Physical layer security (PLS) has emerged as a promising approach to ensure data confidentiality in next-generation wireless networks. As these networks transition toward 6G and beyond, two pivotal design considerations are sustainability—the ability to maintain secure communications under limited resources—and scalability—the capacity to accommodate a massive number of users and devices without compromising performance. In this paper, we explore four critical issues that can hamper the sustainable and scalable deployment of PLS: superfluous protection of non-sensitive data, non-uniform resource utilization, outages caused by limited channel information, and the rigidity of reliability–secrecy tradeoffs in finite blocklength scenarios. We propose solutions for each challenge, including schemes that protect only latent sensitive content, opportunistic scheduling of secret key generation during off-peak hours, correlation shaping to enable zero-outage secrecy even under slow fading, and neural-network-based coding to flexibly balance reliability and secrecy. Numerical and experimental results show that these approaches can significantly improve energy efficiency, resource utilization, and secrecy performance. Our findings pave the way for more sustainable and scalable PLS strategies in future large-scale wireless deployments.
Physical layer security (PLS) has emerged as a promising approach to ensure data confidentiality in next-generation wireless networks. As these networks transition toward 6G and beyond, two pivotal design considerations are sustainability—the ability to maintain secure communications under limited resources—and scalability—the capacity to accommodate a massive number of users and devices without compromising performance. In this paper, we explore four critical issues that can hamper the sustainable and scalable deployment of PLS: superfluous protection of non-sensitive data, non-uniform resource utilization, outages caused by limited channel information, and the rigidity of reliability–secrecy tradeoffs in finite blocklength scenarios. We propose solutions for each challenge, including schemes that protect only latent sensitive content, opportunistic scheduling of secret key generation during off-peak hours, correlation shaping to enable zero-outage secrecy even under slow fading, and neural-network-based coding to flexibly balance reliability and secrecy. Numerical and experimental results show that these approaches can significantly improve energy efficiency, resource utilization, and secrecy performance. Our findings pave the way for more sustainable and scalable PLS strategies in future large-scale wireless deployments.
Wireless networks have experienced rapid evolutions toward sustainability, scalability and interoperability. The digital economy is driven by future networked societies to a more holistic community of intelligent infrastructures and connected services for a more sustainable and smarter society. Furthermore, an enormous amount of sensitive and confidential information, e.g., medical records, electronic media, financial data, and customer files, is transmitted via wireless channels. The implementation of higher layer key distribution and management was challenged by the emergence of these new advanced systems. In order to resist various malicious abuses and security attacks, physical layer security (PLS) has become an appealing alternative. The basic concept behind PLS is to exploit the characteristics of wireless channels for the confidentiality. Its target is to blind the eavesdroppers such that they cannot extract any confidential information from the received signals. This thesis presents solutions and analyses to improve the PLS in wireless networks. \n \nIn the second chapter, we investigate the secrecy capacity performance of an amplify-andforward (AF) dual-hop network for both distributed beamforming (DBF) and opportunistic relaying (OR) techniques. We derive the capacity scaling for two large sets; trustworthy relays and untrustworthy aggressive relays cooperating together with a wire-tapper aiming to intercept the message. We show that the capacity scaling in the DBF is lower bounded by a value which depends on the ratio between the number of the trustworthy and the untrustworthy aggressive relays, whereas the capacity scaling of OR is upper bounded by a value depending on the number of relays as well as the signal to noise ratio (SNR). \n \nIn the third chapter, we propose a new location-based multicasting technique, for dual phase AF large networks, aiming to improve the security in the presence of non-colluding passive eavesdroppers. We analytically demonstrate that the proposed technique increases the security by decreasing the probability of re-choosing a sector that has eavesdroppers, for each transmission time. Moreover, we also show that the secrecy capacity scaling of our technique is the same as for broadcasting. Hereafter, the lower and upper bounds of the secrecy outage probability are calculated, and it is shown that the security performance is remarkably enhanced, compared to the conventional multicasting technique. \n \nIn the fourth chapter, we propose a new cooperative protocol, for dual phase amplify-andforward large wireless sensor networks, aiming to improve the transmission security while taking into account the limited capabilities of the sensor nodes. In such a network, a portion of the K relays can be potential passive eavesdroppers. To reduce the impact of these untrustworthy relays on the network security, we propose a new transmission protocol, where the source agrees to share with the destination a given channel state information (CSI) of source-trusted relay-destination link to encode the message. Then, the source will use this CSI again to map the right message to a certain sector while transmitting fake messages to the other sectors. Adopting such a security protocol is promising because of the availability of a high number of cheap electronic sensors with limited computational capabilities. For the proposed scheme, we derived the secrecy outage probability (SOP) and demonstrated that the probability of receiving the right encoded information by an untrustworthy relay is inversely proportional to the number of sectors. We also show that the aggressive behavior of cooperating untrusted relays is not effective compared to the case where each untrusted relay is trying to intercept the transmitted message individually. \n \nFifth and last, we investigate the physical layer security performance over Rayleigh fading channels in the presence of impulsive noise, as encountered, for instance, in smart grid environments. For this scheme, secrecy performance metrics were considered with and without destination assisted jamming at the eavesdropper’s side. From the obtained results, it is verified that the SOP, without destination assisted jamming, is flooring at high signal-to-noise-ratio values and that it can be significantly improved with the use of jamming.
