The Standard Quantum Limit (SQL) in classical force detection using mechanical systems arises from quantum back-action, which disturbs the oscillator’s evolution during measurement. We present a theoretical analysis of a scheme that enables broadband back-action evading (BAE) force sensing by employing a multidimensional optical transducer. The proposed system consists of a mechanical oscillator coupled to an optical structure supporting three distinct optical modes, with mode spacing approximately matched to the mechanical resonance. The central mode is coherently pumped, and the signal is extracted by monitoring the light emitted from the adjacent sideband modes. By selecting appropriate optical quadratures for detection and applying tailored post-processing to the measurement data, our approach suppresses back-action noise across a wide frequency range, enabling sensitivity beyond the SQL. The architecture can be interpreted as a composite system hosting quantum-mechanics-free subsystems (QMFS), which effectively isolate the measured observable from quantum fluctuations by exploiting correlations akin to those found in systems with engineered “negative mass” response. We also show that the adjacent sideband modes are entangled and discuss possible methods for detecting this entanglement. This configuration opens a promising route toward high-precision quantum metrology without being constrained by quantum measurement noise.
The Standard Quantum Limit (SQL) in classical force detection using mechanical systems arises from quantum back-action, which disturbs the oscillator’s evolution during measurement. We present a theoretical analysis of a scheme that enables broadband back-action evading (BAE) force sensing by employing a multidimensional optical transducer. The proposed system consists of a mechanical oscillator coupled to an optical structure supporting three distinct optical modes, with mode spacing approximately matched to the mechanical resonance. The central mode is coherently pumped, and the signal is extracted by monitoring the light emitted from the adjacent sideband modes. By selecting appropriate optical quadratures for detection and applying tailored post-processing to the measurement data, our approach suppresses back-action noise across a wide frequency range, enabling sensitivity beyond the SQL. The architecture can be interpreted as a composite system hosting quantum-mechanics-free subsystems (QMFS), which effectively isolate the measured observable from quantum fluctuations by exploiting correlations akin to those found in systems with engineered “negative mass” response. We also show that the adjacent sideband modes are entangled and discuss possible methods for detecting this entanglement. This configuration opens a promising route toward high-precision quantum metrology without being constrained by quantum measurement noise.
The standard quantum limit (SQL) of a classical mechanical force detection results from quantum back action perturbing evolution of a mechanical system. In this paper we show that usage of a multidimensional optical transducer may enable a broadband quantum back action evading measurement. We study theoretically a corresponding technique of measurement of a resonant signal force acting on a linear mechanical oscillator coupled to a generic optical system with three optical modes with separation nearly equal to the mechanical frequency. The measurement is performed by optical pumping of the central optical mode and analyzing the light escaping the two other modes. By detecting optimal quadrature components of the optical modes and postprocessing the measurement results we are able to exclude the back action in a broad frequency band and characterize the force with sensitivity better than the SQL. We show that the proposed scheme is similar to the multidimensional system containing quantum-mechanics-free subsystems which can evade the SQL using the idea of the so-called negative mass [M. Tsang and C. M. Caves, Phys. Rev. X 2, 031016 (2012).].
The high-sensitivity quantum detection of a resonant classical force acting on a quantum harmonic oscillator can be significantly improved by employing a resonant optical parametric transducer. This technique leverages the unique properties of parametric interactions to enhance the response of the measurement system while maintaining quantum-limited performance. We demonstrate that such a configuration not only enables quantum back-action evading (BAE) measurements, surpassing the Standard Quantum Limit (SQL) of sensitivity, it also provides a mechanism for noiseless amplification of the classical signal. The key to this enhancement lies in the ability of the parametric transducer to generate and separately measure the upper and lower modulation sidebands induced by the external force. By decoupling and analyzing these sidebands independently, the system becomes capable of amplifying the signal without introducing additional noise, effectively circumventing quantum measurement constraints.
A broadband multidimensional variational measurement allows overcoming the Standard Quantum Limit (SQL) of a classical mechanical force detection for a mechanical oscillator. In this measurement quantum back action, which perturbs the evolution of a mechanical oscillator, can be completely removed in a broad detection frequency band after post-processing. The measurement is performed by optical pumping of the central optical mode and analyzing the light escaping the two other optical modes, which have the frequency separation with the central mode equal to the mechanical frequency. To realize such a scheme in practice one either needs to use a very long optical interferometer or should utilize optical modes belonging to different mode families. In the second case the modes have different geometries and their coupling with the mechanical mode is not identical. Here we analyze a general case of the non-symmetric measurement scheme, in which the coupling strengths with the light modes are not equal to each other, and take into account optical losses. We found that the back action can be completely excluded from the measurement result in the case of the asymmetric lossless system. The nonzero loss limits the sensitivity. An experimental implementation of the proposed scheme is discussed.
