Microwave-to-optical transducers facilitate the distributed quantum network by combining the high-speed information-processing abilities of superconducting circuits with the long-distance, low-loss transmitting capabilities of optical photons. Besides core metrics such as high efficiency, low noise, and wide bandwidth, practical and scalable transducers also demand a compact footprint and frequency tunability. In this work, we propose an integrated and tunable transducer that combines a coplanar waveguide microwave resonator with a magno-optomechanical microcavity via flip-chip bonding. Benefiting from the broad frequency tunability of the magnon mode, the working frequency range can be tuned over several gigahertz. Through optimization of the geometry and pump powers, our design achieves a theoretical microwave-to-optical photon conversion efficiency exceeding 50% using experimentally achievable parameters, alongside a bandwidth greater than 10 kHz. An added noise near the quantum limit $(\ensuremath{\sim}1)$ is achievable at 10 mK using lower pump powers at the cost of conversion efficiency or a pulsed-pump protocol. By merging compact integration with wide frequency tunability, this platform offers a promising pathway toward scalable quantum networks.
Microwave-to-optical transducers facilitate the distributed quantum network by combining the high-speed information-processing abilities of superconducting circuits with the long-distance, low-loss transmitting capabilities of optical photons. Besides core metrics such as high efficiency, low noise, and wide bandwidth, practical and scalable transducers also demand a compact footprint and frequency tunability. In this work, we propose an integrated and tunable transducer that combines a coplanar waveguide microwave resonator with a magno-optomechanical microcavity via flip-chip bonding. Benefiting from the broad frequency tunability of the magnon mode, the working frequency range can be tuned over several gigahertz. Through optimization of the geometry and pump powers, our design achieves a theoretical microwave-to-optical photon conversion efficiency exceeding 50% using experimentally achievable parameters, alongside a bandwidth greater than 10 kHz. An added noise near the quantum limit (\ensuremath∼1) is achievable at 10 mK using lower pump powers at the cost of conversion efficiency or a pulsed-pump protocol. By merging compact integration with wide frequency tunability, this platform offers a promising pathway toward scalable quantum networks.
The development of scalable quantum networks requires coherent interfaces capable of converting microwave photons used in superconducting quantum processors into optical photons suitable for long-distance fiber transmission. This review surveys recent progress in microwave-to-optical quantum transduction across optomechanical, electro-optic, and magneto-optic platforms, with emphasis on conversion efficiency, bandwidth, added noise, and operating temperature. In addition to standard metrics, we propose the internal efficiency eta_in and the magnon decay rate kappa_m/2pi as normalized parameters that enable fairer comparison across heterogeneous implementations. Optomechanical systems achieve internal phonon-to-photon efficiencies of 93% with sub-quantum added noise of 0.25 quanta at millikelvin temperatures. Electro-optic devices based on LiNbO3 and AlN have advanced from room-temperature efficiencies below 1% to millikelvin systems with internal efficiencies approaching 99.5%, added noise as low as 0.16 quanta at 60 mK, and bandwidths extending to several tens of megahertz. Magneto-optic (optomagnonic) platforms exhibit the lowest efficiencies (typically 10−10 to 10−8), but offer intrinsic non-reciprocity and broadband magnonic operation, with emerging approaches based on topological heterostructures and magnon squeezing predicting enhancements up to 10−4. Optomechanical systems appear promising for high-fidelity quantum state transfer, electro-optic transducers for high-bandwidth coherent links, and magneto-optic devices for non-reciprocal network components. We discuss the fundamental trade-off between efficiency and added noise across all three platforms, and argue that heterogeneous microwave-optical transduction is emerging as a key enabling technology for distributed quantum computing and large-scale quantum networks.
High-efficiency microwave-to-optical quantum transduction is crucial for quantum networks and distributed quantum computing. Cavity-based electro-optic transducers have been widely explored due to their cavity-enhanced conversion efficiency, albeit at the compromise of limited transduction bandwidth and strict frequency alignment requirements between microwave and optical modes. A recent advancement in meter-long superconducting electro-optic modulators (SEOM) has demonstrated conversion efficiency approaching that of the cavity-based transducers on a traveling-wave structure while maintaining a broad bandwidth of tens of gigahertz. This paper provides a further theoretical investigation into the dynamics of the microwave-to-optical conversion process in a traveling-wave geometry. Based on this analysis, we propose a traveling-wave electro-optic transducer design featuring near-unity conversion efficiency and tunable conversion frequency.
The successes of superconducting quantum circuits at local manipulation of quantum information and photonics technology at long-distance transmission of the same have spurred interest in the development of quantum transducers for efficient, low-noise, and bidirectional frequency conversion of photons between the microwave and optical domains. We propose to realize such functionality through the coupling of electrical, piezoelectric, and optomechanical resonators. The coupling of the mechanical subsystems enables formation of a resonant mechanical supermode that provides a mechanically mediated, efficient single interface to both the microwave and optical domains. The conversion process is analyzed by applying an equivalent circuit model that relates device-level parameters to overall figures of merit for conversion efficiency $\ensuremath{\eta}$ and added noise N. These can be further enhanced by proper impedance matching of the transducer to an input microwave transmission line. The performance of potential transducers is assessed through finite-element simulations, with a focus on geometries in GaAs, followed by considerations of the AlN, LiNbO3, and AlN-on-Si platforms. We present strategies for maximizing $\ensuremath{\eta}$ and minimizing N, and find that simultaneously achieving $\ensuremath{\eta}>50\mathrm{%}$ and N<0.5 should be possible with current technology. We find that the use of a mechanical supermode for mediating transduction is a key enabler for high-efficiency operation, particularly when paired with an appropriate microwave impedance-matching network. Our comprehensive analysis of the full transduction chain enables us to outline a development path for the realization of high-performance quantum transducers that will constitute a valuable resource for quantum information science.
