Payload Testing of a Weak Coherent Pulse Quantum Key Distribution Module for the Responsive Operations on Key Services (ROKS) Mission Presenter Information
Cassandra Mercury, Sonali Mohapatra, Craig D. Colquhoun, Steve Greenland, Mikulas Cebecauer, Philippos Karagiannakis, Ahren McTaggart, David Lowndes, Milan Stefko, John Rarity
Quantum Key Distribution (QKD) missions currently in development for space are expanding in number due to the increasing need for more secure means of encryption combined with the range limitations of terrestrial QKD. Most of these new missions are using smaller satellites to test their payloads. The ROKS (Responsive Operations for Key Services) mission is one such mission. It will utilize a 6U CubeSat bus and is set to launch in Q4 2022. A breadboard model of a 785nm weak coherent pulse quantum source module designed for ROKS, named JADE, was tested within a lab testbench environment with the mission’s systems represented by breadboard models with equivalent components. JADE’s optical module was miniaturized to be compatible with the limited payload volumes of these small classes of satellites. Lab-based testbench characterization of JADE’s ability to emit quantum pulses with four polarization states that propagate through the beam steering system for analysis by a receiver box was demonstrated. Future work will focus on further shrinking the JADE module down to less than 1/3U size, increasing the interoperability of the module with standard interfaces for both CubeSats and SmallSats, and adding further capabilities and full environmental testing qualification to JADE.
Quantum Key Distribution (QKD) missions currently in development for space are expanding in number due to the increasing need for more secure means of encryption combined with the range limitations of terrestrial QKD. Most of these new missions are using smaller satellites to test their payloads. The ROKS (Responsive Operations for Key Services) mission is one such mission. It will utilize a 6U CubeSat bus and is set to launch in Q4 2022. A breadboard model of a 785nm weak coherent pulse quantum source module designed for ROKS, named JADE, was tested within a lab testbench environment with the mission’s systems represented by breadboard models with equivalent components. JADE’s optical module was miniaturized to be compatible with the limited payload volumes of these small classes of satellites. Lab-based testbench characterization of JADE’s ability to emit quantum pulses with four polarization states that propagate through the beam steering system for analysis by a receiver box was demonstrated. Future work will focus on further shrinking the JADE module down to less than 1/3U size, increasing the interoperability of the module with standard interfaces for both CubeSats and SmallSats, and adding further capabilities and full environmental testing qualification to JADE.
Quantum Key Distribution (QKD) missions currently in development for space are expanding in number due to the increasing need for more secure means of encryption combined with the range limitations of terrestrial QKD. Most of these new missions are using smaller satellites to test their payloads. The ROKS (Responsive Operations for Key Services) mission is one such mission. It will utilize a 6U CubeSat bus and is set to launch in Q4 2022. A breadboard model of a 785nm weak coherent pulse quantum source module designed for ROKS, named JADE, was tested within a lab testbench environment with the mission’s systems represented by breadboard models with equivalent components. JADE’s optical module was miniaturized to be compatible with the limited payload volumes of these small classes of satellites. Lab-based testbench characterization of JADE’s ability to emit quantum pulses with four polarization states that propagate through the beam steering system for analysis by a receiver box was demonstrated. Future work will focus on further shrinking the JADE module down to less than 1/3U size, increasing the interoperability of the module with standard interfaces for both CubeSats and SmallSats, and adding further capabilities and full environmental testing qualification to JADE.
