Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Future Networks World Forum (FNWF)

Evaluating Quantum Channels with 5G-Compliant Error Correction Schemes

Siddharth Kumar Das, Riccardo Bassoli, Frank H. P. Fitzek

Published Oct 15, 2024• 1 citation
Publisher

Abstract

Bridging the gap between classical and quantum communication is a well sought-after topic with significant potential in fortifying the networks of the future. In that direction, we have attempted to analyse realistic quantum channels through the lens of classical communication frameworks. To achieve this, we have developed a simulation environment that integrates classical link-level simulator with a quantum simulator, allowing an in-depth assessment of quantum noise impacts on 5G-compliant error correction code (ECC). We focused on the performance of low density parity check (LDPC) codes and polar codes under the influence of these quantum models. The comparative analysis, primarily on bit error rate (BER) performance demonstrates a clear advantage for LDPC codes across both quantum channel under identical simulation conditions. The results of this study offer valuable insights into how classical ECC perspectives can be applied to quantum channels, guiding the selection of appropriate error correction schemes tailored to specific quantum channel models.

DOI
10.1109/fnwf63303.2024.11028815

Related papers

QUANTUM-INSPIRED ERROR CORRECTION CODES FOR ULTRA-RELIABLE COMMUNICATION IN NEXT-GENERATION NETWORKS

Syed Mohd Saqib, Sevuga Pandian A

The rapid growth of next-generation networks has created a strong demand for communication systems that have delivered high reliability, low latency, and resilience under harsh channel conditions. Although classical error correction codes have improved many wireless links, their performance has proved insufficient as data rates increased and channel dynamics became more unpredictable. This study has explored a quantum-inspired error correction framework that has combined structural principles from quantum stabilizer codes with the efficiency of classical block codes. The aim was to provide an adaptive mechanism that has reduced noise effects and supported ultra-reliable communication targets. The problem has emerged from the gap between existing coding techniques and the reliability requirements of mission-critical services. Classical codes have struggled when the channel has exhibited fast fading or burst noise, and quantum codes, while powerful, have required complex hardware. The proposed approach has addressed this gap by adopting quantum-inspired parity structures that have retained the lightweight processing of classical codes while mimicking the robustness observed in quantum systems. The method has employed a hybrid coding model that has integrated a modified stabilizer-like generator with a classical low-density parity check backbone. The encoder has produced redundant qubit-analogous syndromes that have allowed the decoder to infer error patterns with higher confidence. A sequential belief-propagation algorithm has been used, which has adjusted decoding weights according to channel variation. Simulations have been performed over Rayleigh and Rician channels, and the system has been tested under high mobility. The results of the proposed framework demonstrate substantial improvements over conventional coding methods. The hybrid stabilizer-LDPC structure reduces the bit error rate from 22.3% to 0.5% across an SNR range of 0–20 dB and lowers the frame error rate from 45.7% to 1.1%. Throughput improves from 4.2 Mbps at 0 dB to 13.8 Mbps at 20 dB, while the average decoding iterations decrease from 42 to 5, indicating reduced computational complexity. Under high-speed mobility, BER and FER remain low at 2.3% and 4.6%, respectively, while throughput stays above 10.2 Mbps and convergence requires only 12 iterations. These numerical results confirm that the proposed method provides highly reliable, efficient, and adaptive error correction suitable for next-generation networks.

ICTACT Journal on Communication Technology•Dec 1, 2025•0 citations

A New VLSI Architecture of Next-Generation QC-LDPC Decoder for 5G New-Radio Wireless-Communication Standard

Anuj Verma, Rahul Shrestha

In this paper, we present a new microarchitecture of low-density parity-check (LDPC) decoder compliant to the specifications of 5G new-radio (NR) wireless-communication standard. This work suggests a fully-parallel VLSI architecture for this decoder to achieve high throughput. The digital architecture of internal modules as well as system-level design of the LDPC decoder are presented here. The comprehensive bit-error-rate (BER) performance analyses of our LDPC decoder has been performed in additive-white Gaussian-noise (AWGN) channel environment for various number of decoding iterations and bit-quantization. It delivers a BER of 10-6at 1 dB of Eb/N0while decoding for 10 iterations with 7-bits quantization. In addition, FPGA implementation and post-route simulation of the proposed LDPC decoder are carried out that can decode an encoded LDPC code of 26112 code-length for 1/3 code-rate. Our decoder has achieved a throughput of 2.9 Gbps while operating at a clock frequency of 102 MHz. These implementation results are compared with the reported works where our design delivered 20× better throughput compared to the state-of-the-art LDPC decoders.

IEEE International Symposium on Circuits and Systems proceedings•Sep 29, 2020•22 citations

Comparative Study of Quantum and Classical Error Correction for Future Quantum-6G Networks

Siddharth Kumar Das, Riccardo Bassoli, Roberto Ferrara +4 more

The paper compares quantum and classical error correction scheme with the aim for a pathway to 5G beyond networks where there will be a notion of quantum computation in the current classical communication architecture.

