Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE/LEOS Summer Topical Meetings

Design and Simulation of Superconducting Nanowire Single-Photon Detectors Integrated with Photonic Crystal Waveguides on GaAs Substrates

Aadit Sharma, Lan Hoang, Erika M. Sommer, Arafat A. Kazi, Joshya S. Rajagopal, John N. Nogan, Tzu‐Ming Lu, Matthew F. Doty, Marek Osiński

Published Jul 21, 2025• 1 citation
Publisher

Abstract

We report the design of and progress towards devices that integrate NbTiN superconducting nanowire singlephoton detectors with GaAs nanophotonic devices. We show that the design is expected to achieve photon detection efficiency of 99.41% power absorption in a $10-\mu \mathrm{m}$-long nanowire with minimized external coupling losses.

DOI
10.1109/sum65312.2025.11121804

Related papers

Waveguide integrated superconducting single-photon detectors

Simone Ferrari, Andreas Vetter, Patrik Rath +1 more

Near-field coupling to nanophotonic waveguides enables absorption engineering of superconducting nanowires for efficient single photon detection on chip. The direct compatibility with photonic circuitry allows for using such devices in the framework of integrated optics and thus for exploiting the rich toolbox of nanophotonics for device characterization and optimization. We integrate superconducting single photon detectors with photonic circuitry made from different transparent materials. Both single and multi-photon capability can be achieved through variation of the nanowire width, as well as ultra-fast single photon counting with high detection rates by reducing the nanowire length.

International Conference on Transparent Optical Networks•Jul 1, 2016•0 citations

Ultrafast single photon detectors (Conference Presentation)

Wolfram H. P. Pernice, Simone Ferrari

Nanophotonic integrated circuits are emerging as a promising platform for quantum photonics. A key building block are waveguide integrated detectors with superior performance. Detectors based on superconductor nanowires (SNSPDs) attached to optical waveguides have been shown to provide high efficiency and good timing performance, as well as broad bandwidth. To move towards applications in high bandwidth quantum communication and processing, ultrafast single-photon detectors with high efficiency are needed. The speed of meander type SNSPDs is limited because the required high absorption efficiency necessitates long nanowires deposited on top of the waveguide. This enhances the kinetic inductance and makes the detectors slow. We overcome this problem by aligning the nanowire perpendicular to the waveguide to realize devices with a length below 1 µm. By integrating the nanowire into a photonic crystal cavity, we recover high absorption efficiency, thus enhancing the detection efficiency by more than an order of magnitude. Our cavity enhanced superconducting nanowire detectors are fully embedded in silicon nanophotonic circuits and efficiently detect single photons at telecom wavelengths. The detectors possess sub-nanosecond decay (~ 120 ps) and recovery times (~ 510 ps), and thus show potential for GHz count rates at low timing jitter (~ 32 ps).

Optical Sensing, Imaging, and Photon Counting: From X-Rays to THz•Oct 11, 2017•0 citations

Waveguide Nanowire Superconducting Single-Photon Detectors Fabricated on GaAs and the Study of Their Optical Properties

Dondu Sahin, Alessandro Gaggero, J. W. Weber +9 more

Quantum photonic integration is one of the leading approaches for enabling the implementation of quantum simulation and computing at the scale of tens to hundreds of photons. Quantum photonic integrated circuits require the monolithic integration of single-photon sources and passive circuit elements, such as waveguides and couplers, with single-photon detectors. A promising approach for on-chip single-photon detection is the use of superconducting nanowires on top of semiconductor waveguides. Here, we present state-of-the-art NbN films on GaAs for the realization of waveguide superconducting single-photon detectors, suitable for integration with sources and linear optical circuits. Based on the measured optical properties, we propose a new design which allows high absorptance for short nanowires in order to increase the integration density in a quantum photonic chip. Finally, we review recent results on integrated single-photon and photon-number-resolving detectors, and integrated autocorrelators.

IEEE Journal of Selected Topics in Quantum Electronics•Sep 19, 2014•31 citations

Cavity-Enhanced and Ultrafast Superconducting Single-Photon Detectors

Andreas Vetter, Simone Ferrari, Patrik Rath +8 more

Ultrafast single-photon detectors with high efficiency are of utmost importance for many applications in the context of integrated quantum photonic circuits. Detectors based on superconductor nanowires attached to optical waveguides are particularly appealing for this purpose. However, their speed is limited because the required high absorption efficiency necessitates long nanowires deposited on top of the waveguide. This enhances the kinetic inductance and makes the detectors slow. Here, we solve this problem by aligning the nanowire, contrary to usual choice, perpendicular to the waveguide to realize devices with a length below 1 μm. By integrating the nanowire into a photonic crystal cavity, we recover high absorption efficiency, thus enhancing the detection efficiency by more than an order of magnitude. Our cavity enhanced superconducting nanowire detectors are fully embedded in silicon nanophotonic circuits and efficiently detect single photons at telecom wavelengths. The detectors possess subnanosecond decay (∼120 ps) and recovery times (∼510 ps) and thus show potential for GHz count rates at low timing jitter (∼32 ps). The small absorption volume allows efficient threshold multiphoton detection.

