We present a classical post-processing method for quantum error mitigation that achieves 87.6-100% recovery of lost quantum information on real NISQ hardware with zero calibration overhead. The method exploits the mathematical equivalence between quantum decoherence and classical diffusion to apply Richardson-Lucy deconvolution to quantum measurement probability distributions. Tested on IBM Quantum Torino hardware across six circuit types, the method achieves 97.8% average fidelity recovery while requiring no ancilla qubits, no additional circuit executions, and no prior hardware characterization.
We present a classical post-processing method for quantum error mitigation that achieves 87.6-100% recovery of lost quantum information on real NISQ hardware with zero calibration overhead. The method exploits the mathematical equivalence between quantum decoherence and classical diffusion to apply Richardson-Lucy deconvolution to quantum measurement probability distributions. Tested on IBM Quantum Torino hardware across six circuit types, the method achieves 97.8% average fidelity recovery while requiring no ancilla qubits, no additional circuit executions, and no prior hardware characterization.
Abstract Quantum computing has recently emerged as a novel paradigm for solving problems otherwise intractable on classical computers, yet the practical progress of quantum computers is severely impacted by noise, decoherence, and imperfect gate operations in Noisy Intermediate-Scale Quantum (NISQ) devices. Specific to IBM Quantum hardware, imperfections due to readout error, gate errors, and device drift, which depends on time, resolves limits for the accuracy of outputs from our algorithms. The mitigation strategies currently used, for example, Measurement Error Mitigation (MEM), Zero Noise Extrapolation (ZNE), and Clifford Data Regression (CDR), offer improvement over raw, unmitigated outputs, but they are static and not dynamic; the reduction of noise in within an NISQ device is temporal and can vary in patterns that are non-zero. In addition to this, using the conventional methods provides inconsistent and suboptimal results.This study will provide enhanced reliability with respect to performing quantum computation on IBM Quantum hardware with a unique mitigation framework that is adaptive and computationally efficient for a high-fidelity output. The problem taken on here is the failure of existing error mitigation strategies to provide adaptive noise compensation, as they assume a statically-distributed error, despite the performance-related characteristics already being documented in regards to calibration drift and variation over time.To achieve this, we propose a Hybrid Adaptive Error Mitigation (HAEM) approach that includes baseline measurement error mitigation and an additional correction layer that utilizes realtime calibration information, along with lightweight machine learning models. The approach can be broken down into three steps: (i) perform standard measurement error mitigation to reduce classical readout noise, (ii) execute compact calibration circuits, such as Bell states, GHZ states and Clifford benchmarks to capture then current error profile of the device, and (iii) use a lightweight machine learning model (having been trained on historical and newest calibration data) to dynamically change the mitigation weights applied for the target quantum algorithm. All implementation is done using Qiskit Runtime to ensure low-latency execution, and we completed experiments on both Qiskit Aer noisy simulators and IBM Quantum devices.Initial results suggest HAEM improved the outputs of quantum algorithms' fidelity compared to the unmitigated runs and the baseline measurement error mitigation (MEM) runs. On the noisy simulators, HAEM increased fidelity from a raw performance of 0.65 to 0.87, nearly a 34% improvement. In fairer hardware-like scenarios, fidelity-on-average was persistently 12% better than MEM, with nearly equal time duration for the additional adaptive measurements. The adaptive aspect of HAEM consistently supported subsequent calibration cycles of the device and was effective to continue providing fidelity improvements despite the static mitigation performance degrading.To sum up, the proposed HAEM framework is a modern and viable alternative for error mitigation which brings together the benefits of baseline approaches with corrections that are driven by fixed-function error-corrective, adaptive learning. As both learning-based and standard baseline approaches can only achieve fixed levels of performance, HAEM, through its use of noise mitigation both at execution time and through correlating it with standard data, provides a route towards reliable quantum computations on current IBM hardware. HAEM also presents a contribution to the NISQ error-resilient landscape, and however it is intended that it will continue to improve future applications of hybrid workflows of quantum and classical computation where error mitigation and resilience is important.
Abstract Accurately characterizing and mitigating the impact of noise is essential for improving the fidelity of quantum simulations on Noisy Intermediate-Scale Quantum (NISQ) devices. In this work, we introduce a circuit-structure-preserving error-mitigation framework designed for parameterized quantum circuits. Unlike conventional approaches that alter circuit topology or require heavy post-processing, our method preserves the native architecture while systematically diagnosing gate noise. This structure-preserving feature enables robust, high-fidelity simulations even in the presence of significant hardware noise, making the approach particularly effective for small-scale circuits executed at high sampling rates, such as those used in variational algorithms and quantum neural networks. To benchmark its performance, we apply the method to variational quantum simulations of a non-Hermitian ferromagnetic transverse-field Ising chain implemented on IBM Quantum processors. The mitigated results exhibit excellent agreement with exact theoretical predictions across a wide range of noise conditions. Thus, our framework provides a scalable and hardware-efficient strategy for the current hardware.
