The belief propagation algorithm is desirable for a polar code based decoder, because of the potentially low latency and the ability of integration in digital signal processing units or other multi-core processor systems to parallelize the computations. Although belief propagation polar code decoder algorithms have the ability for a highly parallelized imple-mentation, the algorithms require many iterations to achieve a comparable frame error rate and bit error rate with respect to a successive cancellation polar code algorithm. The iterative nature of the belief propagation algorithms also result in a higher computational complexity, i.e. O(IN(2log_{2} N-1)) compared to the computational complexity O(Nlog_{2}N) of the successive cancellation decoder algorithm. In this paper we propose several simplifications for a simplified belief propagation algorithm for polar code decoders, where the arithmetic complexity of the nodes is reduced. The proposed belief propagation algorithm shows preliminary results of a net reduction of the arithmetic complexity of ≈ 13%. This reduction is a result of the reduced number of arithmetic operations, i.e., additions, compares, and multiplications, without a lost in error-correcting performance.
The belief propagation algorithm is desirable for a polar code based decoder, because of the potentially low latency and the ability of integration in digital signal processing units or other multi-core processor systems to parallelize the computations. Although belief propagation polar code decoder algorithms have the ability for a highly parallelized imple-mentation, the algorithms require many iterations to achieve a comparable frame error rate and bit error rate with respect to a successive cancellation polar code algorithm. The iterative nature of the belief propagation algorithms also result in a higher computational complexity, i.e. O(IN(2log_{2} N-1)) compared to the computational complexity O(Nlog_{2}N) of the successive cancellation decoder algorithm. In this paper we propose several simplifications for a simplified belief propagation algorithm for polar code decoders, where the arithmetic complexity of the nodes is reduced. The proposed belief propagation algorithm shows preliminary results of a net reduction of the arithmetic complexity of ≈ 13%. This reduction is a result of the reduced number of arithmetic operations, i.e., additions, compares, and multiplications, without a lost in error-correcting performance.
The belief propagation algorithm is one of the preferred algorithms for a polar code based decoder that can potentially achieve the lowest latency. Although belief propagation polar code algorithms have the ability for a highly parallelized implementation, they require more iterations to achieve a comparable frame error rate and bit error rate compared to the successive cancellation polar code algorithm. The iterative nature of the belief propagation algorithms also results in a higher computational complexity, i.e. O(N(2log2N-1)) compared to the computational complexity O(Nlog2N) of the successive cancellation decoder algorithm. In this paper we propose several software implementations of belief propagation polar code decoders using the computational complexity reduced belief propagation algorithm and the enhanced loop-weakened belief propagation algorithm, to increase the number of decoded codes per second. Compared to a baseline belief propagation implementation, our proposed radix-2 and radix-4 implementations increase the throughput by approximately 15.4% and 22.04% respectively. This gain is the result of a reduction of arithmetic operations, i.e., additions, compares, and multiplications, which is obtained without a loss in error-correcting performance.
A polar code decoder based on the belief propagation algorithm is desirable because of the potentially low latency and its suitability for parallel execution on multicore and SIMD processors. However, current state-of-the-art algorithms require many iterations to achieve comparable bit and frame error rate compared to successive cancellation algorithms. Also, the current state-of-the-art belief propagation algorithms have a high computational complexity compared to successive cancellation. In this paper we present an enhanced belief propagation algorithm, in which parts of the computations are altered to reduce the negative effect of the short cycles in the polar code factor graph. Our proposed algorithm has a gain of approx+0.4mathbf{dB} in both frame and bit error rate compared to successive cancellation and a gain of approx+0.16mathbf{dB} and approx+0.13mathbf{dB} at a frame and bit error rate of 10-3 respectively, compared to belief propagation. Also, the maximum number of iterations of our algorithm is reduce to 0.6cdot I_{max}. As a result, the latency is up to approx 11 times lower compared to successive cancellation and up to approx 1.8 times lower compared to the current state-of-the-art belief propagation polar code algorithm. Furthermore, the reduction in the maximum iteration count results in a lower power consumption after implementation.
