This paper presents the design, optimization, and simulation of arithmetic circuits using reversible logic for quantum computing applications. The motivation behind this work is to achieve resource-efficient computation through reduced quantum cost, minimized garbage outputs, and lower ancilla requirements. The methodology involves implementing Half Adders, Full Adders, Multiplexers, and Ripple Carry Adders (RCAs) using Toffoli and Peres gates. The proposed 8-bit RCA achieves a quantum cost of 58 using 24 qubits, 8 garbage outputs, and 6 ancilla inputs—showing a significant improvement over conventional Toffoli-based designs that require higher quantum cost and resources. Simulations were conducted on IBM Qiskit and Google Colab using the Qiskit SDK to validate circuit correctness and scalability. The obtained results demonstrate superior resource efficiency and confirm the feasibility of reversible-logic-based quantum arithmetic as a foundation for scalable quantum arithmetic logic units (ALUs) and processors.
This paper presents the design, optimization, and simulation of arithmetic circuits using reversible logic for quantum computing applications. The motivation behind this work is to achieve resource-efficient computation through reduced quantum cost, minimized garbage outputs, and lower ancilla requirements. The methodology involves implementing Half Adders, Full Adders, Multiplexers, and Ripple Carry Adders (RCAs) using Toffoli and Peres gates. The proposed 8-bit RCA achieves a quantum cost of 58 using 24 qubits, 8 garbage outputs, and 6 ancilla inputs—showing a significant improvement over conventional Toffoli-based designs that require higher quantum cost and resources. Simulations were conducted on IBM Qiskit and Google Colab using the Qiskit SDK to validate circuit correctness and scalability. The obtained results demonstrate superior resource efficiency and confirm the feasibility of reversible-logic-based quantum arithmetic as a foundation for scalable quantum arithmetic logic units (ALUs) and processors.
A reconfigurable 16-bit adder utilizing reversible logic is introduced to enhance both energy efficiency and computational performance. The design integrates Toffoli, Peres, and Haghparast–Navi Gate (HNG) to construct optimized full adder units with lower quantum cost, reduced garbage outputs, and minimal constant inputs. A reversible multiplexer is employed to enable seamless switching between Ripple Carry Adder (RCA) and Carry Lookahead Adder (CLA) configurations. While RCA mode supports power-efficient operation, CLA mode enables faster computation, allowing the circuit to adapt to different processing requirements. Performance evaluation is carried out considering propagation delay, power consumption and hardware utilization. The analysis indicates enhanced efficiency over existing reversible adder designs. Due to its adaptable structure and scalable nature, the architecture is appropriate for reversible computing, quantum systems, and low-power VLSI applications.
In modern Very-Large-Scale Integration (VLSI) technology, managing information loss is a critical challenge. Conventional logic gates, such as AND, OR, and NOT, are prone to data loss during operations, reducing their efficiency for sophisticated applications. Reversible logic gates, which have an equal number of inputs and outputs, offer a solution by preserving data integrity. This paper presents the design and FPGA implementation of an efficient and high-speed full adder circuit utilizing reversible logic gates, namely Feynman, Toffoli, and Peres gates. The design focuses on improving computational efficiency and thermal performance. An analysis of the circuit's quantum cost, garbage outputs, and ancillary inputs reveals its advantages over traditional designs. Proposed design has been realized using Verilog and Synthesize and simulations performed using Xilinx Vivado and Xilinx ISE tools, confirms the functionality and efficiency of the proposed full adder. FPGA implementation of the design has been done using NEXYS A7 (Artix 7 series). The results show that the circuit has a quantum cost of 10, with two garbage outputs and one ancillary input, underscoring its potential for use in low-power, high-performance computing systems and quantum computing applications.
Programmable reversible logic is emerging as a prospective logic design style for implementation in modern nanotechnology and quantum computing with minimal impact on circuit heat generation. Recent advances in reversible logic using and quantum computer algorithms allow for improved computer architecture and arithmetic logic unit designs. In this paper, a 2*2 Swap gate which is a reduced implementation in terms of quantum cost and delay to the previous Swap gate is presented. Next, a novel 3*3 programmable UPG gate capable of calculating the fundamental logic calculations is presented and verified, and its advantages over the Toffoli and Peres gates are discussed. The UPG is then implemented in a reduced design for calculating n-bit AND, nbit OR and n-bit ZERO calculations. Then, two 3*3 RMUX gates capable of multiplexing two input values with reduced quantum cost and delay compared to the previously existing Fredkin gate is presented and verified. Next, 4*4 reversible gate is presented and verified which is capable of producing the calculations necessary for two-bit comparisons. The UPG and RC are implemented in the design of novel sequential and tree-based comparators. Then, two novel 4*4 reversible logic gates (MRG and PAOG) are proposed with minimal delay, and may be configured to produce a variety of logical calculations on fixed output lines based on programmable select input lines. A 5*5 structure (MG) is proposed that extends the capabilities of both the MRG and PAOG. The comparator designs are verified and its advantages to previous designs are discussed. Then, reversible implementations of ripple-carry, carry-select and Kogge-Stone carry look-ahead adders are analyzed and compared. Next, implementations of the Kogge-Stone adder with sparsity-4, 8 and 16 were designed, verified and compared. The enhanced sparsity-4 Kogge-Stone adder with ripple-carry adders was selected as the best design, and its implemented in the design of a 32-bit arithmetic logic unit is demonstrated. The proposed ALU design is verified and its advantages over the only existing ALU design are quantitatively analyzed.