The Quantum Approximate Optimization Algorithm (QAOA) is widely regarded as a promising near-term quantum algorithm for addressing hard combinatorial optimization problems on Noisy Intermediate-Scale Quantum (NISQ) devices; however, its real-world effectiveness is severely constrained by hardware noise, including gate infidelities, decoherence, and measurement errors. This work explores an error mitigation–driven approach to enhance the performance and robustness of QAOA without altering its algorithmic structure or requiring fault-tolerant quantum resources. Measurement error mitigation and zero-noise extrapolation are incorporated into the execution and post-processing stages of QAOA circuits and evaluated using the Minimum Vertex Cover problem as a representative benchmark. Performance is assessed through approximation ratios, solution stability, and noise sensitivity across multiple circuit depths. The results indicate that error mitigation not only improves approximation accuracy but also stabilizes output distributions and delays performance degradation at increased circuit depths. Additionally, the mitigated executions demonstrate better consistency across repeated runs, highlighting improved resilience to stochastic noise. These findings emphasize that lightweight and hardware-efficient error mitigation techniques can significantly extend the practical usability of QAOA on current NISQ hardware, providing a scalable and realistic pathway for executing quantum optimization algorithms more reliably in near-term quantum computing environments.
Current quantum computers present significant noise, especially as circuit depth and qubit count increase. Prior work has demonstrated that erroneous outcomes exhibit some behavior in Hamming space, enabling improvements in the output distributions of NISQ-era computers. We present HAMMR-L: a principled post-processing technique for improving the fidelity of output distributions by applying Richardson-Lucy image deconvolution on a state graph of measurement results connected by Hamming distance. We show that this preliminary implementation of HAMMR-L outperforms existing cutting-edge Hamming-based post-processors such as QBEEP while being circuit and hardware agnostic, which QBEEP is not. HAMMR-L also demonstrates clear potential for future improvements and we discuss how such improvements might be realized while highlighting the strengths, limitations, and generality of the underlying concept.
The Noisy Intermediate-Scale Quantum (NISQ) era is characterized by high error rates that fundamentally limit the utility of quantum algorithms. Existing error mitigation techniques—Zero-Noise Extrapolation (ZNE), Probabilistic Error Cancellation (PEC), and Clifford Data Regression (CDR)—achieve varying degrees of success but lack a unified signal-processing perspective. Motivated by the recently established isomorphism between Kraus operator representations and discrete impulse decompositions in digital signal processing (DSP), we present a novel quantum error mitigation framework that treats noisy quantum channels as linear time-invariant systems amenable to deconvolution. We adapt classical Wiener filtering theory to the quantum domain via the Liouville superoperator representation, formulating error mitigation as a linear minimum mean-square error (LMMSE) estimation problem in the space of density operators. Experimental validation across five representative NISQ scenarios demonstrates that the Quantum Wiener Filter (QWF) significantly outperforms ZNE, PEC, and CDR in four of five test cases, achieving 66–93% reduction in observable error for GHZ state preparation under amplitude damping, VQE energy estimation under thermal relaxation, random Clifford circuits under depolarizing noise, and QAOA optimization under crosstalk. The method exhibits statistically significant superiority (Wilcoxon signed-rank test, p < 10⁻⁴) across 30 independent trials per scenario. The fifth scenario—an adversarial state-dependent noise model—validates the Markovian assumption underlying the deconvolution framework by demonstrating controlled failure when channel linearity is violated. Our results establish that the DSP-QM isomorphism enables practical error mitigation with superior fidelity recovery (mean fidelity 0.96–0.99 vs. 0.78–0.98 for baselines) at modest computational overhead (1.2× shot budget). This work bridges quantum information theory and classical signal processing, opening a new avenue for NISQ algorithm optimization.Keywords: Quantum Error Mitigation, NISQ, Wiener Filter, Signal Processing, Qiskit.
We present a simple, malleable and low-overhead approach for improving generic biased quantum error mitigation (QEM) methods, achieving up to 15% fidelity improvements over standard QEM on 100-qubit circuits with up to 2000 entangling gates. We do so by constructing verifiable benchmark circuits which mirror the application circuit's native-gate structure and thus noise profile. These circuits can be used to benchmark and mitigate the bias of the underlying error mitigation method, requiring only the application circuit and hardware native gate set. We present two methods for generating benchmark circuits; one is agnostic to the target hardware at the expense of a small overhead of single-qubit gates, while the other is specific to the IBM superconducting hardware and has no gate overhead. As a corollary, we introduce benchmarked-noise zero-noise extrapolation (bnZNE) as a simple adaptation of zero-noise extrapolation (ZNE), one of the most popular error mitigation methods. We consider as an example the bias-mitigated ZNE and bnZNE of Trotterized Hamiltonian simulations, observing that our approaches outperform standard ZNE using both small-scale classical simulations and 100-qubit utility-scale experiments on the IBM superconducting hardware. We consider the measurement of both single-site observables as well as two-site correlations along a one-dimensional qubit chain. We also provide a software package for implementing the error mitigation techniques used in this research.