Nano Letters•Oct 19, 2016•107 citations

Broadband waveguide-integrated superconducting single-photon detectors with high system detection efficiency

Martin A. Wolff, Fabian Beutel, Jonas Schütte +4 more

Fast and efficient detection of single photons with high timing accuracy is a crucial requirement in most quantum optics experiments and enables novel sensing and imaging solutions. Superconducting nanowire single-photon detectors (SNSPD) achieve technology-leading performance in terms of detection efficiency, dark count rate, timing jitter, and detector dead times. However, conventional SNSPDs with high system detection efficiency typically rely on resonant enhancement of the absorption efficiency, thus only achieving attractive detector benchmarks over narrow spectral windows. Waveguide-integrated SNSPDs allow for leveraging the wideband material absorption in superconducting nanowires by absorbing light in a traveling-wave geometry but have been limited to low system detection efficiencies due to interface losses when coupling to optical fibers. Here, we show how high system detection efficiencies of 22%–73% are realized over a broad wavelength range from 532 nm to 1640 nm in a single waveguide-integrated SNSPD device. We accomplish efficient coupling between optical fibers and waveguide-integrated nanowire detectors by employing a 3D interface, produced in direct laser writing, that relies on total internal reflection for achieving a broad transmission bandwidth. We further find low timing jitter of 25.7 ps and detector decay times of 9.8 ns, allowing for single-photon counting with high repetition rates up to 100 MHz. Our work paves the way for an efficient single-photon detector solution that combines the spectral requirements of an extremely wide range of quantum optics experiments in a single device. The coupling approach and SNSPD-integration with nanophotonic circuits are further well-suited for realizing large-scale detector arrays.

Applied Physics Letters•Apr 12, 2021•43 citations

Design of broadband high-efficiency superconducting-nanowire single photon detectors

Luca Redaelli, Gabriele Bulgarini, Sergiy M. Dobrovolskiy +4 more

Abstract In this paper several designs to maximize the absorption efficiency of superconducting-nanowire single-photon detectors are investigated. Using a simple optical cavity consisting of a gold mirror and a SiO 2 layer, the absorption efficiency can be boosted to over 97%: this result is confirmed experimentally by the realization of an NbTiN-based detector having an overall system detection efficiency of 85% at 1.31 μ m. Calculations show that by sandwiching the nanowire between two dielectric Bragg reflectors, unity absorption (>99.9%) could be reached at the peak wavelength for optimized structures. To achieve broadband high efficiency, a different approach is considered: a waveguide-coupled detector. The calculations performed in this work show that, by correctly dimensioning the waveguide and the nanowire, polarization-insensitive detectors absorbing more than 95% of the injected photons over a wavelength range of several hundred nm can be designed. We propose a detector design making use of GaN/AlN waveguides, since these materials allow lattice-matched epitaxial deposition of Nb(Ti)N films and are transparent on a very wide wavelength range.

