Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Laser & Photonics Review

Atto‐Watt Photo‐Detection at Mid‐Infrared Wavelengths by a Room‐Temperature Balanced Heterodyne Set‐Up

Lorenzo Mancini, Pierfrancesco Ulpiani, Chiara Vecchi, Leonardo Daga, Massimiliano Proietti, Carlo Liorni, Massimiliano Dispenza, Francesco Cappelli, Paolo De Natale, Simone Borri, Danièle Palaferri

Published Sep 24, 2025• 1 citation
Publisher

Abstract

Abstract Balanced heterodyne detection (BHD) is a key technology at visible and near‐infrared wavelengths for quantum communication and quantum sensing applications based on coherent read‐out schemes. Extending BHD at mid‐infrared wavelengths (4–11 µm), given the reduced scattering and favourable transparent atmospheric windows, could enable robust earth‐satellite links and few‐photon imaging in high‐noise environments. Currently, quantum applications at these wavelengths are hindered by the lack of high‐sensitivity, room‐temperature photoreceivers; moreover, mid‐infrared single‐photon‐detectors reported to date (superconductors, single‐electron‐transistors, or avalanche‐photodiodes) require cryogenic operation, limiting practicality. Here, a room‐temperature BHD system operating at 4.6 µm‐wavelength with atto‐watt sensitivity level, corresponding to a few tens of photons per second, is demonstrated. This result is obtained by selecting commercially available photodetectors with the highest detectivity and exploiting two heterodyne setups ‐one involving a single quantum‐cascade‐laser (QCL) and an acousto‐optic‐modulator (AOM), and the other one including two QCLs with mutual coherence ensured by a phase‐locked‐loop. Combining a sufficiently high local oscillator (LO) power and the high phase‐coherence between signal and LO is crucial to push the system noise‐equivalent‐power (NEP) to values approaching the shot‐noise‐limit, as confirmed by few‐photons interferometry measurements. This work not only validates viable methods to detect ultra‐low‐intensity signals, but is also potentially scalable to the entire wavelength range already accessible by state‐of‐the‐art mid‐infrared technology.

DOI
10.1002/lpor.202501339

Related papers

Near-single-photon atto-watt detection at mid-infrared wavelengths by a room-temperature balanced heterodyne set-up

Danièle Palaferri, Lorenzo Mancini, Chiara Vecchi +8 more

Abstract Single photon detection is the underpinning technology for quantum communication and quantum sensing applications. At visible and near-infrared wavelengths, single-photon-detectors (SPDs) underwent a significant development in the past two decades, with the commercialization of SPADs and superconducting detectors. At longer wavelengths, in the mid-infrared range (4-11µm), given the reduced scattering and favourable transparent atmospheric windows, there is an interest in developing quantum earth-satellites-links and quantum imaging for noisy environments or large-distance telescopes. Still, SPD-level mid-infrared devices have been rarely reported in the state-of-the-art (superconductors, single-electron-transistors or avalanche-photodiodes) and, crucially, all operating at cryogenic temperatures. Here, we demonstrate a room-temperature detection system operating at 4.6µm-wavelength with a sensitivity-level of atto-watt optical power, corresponding to few tens of mid-infrared photons. This result was obtained by exploiting a pair of commercially available photodetectors within two balanced-heterodyne-detection setups: one involving a quantum-cascade-laser (QCL) and an acousto-optic-modulator (AOM) and the other one including two QCLs with mutual coherence ensured by a phase-lock-loop (PLL). Our work not only validates a viable method to detect ultra-low-intensity signals, but is also potentially scalable to the entire wavelength range already accessible by mature QCL technology, unfolding - for the first time - quantum applications at mid- and long-wave-infrared-radiation.

arXiv:2412.09462•Feb 5, 2025•1 citation

Ultra‐sensitive heterodyne detection at room temperature in the atmospheric windows

Mohammadreza Saemian, Livia Del Balzo, Djamal Gacemi +9 more

We report room temperature heterodyne detection of a quantum cascade laser beaten with a local oscillator on a unipolar quantum photodetector in two different atmospheric windows, at 4.8 µm and 9 µm. A noise equivalent power of few pW is measured by employing an active stabilization technique in which the local oscillator and the signal are locked in phase. The measured heterodyne noise equivalent power is six orders of magnitude lower than that obtained with direct detection.

