Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1602.06846 · Superconductor Science and Technology

Design of broadband high-efficiency superconducting-nanowire single photon detectors

Luca Redaelli, Gabriele Bulgarini, Sergiy M. Dobrovolskiy, Sander N. Dorenbos, Val Zwiller, Eva Monroy, J M Gérard

Published May 6, 2016• 50 citations
arXivHTMLPDF

Abstract

Abstract In this paper several designs to maximize the absorption efficiency of superconducting-nanowire single-photon detectors are investigated. Using a simple optical cavity consisting of a gold mirror and a SiO 2 layer, the absorption efficiency can be boosted to over 97%: this result is confirmed experimentally by the realization of an NbTiN-based detector having an overall system detection efficiency of 85% at 1.31 μ m. Calculations show that by sandwiching the nanowire between two dielectric Bragg reflectors, unity absorption (>99.9%) could be reached at the peak wavelength for optimized structures. To achieve broadband high efficiency, a different approach is considered: a waveguide-coupled detector. The calculations performed in this work show that, by correctly dimensioning the waveguide and the nanowire, polarization-insensitive detectors absorbing more than 95% of the injected photons over a wavelength range of several hundred nm can be designed. We propose a detector design making use of GaN/AlN waveguides, since these materials allow lattice-matched epitaxial deposition of Nb(Ti)N films and are transparent on a very wide wavelength range.

DOI
10.1088/0953-2048/29/6/065016

Related papers

High absorption efficiency and polarization-insensitivity in superconducting-nanowire single-photon detectors

Luca Redaelli, Gabriele Bulgarini, Sergiy M. Dobrovolskiy +5 more

The performance of superconducting-nanowire single-photon detectors depends on the efficiency of light absorption in the ultrathin (3-8 nm) superconducting nanowire. In this work, we will discuss two approaches to boost light absorption: coupling the nanowire to the evanescent field propagating in a waveguide and enclosing the nanowire in an optical cavity. The latter method is the most widely used, but it is intrinsically very sensitive to the polarization of light. To overcome this issue, we propose some innovative cavity designs which make use of high-index (n >2) dielectrics. With this technique, highly-efficient polarization-insensitive devices can be easily implemented.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Jan 27, 2017•0 citations

Next generation superconducting nanowire single-photon detectors

Kleanthis Erotokritou

Single photon detection advanced rapidly in the last decade. The superconducting nanowire single-photon detector (SNSPD) is an emerging technology, which offers low dark count rates, broadband sensitivity from visible to mid-infrared wavelengths and very high quantum efficiency. All these features are appealing for future emerging applications in remote gas sensing, quantum key distribution and quantum information processing. By enclosing the detector in an optical cavity, tuned to the operating wavelength, the total system detection of the SNSPD is improved. Based on the cavity design, the detector absorption is boosted at the desired experimental wavelength. Devices have been fabricated and tested, in this thesis, with enhanced detection efficiency at near-infrared, infrared and mid-infrared wavelengths. NbTiN detectors fabricated on Ta2O5 / SiO2 distributed Bragg reflectors (DBR) for front-side coupling exhibit a system detection efficiency of ≈ 90% at λ = 940 nm for the best device measured. SNSPDs were also fabricated in NbTiN on metallic mirrors for back-side coupling for 1550 and 2333 nm experimental wavelengths. The first design exhibited a system detection efficiency of ≈ 84.5%, at λ = 1550 nm for the best device measured. The second exhibited low system detection efficiency since the device suffered from unexpectedly high dark count rate mainly due to blackbody radiation at 2.2 K. However, it was possible to measure the timing jitter of this device at 350 mK indicating a FWHM of 84 ps. Another technique to improve the total system detection efficiency of the SNSPD, is by fabricating a hairpin-shaped nanowire atop a single mode waveguide. In this design, photons travel through the waveguide and via evanescent coupling are absorbed in the nanowire. These SNSPD devices have been designed to thread along single mode Si ridge waveguides using a hairpin-shaped nanowire structure, which offers enhanced coupling and absorption efficiency via evanescent coupling. These ultra-thin superconducting MoSi detectors are precisely patterned on top of a single mode Si waveguide (600 nm) with alignment error less than 40 nm. Low temperature electrical and nano-optical characterization was carried out using a two-stage pulse tube (PT) coldhead, using an additional 4He / 3He sorption pump, low vibration characterization of SNSPD devices at 350 mK was carried out. Characterised devices exhibit low dark count rate <5 counts per second and timing jitter of ≈ 83 ps full width half maximum (FWHM) at wavelength (λ) = 1550 nm and at critical current ≈ 30 µA.

