Belief propagation (BP) has attracted increasing attention due to its high parallelism. In this letter, a correction method is proposed to improve the block error rate (BLER) performance of the BP decoder for polar codes so that it is comparable to that of the successive cancellation list (SCL) decoder. Compared with BP flipping (BPF) decoding, the proposed decoder focuses on prior knowledge of the code bits in the factor graph. Two strategies have been proposed to construct the correction set. The simulation results show that the BPC decoder exhibits a BLER similar to that of BPF decoder while reducing the average latency and complexity by half. In addition, the BLER of the BPC decoder can approach that of the cyclic redundancy check (CRC)-aided SCL (CA-SCL) decoder in regions with low and medium signal-to-noise ratios (SNRs).
Belief propagation (BP) has attracted increasing attention due to its high parallelism. In this letter, a correction method is proposed to improve the block error rate (BLER) performance of the BP decoder for polar codes so that it is comparable to that of the successive cancellation list (SCL) decoder. Compared with BP flipping (BPF) decoding, the proposed decoder focuses on prior knowledge of the code bits in the factor graph. Two strategies have been proposed to construct the correction set. The simulation results show that the BPC decoder exhibits a BLER similar to that of BPF decoder while reducing the average latency and complexity by half. In addition, the BLER of the BPC decoder can approach that of the cyclic redundancy check (CRC)-aided SCL (CA-SCL) decoder in regions with low and medium signal-to-noise ratios (SNRs).
Belief propagation (BP) decoding for polar codes has been extensively studied because of its inherent parallelism. However, its performance remains inferior to that of successive cancellation list decoding (SCL) due to the structure of the decoding graph. To improve the block error rate (BLER) performance, the BP correction (BPC) decoding, a post-processing scheme that corrects prior knowledge of the identified code bit, improves convergence by executing additional iterations on the failed BP decoder. Moreover, the BPC decoder demonstrates a better decoding performance than the BP-based bit-flipping decoder. Nevertheless, the additional decoding attempts lead to increased latency. In this article, a modified BPC decoder is proposed to reduce the number of decoding attempts by redefining the correction rules. A new metric is designed to effectively identify the corrected location. Numerical results show that the proposed modified BPC decoder achieves a slight improvement in BLER compared with the original BPC, with a dramatic reduction in average complexity. Furthermore, a higher-order version, named MBPC-Ω, is extended to further improve the performance, where the Ω is the maximum correction order. Numerical results show that the higher-order modified BPC achieves a similar BLER performance to existing multiple bit-flipping BP decoders but has around half the latency overhead. In addition, the proposed MBPC-2 decoder performs better than the cyclic redundancy check-aided SCL (CA-SCL) decoder with list size 4 and is slightly worse than the CA-SCL with list size 8 in high signal-to-noise ratio (SNR) regions but with significant decoding latency reduction.
Due to the design principle of parallel processing, belief propagation (BP) decoding is attractive, and it provides good error-correction performance compared with successive cancellation (SC) decoding. However, its error-correction performance is still inferior to that of successive cancellation list (SCL) decoding. Consequently, this paper proposes a novel flip-list- (FL)-enabled belief propagation (BP) method to improve the error-correction performance of BP decoding for polar codes with low computational complexity. The proposed technique identifies the vulnerable channel log-likelihood ratio (LLR) that deteriorates the BP decoding result. The FL is utilized to efficiently identify the erroneous channel LLRs and correct them for the next BP decoding attempt. The preprocessed channel LLR through FL improves the error-correction performance with minimal flipping attempts and reduces the computational complexity. The proposed technique was compared with the state-of-the-art BP, i.e., BP bit-flip (BP-BF), generalized BP-flip (GBPF), cyclic redundancy check (CRC)-aided (CA-SCL) decoding, and ordered statistic decoding (OSD), algorithms. Simulation results showed that the FL-BP had an excellent block error rate (BLER) performance gain up to 0.7 dB compared with BP, BP-BF, and GBPF decoder. Besides, the computational complexity was reduced considerably in the high signal-to-noise ratio (SNR) regime compared with the BP-BF and GBPF decoding methods.
