Physical Layer Security for Authentication, Confidentiality, and Malicious Node Detection: A Paradigm Shift in Securing IoT Networks
Elmehdi Illi, Marwa Qaraqe, Saud Althunibat, Abdullah I. Alhasanat, Moath H. Alsafasfeh, Marcus de Ree, Γεώργιος Μαντάς, Jonathan Rodrı́guez, Waqas Aman, Saif M. Al-Kuwari
The pervasiveness of commercial Internet of Things (IoT) around the globe is expected to reach significant levels with the upcoming sixth generation of mobile networks (6G). Throughout the past years, wireless standardization units worldwide have been prominently active in the deployment and performance optimization of such IoT networks and fusing them with current and futuristic cellular networks. Nonetheless, the openness of wireless transmissions and the forecasted overwhelm in connected devices will provoke unprecedented security leakages and vulnerabilities. In addition to the key targets of the 6G and IoT, it has been of paramount importance to cater to decent and lightweight security mechanisms in ultra-massively connected heterogeneous networks. Recently, significant efforts have been made to pave the way for the integration of physical layer security (PLS) in contemporary and futuristic networks. The primary motivation behind its deployment resides in its low complexity and ability to provide information-theoretic secure transmissions, which alleviates the complexity burden caused by implementing complex cryptographic schemes. This survey overviews the recent advancement in PLS techniques with a particular interest in its application to the Internet of Things (IoT). We review essentially recent PLS techniques aiming at ensuring message confidentiality along with node/message authentication and malicious nodes’ detection, where their corresponding application scenarios and underlying pros and cons are discussed. On top of that, we explore recent findings in the incorporation of cutting-edge technologies at the physical layer, such as non-orthogonal multiple-access, reconfigurable intelligent surfaces, joint communication and sensing, and optical wireless/Terahertz communications in boosting confidentiality and authentication at the physical layer. Lastly, promising extensions and future directions are discussed based on the quantified pros and cons of each PLS category, opening up ways for timely research directions within the topic and current/future challenges faced by PLS.
The pervasiveness of commercial Internet of Things (IoT) around the globe is expected to reach significant levels with the upcoming sixth generation of mobile networks (6G). Throughout the past years, wireless standardization units worldwide have been prominently active in the deployment and performance optimization of such IoT networks and fusing them with current and futuristic cellular networks. Nonetheless, the openness of wireless transmissions and the forecasted overwhelm in connected devices will provoke unprecedented security leakages and vulnerabilities. In addition to the key targets of the 6G and IoT, it has been of paramount importance to cater to decent and lightweight security mechanisms in ultra-massively connected heterogeneous networks. Recently, significant efforts have been made to pave the way for the integration of physical layer security (PLS) in contemporary and futuristic networks. The primary motivation behind its deployment resides in its low complexity and ability to provide information-theoretic secure transmissions, which alleviates the complexity burden caused by implementing complex cryptographic schemes. This survey overviews the recent advancement in PLS techniques with a particular interest in its application to the Internet of Things (IoT). We review essentially recent PLS techniques aiming at ensuring message confidentiality along with node/message authentication and malicious nodes’ detection, where their corresponding application scenarios and underlying pros and cons are discussed. On top of that, we explore recent findings in the incorporation of cutting-edge technologies at the physical layer, such as non-orthogonal multiple-access, reconfigurable intelligent surfaces, joint communication and sensing, and optical wireless/Terahertz communications in boosting confidentiality and authentication at the physical layer. Lastly, promising extensions and future directions are discussed based on the quantified pros and cons of each PLS category, opening up ways for timely research directions within the topic and current/future challenges faced by PLS.
The increasing demands for Internet of things (IoT) applications and the tremendous increase in the volume of IoT generated data bring novel challenges for the fifth generation (5G) network. Verticals such as e-Health, vehicle to everything (V2X) and unmanned aerial vehicles (UAVs) require solutions that can guarantee low latency, energy efficiency,massive connectivity, and high reliability. In particular, finding strong security mechanisms that satisfy the above is of central importance for bringing the IoT to life. \nIn this regards, employing physical layer security (PLS) methods could be greatly beneficial for IoT networks. While current security solutions rely on computational complexity, PLS is based on information theoretic proofs. By removing the need for computational power, PLS is ideally suited for resource constrained devices. In detail, PLS can ensure security using the inherit randomness already present in the physical channel. Promising schemes from the physical layer include physical unclonable functions (PUFs), which are seen as the hardware fingerprint of a device, and secret key generation (SKG) from wireless fading coefficients, which provide the wireless fingerprint of the communication channel between devices. \nThe present thesis develops several PLS-based techniques that pave the way for a new breed of latency-aware, lightweight, security protocols. In particular, the work proposes: i) a fast multi-factor authentication solution with verified security properties based on PUFs, proximity detection and SKG; ii) an authenticated encryption SKG approach that interweaves data transmission and key generation; and, iii) a set of countermeasures to man-in-the-middle and jamming attacks. Overall, PLS solutions show promising performance, especially in the context of IoT applications, therefore, the advances in this thesis should be considered for beyond-5G networks.
