Conventional superconducting nanowire single-photon detectors (SNSPDs) have been typically limited in their applications due to their size, weight, and power consumption, which confine their use to laboratory settings. However, with the rapid development of remote imaging, sensing technologies, and long-range quantum communication with fewer topographical constraints, the demand for high-efficiency single-photon detectors integrated with avionic platforms is rapidly growing. We herein designed and manufactured the first drone-based SNSPD system with a system detection efficiency (SDE) as high as 91.8%. This drone-based system incorporates high-performance NbTiN SNSPDs, a self-developed miniature liquid helium dewar, and custom-built integrated electrical setups, making it capable of being launched in complex topographical conditions. Such a drone-based SNSPD system may open the use of SNSPDs for applications that demand high SDE in complex environments.
Conventional superconducting nanowire single-photon detectors (SNSPDs) have been typically limited in their applications due to their size, weight, and power consumption, which confine their use to laboratory settings. However, with the rapid development of remote imaging, sensing technologies, and long-range quantum communication with fewer topographical constraints, the demand for high-efficiency single-photon detectors integrated with avionic platforms is rapidly growing. We herein designed and manufactured the first drone-based SNSPD system with a system detection efficiency (SDE) as high as 91.8%. This drone-based system incorporates high-performance NbTiN SNSPDs, a self-developed miniature liquid helium dewar, and custom-built integrated electrical setups, making it capable of being launched in complex topographical conditions. Such a drone-based SNSPD system may open the use of SNSPDs for applications that demand high SDE in complex environments.
Bounded by the size, weight, and power consumption (SWaP) of conventional superconducting single photon detectors (SSPD), applications of SSPDs were commonly confined in the laboratory. However, booming demands for high efficiency single photon detector incorporated with avionic platforms arise with the development of remote imaging and sensing or long-haul quantum communication without topographical constraints. We herein designed and manufactured the first drone based SSPD system with a SDE as high as 91.8%. This drone based SSPD system is established with high performance NbTiN SSPDs, self-developed miniature liquid helium dewar, and homemade integrated electric setups, which is able to be launched in complex topographical conditions. Such a drone based SSPD system may open the use of SSPDs for applications that demand high-SDE in complex environments.
Facing the demand for applications such as wide-area terrain mapping and space-based atmospheric measurements, there is an urgent need to develop miniaturized single-photon detection systems with low power consumption that can be adapted to airborne platforms. Superconducting nanowire single-photon detectors (SNSPDs) have been applied to quantum information, bioimaging, deep space communication and long-range lidar with the advantages of high quantum efficiency, low dark count rate and fast detection rate. However, traditional SNSPD usually operates at 2.1 K or even lower, and the required cryogenic systems are large in size and weight, which are not easy to apply to airborne platforms. Up to now, there has been no report on SNSPD applied to airborne platforms. How to apply SNSPD to airborne platforms is an urgent problem to be solved. In this work, we design and make an SNSPD with an operating temperature of 4.2 K. The superconducting detector chip is a four-channel photon-number-resolving device with a photosensitive area of 60 μm × 60 μm, which is coupled to a 200-μm-diameter fiber by a beam compression system with a quantum efficiency of 50% at 1064 nm and a temperature of 4.2 K. Finally, the time characteristics of a single channel are tested in response to different photon numbers. The timing jitter of four-photon response is smallest, and the half-height width is 110 ps. This work not only supports airborne applications, but also has positive implications for promoting the development of general-purpose miniaturized SNSPD systems and their applications.
Superconducting nanowire single-photon detectors (SNSPDs) are an enabling technology for myriad quantum-optics experiments that require high-efficiency detection, large count rates, and precise timing resolution. The system detection efficiencies (SDEs) for fiber-coupled SNSPDs have fallen short of theoretical predictions of near unity by at least 7%, with the discrepancy being attributed to scattering, material absorption, and other SNSPD dynamics. We optimize the design and fabrication of an all-dielectric layered stack and fiber coupling package in order to achieve 98.0 ± 0.5 % SDE, measured for single-mode-fiber guided photons derived from a highly attenuated 1550 nm continuous-wave laser. This enforces a smaller bound on the scattering and absorption losses in such systems and opens the use of SNSPDs for scenarios that demand high-SDE for throughput and fidelity.
