicon spin qubits, as an example, results in in a readout time that compares favourably to conventional dispersive readout with comparable fidelity, even for a single qubit. With an auxiliary qubit the readout scheme can be extended to a quantum non-demolition measurement.
Quantum physics describes the universe on a microscopic scale. Even though this scale is not accessible without complex experimental setups, quantum effects are respon- sible for the properties of matter and in some instances we have learned to exploit them technologically. A modern computer constituted of transistors passively utilizes the quantum nature of charge carriers in the band structure of semiconductors to encode and process information. Although such a classical computer is a formidable tool already, what could be achieved with active control over the quantum states in the computer is an intriguing question. This is the idea of the quantum computer, which offers an entirely new paradigm of computing by encoding information in quantum binary digits (qubits). Indeed, for several applications it has been shown that a quantum computer is superior to its classical counterpart, even though its realization remains elusive up to date. One candidate to host qubits are gate-defined semiconductor quantum dots, confin- ing single or few charge carriers with spin. The spin of a single confined electron is a quantum two-level system which can be manipulated and measured, allowing the storage and processing of quantum information. This thesis can be viewed as part of the endeavor to give birth to quantum computers based on semiconductor spin qubits. It primarily focuses on the challenge to enable scalable architectures of well-characterized qubits. In the first part, spin shuttling is investigated. This denotes the coherent transport of a single spin between spatially separate nodes of a quantum processor, driven by a time-dependent electric potential. The object of study is a minimal version of a bucket- brigade-like spin shuttling between two quantum dots. The probability of maintaining the spin state is identified as figure of merit and the effect of spin-orbit interaction and the Zeeman effect in an inhomogeneous magnetic field is explored with analytical and numerical methods. Special attention is paid to the repercussions of near-degenerate valleys. The second part of the thesis addresses the challenge to probe the microscopic properties of a quantum dot array, which is a crucial first step before any quantum operation can be performed. The transmission of a microwave resonator coupled to a triple quantum dot occupied by two electrons is investigated, and a scheme to infer the exchange interaction between electrons in adjacent quantum dots is proposed. By means of analytical derivations it is shown that the transmission profile of the resonator directly reveals the value of the exchange coupling strength between two electrons. This holds even if magnetic gradients or a valley splitting comparable to the inter-dot tunnel coupling are included. Subsequently, quantum transport measurements in the Pauli blockade regime are modelled in the presence of a microwave resonator, bringing together two powerful techniques to probe quantum dots. Based on generalized input-output theory, a theoretical framework is derived to investigate how a double quantum dot in a transport setup interacts with a coupled microwave resonator while the current through the double qauntum dot is rectified by Pauli blockade. It is shown that the output field of the resonator can be used to infer the leakage current and thus obtain insight into the blockade mechanisms and to estimate a large number of parameters of the quantum dots. Furthermore, the back-action of the resonator photons on the steady state leakage current is described and quantified. In the context of Pauli blockade, the spin and valley physics of bilayer graphene quantum dots in the few-electron regime is touched upon, describing a situation where spin blockade is observed despite the presence of the valleys. In the final part of the thesis, the attention is shifted towards the readout of the spin qubits. A new paradigm of dispersive readout is devised, which is performed while the qubit dephases, implementing a measurement in the x-basis. Laplace transforming the time dependent cavity response allows a separation of contributions from multiple qubits coupled to the same resonator. Thus, they can be read out simultaneously in a single shot. Modelling silicon spin qubits, as an example, results in in a readout time that compares favourably to conventional dispersive readout with comparable fidelity, even for a single qubit. With an auxiliary qubit the readout scheme can be extended to a quantum non-demolition measurement.