arXiv:2412.17633•Nanophotonics•Jan 17, 2024•8 citations

10.6 μm heterodyne receiver based on a superconducting hot-electron bolometer mixer and a quantum cascade laser

Yuan Ren, DaiXi Zhang, Kangmin Zhou +7 more

We report on the development of a heterodyne receiver at mid-infrared wavelength for high-resolution spectroscopy applications. The receiver employs a superconducting NbN hot electron bolometer as a mixer and a room temperature distributed feedback quantum cascade laser operating at 10.6 μm (28.2 THz) as a local oscillator. The stabilization of the heterodyne receiver has been achieved using a feedback loop controlling the output power of the laser. Improved Allan variance times as well as a double sideband receiver noise temperature of 5000 K and a noise bandwidth of 2.8 GHz of the receiver system are demonstrated.

AIP Advances•Jul 1, 2019•13 citations

On-chip coherent detection with quantum limited sensitivity

Vadim V. Kovalyuk, Simone Ferrari, Oliver Kahl +9 more

Abstract While single photon detectors provide superior intensity sensitivity, spectral resolution is usually lost after the detection event. Yet for applications in low signal infrared spectroscopy recovering information about the photon’s frequency contributions is essential. Here we use highly efficient waveguide integrated superconducting single-photon detectors for on-chip coherent detection. In a single nanophotonic device, we demonstrate both single-photon counting with up to 86% on-chip detection efficiency, as well as heterodyne coherent detection with spectral resolution f/∆f exceeding 1011. By mixing a local oscillator with the single photon signal field, we observe frequency modulation at the intermediate frequency with ultra-low local oscillator power in the femto-Watt range. By optimizing the nanowire geometry and the working parameters of the detection scheme, we reach quantum-limited sensitivity. Our approach enables to realize matrix integrated heterodyne nanophotonic devices in the C-band wavelength range, for classical and quantum optics applications where single-photon counting as well as high spectral resolution are required simultaneously.

Scientific Reports•Jun 30, 2017•19 citations

Mid-infrared homodyne balanced detector for quantum light characterization

Tecla Gabbrielli, Francesco Cappelli, Natalia Bruno +4 more

We present the characterization of a novel balanced homodyne detector operating in the mid-infrared. The challenging task of revealing non-classicality in mid-infrared light, e. g. in quantum cascade lasers emission, requires a high-performance detection system. Through the intensity noise power spectral density analysis of the differential signal coming from the incident radiation, we show that our setup is shot-noise limited. We discuss the experimental results with a view to possible applications to quantum technologies, such as free-space quantum communication.

arXiv:2103.08977•Optics Express•Mar 16, 2021•30 citations

Ultra-Stable Heterodyne Detection in the Mid-IR

Djamal Gacemi, Yanko Todorov, Azzurra Bigioli +2 more

In this work we demonstrate the use of a stabilized Mid-infrared quantum cascade laser as a local oscillator for ultra-sensitive Mid-IR heterodyne detection. We show a measurement of 80dB signal to noise ratio GHz heterodyne signal measured with a resolution bandwidth of 1 Hz using ultrafast quantum well infrared photodetector.