Quantum key distribution (QKD) is a theoretically proven future-proof secure encryption method that inherits its security from fundamental physical principles. With a proof-of-concept QKD payload having flown on the Micius satellite since 2016, efforts have intensified globally. Craft Prospect, working with a number of UK organisations, has been focused on miniaturising the technologies that enable QKD so that they may be used in smaller platforms including nanosatellites. The significant reduction of size, and therefore the cost of launching quantum communication technologies either on a dedicated platform or hosted as part of a larger optical communications will improve potential access to quantum encryption on a relatively quick timescale. The Responsive Operations for Key Services (ROKS) mission seeks to be among the first to send a QKD payload on a CubeSat into low Earth orbit, demonstrating the capabilities of newly developed modular quantum technologies. The ROKS payload comprises a quantum source module that supplies photons randomly in any of four linear polarisation states fed from a quantum random number generator; an acquisition, pointing, and tracking system to fine-tune alignment of the quantum source beam with an optical ground station; an imager that will detect cloud cover autonomously; and an onboard computer that controls and monitors the other modules, which manages the payload and assures the overall performance and security of the system. Each of these modules have been developed with low Size, Weight and Power (SWaP) for CubeSats, but with interoperability in mind for other satellite form factors. We present each of the listed components, together with the initial test results from our test bench and the performance of our protoflight models prior to initial integration with the 6U CubeSat platform systems. The completed ROKS payload will be ready for flight at the end of 2022, with various modular components already being baselined for flight and integrated into third party communication missions.
The QUBE-I mission is a technology demonstrator mission for novel building-blocks for satellite-based quantum-key-distribution (QKD). The mission aims to test three highly integrated optical payloads, a quantum random number generator and two transmitters for polarization and phase encoded quantum states as a precursor mission for the first QKD demonstration from a CubeSat. The QKD sources are connected to, and are integrated together with the Optical Space Infrared Downlink System (OSIRIS) for QUBE (O4Q) in a 3U CubeSat. One of the mission's primary challenges is achieving a precise and accurate pointing of the O4Q with an error margin of less than 1° towards the optical ground station (OGS). Additionally, conducting the experiments presents several operational challenges, such as the need for precise orbital elements to track the satellite with the OGS and safety mechanisms to protect the Sunsensitive components of the satellite. Following the launch on 16th August 2024, we conducted an extensive commissioning phase to test all subsystems, payload components, and operational procedures. This paper provides insights and results from QUBE-I's first year in orbit, highlighting lessons learned from integrating multiple complex payload systems into a 3U CubeSat platform. Starting with communication establishment, we present the ground segment and operations capabilities. We elaborate on the use of flexible on-board scripting and recording mechanisms provided by the satellite's flight software stack for operations. An effective review, test, and deployment procedure was established to balance risk mitigation and agile operation planning. We present results of extensive tests conducted for the crucial attitude determination and control system (ADCS), including actuator verification, spin-up and detumbling tests, in-orbit sensor calibration procedures, and the evaluation of various pointing modes, such as the fine pointing mode required for the experiments. Besides that, we give insights in the actual performance of the experimental and scientific payloads after their commissioning. A big milestone marked the successful test of the operational procedure for the QKD experiments. This includes the timely provision of precise orbit determination to the OGS for tracking. In addition, the ADCS needs to prepare the fine pointing mode accordingly and the experiment needs to be started autonomously before actual contact. Flexibly selectable on-board recordings can be downloaded after the experiments for evaluation. As expected, the technical complexity of the QUBE-I mission resulted in a challenging first year of operation. With this paper, we aim to share our experiences and contribute our insights to the space community.
In a world of global satellite communication networks, it is crucial to ensure the security of these data links. QUBE is a project that will develop and launch a CubeSat for the downlink of strongly attenuated light pulses, with encoded quantum information, which can be used for the exchange of encryption keys. This 3U Pico-Satellite will be built using the UNISEC-Europe standard, which has been proven to provide a robust framework for increased reliability for CubeSat missions. In addition to advanced reaction wheels for precision pointing, the satellite will be carrying the DLR-OSIRIS optical downlink system as well as dedicated payloads for testing components required for quantum key distribution. A miniaturized quantum random number generator (QRNG) will create a sequence of numbers, which can be used to set the quantum states of the light. The light pulses will then be downlinked to the optical ground station at DLR in Oberpfaffenhofen, Germany, which is equipped with the corresponding components for receiving the quantum states. Additionally, the random numbers will partially be made available via an RF downlink. This will allow evaluating the link loss as well as the noise and errors in the transmission of quantum signals. In QKD, due to the underlying quantum mechanics, any attempt of reading the quantum states will alter them, which makes interceptions easily detectable. The quantum communication experiments will evaluate whether secure communication links are possible even on a CubeSat scale. A major challenge for building the required CubeSat is the attitude determination and control system that will provide precise pointing. This work will outline detailed mission requirements as well as the chosen subsystems for tackling these challenges in order to deliver a successful mission.