This dissertation describes a set of experiments with the goal of creating a super-conductor-semiconductor hybrid circuit quantum electrodynamics architecture with single electron spins. Single spins in silicon quantum dots have emerged as attractive qubits for quantum computation. However, how to scale up spin qubit systems remains an open question. The hybrid architecture considered here could provide a route to realizing large networks of quantum dot–based spin qubit registers. The first experiment in this thesis is aimed at achieving strong coupling between a single electron spin and a single microwave photon. The electron is trapped in a gate-defined double quantum dot in a Si/SiGe heterostructure and the photon is stored in an on-chip superconducting high-impedance NbTiN cavity. The photon is coupled directly to the electron charge, and indirectly to the electron spin, mediated through a synthetic spin-orbit field. We observe a vacuum Rabi splitting that depends on the spin-charge hybridization. The ratio of spin-photon coupling strength to decoherence rates of the spin and cavity combined is larger than unity, confirming the strong coupling regime has been reached. In addition, we find an optimal degree of spin-charge hybridization for which this ratio is maximized. The demonstration of strong spin-photon coupling not only opens a new range of physics experiments, but fulfills also a crucial requirement for coupling spin qubits at a distance via a cavity. The second experiment is focused on spin readout with the on-chip cavity. Instead of the direct dispersive readout of a single spin, we use the cavity to detect whether the electron is allowed to tunnel between the two dots or not. We benchmark the charge sensitivity and bandwidth of the detector and find that rapid detection of the electron charge with high SNR is possible. In the two-electron regime, electron tunneling is contingent on the total spin state (Pauli spin blockade). This spin-to-charge conversion scheme enables single-shot detection of singlet states with high-fidelity. The demonstration of single-shot spin readout with a cavity is an essential step towards readout in dense spin qubit arrays, such as the crossbar network, where it is not possible to integrate electrometers and accompanying reservoirs adjacent to the qubit dots. In the third experiment, we develop on-chip microwave filters to suppress microwave photon leakage from the cavity through the gate electrodes that are necessary to form quantum dots. We introduce a new cavity design that is compatible with long-distance connectivity between spins, but is also more susceptible to microwave leakage. We test and compare two low-pass filter variations in terms of performance, footprint and integrability. They use the same nanowire inductor, but different implementations of the capacitor: one with a planar interdigitated capacitor and one novel design with an overlapping thin-film capacitor. We find that both approaches are effective against microwave leakage. However, the large footprint of the interdigitated capacitor makes this solution inconvenient as the number of gate lines increases. The thin-film capacitor, with its much smaller footprint, is better suited for our devices. The final part of this dissertation contains concluding remarks and possible future directions are proposed.
This thesis addresses the concept of quantum computing with semiconductor quantum dots. The basic unit of a quantum computer is a quantum mechanical two-level system, the so-called quantum bit (qubit). The qubit can be defined as the spin of an electron confined in a quantum dot or as a two-dimensional subspace of the Hilbert space for several spins. Some semiconductors have several minima in their conduction band, socalled valleys. A two-dimensional valley degree of freedom can also be considered as a qubit. In this thesis, quantum registers storing spin as well as valley qubits are described theoretically. Virtual hopping yields an exchange interaction between neighboring quantum dots, which reduces the energy of antisymmetric spin-valley states according to the Pauli principle. Considering the spin and the valley degrees of freedom of two electrons in neighboring quantum dots as qubits, the exchange interaction is a four-qubit interaction. In this thesis, it will be shown that it is, nevertheless, possible to generate a universal two-qubit gate for spin qubits or for valley qubits by combining the exchange interaction and individual single-qubit gates. The exchange interaction in this two-electron double quantum dot directly provides a universal two-qubit gate for one spin and one valley qubit as well. For this, the qubits are defined as suitable subspaces, spanned by the singlet and one triplet state of the spin and the valley states, respectively, Using those gates, arbitrary quantum operations can be performed for single-spin and single-valley qubits in the same quantum register, where in one double quantum dot the quantum states are restricted to the singlet-triplet subspace. While in this register single-spin and single-valley rotations are required, these gates are dispensable in a quantum register storing spin and valley singlet-triplet qubits. The single-qubit operations, in this case, can be provided by the exchange interaction and a gradient in the energy splitting of spin and valley states when the spin qubit is stored in a double quantum dot with spin degrees of freedom only and when the spin states in the double quantum dot which stores the valley qubit are polarized. For providing the two-qubit gate, the spin and the valley qubits need to be stored in the same double quantum dot. The crucial task for this register is to interchange the spin of a spin-only and a spin-valley quantum dot in order to switch between the single-qubit and the two-qubit operation mode. This interchanging of the spin can be