Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Journal of Circuits Systems and Computers

Optimizing Layout Synthesis for Quantum Computing Performance

Chi‐Chou Kao, Hung-Yi Lin

Published Mar 6, 2025• 0 citations
Publisher

Abstract

In recent years, the emergence of the Noisy Intermediate-Scale Quantum (NISQ) era has led to the development of a wide variety of quantum devices, marking a dynamic phase in the field of quantum computing. Despite these advancements, practical applications of quantum computers still face significant challenges, one of the most prominent being the limited connectivity between physical quantum bits (qubits). This limitation requires quantum circuits to be recompiled through layout synthesis before they can be executed on quantum devices. Layout synthesis determines the specific placement of quantum gates within the circuit on the physical hardware. When gates do not align with the connectivity constraints of the device, additional quantum gates must be inserted to remap the qubits, which can negatively affect the circuit’s efficiency and performance. To address this issue, the primary goal of this paper is to enhance the mapping process within layout synthesis, aiming to optimize both the layout and the circuit depth. Experimental results demonstrate that the proposed method effectively reduces the quantum circuit depth, outperforming other existing approaches in terms of efficiency.

DOI
10.1142/s0218126625502883

Related papers

Optimal Layout Synthesis for Deep Quantum Circuits on NISQ Processors with 100+ Qubits

Irfansha Shaik, Jaco van de Pol

Layout synthesis is mapping a quantum circuit to a quantum processor. SWAP gate insertions are needed for scheduling 2-qubit gates only on connected physical qubits. With the ever-increasing number of qubits in NISQ processors, scalable layout synthesis is of utmost importance. With large optimality gaps observed in heuristic approaches, scalable exact methods are needed. While recent exact and near-optimal approaches scale to moderate circuits, large deep circuits are still out of scope. In this work, we propose a SAT encoding based on parallel plans that apply 1 SWAP and a group of CNOTs at each time step. Using domain-specific information, we maintain optimality in parallel plans while scaling to large and deep circuits. From our results, we show the scalability of our approach which significantly outperforms leading exact and near-optimal approaches (up to 100x). For the first time, we can optimally map several 8, 14, and 16 qubit circuits onto 54, 80, and 127 qubit platforms with up to 17 SWAPs. While adding optimal SWAPs, we also report near-optimal depth in our mapped circuits.

arXiv:2403.11598•Leibniz international proceedings in informatics•Jan 1, 2024•7 citations

Optimal Layout Synthesis for Quantum Circuits as Classical Planning

Irfansha Shaik, Jaco van de Pol

In Layout Synthesis, the logical qubits of a quantum circuit are mapped to the physical qubits of a given quantum hardware platform, taking into account the connectivity of physical qubits. This involves inserting SWAP gates before an operation is applied on distant qubits. Optimal Layout Synthesis is crucial for practical Quantum Computing on current error-prone hardware: Minimizing the number of SWAP gates directly mitigates the error rates when running quantum circuits. In recent years, several approaches have been proposed for minimizing the required SWAP insertions. The proposed exact approaches can only scale to a small number of qubits. In this paper, we provide two encodings for Optimal Layout Synthesis as a classical planning problem. We use optimal classical planners to synthesize the optimal layout for a standard set of benchmarks. Our results show the scalability of our approach compared to previous leading approaches. We can optimally map circuits with 9 qubits onto a 14 qubit platform, which could not be handled before by exact methods.

•Oct 28, 2023•14 citations

Efficient CNOT Synthesis for NISQ Devices

Yao Tang

In the era of noisy intermediate-scale quantum (NISQ), executing quantum algorithms on actual quantum devices faces unique challenges. One such challenge is that quantum devices in this era have restricted connectivity: quantum gates are allowed to act only on specific pairs of physical qubits. For this reason, a quantum circuit needs to go through a compiling process called qubit routing before it can be executed on a quantum computer. In this study, we propose a CNOT synthesis method called the token reduction method to solve this problem. The token reduction method works for all quantum computers whose architecture is represented by connected graphs. A major difference between our method and the existing ones is that our method synthesizes a circuit to an output qubit mapping that might be different from the input qubit mapping. The final mapping for the synthesis is determined dynamically during the synthesis process. Results showed that our algorithm consistently outperforms the best publicly accessible algorithm for all of the tested quantum architectures.

arXiv:2011.06760•Nov 12, 2020•5 citations

Optimal Layout Synthesis for Quantum Circuits as Classical Planning (full version)