Belief propagation (BP) has attracted increasing attention due to its high parallelism. In this letter, a correction method is proposed to improve the block error rate (BLER) performance of the BP decoder for polar codes so that it is comparable to that of the successive cancellation list (SCL) decoder. Compared with BP flipping (BPF) decoding, the proposed decoder focuses on prior knowledge of the code bits in the factor graph. Two strategies have been proposed to construct the correction set. The simulation results show that the BPC decoder exhibits a BLER similar to that of BPF decoder while reducing the average latency and complexity by half. In addition, the BLER of the BPC decoder can approach that of the cyclic redundancy check (CRC)-aided SCL (CA-SCL) decoder in regions with low and medium signal-to-noise ratios (SNRs).
We propose a belief propagation list (BPL) decoder with comparable performance to the successive cancellation list (SCL) decoder of polar codes, which already achieves the maximum likelihood (ML) bound of polar codes for sufficiently large list size L. The proposed decoder is composed of multiple parallel independent belief propagation (BP) decoders based on differently permuted polar code factor graphs. A list of possible transmitted codewords is generated and the one closest to the received vector, in terms of Euclidean distance, is picked. To the best of our knowledge, the proposed BPL decoder provides the best performance of plain polar codes under iterative decoding known so far. The proposed algorithm does not require any changes in the polar code structure itself, rendering the BPL into an alternative to the SCL decoder, equipped with a soft output capability enabling, e.g., iterative detection and decoding to further improve performance. Further benefits are the lower decoding latency than the SCL decoder and the possibility of high throughput implementations. Additionally, we show that a different selection strategy of frozen bit positions can further enhance the error-rate performance of the proposed decoder.
Belief propagation (BP) decoding for polar codes has been extensively studied because of its inherent parallelism. However, its performance remains inferior to that of successive cancellation list decoding (SCL) due to the structure of the decoding graph. To improve the block error rate (BLER) performance, the BP correction (BPC) decoding, a post-processing scheme that corrects prior knowledge of the identified code bit, improves convergence by executing additional iterations on the failed BP decoder. Moreover, the BPC decoder demonstrates a better decoding performance than the BP-based bit-flipping decoder. Nevertheless, the additional decoding attempts lead to increased latency. In this article, a modified BPC decoder is proposed to reduce the number of decoding attempts by redefining the correction rules. A new metric is designed to effectively identify the corrected location. Numerical results show that the proposed modified BPC decoder achieves a slight improvement in BLER compared with the original BPC, with a dramatic reduction in average complexity. Furthermore, a higher-order version, named MBPC-Ω, is extended to further improve the performance, where the Ω is the maximum correction order. Numerical results show that the higher-order modified BPC achieves a similar BLER performance to existing multiple bit-flipping BP decoders but has around half the latency overhead. In addition, the proposed MBPC-2 decoder performs better than the cyclic redundancy check-aided SCL (CA-SCL) decoder with list size 4 and is slightly worse than the CA-SCL with list size 8 in high signal-to-noise ratio (SNR) regions but with significant decoding latency reduction.
Due to the design principle of parallel processing, belief propagation (BP) decoding is attractive, and it provides good error-correction performance compared with successive cancellation (SC) decoding. However, its error-correction performance is still inferior to that of successive cancellation list (SCL) decoding. Consequently, this paper proposes a novel flip-list- (FL)-enabled belief propagation (BP) method to improve the error-correction performance of BP decoding for polar codes with low computational complexity. The proposed technique identifies the vulnerable channel log-likelihood ratio (LLR) that deteriorates the BP decoding result. The FL is utilized to efficiently identify the erroneous channel LLRs and correct them for the next BP decoding attempt. The preprocessed channel LLR through FL improves the error-correction performance with minimal flipping attempts and reduces the computational complexity. The proposed technique was compared with the state-of-the-art BP, i.e., BP bit-flip (BP-BF), generalized BP-flip (GBPF), cyclic redundancy check (CRC)-aided (CA-SCL) decoding, and ordered statistic decoding (OSD), algorithms. Simulation results showed that the FL-BP had an excellent block error rate (BLER) performance gain up to 0.7 dB compared with BP, BP-BF, and GBPF decoder. Besides, the computational complexity was reduced considerably in the high signal-to-noise ratio (SNR) regime compared with the BP-BF and GBPF decoding methods.