This thesis reports on the two projects I have completed during my Bachelor's research at the Bose Einstein Condensate (BEC) research group of Peter van der Straten: optimizing evaporative cooling and measuring interactions between spinor condensates. \n \nTo create a BEC, the process of evaporative cooling is used. This process is modeled and optimized using a Monte-Carlo optimization, which shows that the lab procedure can be improved to gain up to 13% particles at Tc in a speci fic situation. The optimization also shows that expanding the trap volume during the cooling process is less efficient than keeping the volume at the smallest achievable value in our setup, since the densities are not high enough for the loss processes to dominate. \n \nTo measure spin drag in BEC's, a measurement is prepared in the far off resonance trap in which two spinor condensates are accelerated towards a third condensate, where all three condensates are in diff erent spin states. The measurement shows that under the speci fic conditions of the experiment, the condensates collide inelastically. It was hypothesized that this could be explained by the immiscibility of di fferent spin condensates. This is refuted, since the force due to immiscibility is one order of magnitude smaller than necessary to explain the motion of the condensates.
This thesis reports on the two projects I have completed during my Bachelor's research at the Bose Einstein Condensate (BEC) research group of Peter van der Straten: optimizing evaporative cooling and measuring interactions between spinor condensates. \n \nTo create a BEC, the process of evaporative cooling is used. This process is modeled and optimized using a Monte-Carlo optimization, which shows that the lab procedure can be improved to gain up to 13% particles at Tc in a speci fic situation. The optimization also shows that expanding the trap volume during the cooling process is less efficient than keeping the volume at the smallest achievable value in our setup, since the densities are not high enough for the loss processes to dominate. \n \nTo measure spin drag in BEC's, a measurement is prepared in the far off resonance trap in which two spinor condensates are accelerated towards a third condensate, where all three condensates are in diff erent spin states. The measurement shows that under the speci fic conditions of the experiment, the condensates collide inelastically. It was hypothesized that this could be explained by the immiscibility of di fferent spin condensates. This is refuted, since the force due to immiscibility is one order of magnitude smaller than necessary to explain the motion of the condensates.
We have simulated the evaporative cooling of a dilute gas of Bose particles including quantum statistics using a Monte Carlo method. This approach can model situations which are far away from quasiequilibrium such as occur during forced evaporative cooling. We have also simulated the dynamical formation of Bose-Einstein condensate for homogeneous and inhomogeneous Bose gases under the random-phase approximation. It was found that the rate of accumulation of Bose particles into low-energy states through collisions is increased by forced evaporation; and a macroscopic population at ground state can be reached at a time scale characterized by classical collision time for an inhomogeneous gas in a harmonic potential. We present the results of simulations for the evaporative cooling and formation of a Bose-Einstein condensate in one-, two-, and three-dimensional position cuts and energy cuts.
In this thesis, I present a novel experimental system and an optimal experimental scheme for an all-optical production of a sodium spinor Bose-Einstein condensate (BEC). With this scheme, I demonstrate that the number of atoms in a pure BEC can be greatly boosted by a factor of 5 over some widely used schemes in a simple single-beam or crossed-beam optical trap. Our scheme avoids technical challenges associated with some all-optical BEC methods and may be applicable to other optically trappable atomic species. I also discuss an upper limit for evaporative cooling efficiency in all-optical BEC approaches, and a good agreement between our theoretical model and experimental data.