achieved by a valley-depending virtual hopping between the quantum dots. Furthermore, echo sequences for a so-called exchange-only qubit are considered. An exchange-only qubit is defined as a subspace in a system of three electron spins in a triple quantum dot. An inhomogeneous magnetic field, which may be caused by nuclear spins in the semiconductor, can lead to decoherence and leakage, i.e., the state might leave the qubit subspace. Suppressing this effect by an echo sequence which consists of pulses interchanging neighboring spin states, so-called SWAP gates, was proposed. Controllability over these quantum operations is provided via the exchange interaction. In this thesis, the performance of different such sequences is investigated. The analysis shows that optimization strategies developed for single spin echoes can be adapted for the three spin system. The echo sequences can be different in their order of applied SWAP gates interchanging the spins in the first and second dots or in the second and third dots. The noise suppression performance depends slightly on this order of SWAP gates. For two spins in a double quantum dot a scheme for quantum state tomography is presented. The corresponding measurement operators are constructed from a set of mutually unbiased bases of the four-dimensional two-qubit Hilbert space. These measurements are represented by short sequences of no more than three elementary quantum gates and projective measurements by the well-established spin-to-charge conversion.
The growing interest in quantum computers has triggered various approaches for the realization of a large-scale quantum processor that can eventually outperform classical high-performance computers. Quantum computers are attracting increasing attention for their potential to enormously accelerate the simulation of quantum systems and the solution of optimization problems, promising an immense impact, particularly in fields such as chemistry, medicine, and cybersecurity. Although it is still a long way to a practical quantum device, the progress over the last decades has shown encouraging results for a so far limited number of quantum bits, or qubits for short, which represent the computational units of the processor. One promising platform for the implementation of qubits is the spin of charge carriers in semiconductor quantum dots. Especially the use of purified silicon as a host material has significantly improved the performance of quantum operations. Advanced fabrication techniques from the established semiconductor industry in principle allow for the manufacturing of a large number of qubits on a small chip, making them specifically competitive from the perspective of scalability. In this thesis, we investigate challenges for electron spin qubits, particularly in the context of scaling to large qubit arrays for quantum computation. We evaluate the performance of quantum gates, present error mitigation strategies, and propose new quantum operations for two particular spin qubit implementations. In a dense array of Loss-DiVincenzo spin qubits on a chip, quantum information can be electrically controlled by microwave pulses. For neighboring qubits, capacitive couplings of nearby electrodes lead to crosstalk that affects the quantum computation. The first examination in this thesis addresses the effect of crosstalk on idling and operating spin qubits due to an interfering microwave drive. After the analysis and characterization of the performance, we suggest mitigation protocols for different constellations of important quantum gates, which can be easily implemented experimentally. We further show how to reduce crosstalk in a two-qubit gate using an asymmetric driving scheme, resulting in an enormous improvement of the gate performance, and may be used to generally overcome the obstacle of crosstalk. An additional source of errors in spin qubit registers originates from the finite residual exchange interaction between neighboring qubits. It arises due to a finite overlap of the electron wave functions and is caused by the limited speed at which the applied voltages can be controlled. We evaluate the fidelity of doing quantum operations under these circumstances with a varying number of neighboring qubits and present robust mitigation schemes with a decent performance also in the presence of noise. Besides crosstalk, another crucial observation in experiments using microwaves is the heating caused by the delivery of high-power radio frequency pulses to the quantum chip and results in a change of the qubit properties. We therefore investigate the impact of phonons on the energy levels in spin qubits to identify a temperature-dependent correction to the qubit state splitting. As microwave pulses are associated with potential errors, exchange-only qubits represent a promising alternative to achieve universal quantum computation only using baseband control. Therefore, we shift our focus towards exchange-only qubits and outline the main error sources in these systems, including residual exchange interactions between spins, charge noise from the applied voltages, and magnetic fluctuations in the material. A consequential complication of this implementation is that the quantum information can leak out of the qubit states. This effect, however, can be reduced in the presence of a finite magnetic field, as we will demonstrate in this thesis. The gate construction for exchange-only qubits usually requires more pulse steps than in the previous qubit type. Nevertheless, if exchange interactions are switched on simultaneously, this can result in faster quantum gates, as we demonstrate in this thesis. Especially the discovery of a quantum operation that introduces relative phases between computational and leakage states can be of interest for the construction of two-qubit gates and will be discussed in an example for a special operation space.