Irfansha Shaik, Jaco van de Pol

In Layout Synthesis, the logical qubits of a quantum circuit are mapped to the physical qubits of a given quantum hardware platform, taking into account the connectivity of physical qubits. This involves inserting SWAP gates before an operation is applied on distant qubits. Optimal Layout Synthesis is crucial for practical Quantum Computing on current error-prone hardware: Minimizing the number of SWAP gates directly mitigates the error rates when running quantum circuits. In recent years, several approaches have been proposed for minimizing the required SWAP insertions. The proposed exact approaches can only scale to a small number of qubits. Proving that a number of swap insertions is optimal is much harder than producing near optimal mappings. In this paper, we provide two encodings for Optimal Layout Synthesis as a classical planning problem. We use optimal classical planners to synthesize the optimal layout for a standard set of benchmarks. Our results show the scalability of our approach compared to previous leading approaches. We can optimally map circuits with 9 qubits onto a 14 qubit platform, which could not be handled before by exact methods.

arXiv:2304.12014•Apr 24, 2023•3 citations

A Beam Search Framework for Quantum Circuit Mapping

Cheng Qiu, Pengcheng Zhu, Lihua Wei

In the era of noisy intermediate-scale quantum (NISQ) computing, the limited connectivity between qubits is one of the common physical limitations faced by current quantum computing devices. Quantum circuit mapping methods transform quantum circuits into equivalent circuits that satisfy physical connectivity constraints by remapping logical qubits, making them executable. The optimization problem of quantum circuit mapping has NP-hard computational complexity, and existing heuristic mapping algorithms still have significant potential for optimization in terms of the number of quantum gates generated. To reduce the number of SWAP gates inserted during mapping, the solution space of the mapping problem is represented as a tree structure, and the mapping process is equivalent to traversing this tree structure. To effectively and efficiently complete the search process, a beam search framework (BSF) is proposed for solving quantum circuit mapping. By iteratively selecting, expanding, and making decisions, high-quality target circuits are generated. Experimental results show that this method can significantly reduce the number of inserted SWAP gates on medium to large circuits, achieving an average reduction of 44% compared to baseline methods, and is applicable to circuits of various sizes and complexities.

Entropy•Feb 24, 2025•1 citation

Pre-processing of quantum circuit mapping based on circuit partitioning and unitary matrix decomposition

Kexin Cao, Xueyun Cheng, Xinyu Chen +1 more

Quantum computing is currently in the era of Noisy-Intermediate-Scale Quantum (NISQ), where superconducting quantum chips can only support two-qubit gates between adjacent physical qubits. This constraint necessitates the insertion of SWAP gates during circuit mapping to ensure that the nearest neighbor requirements are met on actual quantum computing devices. In this work, based on the circuit partitioning and unitary matrix decomposition mechanism, an equivalent transformation form of quantum circuit is given to reduce the number of two-qubit gates in the target quantum circuit. Experimental results demonstrate that the decomposed equivalent circuits have a shorter depth, with an average optimization rate of 18.41%. Our proposed optimization method effectively reduces the number of two-qubit gates in quantum circuits, enhancing the efficiency of mapping on NISQ devices.

