The development of quantum computing is progressing rapidly, but there are still important technological and scaling challenges to overcome to reach the expected potential. Generally speaking, one of the main challenges of scaling quantum computers arises from the delicacy of the quantum states. For example, the fact that superconducting-based quantum processors need to be connected to the ambient environment with high-speed (microwave regime) signals, brings in scaling limitations related to the ability of preserving very low operation temperatures [1]. An important step in overcoming this challenge would be replacing traditional microwave connectors between the outside environment and the mK-range processors with optical fibers. This would simultaneously increase the bandwidth available and drastically reduce the thermal load due to heating by minimizing the number of thermal bridges to outside environment [2]. Another intermediate solution is to interface quantum processes with a superconducting processor based on single flux quantum (SFQ) technology, operating at more relaxed cryogenic conditions (4 K instead of mK range) [3]. Such hybrid solution would also need to have bidirectional communication links to external environments, and an optical link exploiting efficient light sources operating at cryogenic temperatures appears to be instrumental to it.
The development of quantum computing is progressing rapidly, but there are still important technological and scaling challenges to overcome to reach the expected potential. Generally speaking, one of the main challenges of scaling quantum computers arises from the delicacy of the quantum states. For example, the fact that superconducting-based quantum processors need to be connected to the ambient environment with high-speed (microwave regime) signals, brings in scaling limitations related to the ability of preserving very low operation temperatures [1]. An important step in overcoming this challenge would be replacing traditional microwave connectors between the outside environment and the mK-range processors with optical fibers. This would simultaneously increase the bandwidth available and drastically reduce the thermal load due to heating by minimizing the number of thermal bridges to outside environment [2]. Another intermediate solution is to interface quantum processes with a superconducting processor based on single flux quantum (SFQ) technology, operating at more relaxed cryogenic conditions (4 K instead of mK range) [3]. Such hybrid solution would also need to have bidirectional communication links to external environments, and an optical link exploiting efficient light sources operating at cryogenic temperatures appears to be instrumental to it.
Quantum computing promises an exponential speed-up of computation compared to what is nowadays achievable with classical computers. In this way, it enables the evaluation of more complex models and the breaching of current security algorithms. For the operation of a quantum system, many questions remain to be answered. Currently, there are several quantum technologies that promise to be both reliable and scalable, two features required for large scale quantum operations. Common to all technologies is the operating temperature that needs to be close to absolute zero, i.e. below 100 mK, to suppress environment noise and allow the quantum properties to become 'visible'. In order for any quantum processor to be operated, a so-called quantum-classical interface is required for the quantum bit (qubit) read-out and control. This interface consists of various electronic blocks, such as analog-to-digital converters, digital-to-analog converters, mixers, amplifiers and a digital controller. Especially the analog blocks require effort to meet the noise and stability constraints as not to disturb the very sensitive qubits and allow reading of the tiny signals. As the qubits live in extremely deep-cryogenic temperatures, long wires interface the cryogenic with the room temperature environment, where most of the electronics is situated. However, for a scalable system, heat injection becomes a serious problem, with many wires between 300 K and sub-Kelvin. Furthermore, such amount of interconnects is challenging to mechanically place in a dilution refrigerator. Therefore, in this work, we propose to implement the electronics not at room temperature, but at a temperature much closer to the qubits, for example at 4 K. This not only reduces significantly the wiring between room temperature and the qubits, but we can also benefit from lower electronic noise at such a temperature. The operation of conventional electronics almost 200°C below its normal temperature range is not trivial as device properties alter significantly and most circuits no longer operate as intended. In CMOS processes, the main technology in the integrated electronics world, the behaviour of the transistors, required for the implementation of any circuit, deviates considerably at low temperatures. The transistor's threshold voltage goes up, the mobility increases and the subthreshold slope becomes steeper, to name just a few of these deviations. Although there are improvements in performance, there are also some counter effects, and characterization of the transistors is needed to observe the changes. Once devices are characterized at such low temperatures, new models can be built and circuits can be simulated and adapted to operate properly at cryogenic temperatures. Luckily, there are various commercially available devices that can already withstand the chills of cold. We demonstrated various commercially available devices, such as a field-programmable gate array (FPGA) implemented in a 28 nm CMOS process, to be operating without major concerns at 4~K. Its properties alter only slightly, within 5 to 10%, and all tested circuit implementations, working at 300~K, also worked at 4 K. We combined both commercially available devices, that operate 200 K below their specified temperature range, with custom designed CMOS circuits to implement a cryogenic read-out platform for spin qubits. This system comprises amplifiers, an ADC, an FPGA, voltage regulators and a clock generator. It allows to amplify the tiny signal from the qubits and digitize it directly in the FPGA in order to process the data locally at 4~K. This system is one of the first systematic attempts at operating a part of the quantum-classical interface at cryogenic temperatures and forms the basis for future systems comprising the complete electronic interface for qubits to operate at such low temperatures. One of the main problems to tackle for cryogenic electronic systems is their power consumption. Power budgets are simply limited to roughly 1 or 2 Watts at 4 K and exponentially lower at deeper cryogenic temperatures, thus limiting the size of large-scale electronic systems. Our approach of combined commercial and custom circuits will have to be steadily replaced by a single (custom) technology that meets both power and scalability constraints. One of the best candidates is CMOS, a technology that the industry has relied upon for several decades and benefits from many optimizations thanks to Moore's law.