With the uninterrupted revolution of communications technologies and the great-leap-forward development of emerging applications, the ubiquitous deployment of Internet of Things (IoT) is imperative to accommodate constantly growing user demands and market scales. Communication security is critically important for the operations of IoT. Among the communication security provisioning techniques, physical layer security (PLS), which can provide unbreakable, provable, and quantifiable secrecy from an information-theoretical point of view, has drawn considerable attention from both the academia and the industries. However, the unique features of IoT, such as low-cost, wide-range coverage, massive connection, and diversified services, impose great challenges for the PLS protocol design in IoT. In this article, we present a comprehensive review of the PLS techniques toward IoT applications. The basic principle of PLS is first briefly introduced, followed by the survey of the existing PLS techniques. Afterwards, the characteristics of IoT are identified, based on which the challenges faced by PLS protocol design are summarized. Then, three newly-proposed PLS solutions are highlighted, which match the features of IoT well and are expected to be applied in the near future. Finally, we conclude the paper and point out some further research directions.
The security of the Internet of Things (IoT) is receiving considerable interest as the low power constraints and complexity features of many IoT devices are limiting the use of conventional cryptographic techniques. This article provides an overview of recent research efforts on alternative approaches for securing IoT wireless communications at the physical layer, specifically the key topics of key generation and physical layer encryption. These schemes can be implemented and are lightweight, and thus offer practical solutions for providing effective IoT wireless security. Future research to make IoT-based physical layer security more robust and pervasive is also covered.
In this chapter, the physical layer security (PLS) is interrogated for Internet of things (IoT) networks. As a result of their nature, IoT networks consist of a massive number of devices. These devices are produced in compact sizes and powered with small batteries rather than a grid network. Thus, they are able to have high portability but have low computational capability. Because of these features of IoT devices, the conventional encryption/decryption-based cryptographic security methods used in the classical wireless devices fail to satisfy the security requirements of IoT networks. The main reason for this is that the requirements of these security methods are too demanding for the processing power of IoT devices and stringent to manage when these devices are deployed in a massive number. Therefore, in this chapter, the possible advantages of the PLS in IoT networks are explained. In this manner, the IoT architecture is explained and common attack types in IoT networks are reviewed. Then, the unique features of IoT networks from the PLS perspective are presented along with the possible challenges on the way. A literature review is conducted to propound the current PLS techniques used in IoT networks and the future directions are signified. As a result of this chapter, it is expected that PLS techniques in IoT networks are clarified to the reader and their future applications are encouraged.
The open nature of radio propagation enables ubiquitous wireless communication. This allows for seamless data transmission. However, unauthorized users may pose a threat to the security of the data being transmitted to authorized users. This gives rise to network vulnerabilities such as hacking, eavesdropping, and jamming of the transmitted information. Physical layer security (PLS) has been identified as one of the promising security approaches to safeguard the transmission from eavesdroppers in a wireless network. It is an alternative to the computationally demanding and complex cryptographic algorithms and techniques. PLS has continually received exponential research interest owing to the possibility of exploiting the characteristics of the wireless channel. One of the main characteristics includes the random nature of the transmission channel. The aforesaid nature makes it possible for confidential and authentic signal transmission between the sender and the receiver in the physical layer. We start by introducing the basic theories of PLS, including the wiretap channel, information-theoretic security, and a brief discussion of the cryptography security technique. Furthermore, an overview of multiple-input multiple-output (MIMO) communication is provided. The main focus of our review is based on the existing key-less PLS optimization techniques, their limitations, and challenges. The paper also looks into the promising key research areas in addressing these shortfalls. Lastly, a comprehensive overview of some of the recent PLS research in 5G and 6G technologies of wireless communication networks is provided.
Physical layer security (PLS) has become the kernel concept for ensuring wireless network security. The main goal of this treatise is to provide a systematic classification of key less schemes. We have classified key less PLS into code, channel adaptation and artificial noise (AN) based approaches and carried out a survey of the diverse schemes employed in literature for key less approach. Further, we have provided the advantages, observations and future directions for each of the techniques. Industry 4.0 revolution with the Internet of Things (IoT) is going to rule the next wireless era with its promising smart home, smart health care, smart retail to name a few. Therefore, we have provided a discussion on the application of key less PLS in IoT. Further, we also discuss about two emerging areas that can be employed for enhancing PLS such as Intelligent Reflecting Surface (IRS) and Artificial Intelligence (AI). We have also provided some of the existing security challenges in the IoT application scenario. We have also presented the open research challenges and future directions in the area of key less PLS.