•Mar 17, 2023•0 citations

Secure and Reliable 6G Communications with BCH-Based GLDPC and Kyber

Linh Nguyen, Cheol-Hong Min, Hanho Lee +1 more

Channel coding in sixth-generation (6G) networks must attain exceptionally low bit error rate (BER), typically in the range of 10–6to 10–9, to ensure the requisite level of reliability. While fifth-generation (5G) New Radio (NR) coding techniques have made substantial progress, the inherent limitations of the low error floor impede the attainment of such stringent BER targets. Compared to the low-density parity check (LDPC) codes employed in 5G communications, generalized low-density parity check (GLDPC) codes offer a more advantageous tradeoff between computational complexity and error correction performance in 6G networks. GLDPC codes enhance traditional LDPC structures by incorporating more complex local decoding units within their check nodes. When coupled with cryptographic techniques, GLDPC codes can establish a robust information security framework. In this paper, we propose a new security-based GLDPC that uses a number of BCH matrices for the GLDPC decoding process combined with the Kyber algorithm (BCH-based KyGLDPC) before transmitting data to increase reli-ability and solve the security problem against quantum computer attacks. The system's performance is assessed using both image data and data encrypted prior to transmission in a white additive Gaussian noise environment. The results indicate that the system provides strong error correction and data security.

International Conference on Consumer Electronics•Jan 11, 2025•1 citation

Comparative Study of Quantum and Classical Error Correction for Future Quantum-6G Networks

Siddharth Kumar Das, Riccardo Bassoli, Roberto Ferrara +4 more

The paper compares quantum and classical error correction scheme with the aim for a pathway to 5G beyond networks where there will be a notion of quantum computation in the current classical communication architecture.

•Mar 17, 2023•0 citations

Concatenated Polar and Non binary LDPC codes for High Reliability in Optical Communication System

Saiith Sethu P, Sam Solomon

Next-generation high-speed optical transport systems require powerful forward error correction (FEC) codes with high error-correcting capabilities to ensure high data reliability. Low density parity check (LDPC) codes are strong candidates for ensuring the high data reliability needed to support data rates of 100 Gb/s, demanded by optical systems. Non-binary LDPC (NB-LDPC) codes provides better performance compared to binary version, as they offer larger coding gains with shorter code lengths and reduced system latency. Despite their advantages, LDPC codes suffer from error floor problem at low bit error rates (BER), with NB-LDPC codes showing error floors at BER around 10-7. High-speed optical transport systems generally require BERs of the order of 10-12. The error floor problem can be mitigated by concatenating LDPC codes with a shorter outer code. Existing works mainly focus on employing Reed Solomon (RS) codes to remove error floor. However, the decoding complexity is high for these codes. This paper proposes concatenated Polar and NB-LDPC codes to address the error floor issue, since polar codes have relatively low encoding and decoding complexity. The channel noise in optical communication systems using optical amplifiers cannot be analyzed using simplified additive white Gaussian noise (AWGN). Hence the channel noise is mathematically derived and proved that chi-square channel model is appropriate than AWGN. Simulation results demonstrate that the proposed concatenated codes over proposed channel model can achieve a net coding gain of around 1.5dB at a BER of 10-12.