Massive Multiple-Input Multiple-Output (MIMO) has become a crucial enabling technology for 5G and beyond, providing previously unheard-of increases in energy and spectrum efficiency. It is still difficult to guarantee secure communication in these systems, particularly when it comes to passive eavesdroppers whose base station is unaware of their channel state information. By taking advantage of the inherent randomness of wireless channels, Physical Layer Security (PLS) offers a promising paradigm; however, its efficacy in massive MIMO is heavily reliant on resource allocation and transmission strategies. In this work, the performance of secure transmission schemes, such as Maximum Ratio Transmission (MRT), Zero-Forcing (ZF), and Artificial Noise (AN)-aided beamforming, is examined when passive eavesdroppers are present. This work will use extensive Monte Carlo simulations to assess important performance metrics such as energy efficiency, secrecy outage probability, and secrecy sum rate under different system parameters (e.g., number of antennas, Signal-to-Noise Ratio (SNR), power allocation). The results aim to provide comparative insight into the strengths and limitations of different PLS strategies and to highlight open research directions to design scalable, energy-efficient, and robust secure transmission techniques in future 6G networks.
Abstract Due to the open nature of wireless communication systems, the data transmission over these networks are vulnerable to malicious attack. To safeguard the transmitted data, physical layer security (PLS) has been emerged as a promising technique because of its unique feature of utilizing randomness of the wireless channel to secure the information. The preeminent idea of utilizing the channel imperfections such as fading and noise into the security providing resource is the basic approach behind PLS. For exploiting the randomness of the propagation medium, the analysis of the secrecy performance over the fading channel is of utmost importance. With the explanation of basic theory and technology, this paper presents an elaborated survey on the PLS research over the fading channels. To exploit the performance gains, we discuss the optimization approaches in different network design problems, for example, secrecy rate maximization, power minimization, and secure energy efficiency problems. We present a comparative study of the expressions of various performance metrics of the PLS along with classification depending upon the channel state information of the eavesdropper. The application and challenges of the PLS in the emerging wireless technologies are also reviewed and discussed. This paper incorporates almost all the aspects of PLS implemented over the fading channels. Furthermore, the paper is concluded with open research directions for the PLS system in various fields that can be explored to design a flexible and robust security system to satisfy the security requirements of the next‐generation networks.
Physical layer security is emerging as a promising means of ensuring secrecy in wireless communications. The key idea is to exploit the characteristics of wireless channels such as fading or noise to transmit a message from the source to the intended receiver while keeping this message confidential from eavesdroppers. Topics covered in Trusted Communications with Physical Layer Security for 5G and Beyond include secrecy metrics for physical layer security over fading channels; trusted wireless communications with spatial multiplexing; directional modulation enabled physical layer wireless security; secure waveform for 5G systems; confidential and energy efficient communications using physical layer security; secure data networks with channel uncertainty; antenna selection strategies for wiretap channels; physical layer security for massive MIMO systems, millimeter wave cellular networks, non-orthogonal multiple access, multiuser relay networks, cognitive radio networks, MIMOME-OFDM systems; wirelessly powered communication systems and D2D-enabled cellular networks; and security solutions and applications at the physical layer, including case studies of secret key generation and secrecy coding in communication nodes and terminals.
The pervasiveness of commercial Internet of Things (IoT) around the globe is expected to reach significant levels with the upcoming sixth generation of mobile networks (6G). Throughout the past years, wireless standardization units worldwide have been prominently active in the deployment and performance optimization of such IoT networks and fusing them with current and futuristic cellular networks. Nonetheless, the openness of wireless transmissions and the forecasted overwhelm in connected devices will provoke unprecedented security leakages and vulnerabilities. In addition to the key targets of the 6G and IoT, it has been of paramount importance to cater to decent and lightweight security mechanisms in ultra-massively connected heterogeneous networks. Recently, significant efforts have been made to pave the way for the integration of physical layer security (PLS) in contemporary and futuristic networks. The primary motivation behind its deployment resides in its low complexity and ability to provide information-theoretic secure transmissions, which alleviates the complexity burden caused by implementing complex cryptographic schemes. This survey overviews the recent advancement in PLS techniques with a particular interest in its application to the Internet of Things (IoT). We review essentially recent PLS techniques aiming at ensuring message confidentiality along with node/message authentication and malicious nodes’ detection, where their corresponding application scenarios and underlying pros and cons are discussed. On top of that, we explore recent findings in the incorporation of cutting-edge technologies at the physical layer, such as non-orthogonal multiple-access, reconfigurable intelligent surfaces, joint communication and sensing, and optical wireless/Terahertz communications in boosting confidentiality and authentication at the physical layer. Lastly, promising extensions and future directions are discussed based on the quantified pros and cons of each PLS category, opening up ways for timely research directions within the topic and current/future challenges faced by PLS.
Novel security primitives built on physical layer parameters gain interest for the design of the wireless 6G networks. Regarding key value indicators (KVI), the requirements for future 6G wireless networks are formulated. We select a subset of these KVIs, including safety, anonymity, scalability, sustainability, reliability, and resilience. First, the KVIs are defined. Next, we identify and review suitable physical layer security techniques, including selected results. They contain a coding theorem for arbitrarily varying wiretap channels with an informed jammer. Results on practical secret key generation are reviewed. Confidential stealth, and covert communications are included as well as certain differential privacy techniques. The zero-outage secrecy rate and ergodic secrecy rate maximization are briefly described, too. Finally, multi-mode fiber transmission, multiple-input multiple-output multiple-eavesdropper wiretap channels, and reconfigurable intelligent surfaces are listed. We argue that these results and physical layer security techniques enable the envisaged KVIs. Finally, open gaps for future research are motivated and discussed.