International Conference on Electronics, Circuits and Information Engineering (ECIE)•May 24, 2024•0 citations
In recent years, the emergence of the Noisy Intermediate-Scale Quantum (NISQ) era has led to the development of a wide variety of quantum devices, marking a dynamic phase in the field of quantum computing. Despite these advancements, practical applications of quantum computers still face significant challenges, one of the most prominent being the limited connectivity between physical quantum bits (qubits). This limitation requires quantum circuits to be recompiled through layout synthesis before they can be executed on quantum devices. Layout synthesis determines the specific placement of quantum gates within the circuit on the physical hardware. When gates do not align with the connectivity constraints of the device, additional quantum gates must be inserted to remap the qubits, which can negatively affect the circuit’s efficiency and performance. To address this issue, the primary goal of this paper is to enhance the mapping process within layout synthesis, aiming to optimize both the layout and the circuit depth. Experimental results demonstrate that the proposed method effectively reduces the quantum circuit depth, outperforming other existing approaches in terms of efficiency.
Layout synthesis is mapping a quantum circuit to a quantum processor. SWAP gate insertions are needed for scheduling 2-qubit gates only on connected physical qubits. With the ever-increasing number of qubits in NISQ processors, scalable layout synthesis is of utmost importance. With large optimality gaps observed in heuristic approaches, scalable exact methods are needed. While recent exact and near-optimal approaches scale to moderate circuits, large deep circuits are still out of scope. In this work, we propose a SAT encoding based on parallel plans that apply 1 SWAP and a group of CNOTs at each time step. Using domain-specific information, we maintain optimality in parallel plans while scaling to large and deep circuits. From our results, we show the scalability of our approach which significantly outperforms leading exact and near-optimal approaches (up to 100x). For the first time, we can optimally map several 8, 14, and 16 qubit circuits onto 54, 80, and 127 qubit platforms with up to 17 SWAPs. While adding optimal SWAPs, we also report near-optimal depth in our mapped circuits.
In Layout Synthesis, the logical qubits of a quantum circuit are mapped to the physical qubits of a given quantum hardware platform, taking into account the connectivity of physical qubits. This involves inserting SWAP gates before an operation is applied on distant qubits. Optimal Layout Synthesis is crucial for practical Quantum Computing on current error-prone hardware: Minimizing the number of SWAP gates directly mitigates the error rates when running quantum circuits. In recent years, several approaches have been proposed for minimizing the required SWAP insertions. The proposed exact approaches can only scale to a small number of qubits. In this paper, we provide two encodings for Optimal Layout Synthesis as a classical planning problem. We use optimal classical planners to synthesize the optimal layout for a standard set of benchmarks. Our results show the scalability of our approach compared to previous leading approaches. We can optimally map circuits with 9 qubits onto a 14 qubit platform, which could not be handled before by exact methods.
In the era of noisy intermediate-scale quantum (NISQ), executing quantum algorithms on actual quantum devices faces unique challenges. One such challenge is that quantum devices in this era have restricted connectivity: quantum gates are allowed to act only on specific pairs of physical qubits. For this reason, a quantum circuit needs to go through a compiling process called qubit routing before it can be executed on a quantum computer. In this study, we propose a CNOT synthesis method called the token reduction method to solve this problem. The token reduction method works for all quantum computers whose architecture is represented by connected graphs. A major difference between our method and the existing ones is that our method synthesizes a circuit to an output qubit mapping that might be different from the input qubit mapping. The final mapping for the synthesis is determined dynamically during the synthesis process. Results showed that our algorithm consistently outperforms the best publicly accessible algorithm for all of the tested quantum architectures.
In Layout Synthesis, the logical qubits of a quantum circuit are mapped to the physical qubits of a given quantum hardware platform, taking into account the connectivity of physical qubits. This involves inserting SWAP gates before an operation is applied on distant qubits. Optimal Layout Synthesis is crucial for practical Quantum Computing on current error-prone hardware: Minimizing the number of SWAP gates directly mitigates the error rates when running quantum circuits. In recent years, several approaches have been proposed for minimizing the required SWAP insertions. The proposed exact approaches can only scale to a small number of qubits. Proving that a number of swap insertions is optimal is much harder than producing near optimal mappings. In this paper, we provide two encodings for Optimal Layout Synthesis as a classical planning problem. We use optimal classical planners to synthesize the optimal layout for a standard set of benchmarks. Our results show the scalability of our approach compared to previous leading approaches. We can optimally map circuits with 9 qubits onto a 14 qubit platform, which could not be handled before by exact methods.
In the era of noisy intermediate-scale quantum (NISQ) computing, the limited connectivity between qubits is one of the common physical limitations faced by current quantum computing devices. Quantum circuit mapping methods transform quantum circuits into equivalent circuits that satisfy physical connectivity constraints by remapping logical qubits, making them executable. The optimization problem of quantum circuit mapping has NP-hard computational complexity, and existing heuristic mapping algorithms still have significant potential for optimization in terms of the number of quantum gates generated. To reduce the number of SWAP gates inserted during mapping, the solution space of the mapping problem is represented as a tree structure, and the mapping process is equivalent to traversing this tree structure. To effectively and efficiently complete the search process, a beam search framework (BSF) is proposed for solving quantum circuit mapping. By iteratively selecting, expanding, and making decisions, high-quality target circuits are generated. Experimental results show that this method can significantly reduce the number of inserted SWAP gates on medium to large circuits, achieving an average reduction of 44% compared to baseline methods, and is applicable to circuits of various sizes and complexities.
Quantum computing is currently in the era of Noisy-Intermediate-Scale Quantum (NISQ), where superconducting quantum chips can only support two-qubit gates between adjacent physical qubits. This constraint necessitates the insertion of SWAP gates during circuit mapping to ensure that the nearest neighbor requirements are met on actual quantum computing devices. In this work, based on the circuit partitioning and unitary matrix decomposition mechanism, an equivalent transformation form of quantum circuit is given to reduce the number of two-qubit gates in the target quantum circuit. Experimental results demonstrate that the decomposed equivalent circuits have a shorter depth, with an average optimization rate of 18.41%. Our proposed optimization method effectively reduces the number of two-qubit gates in quantum circuits, enhancing the efficiency of mapping on NISQ devices.