Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Quantum Optics and Photon Counting

Linearity and scalability of photon counting: toward accurate multiparameter photonic sensing

Miroslav Ježek

Published Jun 6, 2025• 0 citations
Publisher

Abstract

We introduce the direct linearity characterization of single-photon detectors and photon-number-resolving detectors. We discuss the supralinearity that goes beyond the current single-photon detection models. We also report on advanced detectors and sensors of statistical, vector, and correlation properties of light down to the single-photon level. The novel detection schemes harness complex optical networks, single-photon detector arrays, and deep learning. We present high-fidelity photon statistics estimation, resource-efficient polarization sensor, and quantum entanglement detector. We discuss the efficiency and scaling of the presented detection modalities.

DOI
10.1117/12.3056202

Related papers

Linear Optics to Scalable Photonic Quantum Computing

Dennis Delali Kwesi Wayo, Leonardo Goliatt, Ganji, Darvish

Recent advancements in quantum photonics have driven significant progress in photonic quantum computing (PQC), addressing challenges in scalability, efficiency, and fault tolerance. Experimental efforts have focused on integrated photonic platforms utilizing materials such as silicon photonics and lithium niobate to enhance performance. Parameters like photon loss rates, coupling efficiencies, and fidelities have been pivotal, with state-of-the-art systems achieving coupling efficiencies above 90% and photon indistinguishability exceeding 99%. Quantum error correction schemes have reduced logical error rates to below $10^{-3}$, marking a step toward fault-tolerant PQC. Photon generation has also advanced with deterministic sources, such as quantum dots, achieving brightness levels exceeding $10^6$ photon pairs/s/mW and time-bin encoding enabling scalable entanglement. Heralded single-photon sources now exhibit purities above 99%, driven by innovations in fabrication techniques. High-efficiency photon detectors, such as superconducting nanowire single-photon detectors (SNSPDs), have demonstrated detection efficiencies exceeding 98%, dark count rates below 1 Hz, and timing jitters as low as 15 ps, ensuring precise photon counting and manipulation. Moreover, demonstrations of boson sampling with over 100 photons underscore the growing computational power of photonic systems, surpassing classical limits. The integration of machine learning has optimized photonic circuit design, while frequency multiplexing and time-bin encoding have increased system scalability. Together, these advances bridge the gap between theoretical potential and practical implementation, positioning PQC as a transformative technology for computing, communication, and quantum sensing.

arXiv:2501.02513•Jan 5, 2025•0 citations

Absolute calibration of single-photon and multiplexed photon-number-resolving detectors

Lior Cohen, Y. Pilnyak, D. Istrati +3 more

Single-photon detectors are widely used in modern quantum optics experiments and applications. Like all detectors, it is important for these devices to be accurately calibrated. A single-photon detector is calibrated by determining its detection efficiency; the common method to measure this quantity requires comparison to another detector. Here, we suggest a method to measure the detection efficiency of a single-photon detector without requiring an external reference detector. Our method is valid for individual single-photon detectors as well as multiplexed detectors, which are known to be photon number resolving. The method exploits the even-number photon-statistics of a nonlinear source, as well as the nonlinear loss of a single-photon detector that occurs when multiple photons are incident simultaneously. We have analytically modeled multiplexed detectors and used the results to experimentally demonstrate the calibration of a single-photon detector without the need for an external reference detector.

arXiv:1711.03594•Physical Review A•Jul 5, 2018•27 citations

Engineering integrated photon pair sources and multiplexed detectors (Conference Presentation)

Evan Meyer-Scott, Nidhin Prasannan, Nicola Montaut +11 more

Two important challenges in quantum photonics are to generate useful states with high fidelity, and to detect them and verify their properties. Particularly valuable states are single photons and entangled photon pairs in well-defined optical modes, as they can be used in many quantum information protocols or used to build up more complex states. For sources, we employ integrated nonlinear optics (waveguides in lithium niobite and potassium titanyl phosphate) to maximize brightness and go beyond what is possible in bulk optics, showing simultaneously high state fidelity, heralding efficiency, and spectral purity across three experiments: first we show record heralding efficiency in a fully-fibered heralded single-photon source, and use it to probe the tradeoff between spectral purity and heralding efficiency in non-engineered sources. With an engineered source, we then herald up to 50 photons in a nonclassical state. The last source is for polarization-entangled photon pairs, with brightness of 3.5 million pairs/s·mW, fidelity to a Bell state of 96%, heralding efficiency of 43%, and HOM interference visibility of 82%. Once a complex state is constructed, it must also be verified. For this we employ a time-multiplexed detector consisting of a fibre loop and a single-photon detector. Surprisingly, we are able to extract information even in the saturation regime of the detector. We use the click statistics of the time-multiplexed detector to verify the non-classicality of quantum light, and we use its extremely high dynamic range (123 dB) to measure a macroscopic power level with a single-photon detector. Eliminating calibrated attenuators with this approach will allow direct standardization of quantum and classical optical power levels.

