Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Asia Communications and Photonics Conference

Design of a multi-spectral superconducting nanowire single photon detector with high efficiency and high speed

Dezhi Li, Ziqi Gao, Yan Zhang, Kai Yang, Shen He, Xiaohu Liu

Published Nov 5, 2025• 0 citations
Publisher

Abstract

This Superconducting nanowire single-photon detectors (SNSPDs) are efficient devices that absorb and convert incident photons to discriminable signals. However, the multi-spectral response of it is limited due to the resonance of the traditional optical cavity. In this work, we present a multi-spectral SNSPD that can detect single photon at multiple wavelengths with high efficiency simultaneously. The stack structure consists of nanowires embedded in the high refractive index dielectric strips, spacer layers and the reflection layer. The designed detector shows absorption efficiencies of over 85% at the three target wavelengths of 1550 nm, 1310 nm and 1064 nm while the filling factor of nanowire is only 20%. Meanwhile, the reset time is dramatically reduced by applying the low-filling-factor nanowire. Such ultrafast, high-performance single-photon detectors are promising for the rapidly advancing fields of multi-spectral imaging, satellite laser ranging and quantum communications.

DOI
10.1109/acp66871.2025.11350931

Related papers

Supercontinuum single-photon detector using multilayer superconducting nanowires

Hao Li, Yong Wang, Lixing You +9 more

High-efficiency superconducting nanowire single-photon detectors (SNSPDs), which have numerous applications in quantum information systems, function by using the optical cavity and the ultrasensitive photon response of their ultra-thin superconducting nanowires. However, the wideband response of superconducting nanowires is limited due to the resonance of the traditional optical cavity. Here, we report on a supercontinuum SNSPD that can efficiently detect single photons over an ultra-broad spectral range from visible to mid-infrared light. Our detection approach relies on using multiple cavities with well-separated absorbed resonances formed by fabricating multilayer superconducting nanowires on metallic mirrors with silica acting as spacer layers. Thus, we are able to extend the absorption spectral bandwidth while maintaining considerable efficiency, as opposed to a conventional single-layer SNSPD. Our calculations show that the proposed supercontinuum SNSPD exhibits an extended absorption bandwidth with increased nanowire layers. Its absorption efficiency is greater than 70% over the entire range from 400 to 2500 nm (or 400 to 3000 nm), when using two-layer (or three-layer) nanowires. As a proof of principle, the SNSPD with bilayer nanowires is fabricated based on the proposed detector architecture with simplified geometrical parameters. The detector achieves broadband detection efficiency over 60% from 950 to 1650 nm. This type of detector may replace multiple narrow band detectors in a system and find uses in the emerging and rapidly advancing field of atomic and molecular broadband spectroscopy.

Photonics Research•Nov 20, 2019•22 citations

Multispectral superconducting nanowire single photon detector

Hao Li, Heqing Wang, Lixing You +8 more

In this work, we report multispectral superconducting nanowire single photon detectors (SNSPDs) that can simultaneously detect single photons at multiple wavelengths with high efficiency. The superconducting nanowires are fabricated on an all-dielectric mirror consisting of two quarter-wave stack reflectors with separated central wavelengths. The unique optical structure results in serially coupled optical cavities, leading to multiple resonant absorption bands that are utilized for high-efficiency single photon detection. The fabricated detector shows system detection efficiencies of >80% at the three target wavelengths of 1550 nm, 1310 nm, and 1064 nm. The multispectral detector may eliminate the need for multiple SNSPDs for different wavelengths in a system, potentially resulting in a reduction in size, weight, and power, as well as in the cost of the overall detection system. The detector may also find interesting use for applications such as multispectral ranging or imaging.

Optics Express•Feb 8, 2019•19 citations

Multispectral and low-filling-factor superconducting nanowire single photon detector with high absorption efficiency

Dezhi Li, Xiangyuan Liu, Rongzhen Jiao

We propose a superconducting nanowire single photon detector (SNSPD) that can work efficiently at two target wavelengths and has a significant improvement in the counting rate due to the low-filling-factor nanowires in the silicon slots and the silver reflector. Numerical simulations show that the absorption efficiency can be over 90% at a single wavelength, whether the incident light wavelength is 1550 nm or 1064 nm, and over 80% when the SNSPD is designed to work at both wavelengths. In addition, the reset time is about 24% of the conventional SNSPDs. Our work presents a design for fabricating faster, larger-area, and multispectral SNSPDs with a high efficiency, which can be applied in applications such as quantum optics communication and multiwavelength sensing.