arXiv:1602.06846•Superconductor Science and Technology•May 6, 2016•50 citations
We report the design of and progress towards devices that integrate NbTiN superconducting nanowire singlephoton detectors with GaAs nanophotonic devices. We show that the design is expected to achieve photon detection efficiency of 99.41% power absorption in a 10−μm10-\mu \mathrm{m}10−μm-long nanowire with minimized external coupling losses.
Near-field coupling to nanophotonic waveguides enables absorption engineering of superconducting nanowires for efficient single photon detection on chip. The direct compatibility with photonic circuitry allows for using such devices in the framework of integrated optics and thus for exploiting the rich toolbox of nanophotonics for device characterization and optimization. We integrate superconducting single photon detectors with photonic circuitry made from different transparent materials. Both single and multi-photon capability can be achieved through variation of the nanowire width, as well as ultra-fast single photon counting with high detection rates by reducing the nanowire length.
Nanophotonic integrated circuits are emerging as a promising platform for quantum photonics. A key building block are waveguide integrated detectors with superior performance. Detectors based on superconductor nanowires (SNSPDs) attached to optical waveguides have been shown to provide high efficiency and good timing performance, as well as broad bandwidth. To move towards applications in high bandwidth quantum communication and processing, ultrafast single-photon detectors with high efficiency are needed. The speed of meander type SNSPDs is limited because the required high absorption efficiency necessitates long nanowires deposited on top of the waveguide. This enhances the kinetic inductance and makes the detectors slow. We overcome this problem by aligning the nanowire perpendicular to the waveguide to realize devices with a length below 1 µm. By integrating the nanowire into a photonic crystal cavity, we recover high absorption efficiency, thus enhancing the detection efficiency by more than an order of magnitude. Our cavity enhanced superconducting nanowire detectors are fully embedded in silicon nanophotonic circuits and efficiently detect single photons at telecom wavelengths. The detectors possess sub-nanosecond decay (~ 120 ps) and recovery times (~ 510 ps), and thus show potential for GHz count rates at low timing jitter (~ 32 ps).
Quantum photonic integration is one of the leading approaches for enabling the implementation of quantum simulation and computing at the scale of tens to hundreds of photons. Quantum photonic integrated circuits require the monolithic integration of single-photon sources and passive circuit elements, such as waveguides and couplers, with single-photon detectors. A promising approach for on-chip single-photon detection is the use of superconducting nanowires on top of semiconductor waveguides. Here, we present state-of-the-art NbN films on GaAs for the realization of waveguide superconducting single-photon detectors, suitable for integration with sources and linear optical circuits. Based on the measured optical properties, we propose a new design which allows high absorptance for short nanowires in order to increase the integration density in a quantum photonic chip. Finally, we review recent results on integrated single-photon and photon-number-resolving detectors, and integrated autocorrelators.
Ultrafast single-photon detectors with high efficiency are of utmost importance for many applications in the context of integrated quantum photonic circuits. Detectors based on superconductor nanowires attached to optical waveguides are particularly appealing for this purpose. However, their speed is limited because the required high absorption efficiency necessitates long nanowires deposited on top of the waveguide. This enhances the kinetic inductance and makes the detectors slow. Here, we solve this problem by aligning the nanowire, contrary to usual choice, perpendicular to the waveguide to realize devices with a length below 1 μm. By integrating the nanowire into a photonic crystal cavity, we recover high absorption efficiency, thus enhancing the detection efficiency by more than an order of magnitude. Our cavity enhanced superconducting nanowire detectors are fully embedded in silicon nanophotonic circuits and efficiently detect single photons at telecom wavelengths. The detectors possess subnanosecond decay (∼120 ps) and recovery times (∼510 ps) and thus show potential for GHz count rates at low timing jitter (∼32 ps). The small absorption volume allows efficient threshold multiphoton detection.
Fast and efficient detection of single photons with high timing accuracy is a crucial requirement in most quantum optics experiments and enables novel sensing and imaging solutions. Superconducting nanowire single-photon detectors (SNSPD) achieve technology-leading performance in terms of detection efficiency, dark count rate, timing jitter, and detector dead times. However, conventional SNSPDs with high system detection efficiency typically rely on resonant enhancement of the absorption efficiency, thus only achieving attractive detector benchmarks over narrow spectral windows. Waveguide-integrated SNSPDs allow for leveraging the wideband material absorption in superconducting nanowires by absorbing light in a traveling-wave geometry but have been limited to low system detection efficiencies due to interface losses when coupling to optical fibers. Here, we show how high system detection efficiencies of 22%–73% are realized over a broad wavelength range from 532 nm to 1640 nm in a single waveguide-integrated SNSPD device. We accomplish efficient coupling between optical fibers and waveguide-integrated nanowire detectors by employing a 3D interface, produced in direct laser writing, that relies on total internal reflection for achieving a broad transmission bandwidth. We further find low timing jitter of 25.7 ps and detector decay times of 9.8 ns, allowing for single-photon counting with high repetition rates up to 100 MHz. Our work paves the way for an efficient single-photon detector solution that combines the spectral requirements of an extremely wide range of quantum optics experiments in a single device. The coupling approach and SNSPD-integration with nanophotonic circuits are further well-suited for realizing large-scale detector arrays.
Abstract In this paper several designs to maximize the absorption efficiency of superconducting-nanowire single-photon detectors are investigated. Using a simple optical cavity consisting of a gold mirror and a SiO 2 layer, the absorption efficiency can be boosted to over 97%: this result is confirmed experimentally by the realization of an NbTiN-based detector having an overall system detection efficiency of 85% at 1.31 μ m. Calculations show that by sandwiching the nanowire between two dielectric Bragg reflectors, unity absorption (>99.9%) could be reached at the peak wavelength for optimized structures. To achieve broadband high efficiency, a different approach is considered: a waveguide-coupled detector. The calculations performed in this work show that, by correctly dimensioning the waveguide and the nanowire, polarization-insensitive detectors absorbing more than 95% of the injected photons over a wavelength range of several hundred nm can be designed. We propose a detector design making use of GaN/AlN waveguides, since these materials allow lattice-matched epitaxial deposition of Nb(Ti)N films and are transparent on a very wide wavelength range.