The successes of superconducting quantum circuits at local manipulation of quantum information and photonics technology at long-distance transmission of the same have spurred interest in the development of quantum transducers for efficient, low-noise, and bidirectional frequency conversion of photons between the microwave and optical domains. We propose to realize such functionality through the coupling of electrical, piezoelectric, and optomechanical resonators. The coupling of the mechanical subsystems enables formation of a resonant mechanical supermode that provides a mechanically-mediated, efficient single interface to both the microwave and optical domains. The conversion process is analyzed by applying an equivalent circuit model that relates device-level parameters to overall figures of merit for conversion efficiency η and added noise N. These can be further enhanced by proper impedance matching of the transducer to an input microwave transmission line. The performance of potential transducers is assessed through finite-element simulations, with a focus on geometries in GaAs, followed by considerations of the AlN, LiNbO3, and AlN-on-Si platforms. We present strategies for maximizing η and minimizing N, and find that simultaneously achieving η>50% and N<0.5 should be possible with current technology. Our comprehensive analysis of the full transduction chain enables us to outline a development path for the realization of high-performance quantum transducers that will constitute a new resource for quantum information science.
Optical quantum networks provide a natural route for connecting distant superconducting quantum processors, enabling distributed quantum computation, sensing, and communication. Piezo-optomechanical transducers are among the leading candidates for scalable microwave-to-optical quantum interfaces. However, prior one-dimensional piezo-optomechanical transducers remain limited by optical-absorption-induced heating and the resulting thermal noise. Two-dimensional optomechanical crystals offer substantially improved thermalization from better thermal anchoring, but their structural complexity has so far hindered the realization of a fully integrated two-dimensional transducer. Here, we overcome this challenge with a new design strategy based on band structure engineering. We fabricate the devices and experimentally characterize the response, measuring an electromechanical damping rate of 4.6 kHz at room temperature and electromechanical coupling rate of 0.17 MHz by wire-bonding to a multi-mode microwave resonator at 10 mK. Bidirectional transduction is performed with a calibrated internal efficiency of 0.85\% in the continuous-wave operation, alongside pulsed photon-phonon pair generation near its quantum ground state. Our results represent a significant step toward high-efficiency and low-noise transducers for entangling remote superconducting qubits.
Superconducting circuits are important technological tools that have found various applications, notably hypothetical future superconducting quantum computers. Scaling such systems further is, however, proving challenging because of thermal heat load and space constraints in cryostats. One way of improving the scalability of such systems would be to resort to optical fibers for controlling the circuits in cryostats, as well as mediating long-distance interaction between them while preserving quantum coherence. Such a strategy relies on building a coherent interface between GHz frequencies and optical frequencies. This interface, referred to as "microwave-optical transducer", would need to exhibit high photon conversion efficiencies and very low added noise, ideally less than a quantum, in a cryogenic environment. Since the prospects of weaving networks of optically connected superconducting quantum processors have now attracted the attention of the scientific community for more than a decade, very efficient transducers have already been proposed and realized. However, despite their impressive performances against selected metrics, often equivalent to optimizing the on-chip conversion efficiency alone, none of the approaches pursued so far really solved the qubit interconnection problems in ways that could be applied to large-scale systems in the near future. The aim of this thesis was to develop transduction approaches that would ultimately enable optical driving of superconducting circuits and quantum state transfer between microwave and optical frequencies, while at the same time ensuring good scalability, both in terms of wafer manufacturability and integration in cryogenic environments. Integrated photonic circuits based on silicon nitride appeared as a promising platform, as silicon nitride is a CMOS-certified material, has a transparency window compatible with optical fibers and lacks two photon absorption. Realizing the coupling between microwave and optical frequencies in a way similar to what is done in optomechanics is desirable, because the field of optomechanics has seen the establishement of techniques that enable control of the low frequency degree of freedom at the quantum mechanical level, including ground state cooling, control of the susceptibility by dynamical backaction, quantum state transfer and entanglement. The heterogeneous integration of nonlinear crystalline thin films, such as lithium niobate and lithium tantalate, onto silicon nitride photonic circuitry endows it with an electro-optic activity that emulates the optomechanical interaction, while offering an inherent access to the microwave degree of freedom. However, material nonlinearities, including photorefraction, charge screening, and hysteresis, introduce complications that motivate exploring alternative approaches. Here, alongside an electro-optic implementation, a transducer that leverages the interaction of bulk acoustic resonances excited by micro-electromechanical systems with whispering-gallery-like modes of microresonators is presented. Coherent transduction between microwave and optical fields is demonstrated, and optomechanical dynamical backaction is observed. The transducers fast bandwidth, compatibility with multiplexing and ability to down-convert microwaves suggest interesting prospects, particularly upon further improvements of the optomechanical coupling.