Bounded by the size, weight, and power consumption (SWaP) of conventional superconducting single photon detectors (SSPD), applications of SSPDs were commonly confined in the laboratory. However, booming demands for high efficiency single photon detector incorporated with avionic platforms arise with the development of remote imaging and sensing or long-haul quantum communication without topographical constraints. We herein designed and manufactured the first drone based SSPD system with a SDE as high as 91.8%. This drone based SSPD system is established with high performance NbTiN SSPDs, self-developed miniature liquid helium dewar, and homemade integrated electric setups, which is able to be launched in complex topographical conditions. Such a drone based SSPD system may open the use of SSPDs for applications that demand high-SDE in complex environments.
Bounded by the size, weight, and power consumption (SWaP) of conventional superconducting single photon detectors (SSPD), applications of SSPDs were commonly confined in the laboratory. However, booming demands for high efficiency single photon detector incorporated with avionic platforms arise with the development of remote imaging and sensing or long-haul quantum communication without topographical constraints. We herein designed and manufactured the first drone based SSPD system with a SDE as high as 91.8%. This drone based SSPD system is established with high performance NbTiN SSPDs, self-developed miniature liquid helium dewar, and homemade integrated electric setups, which is able to be launched in complex topographical conditions. Such a drone based SSPD system may open the use of SSPDs for applications that demand high-SDE in complex environments.
Conventional superconducting nanowire single-photon detectors (SNSPDs) have been typically limited in their applications due to their size, weight, and power consumption, which confine their use to laboratory settings. However, with the rapid development of remote imaging, sensing technologies, and long-range quantum communication with fewer topographical constraints, the demand for high-efficiency single-photon detectors integrated with avionic platforms is rapidly growing. We herein designed and manufactured the first drone-based SNSPD system with a system detection efficiency (SDE) as high as 91.8%. This drone-based system incorporates high-performance NbTiN SNSPDs, a self-developed miniature liquid helium dewar, and custom-built integrated electrical setups, making it capable of being launched in complex topographical conditions. Such a drone-based SNSPD system may open the use of SNSPDs for applications that demand high SDE in complex environments.
We developed a mobile superconducting strip photon detector (SSPD) system operated in a liquid-helium Dewar. By adopting highly disordered NbTiN thin films, we successfully enhanced the detection performance of superconducting strips at higher operation temperatures and realized SSPDs with nearly saturated detection efficiency at 4.2 K. Then we customized a compact liquid-helium Dewar and a battery-based electronic module to minimize the SSPD system. A mobile SSPD system was integrated, which showed a system detection efficiency of 72% for a 1550 nm wavelength with a dark count rate of 200 cps and a timing jitter of 67.2 ps. The system has a weight of 40 kg and a power consumption of 500 mW, which can work continuously for 20 hours. The metrics can be further optimized in accordance with the various practical application platforms, such as aircraft, drones, etc.
Superconducting single-photon detectors (SSPDs) have developed into a mature device technology and excel due outstanding performance metrics, in particular high detection efficiency combined with high time resolution and low dark count rate for a wide wavelength range from the visible to the mid-infrared. In addition to commercially available systems with devices coupled to optical fibers, SSPDs can be integrated with photonic circuits using scalable nanofabrication technologies. Here, we will present recent progress on SSPDs based on NbTiN thin films and their integration on different photonic material platforms. Our process for NbTiN growth at room temperature will be described, using magnetron reactive co-sputtering to achieve high-quality superconducting layers down to thicknesses of few nanometres. Optimized SSPD devices are realized by tuning the superconducting properties of NbTiN thin films, adjusting the material composition and nanocrystalline structure. The realization of different types of detectors and geometries will be shown, including nanofabrication techniques for achieving fully suspended nanowire structures. Furthermore, we will discuss challenges and prospects for scaling-up SSPD device technology as well as detector systems. Multiplexing schemes such as dispersion engineering of superconducting transmission lines will be highlighted as powerful approach to address multiple detectors and reduce the number of required feedthroughs and electrical lines in the cryostat. Eventually, exemplary applications of SSPDs for photon counting in quantum optics and light detection and ranging (LIDAR) will be outlined.
Superconducting single-photon detectors (SSPDs) are nanostructured devices made from ultrathin superconducting films. They are typically operated at liquid helium temperature and exhibit high detection efficiency, in combination with very low dark counts, fast response time, and extremely low timing jitter, within a broad wavelength range from ultraviolet to mid-infrared (up to 6mum). SSPDs are very attractive for applications such as fiber-based telecommunication, where single-photon sensitivity and high photon-counting rates are required. We review the current state-of-the-art in the SSPD research and development, and compare the SSPD performance to the best semiconducting avalanche photodiodes and other superconducting photon detectors. Furthermore, we demonstrate that SSPDs can also be successfully implemented in photon-energy-resolving experiments. Our approach is based on the fact that the size of the hotspot, a nonsuperconducting region generated upon photon absorption, is linearly dependent on the photon energy. We introduce a statistical method, where, by measuring the SSPD system detection efficiency at different bias currents, we are able to resolve the wavelength of the incident photons with a resolution of 50 nm.
This thesis is about the development of a detector for single photons, particles of light. New techniques are being developed that require high performance single photon detection, such as quantum cryptography, single molecule detection, optical radar, ballistic imaging, circuit testing and fluorescence spectroscopy. Superconducting single photon detectors (SSPDs) are sensitive to single photons from the ultraviolet to the near infrared. In this thesis steps has been taken towards improving this type of detectors and implementing them in experiments. We have fabricated SSPDs in the Van Leeuwenhoek Laboratory at the TU Delft from NbTiN on an oxidized silicon substrate and we show world record system detection efficiencies at telecommunication wavelengths. In addtition, we have adjusted the geometry to get rid of the polarization dependence of the quantum efficiency. SSPDs fabricated from a new material show enhanced efficiency at longer wavelengths. Different read out schemes can scale a single pixel to an array of detectors. We have proven by implementing the SSPDs in a Hanbury-Brown Twiss setup that nanowire quantum dots emit single photons. We also have demonstrated that SSPDs are sensitive to single surface plasmon polaritons and single electrons.
Facing the demand for applications such as wide-area terrain mapping and space-based atmospheric measurements, there is an urgent need to develop miniaturized single-photon detection systems with low power consumption that can be adapted to airborne platforms. Superconducting nanowire single-photon detectors (SNSPDs) have been applied to quantum information, bioimaging, deep space communication and long-range lidar with the advantages of high quantum efficiency, low dark count rate and fast detection rate. However, traditional SNSPD usually operates at 2.1 K or even lower, and the required cryogenic systems are large in size and weight, which are not easy to apply to airborne platforms. Up to now, there has been no report on SNSPD applied to airborne platforms. How to apply SNSPD to airborne platforms is an urgent problem to be solved. In this work, we design and make an SNSPD with an operating temperature of 4.2 K. The superconducting detector chip is a four-channel photon-number-resolving device with a photosensitive area of 60 μm × 60 μm, which is coupled to a 200-μm-diameter fiber by a beam compression system with a quantum efficiency of 50% at 1064 nm and a temperature of 4.2 K. Finally, the time characteristics of a single channel are tested in response to different photon numbers. The timing jitter of four-photon response is smallest, and the half-height width is 110 ps. This work not only supports airborne applications, but also has positive implications for promoting the development of general-purpose miniaturized SNSPD systems and their applications.