This thesis describes trapping and evaporative cooling of ultracold 87Sr and 88Sr mixtures in an optical dipole trap to produce the first Bose-Einstein condensate (BEC) of 88Sr. Furthermore, this work presents thermalization studies that characterize the scattering properties of these ultracold strontium samples. Such ultracold atomic gases have become an important area of research because of their potential for improving optical frequency standards and for realizing quantum computation using neutral atoms. A BEC of 88Sr is particularly interesting because the small value of its background s-wave scattering length may enable the use of optical Feshbach resonances to create two-dimensional solitons. However, the small scattering length for 88Sr also hinders efficient evaporative cooling in the optical dipole trap, a necessary step to producing a BEC. Experiments with other ultracold gases have successfully overcome this hurdle by mixing in a second atomic species which, by introducing stronger interactions with the weakly interacting species, enables evaporation to colder temperatures via sympathetic cooling. For this work, we use 87Sr to sympathetically cool 88Sr during forced evaporation to quantum degeneracy.\nPrevious experiments in the Killian Lab characterized 88Sr in detail. Here, I emphasize the new or improved aspects that have allowed trapping and cooling of the mixtures of 87Sr and 88 Sr: trapping of 87Sr by itself, spectroscopic measurements of all the stable strontium isotopes to guide the trapping of isotopic mixtures, imaging of both 87Sr and 88Sr, and the various trade-offs necessary to simultaneously trap 87Sr and 88Sr. Finally, I discuss how the thermalization studies of the scattering properties of the isotopes guide the forced evaporation of mixed isotope samples. These efforts result in the production of the BEC of 88Sr, but they also point the way to future studies of fermionic quantum degeneracy in 87Sr and to the rich physics of mixed species ultracold atomic systems.
The subject of this thesis is the use of BECs for atom interferometry. The standard way atom interferometry is today performed is by interrogating free falling samples of atoms. The employed samples are cold (but not condensed) to have high coherence, and dilute, not to interact significantly with each other. This technique represents nowadays an almost mature field of research in which the achievable interferometric sensitivity is bounded by the atomic shot noise. Until a few years ago the employment of BECs in such devices was strongly limited by the effect of the interactions between the condensed atoms. This obstacle is today removable exploiting interaction tuning techniques. The use of BECs would be advantageous for atom interferometry inasmuch they represents the matter analogue of the optical laser providing the maximum coherence allowed by quantum mechanics. Moreover, non-linear dynamic can be exploited in order to prepare entangled states of the system. The realization of entangled samples can lead to sub-shot noise sensitivity of the interferometers. At today very nice proof-of-principle experiments have been realized in this direction but a competitive device is still missing. This thesis work is inserted in a long term project whose goal is the realization of such a device. The basic operational idea of the project starts with the preparation of a BEC in a double well potential. By the effect of strong interactions the atomic system can be driven into an entangled state. Once the entangled state is prepared, interactions can be †switched off†and the interferometric sequence performed. This thesis begins with the description of the apparatus for the production of tunable BECs to be used in the interferometer. We chose to work with 39K atoms because this atomic species presents many convenient Feshabch resonances at easily accessible magnetic field values. The cooling of this particular atomic species presents many difficulties, both for the laser and evaporative cooling processes. For this reason, this was the last alkaline atom to be condensed. Its condensation up to now was only possible by employing sympathetic cooling with another species. In this thesis our solutions to the various cooling issues is reported. In particular we realized sub-Doppler cooling for the first time for this species and we achieved condensation via evaporation in an optical dipole trap taking advantage of a Feshbach resonance. In the last part of this work, are presented original calculations for the effects of thermal fluctuations on the coherence of a BEC in a double well, discussing the interplay between thermal fluctuations and interactions in this system. Estimations and feasibility studies regarding the double well trap to be realized are also reported.