The bit-flip method has been successfully applied to the successive cancellation (SC) decoder to improve the block error rate (BLER) performance for polar codes in the finite code length region. However, due to the sequential decoding, the SC decoder inherently suffers from longer decoding latency than that of the belief propagation (BP) decoder with efficient early stopping criterion. It is natural to ask how to perform bit-flip in a polar BP decoder. In this paper, bit-flip is introduced into the BP decoder for polar codes. The idea of critical set (CS), that is, originally proposed by Zhang et al. for identifying unreliable bits in a SC bit-flip decoder, is extended to the BP decoder here. After revealing the relationship between CS and the incorrect BP decoding results, critical set with order ω (CS-ω) is constructed to identify unreliable bit decisions in polar BP decoding. The simulation results demonstrate that compared with the conventional BP decoder, the BLER of the proposed bit-flip decoder can achieve significant signal-to-noise ratio (SNR) gain which is comparable to that of a cyclic redundancy check-aided SC list decoder with a moderate list size. In addition, the decoding latency of the proposed BP bit-flip decoder is only slightly higher than that of the conventional BP decoder in the medium and high SNR regions.
Polar codes have become the channel coding scheme for control channel of enhanced mobile broadband in the 5G communication systems. Belief propagation (BP) decoding of polar codes has advantages of low decoding latency and high parallelism but achieves worse bit error ratio (BER) performance compared with the successive cancellation list (SCL) decoding scheme. In this paper, an improved BP list (IBPL) decoding algorithm is proposed with comparable BER performance to SCL algoritm. Firstly, the optimal permuted factor graph is analyzed for polar codes, which improves the performance of the BP decoder without path extension. Furthermore, based on the optimal graph, the bit metric and decoding path metric are proposed to extend and prune the decoding path. The proposed IBPL decoder is focused on not only the permutation of polar codes but also the reliabilities of decoded codewords during each iteration of BP decoding, which has a more accurate decoding path list. The simulation results show that the proposed IBPL decoder improves the BER performance compared with the original BP decoder significantly, and can approach the performance of the SCL decoder at low signal to noise ratio regions.
Recently, belief propagation list (BPL) decoding has been proposed to achieve the excellent parallel decoding performance of polar codes with high throughput and low latency. However, the performance gap between BPL decoding and state-of-the-art successive cancellation list (SCL) decoding is still significant at practical SNRs. In this letter, we propose an efficient BPL flip (EBPLF) decoding algorithm for filling this gap. Firstly, an efficient bit-flipping strategy under BPL decoding is proposed to allow multiple bits being flipped more efficiently than the existing bit-flipping strategy. Then, by exploiting the decoding diversity and reliability of each bit over the multiple factor graphs within BPL decoding, an enhanced flip set is constructed to identify the error-prone patterns in an efficient way. Extensive simulation results show that EBPLF decoding outperforms the existing BPLF scheme and approaches the performance of adaptive SCL decoding at practical SNRs with much lower average latency.
Although iterative decoding of polar codes has recently made huge progress based on the idea of permuted factor graphs, it still suffers from a non-negligible performance degradation when compared to state-of-the-art CRC-aided successive cancellation list (CA-SCL) decoding. In this work, we show that iterative decoding of polar codes based on the belief propagation list (BPL) algorithm can approach the error-rate performance of CA-SCL decoding and, thus, can be efficiently used for decoding the standardized 5G polar codes. Rather than only utilizing the cyclic redundancy check (CRC) as a stopping condition (i.e., for error-detection), we also aim to benefit from the error-correction capabilities of the outer CRC code. For this, we develop two distinct soft-decision CRC decoding algorithms: a Bahl-Cocke-Jelinek-Raviv (BCJR)-based approach and a sum product algorithm (SPA)-based approach. Further, an optimized selection of permuted factor graphs is analyzed and shown to reduce the decoding complexity significantly. Finally, we benchmark the proposed CRC-aided belief propagation list (CA-BPL) decoding to state-of-the-art 5G polar codes under CA-SCL decoding and, thereby, showcase an error-rate performance not just close to the CA-SCL but also close to the maximum likelihood (ML) bound as estimated by ordered statistic decoding (OSD).