Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE International Conference on Quantum Computing and Engineering (QCE)

Disparity Surface Code: Optimizing Error Correction in Quantum Networks

Tianjie Hu, Jindi Wu, Qun Li

Published Aug 30, 2025• 1 citation
Publisher

Abstract

Practical quantum computing requires error rates much lower than those achievable with physical qubits. Surface codes provide a reliable method to implement logical qubits using physical qubits. However, when these physical qubits are transmitted within quantum networks, their error rates can vary due to differences in the routing paths. Our experimental results indicate that the geometric arrangement of these physical qubits within a surface code significantly impacts its logical error rate. In this paper, we address this issue by proposing disparity surface codes, which are a group of geometric configurations for surface codes that adapt them for transmission within quantum networks. For a distance-$d$disparity surface code, only$d$physical qubits need to be transmitted with low error rates, and we identify multiple equivalent choices for selecting these$d$qubits. Additionally, we propose Di-MWPM, a new decoder designed to exploit physical error rate disparity for enhanced error correction. Results demonstrate that disparity surface codes maintain favorable performance in different network scenarios, even under high noise conditions. Our Di-MWPM decoder achieves improved Pauli-error thresholds.

DOI
10.1109/qce65121.2025.00270

Related papers

Suppressing quantum errors by scaling a surface code logical qubit

Google Quantum AI, Rajeev Acharya, I. L. Aleǐner +97 more

Abstract Practical quantum computing will require error rates well below those achievable with physical qubits. Quantum error correction 1,2 offers a path to algorithmically relevant error rates by encoding logical qubits within many physical qubits, for which increasing the number of physical qubits enhances protection against physical errors. However, introducing more qubits also increases the number of error sources, so the density of errors must be sufficiently low for logical performance to improve with increasing code size. Here we report the measurement of logical qubit performance scaling across several code sizes, and demonstrate that our system of superconducting qubits has sufficient performance to overcome the additional errors from increasing qubit number. We find that our distance-5 surface code logical qubit modestly outperforms an ensemble of distance-3 logical qubits on average, in terms of both logical error probability over 25 cycles and logical error per cycle ((2.914 ± 0.016)% compared to (3.028 ± 0.023)%). To investigate damaging, low-probability error sources, we run a distance-25 repetition code and observe a 1.7 × 10 −6 logical error per cycle floor set by a single high-energy event (1.6 × 10 −7 excluding this event). We accurately model our experiment, extracting error budgets that highlight the biggest challenges for future systems. These results mark an experimental demonstration in which quantum error correction begins to improve performance with increasing qubit number, illuminating the path to reaching the logical error rates required for computation.

arXiv:2207.06431•Nature•Feb 22, 2023•1,104 citations

Machine Learning Based Decoders for Near-Term Quantum Surface Codes: Performance and Pseudothreshold Analysis

Veeresh Kuruba, E. S. Shivaleela, Srinivas T

Quantum error correction (QEC) is crucial for achieving fault-tolerant quantum computing by addressing errors in noisy qubits. The surface code, a leading QEC framework, traditionally employs the Minimum Weight Perfect Matching (MWPM) decoder. We present a step-by-step methodology that formulates surface code decoding as a supervised machine learning classification problem within a two-level framework, where low-level modules address physical qubit errors and highlevel modules correct logical errors. We implement Feedforward Neural Networks (FFNN) and Graph Neural Networks (GNN), which are individually employed to perform low-level physical qubit error correction and high-level logical error correction for rotated surface codes of distances$d=3, d=5$, and$d=7$. Under depolarizing noise, both FFNN and GNN achieve lower logical error rates than MWPM, with GNN yielding up to 28% improvement at$d=7$. GNN achieves pseudothresholds of 0.1084, 0.1311, and 0.1441 for$d=3, d=5$, and$d=7$, surpassing MWPM's 0.0914, 0.1024, and 0.1126. Crossover points further indicate GNN's robustness at higher noise levels (e.g., 0.1632 vs. 0.1291 for MWPM). By learning error distributions in a two-level setting, both FFNN and GNN outperform MWPM, demonstrating their potential as scalable, high-performance decoders for near-term quantum devices.