This thesis reports on a study of the molecular Bose-Einstein condensation (mBEC) of the 6Li. More specifically, using model the Hartree-Fock (HF) model to fit the spatial density of the cloud, we demonstrate that the thermal cloud deplete the condensate, therefore a lower temperature is needed to condense the atoms in the ground state. Moreover the inter-atomic interactions can be controlled via Feshbach resonance (see section 2.2), allowing us to study the effects of the interactions on the thermodynamics properties of a mBEC, especially the critical temperature of the BEC that decreases when we increase the inter-atomic interactions. The description starts from the experimental procedure to produce a mBEC to its physical analysis. We draw a list describing the different chapters presented in the thesis: Chapter 1 Introduction: We present the fundamental difference between fermions and bosons, and we give some example of realisations of Bose-Einstein condensation and degenerate Fermi gas. Chapter 2 Interactions in an ultracold gas: We discuss the role of interactions depending on the type of particles, either fermions or bosons, and the phenomena of Feshbach resonance which is a powerful tool to change the interaction strength between particles. Chapter 3 Degenerate quantum gas: A brief historical section gives the fundamental ideas that initiate the long story of the Bose-Einstein condensation phenomena. We then discuss the mathematical description of a BEC without interactions, which is the starting point of the theoretical analysis used in the chapter 3 where we study the influence of the interactions. Then, we describe the statistics of Fermi gas and the different states that can be reached using Feshbach resonances, in particular the creation of the Feshbach molecules. Chapter 4 Basics of Cold atoms physics: A toolbox of the necessary knowledge to understand the underlying phenomena and concepts used in a cold atoms experiment. We describe the kind of atoms used, how these atoms interact with a magnetic and an electromagnetic field. Chapter 5 Guideline to making a 6Li BEC: This chapter describes the experimental methods used in our laboratory to cool down atoms to the regime of ultra-cold temperature T < 1µK. This section gives details about atomic beams production, the Zeemann slower (radiation force cooling), the magnetooptical trap (MOT) (cooling b molasses), optical dipole trap (evaporative cooling). Also we present the methods used to probe atomic clouds, such as in situ imaging methods. My contribution to this section has been to improve the stability of the evaporative cooling sequence (see section 5.4.4) and to optimize the shape of the the evaporative cooling ramp (see section 5.4.1) in order to maximise the phase space density (PSD), to reach Bose-Einstein condensation. Then, to make precise simulations and measurements to extract values of the trapping frequencies (see section 5.4.5) and scattering length (see section 5.5.4), the latter gives us the interaction strength of the system. These parameter are then used in the next chapter to extract thermodynamics properties of the system. Moreover, I developed the sequence for in situ absorption imaging (see section 5.5.3). Chapter 6 Study of an interacting 6Li mBEC: This chapter discusses the theory to understand the thermodynamics properties of an interacting Bose6 Einstein condensate. It is accomplished by fitting the spatial atomic density profiles with different models, the ideal gas (IG) model, the semi-Ideal (SI) gas model and the Hartree-Fock (HF) model. These three models vary in complexity from the most simple one the IG model to most elaborated one the HF model. The HF model requires a lot more of computational power than the other methods, therefore we present a new numerical method requiring less computational power proposed by Nathan Welch, and demonstrate experimentally through a statistical analysis that the HF model used to determine the thermodynamics properties of a BEC is more accurate to describe utracold atomic gas near the transition. Then, we present the results of the influence of the scattering length on the transition temperature and the chemical potential. My contribution to this section has been to develop tools to analyse the in situ atomic density profiles and improve the fitting program of Nathan (see section 6.3). Also, after taking the measurement of the in situ atomic density profiles, I developed and used the tools for the analysis of the thermodynamics properties of the mBEC (see section 6.4). I also adapted the models described in [1] to our experiment to extract the value of the radius of the condensate (see section 6.5). Finally, with N.Welch we present method based on energy conservation to verify the validity of the different model, my principal contribution to this was to modify the experiment to use this method (see section 6.7). Chapter 7 Initial work: Double well with 6Li molecules: This chapter presents the initial work to produce a double well potential to trap cold atoms and create a Josephson Junction. We present the state of the art of the different effects that have been observed, and discuss future measurements that would be achievable in our laboratory, in particular we would like to use a second specie 133Cs as impurities and observe the influence on Josephson oscillations of 6Li molecules. An experimental description of the double well trapping potential has been implemented and is also described. My contribution to this section was to design and implement the double well trapping potential.
The dynamics of evaporative cooling of magnetically trapped 87 Rb atoms is studied on the basis of the quantum kinetic theory of a Bose gas. The theoretical optimization of the cooling trajectory clarifies that the acceleration of evaporative cooling around the transition point of Bose-Einstein condensation is very effective against serious three-body recombination loss. The number of condensed atoms is expected to be largely enhanced by the optimization as compared with the typical value produced by the conventional evaporative cooling, where the frequency of the radio-frequency magnetic field is swept exponentially. Next, we precisely examine how the growth of a condensate depends on the experimental parameters of evaporative cooling in this inefficient exponential-sweep cooling. We find that, due to large nonlinear three-body loss, the number of condensed atoms finally becomes insensitive to the initial number of trapped atoms, the initial temperature, and the bias field of a magnetic trap. This result opens up the experimental possibility that the final number of condensed atoms can be well stabilized against the shot-to-shot fluctuations of experimental conditions in evaporative cooling.