Quantum information processing in semiconductor quantum dots using single and multi-spin qubitsThe idea of a quantum computer, a device capable of processing information using quantum bits (qubit) instead of classical bits that outperforms classical computer in terms of computation speed, is still science ction. However, recent advances in quantum information processing showed that this ction may come true faster than anticipated. A promising platform for the physical realization of a qubit are spin qubits where the information is encoded in the quantum mechanical spin of an electron con ned in a semiconductor quantum dot. There are a variety of di erent implementations how the logical qubit is physically encoded, the use of a single electron spin or the use of the spins of multi electrons. This thesis focuses on the implementation of the spin- 1/2 qubit using the spin of a single electron in a single quantum dot, the exchangeonly (EO) qubit using three electron spins distributed in three quantum dots, and the novel quadrupolar exchange-only (QUEX) qubit using four electron spins distributed in three quantum dots. In this thesis we investigate several theoretical aspects of the physical implementation of the aforementioned qubit encodings. Since all three qubit encodings are allelectric controlled these implementations su er decoherence, the loss of information, from electric uctuations of the environment commonly called charge noise. Typically, the use of more quantum dots increases the decoherence due to charge noise while it decreases the decoherence due to magnetic noise. The rst main aspect investigated in this thesis is the protection of the quantum information encoded in the di erent qubit implementations against charge noise. Special attention is paid to the multi-electron spin implementations where high-symmetry points of operation are discovered which are less sensitive to the charge noise. Protection against charge noise is even better by increasing the number of electrons while keeping the number of quantum dots making the QUEX qubit superior to the EO qubit. So far the main direction in this thesis is the reduction of the qubit sensitivity to electric uctuations. However, coherent electromagnetic elds in form of microwaves v can be used to interconnect qubits. In this thesis also a high-performance coupling between two spin-1/2 is investigated. The use of a resonator, subsequently, allows for a coupling of qubits over macroscopic distances as well as to extract valuable information about the physical system. Because of the larger susceptibility of multi-spin qubits to the electric eld of the resonator, this thesis focuses on the coupling between an EO or a QUEX qubit and a microwave resonator. Points of operations are discovered for both qubit implementations which o er a strong coupling towards a microwave resonator while maintaining their protection against charge noise. Subsequently, a series of measurements are proposed to extract information about the microscopic structure of the quantum dots. Finally, a promising high-performance protocol for coupling two qubits remotely via the resonator is investigated in detail.
A two-level quantum system is the building block of a quantum computer. This pair of quantum states defines the computational unit of a quantum computer, and it is called a quantum bit or qubit in analogy to the bit that is the binary unit of a classical computer. The spin of a single electron naturally defines such a two-level quantum system. A quantum dot can be tuned to the single-electron regime, and an array of singly occupied quantum dots provides a multi-qubit register. This thesis describes the multielectron encoding of a spin qubit using a pair or a trio of quantum dots, and it analyzes the coherence properties and manipulation protocols of this system. The singlet-triplet qubit, coded using the singlet state and the spinless triplet state of a pair of singly occupied quantum dots, can be controlled all electrically when applying voltages to gates close to the quantum dot structure. Rapid, subnanosecond modifications of the double quantum dot's charge configuration have been realized successfully. A small magnetic field gradient across the double quantum dot enables universal qubit control. Two modifications of the normal singlet-triplet encoding are introduced. (1) The six-electron configuration of a double quantum dot encodes a singlet-triplet qubit in the same way as for the two-electron double quantum dot. Two electrons at each quantum dot are irrelevant for the qubit manipulations because they are paired in a singlet state; the remaining two electrons encode the qubit. The qubit's wave function is immune to charge noise at moderate out-of-plane magnetic fields. (2) A singlet-triplet qubit encoded using two quantum dots of different sizes has an orbital state degeneracy of the singlet state and the spinless triplet state at finite out-of-plane magnetic fields. Spin-orbit interactions lift this state degeneracy, while the magnitude of the state coupling is determined by the size difference of the QDs. This setup enables the manipulations of singlet-triplet qubits without the need for magnetic field gradients. Finally, two-qubit gates between singlet-triplet qubits are proposed that use mediated exchange interactions via one quantum state. These operations are well controlled and highly noise insensitive. Orbital interactions alone can control spin qubits coded in a three electron Hilbert space. For example, the exchange-only qubit is encoded using three singly occupied quantum dots. The exchange interactions of two quantum dot pairs need to be modified to manipulate this qubit. The noise sensitivity of the exchange-only qubit is discussed. Alternatively, a three-electron qubit at a double quantum dot can be operated when single electrons are transferred between the quantum dots. Fast, subnanosecond manipulations of the double quantum dot's charge configuration are required to realize single-qubit gates. A novel two-qubit pulse gate for the three-electron double quantum dot qubit is proposed.