"Can we do this with a new type of computer - a quantum computer?". This famous quotation of the brilliant Richard Feynman within a conference talk on "Simulating physics with computers.” is often reverently praised as the origin of the field of quantum computing. The idea was to use quantum mechanical systems itself to simulate "Nature", which is inherently quantum mechanical. Now, 43 years later, the theoretical framework of how such a computer can operate has been developed. Two main important concepts for a potential quantum supremacy, superposition and entanglement, have been exploited to design quantum algorithms to significantly speed up certain tasks. Yet, the specific hardware implementation is still far from being certain, in fact the race between the most promising platforms such as superconducting qubits, bosonic codes, cold atoms, trapped ions, optical computing as well as spin qubits has recently intensified. If one also includes the most mature applications of quantum communication technologies, secure quantum key distribution and quantum random number generators, as part of a quantum information technology ecosystem, we are confronted with a plethora of different materials, concepts, and also operation frequencies. While superconducting qubits, bosonic codes and spin qubits work in the regime of approximately 5 GHz and are controlled by electrical fields, trapped ions, cold atoms, and optical quantum computing operate with light in the infrared or visible range. Consequently, a quantum frequency converter or microwave-optic transducer is required to interface the different frequency domains or establish a long-range network connection with suitable telecom fibers. In fact, the combination of different frequency regimes is also an essential part in our classical modern communication network, where computations are performed in electrical circuits and the information exchange over longer distances happens via optical fibers. However, the specific challenges specific to building a quantum computer, also apply to the development of such a quantum frequency transducer: 1) As we deal with single excitations as the carrier of information, i.e. the smallest possible quantity, the signal can easily be corrupted by other noise sources which needs to be avoided by all means. This is also the reason why microwave quantum computers operate at temperature environments close to zero temperature (< 0.1 Kelvin) to avoid corruption by thermal noise. 2) The frequency interface generally needs to preserve the phase of the signal as an essential part of the quantum state. And 3) Quantum signals cannot be copied which would be a typical strategy to account for errors in classical computers. And finally, there is a challenge specific to microwave-optic transducers: While quantum computers are operating in one specific frequency domain, microwave-optic transducers combine microwave and optical fields in one device. This results in the particular challenge that high-energy optical radiation, which is usually well-shielded from superconducting microwave quantum processors, are now an essential part of the device. The concomitant optical radiation in the operating transducer will inevitably have a detrimental effect on the superconducting microwave components. Together with the requirement of minimal background noise for quantum-limited operation as described above, v heating from the absorption of optical photons within the same device where single microwave excitations are processed forms a formidable challenge. This thesis aims to address this challenge by developing microwave-optic transducers where the impact of optical absorption on superconducting circuits in general and superconducting qubits specifically can be mitigated. In our first approach, we developed a compact device with optimized interaction strengths between the different frequency domains. This minimizes the optical powers used for transducer operation and thus the optical absorption heating. This work was - to the best of our knowledge - the first comprehensive noise study, in an integrated microwave-optic transducer. Unfortunately, we saw that the optical absorption heating added noise way above a single excitation. Consequently, a potential quantum signal would have been buried in the noise, added by the transduction. Building on this insight, we utilized a three-dimensional microwave-optic transducer instead of an integrated device. The larger heat capacity of the macroscopic device with a size of a few millimeters can absorb a larger fraction of the optical heating before it increases the temperature of the device. This allowed us to interface the transducer directly with a superconducting qubit to readout the qubit state in a novel all-optical manner. We showed that the microwave-optic transducer can be operated in a regime in which optical fields don’t harm the sensitive qubit. This is an important prerequisite for the operation of microwave-optic transducers in conjunction with microwave quantum processors and brings the integration and seamless orchestration of different frequency components in a quantum network a step closer.