Advances in Photonics of Quantum Computing, Memory, and Communication•Mar 8, 2019•0 citations

Noise-free high-efficiency photon-number-resolving detectors

Danna Rosenberg, Adriana E. Lita, Aaron Miller +1 more

High-efficiency optical detectors that can determine the number of photons in a pulse of monochromatic light have applications in a variety of physics studies, including post-selection-based entanglement protocols for linear optics quantum computing and experiments that simultaneously close the detection and communication loopholes of Bell's inequalities. Here we report on our demonstration of fiber-coupled, noise-free, photon-number-resolving transition-edge sensors with 88% efficiency at 1550 nm. The efficiency of these sensors could be made even higher at any wavelength in the visible and near-infrared spectrum without resulting in a higher dark-count rate or degraded photon-number resolution.

arXiv:quant-ph/0506175•Physical Review A•Jun 17, 2005•242 citations

Single-photon linear polarimeter based on a superconducting nanowire array

Sun, X. Q., W. J. Zhang, Chaojie Zhang +6 more

Superconducting nanowire single-photon detectors (SNSPDs) have attracted remarkable interest for visible and near infrared single-photon detection, owing to their outstanding performance. Conventional SNSPDs are generally used as binary photon-counting detector. Another important characteristic of light, i.e., polarization, has not been resolved using standalone SNSPDs. In this work, we simulated, fabricated, and characterized a linear polarimeter based on a four-pixel NbN superconducting nanowire array, capable of resolving the polarization state of linearly polarized light at the single-photon level. The detector array design is based on a division of focal plane sensor, in which the orientation of each nanowire division (pixel) is offset by 45 degree. Each single nanowire pixel operates as a combination of photon detector and almost linear polarization filter, with an average polarization extinction ratio of approximately 10. The total system detection efficiency with four pixels is approximately 1% at a total dark count rate of 680 cps, when the detector array is free-space coupled and illuminated with 1550 nm photons. The Stokes parameters are extracted from polarization measurements of the four pixels. The mean errors of the measured AoP and DoLP were about -3 degree and 0.12, respectively. Our results indicate that it is possible to develop a scalable polarization polarimeter or imager based on a superconducting nanowire array. This detector array may find promising application in single-photon polarization detection and imaging.

arXiv:2005.09820•May 20, 2020•1 citation

Accurate detection of photon statistics

Josef Hloušek, Jan Grygar, Michal Dudka +3 more

We present advanced methods of photon-number-resolving detection, which allow for photon statistics measurement and quantum feature extraction with unprecedented accuracy and dynamic range. Applications include nonclassicality and non-Gaussianity detection, photon statistics discrimination, and conditional preparation.