Solid state based quantum information processing is focused on physical implementation of all necessary elements of quantum computation and quantum information in solid state systems, mainly due to their scalability compared to e.g. optical systems. Among many proposals to realize these types of devices, such as quantum dots as charge qubits or Josephson junction circuits, we study here one of the most promising candidates, i.e., the spin of an electron confined to a quantum dot as a qubit. Experimentally, it has been shown that the relaxation rate of this two level system can be pushed above few seconds in low magnetic fields. Moreover, using spin echo techniques, \nthe spin dephasing time can be maximized up to milliseconds with the current technology. This long spin decay time is one of the main reasons that make this system desirable for quantum computation and quantum information purposes. \nWe reexamined the recent measurement based proposal called one-way quantum computation which exploits entanglement and local measurements as tools to perform quantum computation on N qubits. Although it was suggested in the original work to entangle the qubits via the nearest neighbor Ising interaction, we investigated how one can generate the so-called cluster states with the Heisenberg interaction. We extended our method to include more general forms of Heisenberg interaction such as asymmetric coupling of adjacent qubits. These forms of couplings, rather than Ising interaction, are more encountered in solid state devices, and therefore make it possible to perform one-way quantum computation with electron spins in quantum dots coupled via exchange interaction to their adjacent spins. \n \nChapters II, III, and IV of my thesis are devoted to the study of the spin-orbit interaction in heterostructure quantum dots and its effect on the spin dynamics. We observed that one can actually use spin-orbit interaction to manipulate the spin state of an electron on time scales much smaller than the spin dephasing time. Specifically, in chapter II, we studied the effect of a nearby functioning quantum point contact (QPC) on the relaxation of the electron spin and show that the charge fluctuations in QPC lead to spin relaxation of the confined electron in the presence of spin-orbit interactiom and an applied magnetic field. We also addressed the relation of this rate to the microscopic parameters of the system and found some geometrical dependence of the spin relaxation time on the orientation of the QPC on the substrate. Moreover, we showed in chapters III and IV that the spin-orbit interaction can play a positive role, in order to rotate the spin around the Bloch sphere. We considered different mechanisms, particularly, Electron Dipole Spin Resonance (EDSR) and holonomic unitary gates in quantum dots. We verified that these mechanisms of spin manipulation can be realized in solid state systems with the state of the art semiconductor technologies. \n \nChapter V of the thesis covers a slightly different topic and focuses on the role of the Coulomb interaction in electronic transport. There, we reviewed the non-analytic corrections to the Fermi liquid behavior and their consequences on the momentum occupation number of the electrons in a two dimensional electron gas (2DEG). As an example, we calculated the tunneling rate from an interacting electron reservoir onto a quantum dot and compared our result to the corresponding case for electron tunneling between bilayer 2DEGs. Moreover, within RPA approximation, we found that the electron-plasmon coupling leads to a quadratic frequency dependence of the electron self-energy at low frequencies at the Fermi surface. This correction suppresses the same order corrections due to the particle-hole bubble. \n \n \n