Reversible logic provides a foundation for nextgeneration computing systems, particularly in quantum and emerging nanotechnology-based architectures. Unlike conventional logic, reversible gates preserve information and support backward computation, making them crucial for designing quantum circuits. This paper introduces a reversible Arithmetic and Logic Unit (ALU) that performs eight fundamental operations-AND, OR, NOT, XOR, addition, subtraction, increment, and decrement-using Fredkin, Peres, TR, and modified Fredkin gates. A dedicated control unit manages operation selection, ensuring functional flexibility and circuit efficiency. The proposed design achieves significant improvements by minimizing ancilla inputs, quantum cost and garbage outputs, resulting in a total quantum cost of 71 and contains 16 reversible gates and 14 garbage outputs. The architecture was modeled and verified using Xilinx Vivado HLS and ISE 14.7, and implemented on the Nexys A7 (Artix-7) FPGA platform. Comparative analysis demonstrates better efficiency than existing reversible ALU designs, establishing the proposed circuit as a strong candidate for quantum computing and other advanced computing paradigms.
Quantum computers provide considerable potential to enhance computing technology, anticipated to surpass conventional computers by resolving intricate challenges that existing systems cannot tackle. They use quantum algorithms for improved performance and depend on reversible computations based on quantum physics and linear algebra. In contrast to traditional computing, which may include irreversible processes, quantum computing relies on unitary operations that are fundamentally reversible. The parity-preserving feature enables the identification of both permanent and transient defects within circuits. The parity-preserving feature ensures that the input and output states are equal in reversible circuits. Vedic multipliers offer a crucial foundation in the design and implementation of digital circuits, recognized for their speed, efficiency, ease of calculations, reduction of errors, and broad applicability. Prior investigations of quantum Vedic multipliers have faced obstacles like elevated Quantum Cost (QC), substantial Garbage Output (GO), Constant Input (CI), augmented Gate Count (GC), and CNOT-V/V+ count, resulting in more resource use and implementation intricacy. These inefficiencies hinder the scalability and feasibility of quantum multipliers in high-performance computing applications. A proposed solution to these issues is to introduce a cost-effective, parity-preserving reversible quantum block synthesized through an established method that produces a network list of multi-controlled Toffoli (MCT) gates. This Toffoli-based network is then optimized using various techniques, ultimately transforming it into a network of fundamental quantum gates. This approach decreases quantum expenses, eliminates unnecessary outputs, and enhances quantum gate efficiency. Integrating this innovative technique into the reversible quantum Vedic multipliers offers a more efficient, cost-effective, and scalable solution than current approaches. All proposed designs, such as a half adder-subtractor, a ripple carry adder (RCA), and two-bit and four-bit Vedic multipliers, are suggested based on functional blocks and pre-existing components. The suggested structures undergo evaluation in comparison to existing state-of-the-art procedures, demonstrating their cost-effectiveness. The observed average savings for two-bit and four-bit Vedic multipliers, with respect to QC, number of CNOT-V/V+ count, GO, CI, and GC, are 20.01%, 19.38%, 37.51%, 37.51%, and 54.89%, and 22.71%, 18.78%, 27.23%, 31.10%, and 42.38%, respectively when compared to previous studies. Furthermore, all suggested circuits are evaluated and confirmed using the IBM quantum laboratory.
The power consumption in classical computers has grown to be a critical issue. Thus, quantum computers have become a promising alternative to classical computers for more processing power and lower energy consumption. Reversible gates are important for building the quantum computers. Reversible circuits have various applications, such as digital signal processing, optical computing, quantum computing, etc. The design and synthesis of reversible gates and circuits have grown in popularity and attracted the attention of many researchers. The adder and subtractor are important computation blocks for the structure of the Arithmetic Logic Unit (ALU). In this paper, a design of reversible binary half and full adders and subtractors using reversible logic gates is proposed. The TR (Thapliyal Ranganathan) and Peres gates are used to construct the reversible half adder and subtractor circuit. Meanwhile, the Double Peres Gate (DPG), Fredkin, and NOT gates are used to build the reversible 1-bit full adder and subtractor circuit. The designs are optimized in terms of number of gates, constant inputs, garbage outputs, and quantum cost. The truth table representation and the Binary Decision Diagram (BDD) synthesis method are used to represent and synthesize the circuits, respectively. The circuits are synthesized and simulated using the Verilog Hardware Description Language code and Xilinx ISE 14.7. The results show that the proposed designs achieve the lowest quantum cost in both half adder/subtractor and full adder/subtractor. As the half adder/subtractor has six quantum cost and the full adder/subtractor has nine quantum cost.