Quantum 2.0 Conference and Exhibition•Jan 1, 2022•0 citations
We introduce the direct linearity characterization of single-photon detectors and photon-number-resolving detectors. We discuss the supralinearity that goes beyond the current single-photon detection models. We also report on advanced detectors and sensors of statistical, vector, and correlation properties of light down to the single-photon level. The novel detection schemes harness complex optical networks, single-photon detector arrays, and deep learning. We present high-fidelity photon statistics estimation, resource-efficient polarization sensor, and quantum entanglement detector. We discuss the efficiency and scaling of the presented detection modalities.
Recent advancements in quantum photonics have driven significant progress in photonic quantum computing (PQC), addressing challenges in scalability, efficiency, and fault tolerance. Experimental efforts have focused on integrated photonic platforms utilizing materials such as silicon photonics and lithium niobate to enhance performance. Parameters like photon loss rates, coupling efficiencies, and fidelities have been pivotal, with state-of-the-art systems achieving coupling efficiencies above 90% and photon indistinguishability exceeding 99%. Quantum error correction schemes have reduced logical error rates to below 10−310^{-3}10−3, marking a step toward fault-tolerant PQC. Photon generation has also advanced with deterministic sources, such as quantum dots, achieving brightness levels exceeding 10610^6106 photon pairs/s/mW and time-bin encoding enabling scalable entanglement. Heralded single-photon sources now exhibit purities above 99%, driven by innovations in fabrication techniques. High-efficiency photon detectors, such as superconducting nanowire single-photon detectors (SNSPDs), have demonstrated detection efficiencies exceeding 98%, dark count rates below 1 Hz, and timing jitters as low as 15 ps, ensuring precise photon counting and manipulation. Moreover, demonstrations of boson sampling with over 100 photons underscore the growing computational power of photonic systems, surpassing classical limits. The integration of machine learning has optimized photonic circuit design, while frequency multiplexing and time-bin encoding have increased system scalability. Together, these advances bridge the gap between theoretical potential and practical implementation, positioning PQC as a transformative technology for computing, communication, and quantum sensing.
Single-photon detectors are widely used in modern quantum optics experiments and applications. Like all detectors, it is important for these devices to be accurately calibrated. A single-photon detector is calibrated by determining its detection efficiency; the common method to measure this quantity requires comparison to another detector. Here, we suggest a method to measure the detection efficiency of a single-photon detector without requiring an external reference detector. Our method is valid for individual single-photon detectors as well as multiplexed detectors, which are known to be photon number resolving. The method exploits the even-number photon-statistics of a nonlinear source, as well as the nonlinear loss of a single-photon detector that occurs when multiple photons are incident simultaneously. We have analytically modeled multiplexed detectors and used the results to experimentally demonstrate the calibration of a single-photon detector without the need for an external reference detector.
Two important challenges in quantum photonics are to generate useful states with high fidelity, and to detect them and verify their properties. Particularly valuable states are single photons and entangled photon pairs in well-defined optical modes, as they can be used in many quantum information protocols or used to build up more complex states. For sources, we employ integrated nonlinear optics (waveguides in lithium niobite and potassium titanyl phosphate) to maximize brightness and go beyond what is possible in bulk optics, showing simultaneously high state fidelity, heralding efficiency, and spectral purity across three experiments: first we show record heralding efficiency in a fully-fibered heralded single-photon source, and use it to probe the tradeoff between spectral purity and heralding efficiency in non-engineered sources. With an engineered source, we then herald up to 50 photons in a nonclassical state. The last source is for polarization-entangled photon pairs, with brightness of 3.5 million pairs/s·mW, fidelity to a Bell state of 96%, heralding efficiency of 43%, and HOM interference visibility of 82%. Once a complex state is constructed, it must also be verified. For this we employ a time-multiplexed detector consisting of a fibre loop and a single-photon detector. Surprisingly, we are able to extract information even in the saturation regime of the detector. We use the click statistics of the time-multiplexed detector to verify the non-classicality of quantum light, and we use its extremely high dynamic range (123 dB) to measure a macroscopic power level with a single-photon detector. Eliminating calibrated attenuators with this approach will allow direct standardization of quantum and classical optical power levels.
High-efficiency optical detectors that can determine the number of photons in a pulse of monochromatic light have applications in a variety of physics studies, including post-selection-based entanglement protocols for linear optics quantum computing and experiments that simultaneously close the detection and communication loopholes of Bell's inequalities. Here we report on our demonstration of fiber-coupled, noise-free, photon-number-resolving transition-edge sensors with 88% efficiency at 1550 nm. The efficiency of these sensors could be made even higher at any wavelength in the visible and near-infrared spectrum without resulting in a higher dark-count rate or degraded photon-number resolution.
Superconducting nanowire single-photon detectors (SNSPDs) have attracted remarkable interest for visible and near infrared single-photon detection, owing to their outstanding performance. Conventional SNSPDs are generally used as binary photon-counting detector. Another important characteristic of light, i.e., polarization, has not been resolved using standalone SNSPDs. In this work, we simulated, fabricated, and characterized a linear polarimeter based on a four-pixel NbN superconducting nanowire array, capable of resolving the polarization state of linearly polarized light at the single-photon level. The detector array design is based on a division of focal plane sensor, in which the orientation of each nanowire division (pixel) is offset by 45 degree. Each single nanowire pixel operates as a combination of photon detector and almost linear polarization filter, with an average polarization extinction ratio of approximately 10. The total system detection efficiency with four pixels is approximately 1% at a total dark count rate of 680 cps, when the detector array is free-space coupled and illuminated with 1550 nm photons. The Stokes parameters are extracted from polarization measurements of the four pixels. The mean errors of the measured AoP and DoLP were about -3 degree and 0.12, respectively. Our results indicate that it is possible to develop a scalable polarization polarimeter or imager based on a superconducting nanowire array. This detector array may find promising application in single-photon polarization detection and imaging.