•Jan 1, 2019•0 citations

Superconducting nanowire single-photon detectors at a wavelength of 940 nm

W. J. Zhang, Hao Li, Lixing You +9 more

We develop single-photon detectors comprising single-mode fiber-coupled superconducting nanowires, with high system detection efficiencies at a wavelength of 940 nm. The detector comprises a 6.5-nm-thick, 110-nm-wide NbN nanowire meander fabricated onto a Si substrate with a distributed Bragg reflector for enhancing the optical absorptance. We demonstrate that, via the design of a low filling factor (1/3) and active area (Φ = 10 μm), the system reaches a detection efficiency of ∼60% with a dark count rate of 10 Hz, a recovery time <12 ns, and a timing jitter of ∼50 ps.

arXiv:1506.07921•AIP Advances•Jun 1, 2015•7 citations

Enhancing Detection Efficiency by Applying an Optical Cavity Structure in a Superconducting Nanowire Single-Photon Detector

Shigehito Miki, Taro Yamashita, Mikio Fujiwara +2 more

We report on the enhancement of system detection efficiency in a superconducting nanowire single-photon detector (SNSPD) by applying the optical cavity structure. The nanowire was made using 4-nm-thick NbN thin films and covered with an SiO cavity and Au mirror designed for 1300-1600nm wavelengths. The device is mounted into fiber-coupled packages, and installed in a practical multichannel system based on GM cryocoolers. System detection efficiency depends on the absorptance of cavity structure, and reached 28% and 40% at 1550nm and 1310nm wavelengths, respectively. These values were considerably higher than an SNSPD without optical cavity.

IEICE Transactions on Electronics•Jan 1, 2011•3 citations

Polarization-insensitive high-efficiency superconducting nanowire single-photon detector

xin xu, Yue Fei, Qi Chen +10 more

Superconducting nanowire single-photon detectors (SNSPDs) struggle to balance high system detection efficiency (SDE) and low polarization dependence. This work proposes a co-design of the NbN films, α -Si anti-reflection coating (ARC), and SiO 2 /Ta 2 O 5 distributed Bragg reflector (DBR) to reduce the polarization-dependent optical response of the nanowires. Simulations based on rigorous coupled-wave analysis (RCWA) and the finite-element method show absorptance above 99% for both transverse-electric (TE) and transverse-magnetic (TM) polarizations and absorptance above 90% over the wavelength range from 1530 to 1640 nm. Experimentally, the device achieves 97% SDE at 1530 nm (polarization sensitivity, PS = 1.1), PS < 1.3 over 1490–1640 nm, 39.5 ns recovery time, and 63.5 ps timing jitter. Retaining a conventional single-layer meander nanowire geometry, this design unifies high efficiency and polarization insensitivity, advancing SNSPD applications in quantum communications, free-space links, and single-photon imaging.

Optics Express•Oct 8, 2026•0 citations

Efficiently Coupling Light to Superconducting Nanowire Single-Photon Detectors

Xiaolong Hu, Charles W. Holzwarth, D. Masciarelli +2 more

We designed superconducting nanowire single-photon detectors (SNSPDs) integrated with silver optical antennae for free-space coupling and a dielectric waveguide for fiber coupling. According to our finite-element simulation, (1) for the free-space coupling, the absorptance of the NbN nanowire for TM-polarized photons at the wavelength of 1550 nm can be as high as 96% by adding silver optical antennae; (2) for the fiber coupling, the absorptance of the NbN nanowire for TE-like-polarized photons can reach 76% including coupling efficiency at the wavelength of 1550 nm by adding a silicon nitride waveguide and an inverse-taper coupler.