IEEE Pune Section International Conference (PuneCon)•Dec 12, 2025•0 citations

Developing a Practical Neural-Network Surface Code Decoder under Circuit-Level Noise

Aarush Pancholi

Abstract. Suppressing qubit errors is one of the main challenges in building fault-tolerant quantum computers, requiring quantum error correction to protect fragile quantum information during computation cycles. The surface code is a leading approach because of its high error tolerance and compatibility with realistic hardware, but it requires a decoder that can accurately and quickly use the syndrome measurements to discern whether a logical error has occurred. This study investigates whether a feedforward neural-network can serve as a practical decoder for the surface code under circuit-level noise. Using the Stim software package, this study generates surface code circuits at multiple code distances and physical error rates and compiles them into detector samplers, then trains a PyTorch neural-network to predict whether a logical observable flip occurred from the syndrome data. The neural-network decoder is compared against Minimum-Weight Perfect Matching (MWPM), focusing on metrics including logical error rate and inference speed. The results show that the neural-network decoder performs competitively with MWPM for code distances 3 and 5 and provides inference time advantages at higher physical error rates as its inference time remains relatively constant over increasing physical error rates. However, MWPM outperforms the neural-network at distance 7, suggesting that scalability remains a major limitation for neural-network decoders. These results show that neural-networks are a promising approach for tackling quantum error correction, although future work is still needed to improve these models for real systems at larger code distances.

•Aug 2, 2026•0 citations

Quantum Network Routing based on Surface Code Error Correction

Tianjie Hu, Jindi Wu, Qun Li

Quantum networks encounter unavoidable channel noises and erasure errors, presenting a huge obstacle in designing protocols that attain both high reliability and efficiency. Typically, quantum networks fall into two categories: those utilize quantum entanglements for quantum teleportation, and those directly transfer the actual quantum messages. In this paper, we present SurfNet, a quantum network that inherits the main advantages from both categories. It employs surface codes as logical qubits for encoding messages, and utilizes two parallel communication channels to fault-tolerantly transfer each surface code in a modular manner. Our approach of using surface codes can timely correct both operational and photon loss errors within the network, and the integration of the two channels within the network can greatly improve network throughput. For the implementation of SurfNet, we propose a novel network architecture, designed to better integrate surface codes into quantum networks. We also propose a novel error correction decoder, designed to fully utilize the modular characteristic of surface codes within our network. Simulation results demonstrate that SurfNet with its decoder significantly enhances the communication fidelity within quantum networks.

quant-pharXiv:2606.12781•IEEE International Conference on Distributed Computing Systems (ICDCS)•Jun 12, 2026•5 citations

Decoding the surface code using graph neural networks

Moritz Lange

Quantum error correction is essential to achieve fault-tolerant quantum computation in the presence of noisy qubits. Among the most promising approaches to quantum error correction is the surface code, thanks to a scalable two-dimensional architecture, only nearest-neighbor interactions, and a high error threshold. Decoding the surface code, i.e. finding the most likely error chain given a syndrome measurement outcome is a computationally complex task. Traditional decoders rely on classical algorithms, which, especially for larger systems, can be slow and may not always converge to the optimal solution. This thesis presents a novel approach to decoding the surface code using graph neural networks. By mapping the syndrome measurements to a graph and performing graph classification, we find that the graph neural networks can predict the most likely error configuration with high accuracy. Our results show that the GNN-based decoder outperforms the classic minimum weight perfect matching (MWPM) decoder in terms of accuracy. With a phenomenological noise model with depolarizing noise and perfect syndrome measurements, our networks beat MWPM up to code-size 15 across all relevant error rates. Furthermore, the GNN is capable of surpassing MWPM under circuit-level noise up to code size 7. We also show that training the network on repetition code data from a recent experiment [Google Quantum AI, Nature 614, 676 (2023)] produces per-step error rates comparable to those achieved with a matching decoder specifically adapted to the error rates of the physical qubits. This indicates that graph neural network decoders are capable of learning the underlying error distribution on the qubits. Our findings advance the field of quantum error correction and provide a promising new direction for the development of efficient decoding algorithms.

•Oct 17, 2023•0 citations

Quantum error correction below the surface code threshold

Google Quantum AI and Collaborators, Rajeev Acharya, Dmitry A. Abanin +97 more

Quantum error correction [1, 2, 3, 4] provides a path to reach practical quantum computing by combining multiple physical qubits into a logical qubit, where the logical error rate is suppressed exponentially as more qubits are added. However, this exponential suppression only occurs if the physical error rate is below a critical threshold. Here, we present two below-threshold surface code memories on our newest generation of superconducting processors, Willow: a distance-7 code, and a distance-5 code integrated with a real-time decoder. The logical error rate of our larger quantum memory is suppressed by a factor of $$\varLambda \mathrm{=2.14}\pm 0.02$$ when increasing the code distance by two, culminating in a 101-qubit distance-7 code with 0.143% ± 0.003% error per cycle of error correction. This logical memory is also beyond break-even, exceeding its best physical qubit’s lifetime by a factor of $$2.4\pm 0.3$$ . Our system maintains below-threshold performance when decoding in real time, achieving an average decoder latency of 63 μs at distance-5 up to a million cycles, with a cycle time of 1.1 μs. We also run repetition codes up to distance-29 and find that logical performance is limited by rare correlated error events occurring approximately once every hour, or $$3$$ $$\times $$ $${10}^{9}$$ cycles. Our results present device performance that, if scaled, could realize the operational requirements of large scale fault-tolerant quantum algorithms.

