With the growing demand for efficient computing to tackle complex real-world challenges like combinatorial optimization, both academia and industry are exploring alternative computing paradigms. The Ising machine (IM) is one such approach, solving optimization problems by mapping their cost functions onto the Ising model. In this framework, finding the optimal solution equates to determining the Ising spin configuration corresponding to the ground state of the Ising Hamiltonian. Analog IMs, relying on artificial spins that can take analogue rather than binary values, have shown great potential in reaching this ground at high speeds. Optical implementations, such as the opto-electronic IM developed within our research group, are particularly promising due to their higher bandwidth, energy efficiency, and lower latency compared to electronic IMs. However, scaling remains a challenge for large problems. To overcome this, we propose a novel analog optical IM utilizing a spatial light modulator (SLM). Our design differs from other IMs relying on SLMs by employing analog spin variables instead of binary ones and leveraging gradient descent-based feedback rather than a computer-driven Metropolis–Hastings sampling process. By exploiting the inherent parallelism of light, this SLM-based IM is expected to efficiently handle optimization problems with millions of spins while still maintaining high energy efficiency. At the conference, we will also offer more insight into the performance of these analogue IMs and will delve deeper in the bit resolution required for the different optical components such as the employed SLM. Based on the dynamical evolution of the IM, we will discuss strategies to further improve the problem-solving capacity and speed of these optical IMs.
With the growing demand for efficient computing to tackle complex real-world challenges like combinatorial optimization, both academia and industry are exploring alternative computing paradigms. The Ising machine (IM) is one such approach, solving optimization problems by mapping their cost functions onto the Ising model. In this framework, finding the optimal solution equates to determining the Ising spin configuration corresponding to the ground state of the Ising Hamiltonian. Analog IMs, relying on artificial spins that can take analogue rather than binary values, have shown great potential in reaching this ground at high speeds. Optical implementations, such as the opto-electronic IM developed within our research group, are particularly promising due to their higher bandwidth, energy efficiency, and lower latency compared to electronic IMs. However, scaling remains a challenge for large problems. To overcome this, we propose a novel analog optical IM utilizing a spatial light modulator (SLM). Our design differs from other IMs relying on SLMs by employing analog spin variables instead of binary ones and leveraging gradient descent-based feedback rather than a computer-driven Metropolis–Hastings sampling process. By exploiting the inherent parallelism of light, this SLM-based IM is expected to efficiently handle optimization problems with millions of spins while still maintaining high energy efficiency. At the conference, we will also offer more insight into the performance of these analogue IMs and will delve deeper in the bit resolution required for the different optical components such as the employed SLM. Based on the dynamical evolution of the IM, we will discuss strategies to further improve the problem-solving capacity and speed of these optical IMs.
Many problems in mathematics, statistical mechanics, and computer science are hard to tackle by conventional computational methods, but can be reduced to the combinatorial problem of finding the ground state of the Ising model. However, the computational cost associated with a combinatorial optimization problem increases exponentially with the number of variables. This explains growing research interest towards physical and artificial spin-networks (schematically shown in Fig. 1 (a) ) that evolve according to an Ising Hamiltonian, which provides the combinatorial solution through the ground state observed in the experiment [1] . The implementation of analog autonomous spin-networks is currently considered a highly attractive prospect due to a potentially significant increase in energy efficiency and processing speed.
The Ising machine (IM) has emerged as a promising tool for tackling nondeterministic polynomial-time hard combinatorial optimization problems in real-world applications. Among various types of IMs, optoelectronic IMs based on electro-optical (EO) modulators stand out as an impressive platform for Ising computations. They offer a simple and stable architecture, with the EO modulator providing a natural inline nonlinear transfer function for the Ising model. However, integrated optoelectronic IMs have not been demonstrated until now, and exploring large-scale computations within the constraints of digital hardware resources remains an open challenge for these systems. In this paper, an integrated optoelectronic IM based on a thin-film lithium niobate (TFLN) photonic chip is presented, in conjunction with a sparse matrix–vector multiplication algorithm embedded in a field-programmable gate array that optimizes hardware resource utilization and minimizes computational latency. This setup allows us to solve multiple types of MAX-CUT problems with up to 2048 spins and achieve a remarkably low iteration latency of 1.78 μs. To further address the constraints posed by digital devices when tackling larger-scale Ising problems, we extend the application of the TFLN chip to yet another new scheme in which the single, compact on-chip modulator concurrently performs operations of linear multiplication and nonlinear transformation. This scheme demonstrates the capability to address large-scale MAX-CUT problems involving up to 16,384 spins, which, to the best of our knowledge, are the largest-scale problems solved on an on-chip IM, highlighting its potential to overcome digital limitations. The TFLN-based optoelectronic IMs provide a compact solution with high scalability for potentially practical applications in addressing complex combinatorial optimization problems.