AIP Advances•Aug 1, 2020•4 citations

Superconducting nanowire single photon detector design with multispectral and polarization-sensitive performance

Xinyi Liu, Chaojie Wang, Xiyu Chen +1 more

Abstract The multispectral and polarization-sensitive detection of superconducting nanowire single photon detectors (SNSPDs) have been identified in applications, such as quantum information processing and polarimetric imaging systems. Distributed Bragg reflectors (DBRs) demonstrate exceptional wavelength-selective reflectivity, and subwavelength gratings (SWGs) exhibit the ability to separate different polarized light. In this paper, a multispectral and polarization-sensitive SNSPD design is proposed by combining DBRs and SWGs. In the design, the NbN nanowires are positioned on two DBR stacks with respective central wavelengths of 1400 nm and 930 nm, followed by integration of Si-Al composite gratings onto the surface layer. Numerical simulation results show that, setting the fill factor at 0.5, the polarization sensitivity of the SNSPD is ∼0.98, with absorption efficiencies of ∼95%, ∼92%, and ∼94% at wavelengths of 1064 nm, 1310 nm, and 1550 nm, respectively. The design proposed in this work could facilitate the development of high-performance SNSPDs, potentially advancing their applications in multispectral polarization imaging and quantum communication systems.

Physica Scripta•Nov 1, 2025•0 citations

Broadband waveguide-integrated superconducting single-photon detectors with high system detection efficiency

Martin A. Wolff, Fabian Beutel, Jonas Schütte +4 more

Fast and efficient detection of single photons with high timing accuracy is a crucial requirement in most quantum optics experiments and enables novel sensing and imaging solutions. Superconducting nanowire single-photon detectors (SNSPD) achieve technology-leading performance in terms of detection efficiency, dark count rate, timing jitter, and detector dead times. However, conventional SNSPDs with high system detection efficiency typically rely on resonant enhancement of the absorption efficiency, thus only achieving attractive detector benchmarks over narrow spectral windows. Waveguide-integrated SNSPDs allow for leveraging the wideband material absorption in superconducting nanowires by absorbing light in a traveling-wave geometry but have been limited to low system detection efficiencies due to interface losses when coupling to optical fibers. Here, we show how high system detection efficiencies of 22%–73% are realized over a broad wavelength range from 532 nm to 1640 nm in a single waveguide-integrated SNSPD device. We accomplish efficient coupling between optical fibers and waveguide-integrated nanowire detectors by employing a 3D interface, produced in direct laser writing, that relies on total internal reflection for achieving a broad transmission bandwidth. We further find low timing jitter of 25.7 ps and detector decay times of 9.8 ns, allowing for single-photon counting with high repetition rates up to 100 MHz. Our work paves the way for an efficient single-photon detector solution that combines the spectral requirements of an extremely wide range of quantum optics experiments in a single device. The coupling approach and SNSPD-integration with nanophotonic circuits are further well-suited for realizing large-scale detector arrays.

Applied Physics Letters•Apr 12, 2021•43 citations

High detection efficiency and rate superconducting nanowire single-photon detector with a composite optical structure