Ever since superconducting nanowire single-photon detectors (SNSPDs or SSPDs) were demonstrated, they have attracted a considerable attention due to the detectors’ promising performance that includes high detection efficiency (DE), low dark count rate (DCR), broadband sensitivity, and low timing jitter. The system detection efficiency (SDE) has been improved to be over 90% with a wavelength of 1550 nm in a fiber-coupled system by embedding the SNSPD in optical cavities. However, the implementation of optical cavity usually reduces the bandwidth of SNSPDs. As a result, there are some recent works on increasing the bandwidth of SNSPD. Furthermore, the size of the active area of meandered nanowires has to be compatible with the core size of an optical fiber such that good optical coupling can be achieved; this setup requires a long nanowire with a large kinetic inductance, thus resulting in a small counting rate and a large timing jitter, particularly for multi-mode fiber-coupled devices. Nevertheless, a particularly impressive waveguide-coupled SNSPD has been developed in recent years. By placing an SNSPD atop an optical waveguide that has been fabricated on various substrate materials, photons propagating in the waveguide have been found to be evanescently absorbed by nanowires that are only a few tens of microns long. The on-chip DE of this device has been estimated to be over 90%, thus indicating that it has both high absorptance and high intrinsic DE. If the waveguide and the nanowire are correctly dimensioned, the absorptance of this device can reach over 90% for a wavelength range of more than 700 nm. Furthermore, the length of the nanowire is shorter than that of the fiber-coupled SNSPD, thus leading to a higher count rate and lower timing jitter (~18 ps). However, unsatisfactory coupling losses between the optical fiber and the waveguide in such devices can decrease its SDE (~10%), thus limiting its applicability to quantum photonic integrated circuits (QPIC). Recently, we proposed a type of SNSPD that was coupled with microfibers (MFs), and simulations for this SNSPD indicated that its absorption would be as high as 90%. Microfibers and nanofibers, tapered adiabatically from standard fibers, with diameters close to or smaller than the wavelength of the guided light were demonstrated to have low transmittance losses by Tong et al. in 2003. MFs have been shown to have many interesting properties, such as strong evanescent fields, tight optical confinement, wideband abilities, and small masses; these properties are appealing for applications such as optical sensing and coupling. MFs also provide seamless connections with high transmittance from standard fibers; therefore, MF-coupled SNSPDs can achieve both high SDEs and wideband compatibility. We proposed and demonstrated the MF-coupled SNSPDs successfully. The simulation results indicate that with optimal device structure, the optical absorption with efficiency < 90% can be realized over a wavelength range of 350 nm to 2150 nm. The fabricated MF-coupled SNSPD, shows unparalleled broadband system detection efficiencies (SDEs) of more than 50% from 630 nm to 1500 nm. The SDEs reach 66% at 785 nm and 45% at 1550 nm. These results pave the way for ultra-broadband weak light detection with quantum-limit sensitivity.
Superconducting nanowire single-photon detector (SNSPD) with near-unity system efficiency is a key enabling, but still elusive, technology for numerous quantum fundamental theory verifications and quantum information applications. The key challenge is to have both a near-unity photon-response probability and absorption efficiency simultaneously for the meandered nanowire with a finite filling ratio, which is more crucial for NbN than other superconducting materials (e.g., WSi) with lower transition temperatures. Here, we overcome the above challenge and produce NbN SNSPDs with a record system efficiency by replacing a single-layer nanowire with twin-layer nanowires on a dielectric mirror. The detector at 0.8 K shows a maximal system detection efficiency (SDE) of 98% at 1590 nm and a system efficiency of over 95% in the wavelength range of 1530-1630 nm. Moreover, the detector at 2.1 K demonstrates a maximal SDE of 95% at 1550 nm using a compacted two-stage cryocooler. This type of detector also shows the robustness against various parameters, such as the geometrical size of the nanowire and the spectral bandwidth, enabling a high yield of 73% (36%) with an SDE of >80% (90%) at 2.1 K for 45 detectors fabricated in the same run. These SNSPDs made of twin-layer nanowires are of important practical significance for batch production.
Single-photon detectors based on superconducting nanowires (SSPDs or SNSPDs) have rapidly emerged as a highly promising photon-counting technology for infrared wavelengths. These devices offer high efficiency, low dark counts and excellent timing resolution. In this review, we consider the basic SNSPD operating principle and models of device behaviour. We give an overview of the evolution of SNSPD device design and the improvements in performance which have been achieved. We also evaluate device limitations and noise mechanisms. We survey practical refrigeration technologies and optical coupling schemes for SNSPDs. Finally we summarize promising application areas, ranging from quantum cryptography to remote sensing. Our goal is to capture a detailed snapshot of an emerging superconducting detector technology on the threshold of maturity.