Today's hundred-qubit quantum computers require a dramatic scale up to millions of qubits to become practical for solving real-world problems. Although a variety of qubit technologies have been demonstrated, scalability remains a major hurdle. Superconducting (SC) qubits are one of the most mature and promising technologies to overcome this challenge. However, these qubits reside in a millikelvin cryogenic dilution fridge, isolating them from thermal and electrical noise. They are controlled by a rack-full of external electronics through extremely complex wiring and cables. Although thousands of qubits can be fabricated on a single chip and cooled down to millikelvin temperatures, scaling up the control and readout electronics remains an elusive goal. This is mainly due to the limited available cooling power in cryogenic systems constraining the wiring capacity and cabling heat load management. In this article, we focus on scaling up the number of XY-control lines by using cryogenic RF-photonic links. This is one of the major roadblocks to build a thousand qubit superconducting QC. We will first review and study the challenges of state-of-the-art proposed approaches, including cryogenic CMOS and deep-cryogenic photonic methods, to scale up the control interface for SC qubit systems. We will discuss their limitations due to the active power dissipation and passive heat leakage in detail. By analytically modeling the noise sources and thermal budget limits, we will show that our solution can achieve a scale up to a thousand of qubits. Our proposed method can be seamlessly implemented using advanced silicon photonic processes, and the number of required optical fibers can be further reduced by using wavelength division multiplexing (WDM).
Quantum processors have the potential to revolutionize computing on a scale unseen since the development of semiconductor technology in the middle of the twentieth century. However, while there is now huge activity and investment in the field, there are a number of challenges that must be overcome before the technology can be fully realized. Of primary concern is the development of the classical technology required to interface with quantum systems, as we push toward a new era of high-performance, large-scale quantum computing. In this review, we briefly discuss some of the main challenges facing the development of universally useful quantum computers and the different architectures being investigated. We are primarily concerned with cryogenic quantum systems. These systems are among the most mature quantum computing architectures to date and are garnering a lot of both industrial and academic attention. We present and analyze the leading methods of interfacing with quantum processors, both now and for the next generation of larger, multi-qubit systems. Recent advancements in control cryoelectronics, both semiconducting and superconducting, are covered, while a view toward newer methods such as optical and wireless qubit interfaces is also presented.
Quantum computers have gained widespread interest as they can potentially solve problems that are intractable even for today’s supercomputers, such as the simulation of quantum systems as initially proposed by Feynman. To achieve such tremendous progress, a quantum computer relies on processing the information stored in quantum bits (qubits), the fundamental units of quantum computation, similar to the bits in a classical (i.e., non-quantum) processor. In general, a quantum processor comprising several qubits is connected through a quantum-to-classical interface consisting of classical electrical circuits for manipulating and reading out their quantum state. The accuracy of an operation on a qubit is characterized using the fidelity, which is 100 % in case of a perfect operation. In practice, a fidelity between 99 % and 99.9 % is typically achieved in today’s experiments with less than 100 qubits, limited by non-idealities in the control signals and by the implementation of the physical qubit itself. Since such qubit fidelities are too low to execute relevant quantum algorithms, quantum error correction schemes have been developed which rely on a much larger number of qubits to correct for possible errors, resulting in the need for quantum processors with thousands or millions of qubits. Solid-state qubits promise the largescale integration required to scale to millions of qubits, as they exploit the lithographic fabrication techniques borrowed from the semiconductor industry. However, state-of-theart solid-state qubits, such as transmons and single-electron spin qubits, must be typically cooled to cryogenic temperatures in a dilution refrigerator to exhibit quantum behavior. Because of the limited number of qubits (< 100) in state-of-theart solid-state quantum processors, the classical controller is currently implemented by general-purpose instruments or by tailor-made controllers operating at room temperature connected via several wires to the qubits in the cryogenic chamber. However, these systems must scale to support millions of qubits. While scaling up the underlying quantum processor is already exceptionally challenging, building the electronics required to interface such a large-scale processor is just as relevant and arduous.
In recent years, standard CMOS microprocessors have approached their maximum power dissipation per unit area, effectively placing a limit on computational power. This highlights the urgent need to explore alternative technologies. One promising avenue is the use of superconductors, which demonstrate zero resistivity below a critical temperature. However, circuits based on superconductors necessitate the use of cryostats to maintain low temperatures, presenting challenges in data transfer with the room temperature environment. While coaxial cables are often employed for this purpose, they suffer from limited data transfer rates and contribute significantly to heat load. On the contrary, photonics integrated circuits (PICs) coupled with optical fibers present a viable solution. They enable scalable, cost-effective, and power-efficient optical interconnections capable of supporting high data transfer rates while minimizing heat transfer. In this presentation, We will discuss the latest advancements in cryogenic PICs, focusing on their application in interfacing with cryogenic computing systems such as single-flux-quantum logic circuits and superconducting qubits.