Applied Optics and Photonics China (AOPC)
Optimization of laser collimator characteristics for enhanced performance in a rubidium atomic fountain clock
Yang Bai, Hui Zhang, Sichen Fan, Fan Liu, Jun Ruan
Abstract
The rubidium atomic fountain clock NTSC-RbF2 at the National Time Service Center (NTSC) operates in a (1,1,1) atomic fountain configuration, where six cooling laser beams are symmetrically arranged in pairs to form three orthogonal standing-wave fields in three-dimensional space. These fields are critical for efficient capture and laser cooling of ultracold atoms. Laser collimators convert the output beams from the laser system into parallel or quasi-parallel spatial profiles, which are essential for precise atom-light interactions. The collimators must meet stringent requirements for optical power, polarization, collimation, directionality, and spatial uniformity. These parameters significantly affect the spatial distribution and population of trapped atoms, directly influencing the signal-to-noise ratio (SNR) of the Ramsey interference signal. Moreover, the number of detected atoms determines the quantum projection noise limit, a key factor of the clock’s second-level frequency stability. To enhance the atom detection efficiency, the collimator tubes were meticulously designed and optimized to improve their collimation, directionality, and uniformity. Following precise alignment, the divergence angle of the output laser beam from each of the six collimators was reduced to below 0.1 mrad (collimation), the angular deviation between the output laser beam and the mechanical axis of the collimator was minimized to less than 0.1′ (directionality), and the spatial offset between the center of the output laser spot and the mechanical center of the collimator was confined to within 2 mm (uniformity). In comparison to its predecessor, NTSC-RbF1, the quantum projection noise contribution to the clock's second-level frequency stability was reduced from 1.39×10-13 to 8.26×10-14.