Advances in precision optomechanical measurement underpin a wide range of technologies, from inertial sensors to the detection of gravitational waves and the exploration of fundamental physics. For such applications, the ultimate sensitivity is limited by quantum noise: shot noise, which stems from the stochastic arrival of photons, dominates at high frequencies, while Quantum Back-Action (QBA) noise—arising from the random radiation-pressure force exerted by the light field—prevails at low frequencies. The interplay between these two contributions defines the Standard Quantum Limit (SQL) of interferometry, a power-dependent trade-off that constrains further performance improvements. Although several sub-SQL techniques have been demonstrated, they typically enhance narrow-band sensitivity or require long filter cavities. Coherent Quantum Noise Cancellation (CQNC), first proposed by Tsang and Caves, offers a broadband solution by introducing an Effective Negative-Mass Oscillator (ENMO) that destructively interferes with the QBA noise across the entire spectrum except at the mechanical resonance of the opto-mechanically coupled system. A mathematically equivalent scheme for broadband QBA evasion has been demonstrated—for example, using atomic ensembles. The operation of this scheme is restricted to specific atomic transition wavelengths and is therefore unsuitable for many optomechanical platforms. This thesis reports the first all-optical, table-top realisation of an ENMO capable of Coherent Quantum Noise Cancellation in quantum optomechanical sensors. The scheme employs an optical analogue of the optomechanical interaction, generated through a combination of parametric down-conversion and beam-splitting processes, yielding a tunable, wavelength-flexible, and compact system. The achieved parameters satisfy the CQNC targets established in earlier theoretical work, and the current system predicts a broadband quantum-noise reduction of 3.6 dB (77% suppression of QBA noise(in dB)) at the frequency of maximum suppression. With further reduction of intracavity losses, the projected cancellation improves to 11.9 dB (81% suppression (in dB)). The experimental realisation features two polarisation-coupled optical resonators that host a two-mode squeezing interaction; the optical resonators possess distinct detunings and linewidths. The interdependent nature of the ENMO system motivated the development of an in-situ characterisation method, which is essential for integrating the ENMO with an optomechanical system in practical applications. Adequately addressing the system’s complexity required the development of five specialised experimental techniques for parameter tuning and comprehensive characterisation. Beyond quantum-noise cancellation, this system lends itself to application in quantum-information and quantum-communication tasks, including an on-demand, high-purity single-photon source and a quantum memory. Owing to the optical platform’s immunity to thermal decoherence, it can be operated at room temperature, and the parametric down-conversion process affords flexibility in wavelength selection. The results presented here advance the state of the art in broadband quantum noise reduction in a broad class of optomechanical devices, with immediate relevance for emerging quantum-technology applications.
We theoretically investigate quantum measurement noise in a hybrid optomechanical system, focusing on radiation-pressure back-action and its impact on force sensing. The setup consists of an optomechanical cavity with a movable mirror, a fixed semitransparent mirror, an ensemble of quantum dots (QDs) coupled to the cavity mode, and an intracavity optical parametric amplifier (OPA). We show how the QD-induced response, together with the system nonlinearity, modifies the noise spectral density and thereby improves the force measurement sensitivity. In this setup, coherent quantum noise cancellation (CQNC) can completely remove the back-action noise. In addition, increasing the OPA pump gain enables sensitivity beyond the standard quantum limit (SQL) at reduced laser power. These combined effects allow weak-force sensing beyond the SQL.
We theoretically investigate quantum measurement noise in a hybrid optomechanical system, focusing on radiation pressure back action and its impact on force sensing. The setup consists of an optomechanical cavity with a movable mirror, a fixed semi transparent mirror, an ensemble of quantum dots (QD) coupled to the cavity mode, and an intracavity optical parametric amplifier (OPA). We show how the QD induced response, together with the system nonlinearity, modifies the noise spectral density and thereby improves the force measurement sensitivity. In this setup, coherent quantum noise cancellation (CQNC) can completely remove the back action noise. In addition, increasing the OPA pump gain enables sensitivity beyond the standard quantum limit (SQL) at reduced laser power. These combined effects allow weak force sensing beyond the SQL.