IEEE Transactions on Applied Superconductivity•Jun 1, 2009•90 citations
Abstract In this paper several designs to maximize the absorption efficiency of superconducting-nanowire single-photon detectors are investigated. Using a simple optical cavity consisting of a gold mirror and a SiO 2 layer, the absorption efficiency can be boosted to over 97%: this result is confirmed experimentally by the realization of an NbTiN-based detector having an overall system detection efficiency of 85% at 1.31 μ m. Calculations show that by sandwiching the nanowire between two dielectric Bragg reflectors, unity absorption (>99.9%) could be reached at the peak wavelength for optimized structures. To achieve broadband high efficiency, a different approach is considered: a waveguide-coupled detector. The calculations performed in this work show that, by correctly dimensioning the waveguide and the nanowire, polarization-insensitive detectors absorbing more than 95% of the injected photons over a wavelength range of several hundred nm can be designed. We propose a detector design making use of GaN/AlN waveguides, since these materials allow lattice-matched epitaxial deposition of Nb(Ti)N films and are transparent on a very wide wavelength range.
The performance of superconducting-nanowire single-photon detectors depends on the efficiency of light absorption in the ultrathin (3-8 nm) superconducting nanowire. In this work, we will discuss two approaches to boost light absorption: coupling the nanowire to the evanescent field propagating in a waveguide and enclosing the nanowire in an optical cavity. The latter method is the most widely used, but it is intrinsically very sensitive to the polarization of light. To overcome this issue, we propose some innovative cavity designs which make use of high-index (n >2) dielectrics. With this technique, highly-efficient polarization-insensitive devices can be easily implemented.
Single photon detection advanced rapidly in the last decade. The superconducting nanowire single-photon detector (SNSPD) is an emerging technology, which offers low dark count rates, broadband sensitivity from visible to mid-infrared wavelengths and very high quantum efficiency. All these features are appealing for future emerging applications in remote gas sensing, quantum key distribution and quantum information processing. By enclosing the detector in an optical cavity, tuned to the operating wavelength, the total system detection of the SNSPD is improved. Based on the cavity design, the detector absorption is boosted at the desired experimental wavelength. Devices have been fabricated and tested, in this thesis, with enhanced detection efficiency at near-infrared, infrared and mid-infrared wavelengths. NbTiN detectors fabricated on Ta2O5 / SiO2 distributed Bragg reflectors (DBR) for front-side coupling exhibit a system detection efficiency of ≈ 90% at λ = 940 nm for the best device measured. SNSPDs were also fabricated in NbTiN on metallic mirrors for back-side coupling for 1550 and 2333 nm experimental wavelengths. The first design exhibited a system detection efficiency of ≈ 84.5%, at λ = 1550 nm for the best device measured. The second exhibited low system detection efficiency since the device suffered from unexpectedly high dark count rate mainly due to blackbody radiation at 2.2 K. However, it was possible to measure the timing jitter of this device at 350 mK indicating a FWHM of 84 ps. Another technique to improve the total system detection efficiency of the SNSPD, is by fabricating a hairpin-shaped nanowire atop a single mode waveguide. In this design, photons travel through the waveguide and via evanescent coupling are absorbed in the nanowire. These SNSPD devices have been designed to thread along single mode Si ridge waveguides using a hairpin-shaped nanowire structure, which offers enhanced coupling and absorption efficiency via evanescent coupling. These ultra-thin superconducting MoSi detectors are precisely patterned on top of a single mode Si waveguide (600 nm) with alignment error less than 40 nm. Low temperature electrical and nano-optical characterization was carried out using a two-stage pulse tube (PT) coldhead, using an additional 4He / 3He sorption pump, low vibration characterization of SNSPD devices at 350 mK was carried out. Characterised devices exhibit low dark count rate <5 counts per second and timing jitter of ≈ 83 ps full width half maximum (FWHM) at wavelength (λ) = 1550 nm and at critical current ≈ 30 µA.
We develop single-photon detectors comprising single-mode fiber-coupled superconducting nanowires, with high system detection efficiencies at a wavelength of 940 nm. The detector comprises a 6.5-nm-thick, 110-nm-wide NbN nanowire meander fabricated onto a Si substrate with a distributed Bragg reflector for enhancing the optical absorptance. We demonstrate that, via the design of a low filling factor (1/3) and active area (Φ = 10 μm), the system reaches a detection efficiency of ∼60% with a dark count rate of 10 Hz, a recovery time <12 ns, and a timing jitter of ∼50 ps.
We report on the enhancement of system detection efficiency in a superconducting nanowire single-photon detector (SNSPD) by applying the optical cavity structure. The nanowire was made using 4-nm-thick NbN thin films and covered with an SiO cavity and Au mirror designed for 1300-1600nm wavelengths. The device is mounted into fiber-coupled packages, and installed in a practical multichannel system based on GM cryocoolers. System detection efficiency depends on the absorptance of cavity structure, and reached 28% and 40% at 1550nm and 1310nm wavelengths, respectively. These values were considerably higher than an SNSPD without optical cavity.
Superconducting nanowire single-photon detectors (SNSPDs) struggle to balance high system detection efficiency (SDE) and low polarization dependence. This work proposes a co-design of the NbN films, α -Si anti-reflection coating (ARC), and SiO 2 /Ta 2 O 5 distributed Bragg reflector (DBR) to reduce the polarization-dependent optical response of the nanowires. Simulations based on rigorous coupled-wave analysis (RCWA) and the finite-element method show absorptance above 99% for both transverse-electric (TE) and transverse-magnetic (TM) polarizations and absorptance above 90% over the wavelength range from 1530 to 1640 nm. Experimentally, the device achieves 97% SDE at 1530 nm (polarization sensitivity, PS = 1.1), PS < 1.3 over 1490–1640 nm, 39.5 ns recovery time, and 63.5 ps timing jitter. Retaining a conventional single-layer meander nanowire geometry, this design unifies high efficiency and polarization insensitivity, advancing SNSPD applications in quantum communications, free-space links, and single-photon imaging.
We designed superconducting nanowire single-photon detectors (SNSPDs) integrated with silver optical antennae for free-space coupling and a dielectric waveguide for fiber coupling. According to our finite-element simulation, (1) for the free-space coupling, the absorptance of the NbN nanowire for TM-polarized photons at the wavelength of 1550 nm can be as high as 96% by adding silver optical antennae; (2) for the fiber coupling, the absorptance of the NbN nanowire for TE-like-polarized photons can reach 76% including coupling efficiency at the wavelength of 1550 nm by adding a silicon nitride waveguide and an inverse-taper coupler.