International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz)•Sep 1, 2018•0 citations
Abstract Balanced heterodyne detection (BHD) is a key technology at visible and near‐infrared wavelengths for quantum communication and quantum sensing applications based on coherent read‐out schemes. Extending BHD at mid‐infrared wavelengths (4–11 µm), given the reduced scattering and favourable transparent atmospheric windows, could enable robust earth‐satellite links and few‐photon imaging in high‐noise environments. Currently, quantum applications at these wavelengths are hindered by the lack of high‐sensitivity, room‐temperature photoreceivers; moreover, mid‐infrared single‐photon‐detectors reported to date (superconductors, single‐electron‐transistors, or avalanche‐photodiodes) require cryogenic operation, limiting practicality. Here, a room‐temperature BHD system operating at 4.6 µm‐wavelength with atto‐watt sensitivity level, corresponding to a few tens of photons per second, is demonstrated. This result is obtained by selecting commercially available photodetectors with the highest detectivity and exploiting two heterodyne setups ‐one involving a single quantum‐cascade‐laser (QCL) and an acousto‐optic‐modulator (AOM), and the other one including two QCLs with mutual coherence ensured by a phase‐locked‐loop. Combining a sufficiently high local oscillator (LO) power and the high phase‐coherence between signal and LO is crucial to push the system noise‐equivalent‐power (NEP) to values approaching the shot‐noise‐limit, as confirmed by few‐photons interferometry measurements. This work not only validates viable methods to detect ultra‐low‐intensity signals, but is also potentially scalable to the entire wavelength range already accessible by state‐of‐the‐art mid‐infrared technology.
Abstract Single photon detection is the underpinning technology for quantum communication and quantum sensing applications. At visible and near-infrared wavelengths, single-photon-detectors (SPDs) underwent a significant development in the past two decades, with the commercialization of SPADs and superconducting detectors. At longer wavelengths, in the mid-infrared range (4-11µm), given the reduced scattering and favourable transparent atmospheric windows, there is an interest in developing quantum earth-satellites-links and quantum imaging for noisy environments or large-distance telescopes. Still, SPD-level mid-infrared devices have been rarely reported in the state-of-the-art (superconductors, single-electron-transistors or avalanche-photodiodes) and, crucially, all operating at cryogenic temperatures. Here, we demonstrate a room-temperature detection system operating at 4.6µm-wavelength with a sensitivity-level of atto-watt optical power, corresponding to few tens of mid-infrared photons. This result was obtained by exploiting a pair of commercially available photodetectors within two balanced-heterodyne-detection setups: one involving a quantum-cascade-laser (QCL) and an acousto-optic-modulator (AOM) and the other one including two QCLs with mutual coherence ensured by a phase-lock-loop (PLL). Our work not only validates a viable method to detect ultra-low-intensity signals, but is also potentially scalable to the entire wavelength range already accessible by mature QCL technology, unfolding - for the first time - quantum applications at mid- and long-wave-infrared-radiation.
We report on the development of a heterodyne receiver at mid-infrared wavelength for high-resolution spectroscopy applications. The receiver employs a superconducting NbN hot electron bolometer as a mixer and a room temperature distributed feedback quantum cascade laser operating at 10.6 μm (28.2 THz) as a local oscillator. The stabilization of the heterodyne receiver has been achieved using a feedback loop controlling the output power of the laser. Improved Allan variance times as well as a double sideband receiver noise temperature of 5000 K and a noise bandwidth of 2.8 GHz of the receiver system are demonstrated.
Abstract While single photon detectors provide superior intensity sensitivity, spectral resolution is usually lost after the detection event. Yet for applications in low signal infrared spectroscopy recovering information about the photon’s frequency contributions is essential. Here we use highly efficient waveguide integrated superconducting single-photon detectors for on-chip coherent detection. In a single nanophotonic device, we demonstrate both single-photon counting with up to 86% on-chip detection efficiency, as well as heterodyne coherent detection with spectral resolution f/∆f exceeding 1011. By mixing a local oscillator with the single photon signal field, we observe frequency modulation at the intermediate frequency with ultra-low local oscillator power in the femto-Watt range. By optimizing the nanowire geometry and the working parameters of the detection scheme, we reach quantum-limited sensitivity. Our approach enables to realize matrix integrated heterodyne nanophotonic devices in the C-band wavelength range, for classical and quantum optics applications where single-photon counting as well as high spectral resolution are required simultaneously.
We present the characterization of a novel balanced homodyne detector operating in the mid-infrared. The challenging task of revealing non-classicality in mid-infrared light, e. g. in quantum cascade lasers emission, requires a high-performance detection system. Through the intensity noise power spectral density analysis of the differential signal coming from the incident radiation, we show that our setup is shot-noise limited. We discuss the experimental results with a view to possible applications to quantum technologies, such as free-space quantum communication.