arXiv:2408.13687•Nature•Dec 9, 2024•778 citations
Practical quantum computing requires error rates much lower than those achievable with physical qubits. Surface codes provide a reliable method to implement logical qubits using physical qubits. However, when these physical qubits are transmitted within quantum networks, their error rates can vary due to differences in the routing paths. Our experimental results indicate that the geometric arrangement of these physical qubits within a surface code significantly impacts its logical error rate. In this paper, we address this issue by proposing disparity surface codes, which are a group of geometric configurations for surface codes that adapt them for transmission within quantum networks. For a distance-ddddisparity surface code, onlydddphysical qubits need to be transmitted with low error rates, and we identify multiple equivalent choices for selecting thesedddqubits. Additionally, we propose Di-MWPM, a new decoder designed to exploit physical error rate disparity for enhanced error correction. Results demonstrate that disparity surface codes maintain favorable performance in different network scenarios, even under high noise conditions. Our Di-MWPM decoder achieves improved Pauli-error thresholds.
Abstract Practical quantum computing will require error rates well below those achievable with physical qubits. Quantum error correction 1,2 offers a path to algorithmically relevant error rates by encoding logical qubits within many physical qubits, for which increasing the number of physical qubits enhances protection against physical errors. However, introducing more qubits also increases the number of error sources, so the density of errors must be sufficiently low for logical performance to improve with increasing code size. Here we report the measurement of logical qubit performance scaling across several code sizes, and demonstrate that our system of superconducting qubits has sufficient performance to overcome the additional errors from increasing qubit number. We find that our distance-5 surface code logical qubit modestly outperforms an ensemble of distance-3 logical qubits on average, in terms of both logical error probability over 25 cycles and logical error per cycle ((2.914 ± 0.016)% compared to (3.028 ± 0.023)%). To investigate damaging, low-probability error sources, we run a distance-25 repetition code and observe a 1.7 × 10 −6 logical error per cycle floor set by a single high-energy event (1.6 × 10 −7 excluding this event). We accurately model our experiment, extracting error budgets that highlight the biggest challenges for future systems. These results mark an experimental demonstration in which quantum error correction begins to improve performance with increasing qubit number, illuminating the path to reaching the logical error rates required for computation.
Quantum error correction (QEC) is crucial for achieving fault-tolerant quantum computing by addressing errors in noisy qubits. The surface code, a leading QEC framework, traditionally employs the Minimum Weight Perfect Matching (MWPM) decoder. We present a step-by-step methodology that formulates surface code decoding as a supervised machine learning classification problem within a two-level framework, where low-level modules address physical qubit errors and highlevel modules correct logical errors. We implement Feedforward Neural Networks (FFNN) and Graph Neural Networks (GNN), which are individually employed to perform low-level physical qubit error correction and high-level logical error correction for rotated surface codes of distancesd=3,d=5d=3, d=5d=3,d=5, andd=7d=7d=7. Under depolarizing noise, both FFNN and GNN achieve lower logical error rates than MWPM, with GNN yielding up to 28% improvement atd=7d=7d=7. GNN achieves pseudothresholds of 0.1084, 0.1311, and 0.1441 ford=3,d=5d=3, d=5d=3,d=5, andd=7d=7d=7, surpassing MWPM's 0.0914, 0.1024, and 0.1126. Crossover points further indicate GNN's robustness at higher noise levels (e.g., 0.1632 vs. 0.1291 for MWPM). By learning error distributions in a two-level setting, both FFNN and GNN outperform MWPM, demonstrating their potential as scalable, high-performance decoders for near-term quantum devices.
Abstract. Suppressing qubit errors is one of the main challenges in building fault-tolerant quantum computers, requiring quantum error correction to protect fragile quantum information during computation cycles. The surface code is a leading approach because of its high error tolerance and compatibility with realistic hardware, but it requires a decoder that can accurately and quickly use the syndrome measurements to discern whether a logical error has occurred. This study investigates whether a feedforward neural-network can serve as a practical decoder for the surface code under circuit-level noise. Using the Stim software package, this study generates surface code circuits at multiple code distances and physical error rates and compiles them into detector samplers, then trains a PyTorch neural-network to predict whether a logical observable flip occurred from the syndrome data. The neural-network decoder is compared against Minimum-Weight Perfect Matching (MWPM), focusing on metrics including logical error rate and inference speed. The results show that the neural-network decoder performs competitively with MWPM for code distances 3 and 5 and provides inference time advantages at higher physical error rates as its inference time remains relatively constant over increasing physical error rates. However, MWPM outperforms the neural-network at distance 7, suggesting that scalability remains a major limitation for neural-network decoders. These results show that neural-networks are a promising approach for tackling quantum error correction, although future work is still needed to improve these models for real systems at larger code distances.