Min Gu, Lin Kang, Labao Zhang +5 more

Superconducting nanowire single-photon detectors (SNSPDs) with a composite optical structure composed of phase-grating and optical cavity structures are designed to enhance system detection efficiency and count rates. Numerical simulation by finite-difference time-domain method shows that the photon absorption capacity of SNSPDs with a composite optical structure can be enhanced significantly by adjusting the parameters of the phase-grating and optical cavity structures. The absorption capacity of the superconducting nanowires reached 69.8% at the wavelength of 850 nm with 0.3 filling factor. When the filling factor was reduced to only 0.08, the absorption capacity is still 48.52%. It greatly decreased the kinetic inductance of SNSPDs, and improved the count rates.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Mar 16, 2015•3 citations
This Superconducting nanowire single-photon detectors (SNSPDs) are efficient devices that absorb and convert incident photons to discriminable signals. However, the multi-spectral response of it is limited due to the resonance of the traditional optical cavity. In this work, we present a multi-spectral SNSPD that can detect single photon at multiple wavelengths with high efficiency simultaneously. The stack structure consists of nanowires embedded in the high refractive index dielectric strips, spacer layers and the reflection layer. The designed detector shows absorption efficiencies of over 85% at the three target wavelengths of 1550 nm, 1310 nm and 1064 nm while the filling factor of nanowire is only 20%. Meanwhile, the reset time is dramatically reduced by applying the low-filling-factor nanowire. Such ultrafast, high-performance single-photon detectors are promising for the rapidly advancing fields of multi-spectral imaging, satellite laser ranging and quantum communications.
High-efficiency superconducting nanowire single-photon detectors (SNSPDs), which have numerous applications in quantum information systems, function by using the optical cavity and the ultrasensitive photon response of their ultra-thin superconducting nanowires. However, the wideband response of superconducting nanowires is limited due to the resonance of the traditional optical cavity. Here, we report on a supercontinuum SNSPD that can efficiently detect single photons over an ultra-broad spectral range from visible to mid-infrared light. Our detection approach relies on using multiple cavities with well-separated absorbed resonances formed by fabricating multilayer superconducting nanowires on metallic mirrors with silica acting as spacer layers. Thus, we are able to extend the absorption spectral bandwidth while maintaining considerable efficiency, as opposed to a conventional single-layer SNSPD. Our calculations show that the proposed supercontinuum SNSPD exhibits an extended absorption bandwidth with increased nanowire layers. Its absorption efficiency is greater than 70% over the entire range from 400 to 2500 nm (or 400 to 3000 nm), when using two-layer (or three-layer) nanowires. As a proof of principle, the SNSPD with bilayer nanowires is fabricated based on the proposed detector architecture with simplified geometrical parameters. The detector achieves broadband detection efficiency over 60% from 950 to 1650 nm. This type of detector may replace multiple narrow band detectors in a system and find uses in the emerging and rapidly advancing field of atomic and molecular broadband spectroscopy.
In this work, we report multispectral superconducting nanowire single photon detectors (SNSPDs) that can simultaneously detect single photons at multiple wavelengths with high efficiency. The superconducting nanowires are fabricated on an all-dielectric mirror consisting of two quarter-wave stack reflectors with separated central wavelengths. The unique optical structure results in serially coupled optical cavities, leading to multiple resonant absorption bands that are utilized for high-efficiency single photon detection. The fabricated detector shows system detection efficiencies of >80% at the three target wavelengths of 1550 nm, 1310 nm, and 1064 nm. The multispectral detector may eliminate the need for multiple SNSPDs for different wavelengths in a system, potentially resulting in a reduction in size, weight, and power, as well as in the cost of the overall detection system. The detector may also find interesting use for applications such as multispectral ranging or imaging.
We propose a superconducting nanowire single photon detector (SNSPD) that can work efficiently at two target wavelengths and has a significant improvement in the counting rate due to the low-filling-factor nanowires in the silicon slots and the silver reflector. Numerical simulations show that the absorption efficiency can be over 90% at a single wavelength, whether the incident light wavelength is 1550 nm or 1064 nm, and over 80% when the SNSPD is designed to work at both wavelengths. In addition, the reset time is about 24% of the conventional SNSPDs. Our work presents a design for fabricating faster, larger-area, and multispectral SNSPDs with a high efficiency, which can be applied in applications such as quantum optics communication and multiwavelength sensing.
Abstract The multispectral and polarization-sensitive detection of superconducting nanowire single photon detectors (SNSPDs) have been identified in applications, such as quantum information processing and polarimetric imaging systems. Distributed Bragg reflectors (DBRs) demonstrate exceptional wavelength-selective reflectivity, and subwavelength gratings (SWGs) exhibit the ability to separate different polarized light. In this paper, a multispectral and polarization-sensitive SNSPD design is proposed by combining DBRs and SWGs. In the design, the NbN nanowires are positioned on two DBR stacks with respective central wavelengths of 1400 nm and 930 nm, followed by integration of Si-Al composite gratings onto the surface layer. Numerical simulation results show that, setting the fill factor at 0.5, the polarization sensitivity of the SNSPD is ∼0.98, with absorption efficiencies of ∼95%, ∼92%, and ∼94% at wavelengths of 1064 nm, 1310 nm, and 1550 nm, respectively. The design proposed in this work could facilitate the development of high-performance SNSPDs, potentially advancing their applications in multispectral polarization imaging and quantum communication systems.
Fast and efficient detection of single photons with high timing accuracy is a crucial requirement in most quantum optics experiments and enables novel sensing and imaging solutions. Superconducting nanowire single-photon detectors (SNSPD) achieve technology-leading performance in terms of detection efficiency, dark count rate, timing jitter, and detector dead times. However, conventional SNSPDs with high system detection efficiency typically rely on resonant enhancement of the absorption efficiency, thus only achieving attractive detector benchmarks over narrow spectral windows. Waveguide-integrated SNSPDs allow for leveraging the wideband material absorption in superconducting nanowires by absorbing light in a traveling-wave geometry but have been limited to low system detection efficiencies due to interface losses when coupling to optical fibers. Here, we show how high system detection efficiencies of 22%–73% are realized over a broad wavelength range from 532 nm to 1640 nm in a single waveguide-integrated SNSPD device. We accomplish efficient coupling between optical fibers and waveguide-integrated nanowire detectors by employing a 3D interface, produced in direct laser writing, that relies on total internal reflection for achieving a broad transmission bandwidth. We further find low timing jitter of 25.7 ps and detector decay times of 9.8 ns, allowing for single-photon counting with high repetition rates up to 100 MHz. Our work paves the way for an efficient single-photon detector solution that combines the spectral requirements of an extremely wide range of quantum optics experiments in a single device. The coupling approach and SNSPD-integration with nanophotonic circuits are further well-suited for realizing large-scale detector arrays.
Superconducting nanowire single-photon detectors (SNSPDs) with a composite optical structure composed of phase-grating and optical cavity structures are designed to enhance system detection efficiency and count rates. Numerical simulation by finite-difference time-domain method shows that the photon absorption capacity of SNSPDs with a composite optical structure can be enhanced significantly by adjusting the parameters of the phase-grating and optical cavity structures. The absorption capacity of the superconducting nanowires reached 69.8% at the wavelength of 850 nm with 0.3 filling factor. When the filling factor was reduced to only 0.08, the absorption capacity is still 48.52%. It greatly decreased the kinetic inductance of SNSPDs, and improved the count rates.