Combinatorial optimization problems are central to many challenges in logistics, finance, engineering, and the life sciences, yet they remain among the most computationally demanding. Many of these problems can be mapped onto the Ising model, in which binary spins interact through a network of couplings, and solutions correspond to low-energy, ideally ground-state, spin configurations. Photonic Ising machines have the potential to be fast and energy-efficient heuristic solvers of optimization problems by leveraging the low latency, high bandwidth, and inherent parallelism of optics. However, current photonic implementations remain limited in scalability, connectivity, reconfigurability, and time-to-solution, preventing their use in many practical applications. In this perspective, we examine the current landscape of photonic Ising machines, discuss the challenges and limitations of existing platforms, and identify the scientific and technological advances needed to realize large-scale systems. These developments could establish photonic Ising machines as useful hardware platforms for practical optimization.
The demand for efficient solvers of complicated combinatorial optimization problems, especially those classified as NP-complete or NP-hard, has recently led to increased exploration of novel computing architectures. One prominent collective state computing paradigm embodied in the so-called Ising machines has recently attracted considerable research attention due to its ability to optimize complex problems with large numbers of interacting variables. Ising model-inspired solvers, thus named due to mathematical similarities to the well-known model from solid-state physics, represent a promising alternative to traditional von Neumann computer architectures due to their high degree of inherent parallelism. While there are many possible physical realizations of Ising solvers, just as there are many possible implementations of any binary computer, photonic Ising machines (PIMs) use primarily optical components for computation, taking advantage of features like lower power consumption, fast calculation speeds, the leveraging of physical optics to perform the calculations themselves, possessing decent scalability and noise tolerance. Photonic computing in the form of PIMs may offer certain computational advantages that are not easily achieved with non-photonic approaches and is nonetheless an altogether fascinating application of photonics to computing. In this review, we provide an overview of Ising machines generally, introducing why they are useful, what types of problems they can tackle, and how different Ising solvers can be compared and benchmarked. We delineate their various operational mechanisms, advantages, and limitations vis-à-vis non-photonic Ising machines. We describe their scalability, interconnectivity, performance, and physical dimensions. As research in PIMs continues to progress, there is a potential that photonic computing could well emerge as a way to handle large and challenging optimization problems across diverse domains. This review serves as a comprehensive resource for researchers and practitioners interested in understanding capabilities and potential of PIMs in addressing such complex optimization problems.
Abstract Drawing inspiration from the physical Ising model, optical Ising machines have emerged as a promising paradigm in optical computing. These machines typically utilize optical phase or amplitude modulators to represent the analog spin variables, which determine the final Hamiltonian by the combinatorial configuration of the complex optical field. However, current optical modulators exhibit relatively low modulation resolution and significant technical challenges arise when scaling up optical Ising systems to maintain consistent performance across integrated device clusters. Here we propose a programmable optical differential Ising machine that provides direct access to changes in the Hamiltonian. This system streamlines unnecessary matrix calculations, thereby reducing the requirements for the size and precision of the modulator matrix. Through numerical simulations on 60 to 100 spin MaxCut benchmark problems, we determine that the minimum required resolutions for the DAC and ADC are 6 bits and 5 bits, respectively, along with a significant tolerance of 0.3 rad for phase errors and over 10 multiplexing operations. Additionally, 100-spin experiments with a dual-channel system demonstrate its potential for phase transition simulation and solving complex optimization challenges.
Abstract Solving large-scale Quadratic Unconstrained Binary Optimization (QUBO) problems is critical in various fields, including finance, physics, biology and engineering. However, these problems remain intractable on conventional computing architectures. As a result, alternative solvers—such as Ising Machines (IMs) based on networks of coupled electronic, mechanical or photonic parametric oscillators (POs)—have recently been developed. PO-based Ising Machines (IMs) aim to find the ground state of an Ising Hamiltonian, which encodes the solution to a QUBO problem. However, they rely on an energy minimization process based on gradient descent, making them inherently susceptible to getting trapped in local minima and, as a result, to identifying inaccurate solutions. In this work, we introduce and validate a QUBO solver—the Analog Floquet Solver (AFS)—which enhances the dynamics of PO-based Ising machines (IMs) by leveraging Floquet states that emerge spontaneously in POs coupled to high quality-factor resonances. These states enable the AFS to embed periodic time modulation into its energy minimization process, allowing it to escape local minima during the search for QUBO problems’ solutions. As a result, the AFS significantly increases the likelihood of identifying accurate solutions compared to conventional PO-based IMs. More generally, this work establishes a new paradigm in analog computing that can be physically implemented using existing technologies across a variety of physical domains.