Quantum networks encounter unavoidable channel noises and erasure errors, presenting a huge obstacle in designing protocols that attain both high reliability and efficiency. Typically, quantum networks fall into two categories: those utilize quantum entanglements for quantum teleportation, and those directly transfer the actual quantum messages. In this paper, we present SurfNet, a quantum network that inherits the main advantages from both categories. It employs surface codes as logical qubits for encoding messages, and utilizes two parallel communication channels to fault-tolerantly transfer each surface code in a modular manner. Our approach of using surface codes can timely correct both operational and photon loss errors within the network, and the integration of the two channels within the network can greatly improve network throughput. For the implementation of SurfNet, we propose a novel network architecture, designed to better integrate surface codes into quantum networks. We also propose a novel error correction decoder, designed to fully utilize the modular characteristic of surface codes within our network. Simulation results demonstrate that SurfNet with its decoder significantly enhances the communication fidelity within quantum networks.
Quantum error correction is essential to achieve fault-tolerant quantum computation in the presence of noisy qubits. Among the most promising approaches to quantum error correction is the surface code, thanks to a scalable two-dimensional architecture, only nearest-neighbor interactions, and a high error threshold. Decoding the surface code, i.e. finding the most likely error chain given a syndrome measurement outcome is a computationally complex task. Traditional decoders rely on classical algorithms, which, especially for larger systems, can be slow and may not always converge to the optimal solution. This thesis presents a novel approach to decoding the surface code using graph neural networks. By mapping the syndrome measurements to a graph and performing graph classification, we find that the graph neural networks can predict the most likely error configuration with high accuracy. Our results show that the GNN-based decoder outperforms the classic minimum weight perfect matching (MWPM) decoder in terms of accuracy. With a phenomenological noise model with depolarizing noise and perfect syndrome measurements, our networks beat MWPM up to code-size 15 across all relevant error rates. Furthermore, the GNN is capable of surpassing MWPM under circuit-level noise up to code size 7. We also show that training the network on repetition code data from a recent experiment [Google Quantum AI, Nature 614, 676 (2023)] produces per-step error rates comparable to those achieved with a matching decoder specifically adapted to the error rates of the physical qubits. This indicates that graph neural network decoders are capable of learning the underlying error distribution on the qubits. Our findings advance the field of quantum error correction and provide a promising new direction for the development of efficient decoding algorithms.
Quantum error correction [1, 2, 3, 4] provides a path to reach practical quantum computing by combining multiple physical qubits into a logical qubit, where the logical error rate is suppressed exponentially as more qubits are added. However, this exponential suppression only occurs if the physical error rate is below a critical threshold. Here, we present two below-threshold surface code memories on our newest generation of superconducting processors, Willow: a distance-7 code, and a distance-5 code integrated with a real-time decoder. The logical error rate of our larger quantum memory is suppressed by a factor of Λ=2.14±0.02\varLambda \mathrm{=2.14}\pm 0.02Λ=2.14±0.02 when increasing the code distance by two, culminating in a 101-qubit distance-7 code with 0.143% ± 0.003% error per cycle of error correction. This logical memory is also beyond break-even, exceeding its best physical qubit’s lifetime by a factor of 2.4±0.32.4\pm 0.32.4±0.3 . Our system maintains below-threshold performance when decoding in real time, achieving an average decoder latency of 63 μs at distance-5 up to a million cycles, with a cycle time of 1.1 μs. We also run repetition codes up to distance-29 and find that logical performance is limited by rare correlated error events occurring approximately once every hour, or 333 ×\times × 109{10}^{9}109 cycles. Our results present device performance that, if scaled, could realize the operational requirements of large scale fault-tolerant quantum algorithms.