International Conference on Circuits, Control, Communication and Computing (I4C)•Oct 4, 2024•1 citation
Bridging the gap between classical and quantum communication is a well sought-after topic with significant potential in fortifying the networks of the future. In that direction, we have attempted to analyse realistic quantum channels through the lens of classical communication frameworks. To achieve this, we have developed a simulation environment that integrates classical link-level simulator with a quantum simulator, allowing an in-depth assessment of quantum noise impacts on 5G-compliant error correction code (ECC). We focused on the performance of low density parity check (LDPC) codes and polar codes under the influence of these quantum models. The comparative analysis, primarily on bit error rate (BER) performance demonstrates a clear advantage for LDPC codes across both quantum channel under identical simulation conditions. The results of this study offer valuable insights into how classical ECC perspectives can be applied to quantum channels, guiding the selection of appropriate error correction schemes tailored to specific quantum channel models.
The rapid growth of next-generation networks has created a strong demand for communication systems that have delivered high reliability, low latency, and resilience under harsh channel conditions. Although classical error correction codes have improved many wireless links, their performance has proved insufficient as data rates increased and channel dynamics became more unpredictable. This study has explored a quantum-inspired error correction framework that has combined structural principles from quantum stabilizer codes with the efficiency of classical block codes. The aim was to provide an adaptive mechanism that has reduced noise effects and supported ultra-reliable communication targets. The problem has emerged from the gap between existing coding techniques and the reliability requirements of mission-critical services. Classical codes have struggled when the channel has exhibited fast fading or burst noise, and quantum codes, while powerful, have required complex hardware. The proposed approach has addressed this gap by adopting quantum-inspired parity structures that have retained the lightweight processing of classical codes while mimicking the robustness observed in quantum systems. The method has employed a hybrid coding model that has integrated a modified stabilizer-like generator with a classical low-density parity check backbone. The encoder has produced redundant qubit-analogous syndromes that have allowed the decoder to infer error patterns with higher confidence. A sequential belief-propagation algorithm has been used, which has adjusted decoding weights according to channel variation. Simulations have been performed over Rayleigh and Rician channels, and the system has been tested under high mobility. The results of the proposed framework demonstrate substantial improvements over conventional coding methods. The hybrid stabilizer-LDPC structure reduces the bit error rate from 22.3% to 0.5% across an SNR range of 0–20 dB and lowers the frame error rate from 45.7% to 1.1%. Throughput improves from 4.2 Mbps at 0 dB to 13.8 Mbps at 20 dB, while the average decoding iterations decrease from 42 to 5, indicating reduced computational complexity. Under high-speed mobility, BER and FER remain low at 2.3% and 4.6%, respectively, while throughput stays above 10.2 Mbps and convergence requires only 12 iterations. These numerical results confirm that the proposed method provides highly reliable, efficient, and adaptive error correction suitable for next-generation networks.
In this paper, we present a new microarchitecture of low-density parity-check (LDPC) decoder compliant to the specifications of 5G new-radio (NR) wireless-communication standard. This work suggests a fully-parallel VLSI architecture for this decoder to achieve high throughput. The digital architecture of internal modules as well as system-level design of the LDPC decoder are presented here. The comprehensive bit-error-rate (BER) performance analyses of our LDPC decoder has been performed in additive-white Gaussian-noise (AWGN) channel environment for various number of decoding iterations and bit-quantization. It delivers a BER of 10-6at 1 dB of Eb/N0while decoding for 10 iterations with 7-bits quantization. In addition, FPGA implementation and post-route simulation of the proposed LDPC decoder are carried out that can decode an encoded LDPC code of 26112 code-length for 1/3 code-rate. Our decoder has achieved a throughput of 2.9 Gbps while operating at a clock frequency of 102 MHz. These implementation results are compared with the reported works where our design delivered 20× better throughput compared to the state-of-the-art LDPC decoders.
Channel coding in sixth-generation (6G) networks must attain exceptionally low bit error rate (BER), typically in the range of 10–6to 10–9, to ensure the requisite level of reliability. While fifth-generation (5G) New Radio (NR) coding techniques have made substantial progress, the inherent limitations of the low error floor impede the attainment of such stringent BER targets. Compared to the low-density parity check (LDPC) codes employed in 5G communications, generalized low-density parity check (GLDPC) codes offer a more advantageous tradeoff between computational complexity and error correction performance in 6G networks. GLDPC codes enhance traditional LDPC structures by incorporating more complex local decoding units within their check nodes. When coupled with cryptographic techniques, GLDPC codes can establish a robust information security framework. In this paper, we propose a new security-based GLDPC that uses a number of BCH matrices for the GLDPC decoding process combined with the Kyber algorithm (BCH-based KyGLDPC) before transmitting data to increase reli-ability and solve the security problem against quantum computer attacks. The system's performance is assessed using both image data and data encrypted prior to transmission in a white additive Gaussian noise environment. The results indicate that the system provides strong error correction and data security.
Next-generation high-speed optical transport systems require powerful forward error correction (FEC) codes with high error-correcting capabilities to ensure high data reliability. Low density parity check (LDPC) codes are strong candidates for ensuring the high data reliability needed to support data rates of 100 Gb/s, demanded by optical systems. Non-binary LDPC (NB-LDPC) codes provides better performance compared to binary version, as they offer larger coding gains with shorter code lengths and reduced system latency. Despite their advantages, LDPC codes suffer from error floor problem at low bit error rates (BER), with NB-LDPC codes showing error floors at BER around 10-7. High-speed optical transport systems generally require BERs of the order of 10-12. The error floor problem can be mitigated by concatenating LDPC codes with a shorter outer code. Existing works mainly focus on employing Reed Solomon (RS) codes to remove error floor. However, the decoding complexity is high for these codes. This paper proposes concatenated Polar and NB-LDPC codes to address the error floor issue, since polar codes have relatively low encoding and decoding complexity. The channel noise in optical communication systems using optical amplifiers cannot be analyzed using simplified additive white Gaussian noise (AWGN). Hence the channel noise is mathematically derived and proved that chi-square channel model is appropriate than AWGN. Simulation results demonstrate that the proposed concatenated codes over proposed channel model can achieve a net coding gain of around 1.5dB at a BER of 10-12.