Quantum Key Distribution (QKD) enables two parties to securely exchange encryption keys, leveraging principles of quantum mechanics—specifically, the no-cloning theorem and measurement disturbance—to detect any third-party eavesdropping. Once the key is established, the parties can encrypt and decrypt secret messages, which are transmitted over classical channels.Over the last ten years, INO, the largest center of expertise in optics and photonics in Canada, has contributed to the development of space-based systems for QKD demonstrations between space and ground. INO possesses extensive experience in the design, manufacturing, assembly, and testing of advanced opto-mechanical devices, allowing it to meet the demanding requirements of space-based QKD via lightweight, compact, and robust units.On the receiver side, INO developed a polarization analyzer for the Quantum Encryption and Science Satellite (QEYSSat) mission for Honeywell Canada, on behalf of the Canadian Space Agency (CSA). This mission investigates QKD performance using both weak coherent pulse sources and entangled photon sources in an uplink configuration. The Integrated Optical Assembly (IOA), developed as part of this mission, receives a free-space quantum beam within a defined field of view and projects the signal into multimode fibers, corresponding to binary states for each polarization basis. Measurement basis selection (vertical/horizontal or diagonal/antidiagonal) is passively achieved via a Non-Polarized Beam Splitter (NPBS), while a Polarization Beam Splitters (PBS) perform polarization projection. Precision bonding joins polarization components into a monolithic prism assembly, forming the core of the IOA, and focalization lenses guide each channel’s beam into a multimode fiber. The IOA flight unit has passed acceptance testing and is integrated into the main payload.On the transmitter side, INO is developing a polarized beam combiner for the European Space Agency’s Quantum Key Distribution Satellite (QKDSat) project, in partnership with Honeywell UK. This project aims to provide secure cryptographic key delivery services to customers on the ground for a range of applications. The Interface Box (IFBox) combines four linearly polarized quantum beams from single-mode fibers into one co-aligned free-space beam, maintaining high polarization cleanliness. Again, polarization components are incorporated into a monolithic prism assembly, but, in contrast with the IOA, the IFBox faces more stringent requirements for beam pointing and positioning across a wider operational temperature range. The IFBox is far more complex than just the IOA in reverse mode.This paper presents the development and testing of the IOA and IFBox devices, discussing key design concepts and summarizing performance results.
Satellite based Quantum Key Distribution (QKD) in Low Earth Orbit (LEO) is currently the only viable technology to span thousands of kilometres. Since the typical overhead pass of a satellite lasts for a few minutes, it is crucial to increase the the signal rate to maximise the secret key length. For the QUARC CubeSat mission due to be launched within two years, we are designing a dual wavelength, weak-coherent-pulse decoy-state Bennett- Brassard ’84 (WCP DS BB84) QKD source. The optical payload is designed in a 12×9×5cm3 bespoke aluminium casing. The Discrete Variable QKD Source consists of two symmetric sources operating at 785 nm and 808 nm. The laser diodes are fixed to produce Horizontal,Vertical, Diagonal, and Anti-diagonal (H,V,D,A) polarisation respectively, which are combined and attenuated to a mean photon number of 0.3 and 0.5 photons/pulse. We ensure that the source is secure against most side channel attacks by spatially mode filtering the output beam and characterising their spectral and temporal characterstics. The extinction ratio of the source contributes to the intrinsic Qubit Error Rate(QBER) with 0.817±0.001%. This source operates at 200MHz, which is enough to provide secure key rates of a few kilo bits per second despite 40 dB of estimated loss in the free space channel.1